Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nonlinear spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Dynamics of the water-plasma interface in various discharge modes of atmospheric-pressure plasmas

This paper presents an experimental study of the dynamics of the water-plasma interface during the interaction high-voltage (HV) atmospheric pressure discharge with the water surface. Under the influence of the voltage applied to the pin type electrode, discharges are formed at the air layer between the sharp-tip HV electrode and deionized water. Three discharge regimes were identified from synchronized electrical waveforms and imaging: (i) a weak linear regime at 3–10.6 kV, (ii) a branching streamer regime at the maximum applied voltage of 12.6 kV, and (iii) a continuous arc-like regime occurring during the transition to lower voltage and higher current (e.g., U ≈ 3.2 kV, I ≈ 4.07 mA). High-speed shadowgraph images showed a symmetric interfacial cavity whose depth increased nonlinearly with voltage from h 0 ≈ 0.1 mm at 3 kV to h 0 ≈ 2.7 mm at 10.6 kV, reaching a maximum depth of h 0 ≈ 5.9 mm at 12.6 kV, while the cavity disappeared in the continuous-channel regime and was replaced by outward-propagating wave-like motion. The deformation of the water surface during the discharge-water interaction is governed by the balance between electric field forces, surface tension, gravitational forces, and electrohydrodynamic forces, whose relative contributions vary with the applied voltage. This effect was explained by quantitatively estimating the magnitudes of the acting forces and establishing the force balance. Optical emission spectroscopy in the continuous-channel regime indicated air plasma signatures and yielded a gas temperature of approximately 400 K, while prolonged operation (≈ 20 min) increased the water temperature to ~ 70 °C, reduced the water-layer thickness from 6 mm to 3 mm, and decreased pH from 7 to 4. These regime-resolved, quantitative results clarify how the dominant interfacial forcing shifts with discharge mode and provide a mechanistic basis for controlling plasma-water interactions in atmospheric-pressure applications.

atmospheric pressure plasma↗
NASA NTRS2017

Rotational Raman-Based Temperature Measurements in a High-Velocity Turbulent Jet

Spontaneous rotational Raman scattering spectroscopy is used to acquire the first ever high quality, spatially-resolved measurements of the mean and root mean square (rms) temperature fluctuations in turbulent, high-velocity heated jets. Raman spectra in air were obtained across a matrix of radial and axial locations downstream from a 50 mm diameter nozzle operating from subsonic to supersonic conditions over a wide range of temperatures and Mach numbers, in accordance with the Tanna matrix frequently used in jet noise studies. These data were acquired in the hostile, high noise (115 dB) environment of a large scale open air test facility at NASA Glenn Research Center (GRC). Temperature estimates were determined by performing nonlinear least squares fitting of the single shot spectra to the theoretical rotational Stokes spectra of N2 and O2, using a custom in-house code developed specifically for this investigation. The laser employed in this study was a high energy, long-pulsed, frequency doubled Nd:YAG laser. One thousand single-shot spectra were acquired at each spatial coordinate. Mean temperature and rms temperature variations were calculated at each measurement location. Excellent agreement between the averaged and single-shot temperatures was observed with an accuracy better than 2.5 percent for temperature, and rms variations in temperature between +/-2.2 percent at 296 K and +/-4.5 percent at 850 K. The results of this and planned follow-on studies will support NASA GRC's development of physics-based jet noise prediction, turbulence modeling and aeroacoustic source modeling codes.

Randy J Locke↗
NASA NTRS2017

Rotational Raman-Based Temperature Measurements in a High-Velocity Turbulent Jet

Spontaneous rotational Raman scattering spectroscopy is used to acquire the first ever high quality, spatially-resolved measurements of the mean and root mean square (rms) temperature fluctuations in turbulent, high-velocity heated jets. Raman spectra in air were obtained across a matrix of radial and axial locations downstream from a 50 mm diameter nozzle operating from subsonic to supersonic conditions over a wide range of temperatures and Mach numbers, in accordance with the Tanna matrix frequently used in jet noise studies. These data were acquired in the hostile, high noise (115 dB) environment of a large scale open air test facility at NASA Glenn Research Center (GRC). Temperature estimates were determined by performing nonlinear least squares fitting of the single shot spectra to the theoretical rotational Stokes spectra of N2 and O2, using a custom in-house code developed specifically for this investigation. The laser employed in this study was a high energy, long-pulsed, frequency doubled Nd:YAG laser. One thousand single-shot spectra were acquired at each spatial coordinate. Mean temperature and rms temperature variations were calculated at each measurement location. Excellent agreement between the averaged and single-shot temperatures was observed with an accuracy better than 2.5 percent for temperature, and rms variations in temperature between +/-2.2 percent at 296 K and +/-4.5 percent at 850 K. The results of this and planned follow-on studies will support NASA GRC's development of physics-based jet noise prediction, turbulence modeling and aeroacoustic source modeling codes.

Randy J Locke↗
DOE OSTI2024

Unraveling the magnetic ground state in the alkali-metal lanthanide oxide Na 2 ⁢Pr⁡O 3

Here, a comprehensive set of muon spin spectroscopy and neutron scattering measurements supported by ab initio and model Hamiltonian simulations have been used to investigate the magnetic ground state of Na 2 ⁢PrO 3 . μSR reveals a Néel antiferromagnetic order below T N ~ 4.9K, with a small static magnetic moment m static ≤ 0.22 μ B /Pr collinearly aligned along the c axis. Inelastic neutron measurements reveal the full spectrum of crystal field excitations and confirm that the Pr 4+ ground-state wave function deviates significantly from the Γ 7 limit that is relevant to the Kitaev model. Single- and two-magnon excitations are observed in the ordered state below T N =4.6K and are well described by nonlinear spin wave theory from the Néel state using a magnetic Hamiltonian with Heisenberg exchange J=1 meV and symmetric anisotropic exchange Γ/J=0.1, corresponding to an XY model. Intense two magnon excitations are accounted for by g-factor anisotropy g z /g ± = 1.29. A fluctuating moment δm 2 = 0.57 ⁢(22) ⁢μ$^2_B$/Pr extracted from the energy and momentum integrated inelastic neutron signal is reduced from expectations for a local J = 1/2 moment with average g factor g avg ≈ 1.1. Together, the results demonstrate that the small moment in Na 2 ⁢PrO 3 arises from crystal field and covalency effects and the material does not exhibit significant quantum fluctuations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Single-shot measurements of shaped XUV FEL pulses with frequency-resolved optical gating

The ability to control the amplitude and phase of extreme ultraviolet (XUV) and X-ray free-electron laser (FEL) pulses can allow for the extension of optical techniques, such as multidimensional spectroscopy or coherent control, to higher photon energies, for probing and controlling core electronic transitions. However, this requires the ability to make single-shot, and complete, electric field measurements of potentially complex FEL pulses, in order to develop, and verify, pulse shaping strategies. Here, we present direct, single-shot measurements of XUV pulses generated under special operating configurations for producing specific pulse shapes from a laser-seeded XUV FEL. To do this, we built upon our past work using transient grating (TG) cross correlation frequency-resolved optical gating (FROG), where an optical reference pulse is diffracted from an XUV TG produced by a pair of interfering FEL pulses. The resulting nonlinear signal versus frequency and delay, i.e., the FROG trace, contains the electric field of the FEL pulse. The FEL pulse electric field is reconstructed from the FROG trace using a phase retrieval algorithm. Here we confirmed three different pulse shaping strategies for generating chirped, double and multiple FEL pulses by tuning the seed laser and FEL parameters and measuring the resulting shaped FEL pulses with TG XFROG. This work paves the way for generating on-demand pulse shapes with a seeded FEL by improving the characterization of FEL pulses, for transform-limited to more complex shapes.

Elverson, Francesca↗
DOE OSTI2024

Insights into Tetravalent Np Speciation in HNO 3 through Spectroelectrochemistry and Multivariate Analysis

In situ optical spectroscopy, spectropotentiometry, and multivariate analysis were applied to the Np(IV) nitrate system to better understand speciation and quantify HNO 3 concentration. Thin-layer spectropotentiometry, or spectroelectrochemistry, was leveraged to isolate and stabilize Np(IV) without compromising the solution conditions and generate representative Vis-NIR absorption spectra from 0.5 to 10 M HNO 3 and benchmark the corresponding Np(IV) molar absorptivity coefficients. Spectra were described with principal component analysis (PCA) to identify the purest Np(IV) absorbance spectra among other oxidation states [e.g., Np(V/VI)] at each acid concentration and then to identify the primary sources of variance within each Np(IV) spectrum with respect to Np(IV) nitrate complexes. Then, partial least-squares regression (PLSR) and support vector regression (SVR) models were built to predict HNO 3 concentration from the Np(IV) spectral data. The nonlinear SVR model outperformed the linear PLSR model for the HNO 3 concentration predictions. Finally, the inclusion of spectra collected in edge and center point HNO 3 concentrations in the calibration set was determined to be crucial for producing models with strong predictive capabilities. The multivariate approach used in this study makes it possible to quantify HNO 3 concentration solely based on Np(IV) absorption spectra, which is essential to quantifying processing streams in various online monitoring applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1999

Super Photon Counters

The perfect photon detector would measure the arrival time, the energy, the polarization, and the position of every arriving quantum, but that is easier said than done. Two groups have now succeeded in doing time-resolved spectroscopy on the Crab Nebula pulsar, measuring everything but the polarization, with reports from Romani et al. at Stanford and from Perryman et al. at ESTEC. Both groups use superconducting detectors to gain the necessary speed and sensitivity. The photon can heat the electrons in a superconductor biased in the middle of its resistive transition, or break bound superconducting electron-hole pairs, which can then be collected. Three years ago, Peacock et al. reported that they had detected single optical photons with a superconducting tunnel junction (STJ), and Paresce wrote a News and Views article. A tunnel junction uses two pieces of conductive material, separated by a tiny gap of insulating material or even vacuum. If the gap is thin enough, electrons can tunnel across anyway, and if the conductors are superconductors, the junction displays very useful quantum mechanical properties and electrical nonlinearities. Amplifiers, detectors, oscillators, and computer circuits can all be made from them. Their special advantage is that they operate at very low temperatures, dissipate very little power, operate very fast, and are very small.

Mather, John↗
NASA NTRS2020

High Resolution Photoexcitation Measurements Exacerbate the Long-Standing Fe XVII Oscillator Strength Problem

For more than 40 years, most astrophysical observations and laboratory studies of two key soft x-ray diagnostic 2p - 3d transitions, 3C and 3D, in Fe XVII ions found oscillator strength rations f(3C)/f(3D) disagreeing with theory, but uncertainties had precluded definitive statements on this much studied conundrum. Here, we resonantly excite these lines using synchrotron radiation at PETRA III, and reach, at a millionfold lower photon intensities, a 10 times higher spectral resolution, and 3 times smaller uncertainty than earlier work. Our final result of f(3C)/f(3D) = 3.09(8)(6) supports many of the earlier clean astrophysical and laboratory observations, while departing by five sigmas from our own newest large-scale ab initio calculations, and excluding all proposed explanations, including those invoking nonlinear effects and population transfers.

Electron-ion collisions↗
DOE OSTI2024

Intercalation-Induced Topotactic Phase Transformation of Tungsten Disulfide Crystals

Recent research has demonstrated the potential for topological superconductivity, anisotropic Majorana bound states, optical nonlinearity, and enhanced electrochemical activity for transition metal dichalcogenides (TMDs) with a 2M structure. These unique TMD compounds exhibit metastability and, upon heating, undergo a transition to the thermodynamically stable 2H phase. The 2M phase is commonly made at high temperatures using traditional solid-state methods, and this metastability further complicates the growth of large 2M WS 2 crystals. Herein, a novel synthetic method was developed, focusing on a molten salt reaction to synthesize large 2H crystals and then inducing transformation to the 2M phase through intercalation and thermal treatment. The 2H crystals were intercalated via a room-temperature sodium naphthalenide solution, producing a previously unreported Na-intercalated 2H WS 2 phase. Thermal heating was required to facilitate the phase transition to the intercalated 2M crystal structure. This phase transition was studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), electron dispersive X-ray spectroscopy (EDS), and Raman spectroscopy, which confirmed the synthesis of the intercalated 2M phase. Upon deintercalation, crystal and powder samples showed superconductivity with a T c of 8.6–8.7 K, similar to previously reported values. The generality of this process was further demonstrated using alkali metal triethyl borohydride to intercalate 2H WS 2 and produced the desired 2M phase. This novel synthetic method has broad implications for discovering metastable phases in other TMD families and layered materials. Furthermore, separation of the intercalation and phase transition also has the potential to allow for large-scale synthesis of this technologically important phase with greater control over each step of the reaction.

36 MATERIALS SCIENCE↗
NASA NTRS2023

Data-constrained Solar Modeling with GX Simulator

To facilitate the study of solarflares and active regions, we have created a modeling framework, the freelydistributed GX Simulator IDL package, that combines 3D magnetic and plasma structures with thermal andnonthermal models of the chromosphere, transition region, and corona. Its object-based modular architecture,which runs on Windows, Mac, and Unix/Linux platforms, offers the ability to either import 3D density andtemperature distribution models, or to assign numerically defined coronal or chromospheric temperatures anddensities, or their distributions, to each individual voxel. GX Simulator can apply parametric heating modelsinvolving average properties of the magneticfield lines crossing a given voxel, as well as compute and investigatethe spatial and spectral properties of radio,(sub)millimeter, EUV, and X-ray emissions calculated from the model,and quantitatively compare them with observations. The package includes a fully automatic model productionpipeline that, based on minimal users input, downloads the required SDO/HMI vector magneticfield data,performs potential or nonlinear force-freefield extrapolations, populates the magneticfield skeleton withparameterized heated plasma coronal models that assume either steady-state or impulsive plasma heating, andgenerates non-LTE density and temperature distribution models of the chromosphere that are constrained byphotospheric measurements. The standardized models produced by this pipeline may be further customizedthrough specialized IDL scripts, or a set of interactive tools provided by the graphical user interface. Here, wedescribe the GX Simulator framework and its applications.

Solar active regions↗
NASA NTRS2002

Vapor transport growth of organic solids in microgravity and unit gravity: some comparisons and results to date

Thin films of an organic nonlinear optical (NLO) material, N, N-dimethyl-p-(2,2-dicyanovinyl) aniline (DCVA), have been grown in space and on the ground by physical vapor transport in an effusive ampoule arrangement. The thin film growth technique developed on the ground is a direct result of information gleaned from experiments in microgravity. This paper covers the results of our experimental investigations for establishing "ideal" terrestrial conditions for deposition of a DCVA film. The active control during the deposition process was exercised by three deposition variables: the material source temperature, the background pressure external to the growth ampoule and the substrate temperature. Successful growth occurred when the difference in temperature between the source material and the copper substrate was 14 degrees C and the background nitrogen pressure was such that the transport was either diffusive or convective. A qualitative diffusion limited boundary was estimated to occur at a pressure of approximately 20 torr. We have probed the DCVA thin films with visible-near infrared reflection absorption spectroscopy, polarized Fourier transform infrared spectrometry, differential interference contrast optical microscopy, and stylus profilometry.

short duration↗
DOE OSTI2024

Analysis of DESI × DES using the Lagrangian effective theory of LSS

In this work we use Lagrangian perturbation theory to analyze the harmonic space galaxy clustering signal of the Bright Galaxy Survey (BGS) and luminous red galaxies (LRGs) targeted by the dark energy spectroscopic instrument (DESI), combined with the galaxy-galaxy lensing signal measured around these galaxies using Dark Energy Survey Year 3 source galaxies. The BGS and LRG galaxies are extremely well characterized by DESI spectroscopy and, as a result, lens galaxy redshift uncertainty and photometric systematics contribute negligibly to the error budget of our “2 × 2-point” analysis. On the modeling side, this work represents the first application of the SPINOSAURUS code, implementing an effective field theory model for galaxy intrinsic alignments, and we additionally introduce a new scheme ( MAIAR ) for marginalizing over the large uncertainties in the redshift evolution of the intrinsic alignment signal. Furthermore, this is the first application of a hybrid effective field theory model for galaxy bias based on the A emulus 𝜈 simulations. Our main result is a measurement of the amplitude of the lensing signal, 𝑆 8 = 𝜎 8 ⁢(Ω 𝑚 /0.3) 0.5 = 0.85⁢0$^{+0.042}_{−0.050}$, consistent with values of this parameter derived from the primary cosmic microwave background. This constraint is artificially improved by a factor of 51% if we assume a more standard, but restrictive parametrization for the redshift evolution and sample dependence of the intrinsic alignment signal, and 63% if we additionally assume the nonlinear alignment model. Furthermore, we show that when fixing the cosmological model to the best-fit values from Planck PR4 there is > 5⁢𝜎 evidence for a deviation of the evolution of the intrinsic alignment signal from the functional form that is usually assumed in cosmic shear and galaxy-galaxy lensing studies.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2021

Calibration of the SHERLOC Deep Ultraviolet Fluorescence–Raman Spectrometer on the Perseverance Rover

We describe the wavelength calibration of the spectrometer for the scanning of habitable environments with Raman and luminescence for organics and chemicals (SHERLOC) instrument onboard NASA’s Perseverance Rover. SHERLOC utilizes deep ultraviolet Raman and fluorescence (DUV R/F) spectroscopy to enable analysis of samples from the Martian surface. SHERLOC employs a 248.6 nm deep ultraviolet laser to generate Raman-scattered photons and native fluorescence emission photons from near-surface material to detect and classify chemical and mineralogical compositions. The collected photons are focused on a charge-coupled device and the data are returned to Earth for analysis. The compact DUV R/F spectrometer has a spectral range from 249.9 nm to 353.6 nm (200 cm1 to 12, 000 cm1) (with a spectral resolution of 0.296 nm (40 cm1)). The compact spectrometer uses a custom design to project a high-resolution Raman spectrum and a low-resolution fluorescence spectrum on a single charge-coupled device. The natural spectral separation enabled by deep ultraviolet excitation enables wavelength separation of the Raman/fluorescence spectra. The SHERLOC spectrometer was designed to optimize the resolution of the Raman spectral region and the wavelength range of the fluorescence region. The resulting illumination on the charge-coupled device is curved, requiring a segmented, nonlinear wavelength calibration in order to understand the mineralogy and chemistry of Martian materials.

Kyle Uckert↗
DOE OSTI2025

Dynamical phase transition in a strongly hybridized phonon-triplon chain

In this article, we study a dimerized spin-1/2 chain, such as CuGeO 3 , hosting triplon excitations coupled to optical phonons under weak terahertz laser driving. Both phonons and triplons weakly lose energy into the surrounding baths, forming a non-equilibrium steady state. In the strong phonon-triplon coupling regime, phonons near the two-triplon continuum hybridize strongly with triplons. Using mean-field Lindblad dynamics, we show that strong hybridization induces sharp first-order phase transitions—either single or simultaneous double—in the emission spectrum, mainly due to nonlinearities in the chain and the instantaneous breaking of spatial inversion symmetry, as captured by the phonon displacement. Using mean-field Floquet analysis of harmonic modes in both sectors, we analytically confirm the existence of these phase transitions. Furthermore, we map the complete steady-state phase diagram by varying key control parameters and provide experimentally relevant parameters for observing these transitions in laser-driven CuGeO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Trivalent Rare Earth Adsorption at Phosphonic Acid Monolayers

The increasing need for rare earth separations requires a detailed understanding of trivalent ion behavior at charged aqueous interfaces. Here, neodymium (Nd) adsorption on Langmuir monolayers of octadecylphosphonic acid (ODPA), a single‐chain phosphonic acid capable of double deprotonation, at the air/water interface, is investigated. Combining sum frequency generation (SFG) spectroscopy with X‐ray fluorescence near total reflection (XFNTR), both the interfacial water ordering and ion density are examined. Under ambient conditions, Nd ions induce enhanced deprotonation of ODPA headgroups, leading to interfacial ion densities as high as 1 Nd per 30 Å 2 . This adsorption behavior arises from a complex interplay between direct electrostatic interactions, ion pairing, and hydration effects, which cannot be fully captured by classical Gouy–Chapman–Stern models. These insights into trivalent ion adsorption mechanisms provide a pathway toward more effective separation processes for rare earth metals.

adsorptions↗
DOE OSTI2025

Current interrupt method for calculating the electrochemical impedance in a solid oxide electrolysis stack

Here, in this work the time domain response of Solid Oxide Electrolysis Cells (SOEC) to a current interruption was transformed into the frequency domain using a carrier function Laplace transform, which is fit to the experimental data using a MATLAB Complex Nonlinear Least Squares (CNLS) solver. The hardware implementation, consisting principally of a high-speed switch and a fast-logging Analog to Digital Converter (ADC), was assembled and tested using a calibration module to assess the accuracy, repeatability, and speed of acquisition of the prototype device as compared against a calibrated commercial impedance spectrometer. Additionally, the current interrupt device and commercial FRA were used to acquire the impedance spectra of a four cell SOEC stack with a large, 300 cm 2 , active cell area.

SOEC↗
DOE OSTI2025

Photoinduced frustration modulation in 𝜅-type quantum spin liquid candidates

Geometric frustration is a key parameter controlling electronic and magnetic properties of quantum spin liquid systems, yet remains challenging to tune. Here, we coherently drive molecular vibrations with midinfrared pulses in two organic quantum spin liquid candidates, the insulating 𝜅−(BEDT−TTF) 2⁢ Cu 2 ⁢(CN) 3 and the metallic 𝜅−(BEDT−TTF) 4 ⁢Hg 2.89 ⁢Br 8 , and probe their electronic response through ultrafast reflectivity measurements. We observe a nonlinear coupling between local molecular vibrations and nonlocal phonons, which is expected to directly modulate the geometric frustration of their triangular lattice. Furthermore, our findings establish a promising route to dynamically control frustration in nonbipartite quantum materials.

Frustrated magnetism↗
DOE OSTI2025

Renormalized classical theory of quantum magnets

Here, we derive a renormalized classical spin (RCS) theory for 𝑆 >1/2 quantum magnets by constraining a generalized classical theory that includes all multipolar fluctuations to a reduced CP 1 phase space of dipolar SU(2) coherent states. When the spin Hamiltonian $\hat{ℋ}$(𝑆) is linear in the spin operators $\hat{𝑺}$ 𝑗 for each lattice site 𝑗, the RCS Hamiltonian $\tilde{ℋ}$ cl coincides with the usual classical model ℋ cl = lim 𝑆→∞⁡ $\hat{ℋ}$(𝑆). In the presence of nonlinear terms, however, the RCS theory is more accurate than ℋ cl . For the many materials modeled by spin Hamiltonians with (nonlinear) single-ion anisotropy terms, the use of the RCS theory is essential to accurately model phase diagrams and to extract the correct Hamiltonian parameters from neutron-scattering data.

magnetic anisotropy↗