SEARCH · Engineering Papers

Results for “materials genome”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Selection Factors for Space Crops

NASA is actively researching space crop production to determine its potential to contribute to food system security on long duration missions beyond Low Earth Orbit. Our near-term focus is on nutrient and variety supplementation of prepackaged food with fresh produce that requires little or no processing. The longer-term goal is caloric replacement to become less dependent on Earth, and this will require cultivation of staple crops, processing and cooking equipment, integration with spacecraft air, water, and power systems, and automation. There are numerous technology and knowledge gaps remaining for sustainable space crop production systems, but one high-impact area is in the development of crops specifically customized to meet the needs of controlled environment crop production, astronaut health and well-being, and space-unique environments. Modern crop breeding and genome engineering tools are allowing for rapid development of new genotypes with incredible specificity. Targeted aspects to optimize crops for space have been identified and characterized into five categories: plant growth and development, plant physiology, produce nutrition, produce organoleptic acceptability, and postharvest characteristics. Within each category there are several targets that further the development of crop production systems for spaceflight, such as crop size and harvest index, tolerance to specific environmental stresses, optimizing target nutrients that are low or degrade in the packaged diet, maintenance time requirements, and less indigestible structural material. NASA-funded PIs are already beginning to develop candidate crops, and spaceflight testing and validation of novel space crops is on the horizon. Crops developed for space also have the potential to benefit terrestrial controlled environment agriculture crop production systems. This research was supported by NASA’s Space Biology and Human Research Programs.

Space Crop Production↗

NASA NTRSDate not supplied

Selection Factors for Space Crops

Space Crop Production↗

DOE OSTI2026

From Reads to Function Workshop - Milano 2026

The Bicocca Sampling Days (BSDs) model offers a reproducible “citizen science” framework integrating research, education, and public engagement through large-scale microbiome sampling, followed by a workshop of data analysis on select samples. We identified 9 bacterial and archaeal metagenome-assembled genomes from six soil samples across three separate sampling days in two approaches with indidivual sample and replicate co-assembly spanning three unique classes, providing genomic insights into microbial nutrient cycling in these systems.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Improving the Transformation Efficiency of Synechococcus sp. PCC 7002 via Methylome-Guided Premethylation of DNA

Cyanobacteria are promising microbial platforms for a diverse set of biotechnology applications, from living materials to photosynthetic chemical production, but are less well characterized than commonly engineered microbes such as Escherichia coli. This study facilitates genetic engineering in Synechococcus sp. PCC 7002, a fast-growing, halotolerant, and naturally competent strain, by identifying ten native methylation motifs and designing shuttle strains that mimic the native methylation state by expressing a subset of heterologous methyltransferases. DNA methylation in E. coli with as few as two active methyltransferases increased transformation efficiency up to 30-fold across four distinct integration sites in PCC 7002. This work provides an experimental framework to bypass native restriction-modification systems for efficient genome editing and metabolic engineering in nonmodel bacteria.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS2002

Plant adaptation to low atmospheric pressures: potential molecular responses

There is an increasing realization that it may be impossible to attain Earth normal atmospheric pressures in orbital, lunar, or Martian greenhouses, simply because the construction materials do not exist to meet the extraordinary constraints imposed by balancing high engineering requirements against high lift costs. This equation essentially dictates that NASA have in place the capability to grow plants at reduced atmospheric pressure. Yet current understanding of plant growth at low pressures is limited to just a few experiments and relatively rudimentary assessments of plant vigor and growth. The tools now exist, however, to make rapid progress toward understanding the fundamental nature of plant responses and adaptations to low pressures, and to develop strategies for mitigating detrimental effects by engineering the growth conditions or by engineering the plants themselves. The genomes of rice and the model plant Arabidopsis thaliana have recently been sequenced in their entirety, and public sector and commercial DNA chips are becoming available such that thousands of genes can be assayed at once. A fundamental understanding of plant responses and adaptation to low pressures can now be approached and translated into procedures and engineering considerations to enhance plant growth at low atmospheric pressures. In anticipation of such studies, we present here the background arguments supporting these contentions, as well as informed speculation about the kinds of molecular physiological responses that might be expected of plants in low-pressure environments.

NASA Discipline Plant Biology↗

DOE OSTI2024

Antarctic lake viromes reveal potential virus associated influences on nutrient cycling in ice-covered lakes

The McMurdo Dry Valleys (MDVs) of Antarctica are a mosaic of extreme habitats which are dominated by microbial life. The MDVs include glacial melt holes, streams, lakes, and soils, which are interconnected through the transfer of energy and flux of inorganic and organic material via wind and hydrology. For the first time, we provide new data on the viral community structure and function in the MDVs through metagenomics of the planktonic and benthic mat communities of Lakes Bonney and Fryxell. Viral taxonomic diversity was compared across lakes and ecological function was investigated by characterizing auxiliary metabolic genes (AMGs) and predicting viral hosts. Our data suggest that viral communities differed between the lakes and among sites: these differences were connected to microbial host communities. AMGs were associated with the potential augmentation of multiple biogeochemical processes in host, most notably with phosphorus acquisition, organic nitrogen acquisition, sulfur oxidation, and photosynthesis. Viral genome abundances containing AMGs differed between the lakes and microbial mats, indicating site specialization. Using procrustes analysis, we also identified significant coupling between viral and bacterial communities (p = 0.001). Finally, host predictions indicate viral host preference among the assembled viromes. Collectively, our data show that: (i) viruses are uniquely distributed through the McMurdo Dry Valley lakes, (ii) their AMGs can contribute to overcoming host nutrient limitation and, (iii) viral and bacterial MDV communities are tightly coupled.

Microbiology↗

DOE OSTI2025

Survey of Thirteen Novel Pseudomonas putida Bacteriophages

Bacteriophages have been widely investigated as a promising treatment of food, medical equipment, and humans colonized by antibiotic-resistant bacteria. Phages pose particular interest in combating those bacteria which form biofilms, such as the medically important human pathogen Pseudomonas aeruginosa and several plant pathogens, including P. syringae . In an undergraduate lab course, P. putida was used as the host to isolate novel anti-pseudomonal bacteriophages. Environmental samples of soil and water were collected, and purified phage isolates were obtained. After Illumina sequencing, genomes of these phages were assembled de novo and annotated. Assembled genomes were compared with known genomes in the literature and GenBank to identify taxonomic relations and to refine their functional annotations. The thirteen phages described are sipho-, myo-, and podoviruses in several families of Caudoviricetes , spanning several novel genera, with genomes ranging from 40,000 to 96,000 bp. One phage (DDSR119) is unique and is the first reported P. putida siphovirus. The remaining 12 can be clustered into four distinct groups. Six are highly related to each other and to previously described Autotranscriptaviridae phages: Waldo5, PlaquesPlease, and Laces98 all belong to the Waldovirus genus, whereas Stalingrad, Bosely, and Stamos belong to the Troedvirus genus. Zuri was previously classified as the founding member of a new genus Zurivirus within the family Schitoviridae . Ebordelon and Holyagarpour each represent different species within Zurivirus , whereas Meara is a more distantly related member of the Schitoviridae . Dolphis and Jeremy are similar enough to form a genus but have only a few distant relatives among sequenced phages and are notable for being temperate. We identified the lysis cassettes in all 13 phages, compared tail spike structures, and found auxiliary metabolic genes in several. Studies like these, which isolate and characterize infectious virions, enable the identification of novel proteins and molecular systems and also provide the raw materials for further study, evaluation, and manipulation of phage proteins and their hosts.

Pseudomonas putida↗

DOE OSTI2025

From bench to biofactory: high-throughput technologies and automated workflows to accelerate biomanufacturing

Microbial production of target molecules has advanced significantly in recent years driven by innovations in enzyme engineering, DNA synthesis, and genomic editing. However, to access the massive potential of microbial production, a vast parametric space remains to be investigated to optimize these biobased processes for a robust bioeconomy. Here, we review the current state of the art, some key challenges and possible solutions. We see a critical role of automation, high-throughput technologies, self-driving and cloud labs, and data management to enable Artificial Intelligence/Machine Learning and mechanistic models to overcome the design space challenges and accelerate the development of novel bio-based solutions. Accurate models will expedite the development and scale-up of engineered microbes for a range of final products from many starting materials.

Petzold, Christopher J↗

DOE OSTI2023

Unleashing the capacity of Rhodococcus for converting lignin into lipids

Bioconversion of bioresources/wastes (e.g., lignin, chemical pulping byproducts) represents a promising approach for developing a bioeconomy to help address growing energy and materials demands. Rhodococcus, a promising microbial strain, utilizes numerous carbon sources to produce lipids, which are precursors for synthesizing biodiesel and aviation fuels. However, compared to chemical conversion, bioconversion involves living cells, which is a more complex system that needs further understanding and upgrading. Various wastes amenable to bioconversion are reviewed herein to highlight the potential of Rhodococci for producing lipid-derived bioproducts. In light of the abundant availability of these substrates, Rhodococcus’ metabolic pathways converting them to lipids are analyzed from a “beginning-to-end” view. Based on an in-depth understanding of microbial metabolic routes, genetic modifications of Rhodococcus by employing emerging tools (e.g., multiplex genome editing, biosensors, and genome-scale metabolic models) are presented for promoting the bioconversion. Co-solvent enhanced lignocellulose fractionation (CELF) strategy facilitates the generation of a lignin-derived aromatic stream suitable for the Rhodococcus’ utilization. Novel alkali sterilization (AS) and elimination of thermal sterilization (ETS) approaches can significantly enhance the bioaccessibility of lignin and its derived aromatics in aqueous fermentation media, which promotes lipid titer significantly. In order to achieve value-added utilization of lignin, biodiesel and aviation fuel synthesis from lignin and lipids are further discussed. In conclusion, the possible directions for unleashing the capacity of Rhodococcus through synergistically modifying microbial strains, substrates, and fermentation processes are proposed toward a sustainable biological lignin valorization.

09 BIOMASS FUELS↗

NASA NTRS1997

The role of clinical pharmacology in molecular genetics

PROBLEM: Discovering the causes of unusual phenotypes in human subjects is an important aspect of patient-oriented research. MATERIAL: The tools of clinical pharmacology are uniquely useful in addressing these problems. PATIENTS, SUBJECTS, OR CASE HISTORIES: We evaluated a 42-year-old patient with lifelong orthostatic hypotension and ptosis of the eyelids. He underwent a series of biochemical, physiological, and pharmacological tests outlined in this article. RESULTS: These studies indicated that sympathetic innervation was intact but that the sympathetic neurotransmitter was dopamine rather than norepinephrine. These results demonstrated that dopamine-beta-hydroxylase deficiency underlies the clinical abnormalities of this patient. CONCLUSION: In selected individuals with unusual phenotypes, the techniques of clinical chemistry and clinical pharmacology can define the nature of the defect at almost the resolution of the human genome.

NASA Discipline Regulatory Physiology↗

DOE OSTI2025

Arsenic Accumulation in Microbial Biomass and the Interpretation of Signals of Early Arsenic‐Based Metabolisms

Carbonaceous particles that concentrate arsenic in microbialites as old as ~3.5 Ga are similar to As-rich organic globules in modern microbialites. The former particles have been interpreted as tracers of As cycling by early microbial metabolisms. However, it is unclear if arsenic accumulation is a consequence of biological activity or passive postmortem binding of arsenic by organic matter during diagenesis in volcanically influenced, As-rich environments. Here, we address this uncertainty by evaluating the concentrations, speciation, and detectability of As in active or heat-killed biofilms formed by cyanobacteria or anoxygenic photosynthetic microbes exposed to environmentally relevant concentrations of As(III) or As(V) (50 μM to 3 mM). The genomes or metagenomes of these biofilms contain genes involved in detoxifying or energy-yielding As metabolisms. Biomass accumulates As from the solution in a concentration-dependent manner and with a preference for oxidized As(V) over As(III). Autoclaved biomass accumulates As even more strongly than active biomass, likely because living biofilms actively detoxify As. Active biofilms oxidize and reduce As and accumulate both As(III) and As(V), whereas a small fraction of As(V) can be reduced in inactive biofilms that bind As during diagenesis. Arsenic enrichments in the biomass are detectable by X-ray based spectroscopy techniques (XRF, EPMA-WDS) that are commonly used to analyze geological materials. These findings enable the reconstruction of past active and passive interactions of microbial biomass with arsenic in fossilized microbial biofilms and microbialites from the early Earth.

Madrigal‐Trejo, David↗

DOE OSTI2023

Engineering osmolysis susceptibility in Cupriavidus necator and Escherichia coli for recovery of intracellular products

Intracellular biomacromolecules, such as industrial enzymes and biopolymers, represent an important class of bio-derived products obtained from bacterial hosts. A common key step in the downstream separation of these biomolecules is lysis of the bacterial cell wall to effect release of cytoplasmic contents. Cell lysis is typically achieved either through mechanical disruption or reagent-based methods, which introduce issues of energy demand, material needs, high costs, and scaling problems. Osmolysis, a cell lysis method that relies on hypoosmotic downshock upon resuspension of cells in distilled water, has been applied for bioseparation of intracellular products from extreme halophiles and mammalian cells. However, most industrial bacterial strains are non-halotolerant and relatively resistant to hypoosmotic cell lysis. To overcome this limitation, we developed two strategies to increase the susceptibility of non-halotolerant hosts to osmolysis using Cupriavidus necator, a strain often used in electromicrobial production, as a prototypical strain. In one strategy, C. necator was evolved to increase its halotolerance from 1.5% to 3.25% (w/v) NaCl through adaptive laboratory evolution, and genes potentially responsible for this phenotypic change were identified by whole genome sequencing. The evolved halotolerant strain experienced an osmolytic efficiency of 47% in distilled water following growth in 3% (w/v) NaCl. In a second strategy, the cells were made susceptible to osmolysis by knocking out the large-conductance mechanosensitive channel (mscL) gene in C. necator. When these strategies were combined by knocking out the mscL gene from the evolved halotolerant strain, greater than 90% osmolytic efficiency was observed upon osmotic downshock. A modified version of this strategy was applied to E. coli BL21 by deleting the mscL and mscS (small-conductance mechanosensitive channel) genes. When grown in medium with 4% NaCl and subsequently resuspended in distilled water, this engineered strain experienced 75% cell lysis, although decreases in cell growth rate due to higher salt concentrations were observed. Our strategy is shown to be a simple and effective way to lyse cells for the purification of intracellular biomacromolecules and may be applicable in many bacteria used for bioproduction.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Hydrazinoacetic acid is a biosynthetic precursor of the bacterially produced nitramine, N -nitroglycine

Nitramines [R(R′)N–NO 2 ; R,R′=H or alkyl] are valuable synthetic products, but knowledge of the biosynthetic processes that generate these compounds is limited. This work sought to elucidate the biosynthesis of a nitramine natural product, N-nitroglycine (NNG) by Streptomyces noursei . Stable isotope studies showed that S. noursei cells supplemented with L-(ε- 15 N)lysine, ( 15 N)glycine, or ( 13 C)hydrazinoacetic acid (HAA) incorporated 67%, 88%, and 67% of the isotope label into NNG, respectively, indicating that these compounds are biosynthetic precursors of NNG. Liquid chromatography coupled tandem mass spectrometry (LC-MS/MS) of 15 N-Lys-labeled NNG confirmed that the nitro nitrogen of NNG originates from Lys. Bioinformatics analysis of the S. noursei genome showed evidence for a biosynthetic gene cluster (BGC) that contained machinery for HAA biosynthesis ( nngKLM ), consistent with the results of the isotope labeling. In vitro reconstitution of the gene products produced HAA. The borders of this BGC were defined by cross-referencing the predicted BGC with previously published differential proteomics data. Furthermore, we show that azaserine is produced alongside NNG in S. noursei cultures, linking the two biosynthetic pathways via a proposed nitrosamine biosynthetic intermediate. Finally, the oxygen balance for NNG is −20.2% for the formation of carbon dioxide (CO 2 ), which is comparable to that of hexahydro-1,3,5- trinitro-1,3,5-triazene (common name: RDX; −21.6%). Crystal structure data of NNG indicate that the unit crystalizes as a pure material, not a hydrate, suggesting a favorable energetic crystallization phase. The combined results suggest a route that, with further development, could lead to sustainable production of energetic nitramines via synthetic biology or biocatalytic approaches.

biosynthesis↗

DOE OSTI2023

Comparison of metagenomes from fermentation of various agroindustrial residues suggests a common model of community organization

The liquid residue resulting from various agroindustrial processes is both rich in organic material and an attractive source to produce a variety of chemicals. Using microbial communities to produce chemicals from these liquid residues is an active area of research, but it is unclear how to deploy microbial communities to produce specific products from the different agroindustrial residues. To address this, we fed anaerobic bioreactors one of several agroindustrial residues (carbohydrate-rich lignocellulosic fermentation conversion residue, xylose, dairy manure hydrolysate, ultra-filtered milk permeate, and thin stillage from a starch bioethanol plant) and inoculated them with a microbial community from an acid-phase digester operated at the wastewater treatment plant in Madison, WI, United States. The bioreactors were monitored over a period of months and sampled to assess microbial community composition and extracellular fermentation products. We obtained metagenome assembled genomes (MAGs) from the microbial communities in each bioreactor and performed comparative genomic analyses to identify common microorganisms, as well as any community members that were unique to each reactor. Collectively, we obtained a dataset of 217 non-redundant MAGs from these bioreactors. This metagenome assembled genome dataset was used to evaluate whether a specific microbial ecology model in which medium chain fatty acids (MCFAs) are simultaneously produced from intermediate products (e.g., lactic acid) and carbohydrates could be applicable to all fermentation systems, regardless of the feedstock. MAGs were classified using a multiclass classification machine learning algorithm into three groups, organisms fermenting the carbohydrates to intermediate products, organisms utilizing the intermediate products to produce MCFAs, and organisms producing MCFAs directly from carbohydrates. This analysis revealed common biological functions among the microbial communities in different bioreactors, and although different microorganisms were enriched depending on the agroindustrial residue tested, the results supported the conclusion that the microbial ecology model tested was appropriate to explain the MCFA production potential from all agricultural residues.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2026

Peptoid-Based Nanosheets Exhibiting Broad Antiviral Activity Against Enveloped RNA Viruses

Enveloped RNA viruses, such as Influenza A (H1N1) and Sindbis virus, pose persistent global health threats due to their high mutation rates, efficient transmission, and frequent drug resistance. By mimicking host cell membrane receptors, multivalent virus inhibitors can block viral attachment, making them promising broad-spectrum antiviral agents. However, most of existing antivirals are often limited by strain specificity, short-lived efficacy, and toxicity. Here, we introduce a broad-spectrum antiviral platform based on highly tunable and biocompatible two-dimensional nanomembranes (2DNMs) self-assembled from amphiphilic peptoids, operating via a non-genomic, mutation-insensitive mechanism. By varying peptoid sequence, we design and synthesize over twenty different 2DNMs with various surface charge and high density of viral-attachment ligands (VALs). The self-assembled architecture of these stable 2DNMs provides cooperative noncovalent multivalent binding to virus particles that result in effective inhibition of viral infection. Screening of variants identified three leads that potently suppressed Influenza A (H1N1) and Sindbis virus infection across median tissue culture infectious dose (TCID50), plaque, RT–qPCR, and immunofluorescence assays, while maintaining >90% cell viability. These nanosheets significantly reduced infectious titers, viral RNA replication, and intracellular viral protein expression, indicating inhibition at early stages of viral entry and propagation. The sequence programmability, chemical robustness, and mutation-insensitive antiviral activity distinguish 2DNMs from traditional antivirals and positions them as a versatile materials platform for antiviral coatings, protective barriers, and prophylactic biomedical applications.

Influenza A virus↗

DOE OSTI2024

Machine and Deep Learning: Artificial Intelligence Application in Biotic and Abiotic Stress Management in Plants

Biotic and abiotic stresses significantly affect plant fitness, resulting in a serious loss in food production. Biotic and abiotic stresses predominantly affect metabolite biosynthesis, gene and protein expression, and genome variations. However, light doses of stress result in the production of positive attributes in crops, like tolerance to stress and biosynthesis of metabolites, called hormesis. Advancement in artificial intelligence (AI) has enabled the development of high-throughput gadgets such as high-resolution imagery sensors and robotic aerial vehicles, i.e., satellites and unmanned aerial vehicles (UAV), to overcome biotic and abiotic stresses. These High throughput (HTP) gadgets produce accurate but big amounts of data. Significant datasets such as transportable array for remotely sensed agriculture and phenotyping reference platform (TERRA-REF) have been developed to forecast abiotic stresses and early detection of biotic stresses. For accurately measuring the model plant stress, tools like Deep Learning (DL) and Machine Learning (ML) have enabled early detection of desirable traits in a large population of breeding material and mitigate plant stresses. In this review, advanced applications of ML and DL in plant biotic and abiotic stress management have been summarized.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS2023

Molecular Identification of Microbial Contaminants

Microorganisms can have significant impacts on the success of NASA’s missions, including the integrity of materials, the reliability of scientific results, and maintenance of crew health. Robust cleaning and sterilization protocols are currently in place in NASA facilities, but agency experts agree that microbial contamination is unavoidable and its impact on NASA’s missions and science must be minimized. Therefore, it is critical to understand: 1) what specific microorganisms are present, 2) how they may impact scientific objectives, and 3) how to select appropriate mitigation strategies. The Marshall Space Flight Center (MSFC) Planetary Protection (PP) microbiology lab historically relied solely upon enumeration of culturable microbial contamination associated with spacecraft materials or cleanrooms. However, this process is time consuming, many microbes cannot be cultured, and very few can be identified with any fidelity using NASA standard microbiological methods. The work described in this white paper includes the establishment of molecular identification capabilities at MSFC, including DNA isolation, amplification, purification, and Sanger sequencing. This capability will not only improve planetary protection efforts at MSFC (i.e. by identifying contaminating microorganisms in cleanrooms or on spacecraft) but also offers a service center-wide for the identification of contaminants that arise in other projects, processing locations, or during set up and roll out of spacecraft. This work also lays the foundation for higher throughput efforts to identify large populations of microbes across the lifetime of a project and serves as the starting point for future work into whole genome sequencing, non-culture based methods, or additional characterization studies. Ultimately, accurate identification informs appropriate mitigation strategies, increasing the chances of success for NASA’s missions and objectives.

C. D. Cassilly↗

DOE OSTI2024

Producing multiple chemicals through biological upcycling of waste poly(ethylene terephthalate)

Poly(ethylene terephthalate) (PET) waste is of low degradability in nature, and its mismanagement threatens numerous ecosystems. To combat the accumulation of waste PET in the biosphere, PET bio-upcycling, which integrates chemical pretreatment to produce PET-derived monomers with their microbial conversion into value-added products, has shown promise. The recently discovered Rhodococcus jostii strain PET (RPET) can metabolically degrade terephthalic acid (TPA) and ethylene glycol (EG) as sole carbon sources, and it has been developed into a microbial chassis for PET upcycling. However, the scarcity of synthetic biology tools, specifically designed for the non-model microbe RPET, limits the development of a microbial cell factory for expanding the repertoire of bioproducts from post-consumer PET. Herein, we describe the development of potent genetic tools for RPET, including (1) two inducible and titratable expression systems for tunable gene expression and (2) Serine Integrase-based Recombinational Tools (SIRT) for genome editing. Using these tools, we systematically engineer the RPET strain to ultimately establish microbial supply chains for producing multiple chemicals, including lycopene, lipids, and succinate, from post-consumer PET waste bottles, achieving the highest titer of lycopene ever reported thus far in RPET (i.e., 22.6 mg/L of lycopene, approximately 10,000-fold higher than that of the wild-type strain). Furthermore, this work highlights the great potential of plastic upcycling as a generalizable means of sustainable production of diverse chemicals.

36 MATERIALS SCIENCE↗