SEARCH · Engineering Papers

Results for “earthquake detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Terrestrial Single-Station Analog for Constraining the Martian Core and Deep Interior: Implications for InSight

We used a terrestrial single-station seismometer to quantify the uncertainty of InSight (INterior explorations using Seismic Investigations, Geodesy and Heat Transport) data for determining Martian core size. To mimic Martian seismicity, we formed a catalog using 917 terrestrial earthquakes, from which we randomly selected events. We stacked ScS amplitudes on modeled arrival times and searched for where ScS produced coherent seismic amplitudes. A core detection was defined by a coherent peak with small offset between predicted and user-selected arrival times. Iterating the detection algorithm with varying signal-to-noise (SNR) ranges and quantity of events determined the selection frequency of each model and quantified core depth uncertainty. Increasing the quantity of events reduced core depth uncertainty while increasing the recovery rate, while increasing event SNR had little effect. Including ScS2 multiples increased the recovery rate and reduced core depth uncertainty when we used low quantities of events. The most-frequent core depths varied by back azimuth, suggesting our method is sensitive to the presence of mantle heterogeneities. When we added 1° in source distance errors, core depth uncertainty increased by up to 11 km and recovery rates decreased by <5%. Altering epicentral distances by 25% added ~35 km of uncertainty and reduced recovery rates to <50% in some cases. From these experiments, we estimate that if InSight can detect five events with high location precision (<10% epicentral distance errors), that there is at least an 88% chance of core depth recovery using ScS alone with uncertainty in core depth approaching 18 km and decreasing as more events are located.

Marusiak, Angela G.↗

NASA NTRS2019

Terrestrial Single-Station Analog for Constraining the Martian Core and Deep Interior: Implications for InSight

We used a terrestrial single-station seismometer to quantify the uncertainty of InSight (INterior explorations using Seismic Investigations, Geodesy and Heat Transport) data for determining Martian core size. To mimic Martian seismicity, we formed a catalog using 917 terrestrial earthquakes, from which we randomly selected events. We stacked ScS amplitudes on modeled arrival times and searched for where ScS produced coherent seismic amplitudes. A core detection was defined by a coherent peak with small offset between predicted and user-selected arrival times. Iterating the detection algorithm with varying signal-to-noise (SNR) ranges and quantity of events determined the selection frequency of each model and quantified core depth uncertainty. Increasing the quantity of events reduced core depth uncertainty while increasing the recovery rate, while increasing event SNR had little effect. Including ScS2 multiples increased the recovery rate and reduced core depth uncertainty when we used low quantities of events. The most-frequent core depths varied by back azimuth, suggesting our method is sensitive to the presence of mantle heterogeneities. When we added 1° in source distance errors, core depth uncertainty increased by up to 11 km and recovery rates decreased by <5%. Altering epicentral distances by 25% added ~35 km of uncertainty and reduced recovery rates to <50% in some cases. From these experiments, we estimate that if InSight can detect five events with high location precision (< 10% epicentral distance errors), that there is at least an 88% chance of core depth recovery using ScS alone with uncertainty in core depth approaching 18 km and decreasing as more events are located.

Angela G Marusiak↗

DOE OSTI2020

Deformation Precursors to Catastrophic Failure in Rocks

Forecasting the timing of catastrophic failure, such as crustal earthquakes, has been a central concern for centuries. Such forecasting requires identifying signals that evolve or accelerate in the precursory phase leading to failure, and the subset of signals that may be detected in the crust. We develop machine learning models to predict the proximity of catastrophic failure in synchrotron X-ray tomography triaxial compression experiments on rocks using characteristics of evolving fracture networks. We then examine the characteristics that most strongly influence the model results, and thus may be considered the best predictors of the proximity of macroscopic failure. Finally, the resulting suite of predictive parameters underscores the importance of dilation in the precursory phase leading to catastrophic failure. The results indicate that the evolution of the strain energy density field may provide more robust predictions of the proximity of failure than other existing metrics of rock deformation.

58 GEOSCIENCES↗

NASA NTRS1998

Ionospheric Signature of Surface Mine Blasts from Global Positioning System Measurements

Sources such as atmospheric or buried explosions and shallow earthquakes are known to produce infrasonic pressure waves in the atmosphere. Because of the coupling between neutral particles and electrons at ionospheric altitudes, these acoustic and gravity waves induce variations of the ionospheric electron density. The Global Positioning System (GPS) provides a way of directly measuring the total electron content in the ionosphere and, therefore, of detecting such perturbations in the upper atmosphere. In July and August 1996, three large surface mine blasts (1.5 Kt each) were detonated at the Black Thunder coal mine in eastern Wyoming. As part of a seismic and acoustic monitoring- experiment, we deployed five dual-frequency GPS receivers at distances ranging from 50 to 200 km from the mine and were able to detect the ionospheric perturbation caused by the blasts. The perturbation starts 10 to 15 min after the blast, lasts for about 30 min, and propagates with an apparent horizontal velocity of 1200 meters per second. Its amplitude reaches 3 x 10 (exp 14) el per square meters in the 7-3 min period band, a value close to the ionospheric perturbation caused by the M = 6.7 Northridge earthquake. The small signal-to-noise ratio of the perturbation can be improved by slant-stacking the electron content time-series recorded by the different GPS receivers taking into account the horizontal propagation of the perturbation. The energy of the perturbation is concentrated in the 200 to 300 second period band, a result consistent with previous observations and numerical model predictions. The 300 second band probably corresponds to gravity modes and shorter periods to acoustic modes, respectively. Using a 1-D stratified velocity model of the atmosphere we show that linear acoustic ray tracing fits arrival times at all GPS receivers. We interpret the perturbation as a direct acoustic wave caused by the explosion itself. This study shows that even relatively small subsurface events can produce ionospheric perturbations that are above the detection threshold of the GPS technique. By sensing derivative signals, which can be detected over a relatively broad region, it appears that GPS might be particularly useful for source characterization within the first acoustic quiet zone where infrasound would probably be ineffective. This suggests that dual-frequency GPS monitoring could contribute to Comprehensive Nuclear Test Ban Treaty verification.

Calais, Eric↗

DOE OSTI2022

Bayesian Seismoacoustic Source Location: Acoustic Approach

Seismic waves and infrasound are key technologies in the International Monitoring System (IMS) to monitor explosive events in the solid Earth and atmosphere. Energetic man-made or natural events (e.g., chemical/nuclear explosions, volcanic eruptions, and earthquakes) near the Earth’s surface produce both ground motion and atmospheric pressure disturbances which propagate as seismic waves and infrasound, respectively. Seismic waves have been generally used to detect and identify underground and near-surface events (Myers, et. al., 2007), and infrasound are sensitive to events near the surface or in the atmosphere (Modrak et. al., 2010). Due to their different sensitivities to events, they can complement to each other to improve the event detection and discrimination. The framework of joint seismoacoustic event location has recently reviewed by theoretical research (Koch and Arrowsmith, 2019). Although the early applications showed promising results to improve the accuracy of event location, their application were still limited to a small set of events selected to prove the concepts, and practical capability of the method for operational purpose is not fully evaluated with data. Our final goal is to apply the method of seismoacoustic event location to a larger set of events and evaluate its applicability for operational event location in practice. To that end, we focus on developing and verifying acoustic source location method in this study.

58 GEOSCIENCES↗

NASA NTRS1988

Radio-Frequency Strain Monitor

Radio-frequency (RF) strain monitor developed to measure lengths of objects. RF waveguide or cable bonded to structure monitored. Propagation of RF signal along waveguide results in phase shift proportional to length of path traveled. Impedance mismatches placed in RF cable at nodes of structure. Records mismatches and detects overall length of line and lengths of intervals between nodes. Used to detect changes in elements of large structure with single cable. Monitor has potential for many applications, including monitoring stability of such large structures as aircraft, bridges, and buildings in Earthquake zones.

Heyman, Joseph S.↗

NASA NTRS1989

Volcanic eruptions and solar activity

The historical record of large volcanic eruptions from 1500 to 1980 is subjected to detailed time series analysis. In two weak but probably statistically significant periodicities of about 11 and 80 yr, the frequency of volcanic eruptions increases (decreases) slightly around the times of solar minimum (maximum). Time series analysis of the volcanogenic acidities in a deep ice core from Greenland reveals several very long periods ranging from about 80 to about 350 yr which are similar to the very slow solar cycles previously detected in auroral and C-14 records. Solar flares may cause changes in atmospheric circulation patterns that abruptly alter the earth's spin. The resulting jolt probably triggers small earthquakes which affect volcanism.

Stothers, Richard B.↗

DOE OSTI2021

Nowcasting Earthquakes: Imaging the Earthquake Cycle in California With Machine Learning

We propose a new machine learning-based method for nowcasting earthquakes to image the time-dependent earthquake cycle. The result is a timeseries that may correspond to the process of stress accumulation and release. The timeseries are constructed by using principal component analysis of regional seismicity. The patterns are found as eigenvectors of the cross-correlation matrix of a collection of seismicity timeseries in a coarse grained regional spatial grid (pattern recognition via unsupervised machine learning). The eigenvalues of this matrix represent the relative importance of the various eigenpatterns. Using the eigenvectors and eigenvalues, we compute the weighted correlation timeseries of the regional seismicity. This timeseries has the property that the weighted correlation generally decreases prior to major earthquakes in the region, and increases suddenly just after a major earthquake occurs. As in a previous paper, we find that this method produces a nowcasting timeseries that resembles the hypothesized regional stress accumulation and release process characterizing the earthquake cycle. We then address the problem of whether the timeseries contain information regarding future large earthquakes. For this, we compute a receiver operating characteristic and determine the decision thresholds for several future time periods of interest (optimization via supervised machine learning). We find that signals can be detected that can be used to characterize the information content of the timeseries. These signals may be useful in assessing present and near-future seismic hazards.

58 GEOSCIENCES↗

DOE OSTI2023

River thorium concentrations can record bedrock fracture processes including some triggered by distant seismic events

Fractures are integral to the hydrology and geochemistry of watersheds, but our understanding of fracture dynamics is very limited because of the challenge of monitoring the subsurface. Here we provide evidence that long-term, high-frequency measurements of the river concentration of the ultra-trace element thorium (Th) can provide a signature of bedrock fracture processes spanning neighboring watersheds in Colorado. River Th concentrations show abrupt (subdaily) excursions and biexponential decay with approximately 1-day and 1-week time constants, concentration patterns that are distinct from all other solutes except beryllium and arsenic. The patterns are uncorrelated with daily precipitation records or seasonal trends in atmospheric deposition. Groundwater Th analyses are consistent with bedrock release and dilution upon mixing with river water. Most Th excursions have no seismic signatures that are detectable 50 km from the site, suggesting the Th concentrations can reveal aseismic fracture or fault events. We find, however, a weak statistical correlation between Th and seismic motion caused by distant earthquakes, possibly the first chemical signature of dynamic earthquake triggering, a phenomenon previously identified only through geophysical methods.

58 GEOSCIENCES↗

DOE OSTI2025

Postearthquake Damage Mapping via Remote Sensing: Lessons From the 2023 Türkiye Disaster

This review addresses the urgent need for scalable, accurate, and reproducible remote sensing solutions following the February 2023 Türkiye earthquakes. It synthesizes the contributions of five peer-reviewed studies published in the IEEE JSTARS Special Issue on postearthquake damage and risk assessment. These studies cover areas such as damage classification with deep learning, fusion of multisource remote sensing data, creation of benchmark datasets, detailed damage mapping, and analysis of geophysical signals using outgoing longwave radiation. The article summarizes the methodological approaches and the practical relevance of the reviewed studies for detecting, evaluating, and quantifying damage, and outlines key challenges, including model generalization, class ambiguity, and data integration. It also discusses emerging trends, including explainable artificial intelligence, multimodal data fusion, and open-data platforms. This synthesis provides a foundation for building robust, interpretable, and real-time disaster response systems and aims to guide future research in earthquake-related Earth observation and rapid damage assessment.

Taskin, Gulsen [Istanbul Technical University] (OR↗

NASA NTRS2020

InSAR-based detection method for mapping and monitoring slow-moving landslides in remote regions with steep and mountainous terrain: An application to Nepal

Mapping and monitoring landslides in remote areas with steep and mountainous terrain is logistically challenging, expensive, and time consuming. Yet, in order to mitigate hazards and prevent loss of life in these areas, and to better understand landslide processes, high-resolution measurements of landslide activity are necessary. Satellite-based synthetic aperture radar interferometry (InSAR) provides millimeter-scale measurements of ground surface deformation that can be used to identify and monitor landslides in remote areas where ground-based monitoring techniques are not feasible. Here we present a novel InSAR deformation detection approach, which uses double difference time-series with local and regional spatial filters and pixel clustering methods to identify and monitor slow-moving landslides without making a priori assumptions of the location of landslides. We apply our analysis to freely available Copernicus Sentinel-1 satellite data acquired between 2014 and 2017 centered on the Trishuli River drainage basin in Nepal. We found a minimum of 6 slow-moving landslides that all occur within the Ranimatta lithologic formation (phyllites, metasandstones, meta basics). These landslides have areas ranging from 0.39 to 1.66 sq.km and long-term dry-season displacement rates ranging from 2.1 to 8.8 cm/yr. Due to periods of low coherence during the monsoon season (June – September) each year, and following the 25 April 2015 Mw7.8 Gorkha earthquake, our time series analysis is limited to the 2014-2015 and 2016-2017 dry seasons (September - May). We found that each of the landslides displayed slightly higher rates during the 2014 period, likely as a result of higher cumulative rainfall that fell during the 2014 monsoon season. Although we do not have high quality InSAR data to show the landslide evolution directly following the Gorkha earthquake, the similar rates of movement before (2014-2015) and after (2016-2017) Gorkha suggest the earthquake had negligible long-term impact on these landslides. Our findings highlight the potential for region-wide mapping of slow-moving l and slides using freely available remote sensing data in remote areas such as Nepal and future work will benefit from expanding our methodology to other regions around the world.

Synthetic Aperture Radar↗

DOE OSTI2024

Detection of thin film phase transformations at high-pressure and high-temperature in a diamond anvil cell

Abstract Quantifying how grain size and/or deviatoric stress impact (Mg,Fe) 2 SiO 4 phase stability is critical for advancing our understanding of subduction processes and deep-focus earthquakes. Here, we demonstrate that well-resolved X-ray diffraction patterns can be obtained on nano-grained thin films within laser-heated diamond anvil cells (DACs) at hydrostatic pressures up to 24 GPa and temperatures up to 2300 K. Combined with well-established literature processes for tuning thin film grain size, biaxial stress, and substrate identity, these results suggest that DAC-loaded thin films can be useful for determining how grain size, deviatoric stress, and/or the coexistence of other phases influence high-pressure phase stability. As such, this novel DAC-loaded thin film approach may find use in a variety of earth science, planetary science, solid-state physics, and materials science applications.

Environmental Sciences & Ecology↗

NASA NTRS1980

Space Borne Event Timer

The Space Borne Event Timer is a part of the NASA laser ranging system that is intended to operate aboard the Space Shuttle orbiting over California. The object is to measure, by laser ranging, the earth movement along the San Andreas fault and possibly forecast future earthquakes. A number of cube reflector targets will be placed along both sides of the fault. The ranging system aboard the Space Shuttle will fire a burst of laser pulses at each target and detect the reflected light. Time differences between pulses from the two sides of the fault will indicate earth displacements. The Space Borne Event Timer is a CAMAC compatible system that provides extremely accurate timing data and controls the operation of the ranging system. For each event the time is given in 19.53 increments from the instant of firing the laser to the instant the reflected light is received back, within a range of 130 days.

Turko, B.↗

DOE OSTI2023

How Dynamic Time Warping Can Assist Conventional Cross-correlation

Waveform cross-correlation is a sensitive phase-matched filtering technique that can detect seismic events for nuclear explosion monitoring. However, there are outstanding challenges with correlation detectors, most notably a direct dependence on the completeness of the waveform template library. To ameliorate these challenges, we investigate how dynamic time warping (DTW) may make waveform correlation more robust. DTW analyzes the differences between two time series and attempts to “warp” one time series relative to another in a recursive manner. We apply DTW to synthetic earthquake and recorded explosion templates to expand the capability of correlation detectors. We explore what conditions (e.g., source, station distance, frequency bands) and/or DTW algorithms generate stronger correlation scores. We show that DTW performs well on noisy signals and can dramatically improve the cross-correlation coefficient between a template and data-stream waveform. We conclude with recommendations on how to utilize DTW in nuclear monitoring detection.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2020

Resiliency-Driven Proactive Distribution System Reconfiguration With Synchrophasor Data

Measuring and enabling resiliency of electric distribution systems with increasing weather and cyber events are important. Some of the extreme events (e.g. Earthquakes, Hurricanes) and associated paths are predicted and monitored closely in advance and allow to take pre-event proactive control actions. The Distribution Phasor Measurement Units (D-PMUs) provide new opportunities and supporting such proactive actions. Here, a synchrophasor based resiliency driven pre-event reconfiguration can ensure minimizing impact of the expected event on the power distribution system and associated performance. However, the D-PMUs will also face challenges in terms of data quality similar to the transmission PMUs. The focus of this paper is to provide data mining approaches for anomaly detection in D-PMUs and proposing resiliency-driven pre-event reconfiguration with islanding as a proactive mechanisms to minimize the impact of adverse events on system using processed synchrophasors data. Results are validated for real industrial feeders and test cases with satisfactory response

controlled islanding↗

DOE OSTI2025

MTUQ: a framework for estimating moment tensors, point forces, and their uncertainties

SUMMARY We introduce MTUQ, an open-source Python package for seismic source estimation and uncertainty quantification, emphasizing flexibility and operational scalability. MTUQ provides MPI-parallelized grid search and global optimization capabilities, compatibility with 1-D and 3-D Green’s function database formats, customizable data processing, C-accelerated waveform and first-motion polarity misfit functions, and utilities for plotting seismic waveforms and visualizing misfit and likelihood surfaces. Applicability to a range of full- and constrained-moment tensor, point force, and centroid inversion problems is possible via a documented application programming interface, accompanied by example scripts and integration tests. We demonstrate the software using three different types of seismic events: (1) a 2009 intraslab earthquake near Anchorage, Alaska; (2) an episode of the 2021 Barry Arm landslide in Alaska; and (3) the 2017 Democratic People’s Republic of Korea underground nuclear test. With these events, we illustrate the well-known complementary character of body waves, surface waves, and polarities for constraining source parameters. We also convey the distinct misfit patterns that arise from each individual data type, the importance of uncertainty quantification for detecting multimodal or otherwise poorly constrained solutions, and the software’s flexible, modular design.

58 GEOSCIENCES↗

DOE OSTI2022

A Wrapper to Use a Machine-Learning-Based Algorithm for Earthquake Monitoring

Seismology is one of the main sciences used to monitor volcanic activity worldwide. Fast, efficient, and accurate seismicity detectors are crucial to assess the activity level of a volcano in near–real time and to issue timely warnings. Traditional real–time seismic processing software uses phase onset pickers followed by a phase association algorithm to declare an event and estimate its location. The pickers typically do not identify whether the detected phase is a P or S arrival, which can have a negative impact on hypocentral location quality and complicates phase association. We implemented the deep–neural–network–based method PhaseNet to identify in real time P and S seismic waves on data from one– and three–component seismometers. We tuned the Earthworm binder_ew associator module to use the phase identification from PhaseNet to detect and locate the events, which we archive in a SeisComP3 database. We assessed the performance of the algorithm by comparing the results with existing catalogs built to monitor seismic and volcanic activity in Mayotte and the Lesser Antilles region. Our algorithm, which we refer to as PhaseWorm, showed promising results in both contexts and clearly outperformed the previous automatic method implemented in Mayotte. As a result, this innovative real–time processing system is now operational for seismicity monitoring in Mayotte and Martinique.

58 GEOSCIENCES↗

DOE OSTI2024

High-resolution source imaging and moment tensor estimation of acoustic emissions during brittle creep of basalt undergoing carbonation

SUMMARY As the high-frequency analogue to field-scale earthquakes, acoustic emissions (AEs) provide a valuable complement to study rock deformation mechanisms. During the load-stepping creep experiments with CO2-saturated water injection into a basaltic sample from Carbfix site in Iceland, 8791 AE events are detected by at least one of the seven piezoelectric sensors. Here, we apply a cross-correlation-based source imaging method, called geometric-mean reverse-time migration (GmRTM) to locate those AE events. Besides the attractive picking-free feature shared with other waveform-based methods (e.g. time-reversal imaging), GmRTM is advantageous in generating high-resolution source images with reduced imaging artefacts, especially for experiments with relatively sparse receivers. In general, the imaged AE locations are found to be scattered across the sample, suggesting a complicated fracture network rather than a well-defined major shear fracture plane, in agreement with X-ray computed tomography imaging results after retrieval of samples from the deformation apparatus. Clustering the events in space and time using the nearest-neighbour approach revealed a group of ‘repeaters’, which are spatially co-located over an elongated period of time and likely indicate crack, or shear band growth. Furthermore, we select 2196 AE events with high signal-to-noise-ratio (SNR) and conduct moment tensor estimation using the adjoint (backpropagated) strain tensor fields at the locations of AE sources. The resulting AE locations and focal mechanisms support our previously assertion that creep of basalt at the experimental conditions is accommodated dominantly by distributed microcracking.

58 GEOSCIENCES↗