Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffractive computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Diffraction analysis of Doppler signal characteristics for a cross-beam laser Doppler velocimeter

Based on scalar diffraction theory, single particle scattering characteristics for a cross-beam laser Doppler velocimeter (LDV) have been computed for different particle sizes under varied instrumentation configurations. The modulating component of the scattered signal has been shown to depend upon particle size, shape, and collecting aperture for a given probe volume fringe spacing. Experimental verifications of some of the predictions are presented, and some of the limitations using an LDV as a particle sizing instrument are discussed.

Robinson, D. M.↗
NASA NTRS1982

A microprocessor-based one dimensional optical data processor for spatial frequency analysis

A high degree of accuracy was obtained in measuring the spatial frequency spectrum of known samples using an optical data processor based on a microprocessor, which reliably collected intensity versus angle data. Stray light control, system alignment, and angle measurement problems were addressed and solved. The capabilities of the instrument were extended by the addition of appropriate optics to allow the use of different wavelengths of laser radiation and by increasing the travel limits of the rotating arm to + or - 160 degrees. The acquisition, storage, and plotting of data by the computer permits the researcher a free hand in data manipulation such as subtracting background scattering from a diffraction pattern. Tests conducted to verify the operation of the processor using a 25 mm diameter pinhole, a 39.37 line pairs per mm series of multiple slits, and a microscope slide coated with 1.091 mm diameter polystyrene latex spheres are described.

Collier, R. L.↗
NASA NTRS1984

Imaging system design for improved information capacity

Shannon's theory of information for communication channels is used to assess the performance of line-scan and sensor-array imaging systems and to optimize the design trade-offs involving sensitivity, spatial response, and sampling intervals. Formulations and computational evaluations account for spatial responses typical of line-scan and sensor-array mechanisms, lens diffraction and transmittance shading, defocus blur, and square and hexagonal sampling lattices.

Fales, C. L.↗
NASA NTRS1997

Glycolonitrile oligomerization: structure of isolated oxazolines, potential heterocycles on the early earth

A study of glycolonitrile polymerization has led to the isolation and characterization of two 2,5-dihydro-4-aminooxazoles, 4 and 5. Previous reports have misassigned these structures as s-triazines or pyrimidines. X-ray diffraction analysis of crystals of 4 and an acetylated oxazole derivative of 5 (6) confirm the proposed structures. Ab initio computations are used to assess the relative thermodynamic stability of three trimer isomers (an s-triazine, an aminohydroxypyrimidine, and an aminooxazoline), and the results indicate that 4 is a novel kinetic product. Mechanistic considerations rationalize kinetic oxazole formation over the more customary triazine or pyrimidine trimers.

Non-NASA Center↗
NASA NTRS1996

Linearization of an annular image by using a diffractive optic

The goal for this project is to develop the algorithms for fracturing the zones defined by the mapping transformation, and to actually produce the binary optic in an appropriate setup. In 1984 a side-viewing panoramic viewing system was patented, consisting of a single piece of glass with spherical surfaces which produces a 360 degree view of the region surrounding the lens which extends about 25 degrees in front of and 20 degrees behind the lens. The system not only produces images of good quality, it is also afocal, i.e., images stay in focus for objects located right next to the lens as well as those located far from the lens. The lens produced a panoramic view in an annular shaped image, and so the lens was called a PAL (panoramic annular lens). When applying traditional measurements to PAL images, it is found advantageous to linearize the annular image. This can easily be done with a computer and such a linearized image can be produced within about 40 seconds on current microcomputers. However, this process requires a frame-grabber and a computer, and is not real-time. Therefore, it was decided to try to perform this linearization optically by using a diffractive optic.

Matthys, Donald R.↗
NASA NTRS1977

High-resolution electron microscope

Employing scanning transmission electron microscope as interferometer, relative phases of diffraction maximums can be determined by analysis of dark field images. Synthetic aperture technique and Fourier-transform computer processing of amplitude and phase information provide high resolution images at approximately one angstrom.

Nathan, R.↗
NASA NTRS1980

Study of stray light suppression for the large space telescope

Analysis of light scattering, using the APART computer program, begins at the image plane and progresses through the optical system to the front end of the telescope tube. The approach identifies all critical surfaces, computes the geometrical configuration factors (GCF) from each area of the system under study to all other areas of the system, and determines incident and reflected angles which are important for baffle surfaces which do not have Lambertian scattering characteristics. The power input into the optical surface from either point source objects or extended objects such as the bright Earth are computed. The surface scattering characteristics and the GCF values are combined so that the power transfer to the image plane is computed. Capabilities for handling light scattering from baffle surfaces, specular reflectance from black surfaces, scattering from mirror surfaces, diffraction, internal scattering from transmissive optics, and internal thermal emission are assessed.

Fannin, B. B.↗
NASA NTRS1994

Low-Flow-Rate Dry-Powder Feeder

Apparatus feeds small, precise flow of dry powder through laser beam of optical analyzer measuring patterns of light created by forward scattering (Fraunhofer diffraction) of laser beam from powder particles. From this optical measurement, statistical distribution of sizes of powder particles computed. Rates of flow optimized for measurement of particle-size distributions. Developed for analyzing particle-size distributions of solid-propellant powders. Also adapted to pharmaceutical industry, in manufacture of metal powder, and in other applications where particle-size distributions of materials used to control rates of chemical reactions and/or physical characteristics of processes.

Ramsey, Keith E.↗
NASA NTRS1994

Scattering Effects of Solar Panels on Space Station Antenna Performance

Characterizing the scattering properties of the solar array panels is important in predicting Space Station antenna performance. A series of far-field, near-field, and radar cross section (RCS) scattering measurements were performed at S-Band and Ku-Band microwave frequencies on Space Station solar array panels. Based on investigation of the measured scattering patterns, the solar array panels exhibit similar scattering properties to that of the same size aluminum or copper panel mockup. As a first order approximation, and for worse case interference simulation, the solar array panels may be modeled using perfect reflecting plates. Numerical results obtained using the Geometrical Theory of Diffraction (GTD) modeling technique are presented for Space Station antenna pattern degradation due to solar panel interference. The computational and experimental techniques presented in this paper are applicable for antennas mounted on other platforms such as ship, aircraft, satellite, and space or land vehicle.

Panneton, Robert J.↗
NASA NTRS2018

Infrared Computer-Generated Holograms: Design and Application for the WFIRST Grism Using Wavelength-Tuning Interferometry

Interferometers using computer-generated holograms (CGHs) have become the industry standard to accurately measure aspheric optics. The CGH is a diffractive optical element that can create a phase or amplitude distribution and can be manufactured with low uncertainty using modern lithographic techniques. However, these CGHs have conventionally been used with visible light and piezo-shifting interferometers. Testing the performance of transmissive optics in the infrared requires infrared CGHs and an infrared interferometer. Such an instrument is used in this investigation, which introduces its phase shift via wavelength-tuning. A procedure on how to design and manufacture infrared CGHs and how these were successfully used to model and measure the Wide-Field Infrared Survey Telescope grism elements is provided. Additionally, the paper provides a parametric model, simulation results, and calculations of the errors and measurements that come about when interferometers introduce a phase variation via wavelength-tuning interferometry to measure precision aspheres.

Communication↗
NASA NTRSDate not supplied

Mineralogical, Elemental and Tomographic Reconnaissance Investigation for CLPS (“METRIC”)

METRIC comprises a suite of two instruments in a Lunar lander that perform X-ray diffraction (XRD) for mineral structure, X-ray fluorescence (XRF) for elemental composition, and X-ray Micro Computed Tomography (XCT) for 3D internal micromorphology. The instruments are accompanied by optical-near IR cameras to provide local geologic context. The Honeybee Robotics PlanetVac pneumatic sampling and transfer system [1],positioned on a lander footpad, will deliver sieved regolith to the X-ray instruments for analysis. The instrument suite is intended for delivery to the lunar surface on a Commercial Lunar Payload Services (CLPS) lander. The METRICXRD/F instrument draws on heritage from the Mars Science Laboratory CheMin instrument [2] and improves upon the design in multiple ways [3]. Like CheMin, Rietveld refinement and full-pattern fitting of METRIC XRD data can identify minerals at a detection limit of ~1 wt.%, quantify their abundances when present at >3 wt.%, and determine mineral composition (e.g., Fo#in olivine) from lattice parameters for minerals present at >5 wt.%[4,5]. An optimized XRF geometry provides for improved detection and quantification of major, minor and trace elements. The METRIC XCT instrument is a miniaturized X-ray Computed Tomography scanner[6]. Lunar regolith is delivered to a 3 mm diameter, 10 mm long graphite tube inside the instrument. The tube is rotated through 360°in 0.9deg.incrementsand a divergent point source X-ray beam is directed through the material. A Charge Coupled Device (CCD)records attenuation images whose brightness and contrast area function of average atomic number and density. Quantitative data, including particle and void sizes, 3D particle shape parameters, modal volumes and pore geometry can be derived from the resulting 3D reconstructions(voxel resolution: 30 μm). Crystal morphologies derived from METRIC XCT data complement the bulk mineralogy determined by the METRIC XRD/F and provide a measure of grain size distribution for the different phases. Taken together, the METRIC instrument suite determines crystal structure, elemental composition and morphology, three principal characteristics of geological materials that are highly useful in determining the origin and subsequent processing of lunar regolith.

Moon↗
NASA NTRSDate not supplied

Mineralogical, Elemental, and Tomographic Reconnaissance Investigation for CLPS (Metric)

Geological solids are characterized by their mineral structure, elemental composition, and morphology. The Mineralogical, Elemental, and Tomographic Reconnaissance Investigation for CLPS (METRIC) is an instrument payload that will quantify all three. METRIC comprises a suite of instruments in a lander to perform X-ray diffraction (XRD) for mineral structure, X-ray fluorescence (XRF) for elemental composition, and X-ray Micro Computed Tomography (XCT) for 3D internal micromorphology. The instruments are accompanied by an Infrared Spectrometer (IRS) provide geologic context. A Honeybee Robotics pneumatic sampling and transfer system [e.g., 1] will be positioned under the lander to deliver sieved regolith to the X-ray instruments for analysis. This payload is envisioned for deployment to the lunar surface on a Commercial Lunar Payload Services (CLPS) lander but could be carried on a lander or rover to any solid surface in the solar system.

E B Rampe↗
NASA NTRS1972

The X-ray system of crystallographic programs for any computer having a PIDGIN FORTRAN compiler

A manual is presented for the use of a library of crystallographic programs. This library, called the X-ray system, is designed to carry out the calculations required to solve the structure of crystals by diffraction techniques. It has been implemented at the University of Maryland on the Univac 1108. It has, however, been developed and run on a variety of machines under various operating systems. It is considered to be an essentially machine independent library of applications programs. The report includes definition of crystallographic computing terms, program descriptions, with some text to show their application to specific crystal problems, detailed card input descriptions, mass storage file structure and some example run streams.

Stewart, J. M.↗
NASA NTRS1995

Effect of Stacking Faults on the X-Ray Diffraction Profiles of Beta-SiC Powders

X-ray diffraction patterns or beta-SiC (3C or the cubic polytype or sic) powders often exhibit an additional peak at d = 0.266 nm, high background intensity around the (111) peak, and relative intensities for peaks which differ from those predicted from the crystal structure. Computer simulations were used to show that all these features are due to stacking faults in the powders and not due to the presence of other polytypes in the powders. Such simulations allow diffraction patterns to be generated for different types, frequencies, and spatial distribution or faults. Comparison of the simulation results to the XRD data indicates that the B-SiC particles consist either of heavily faulted clusters distributed irregularly between regions that have only occasional faults or twins, or the powders consist of two types of particles with different populations of faults: those with a high density of faults and those with only twins or occasional faults. Additional information is necessary to determine which description is correct. However, the simulation results can be used to rule out certain fault configurations.

Pujar, Vijay V.↗
NASA NTRS1974

Variable beamwidth monopulse feed for Tracking and Data Relay Satellite (TDRS)

The Tracking and Data Relay Satellite with a set of circularly-polarized, amplitude-sensing monopulse patterns suitable for acquiring and tracking user spacecraft at Ku-band (15.0 GHz) is discussed. The possibility of increasing the less than 0.4-degree half-power beamwidth of the data beam to almost 1.0 degree during the acquisition phase is predicated on the use of feeds situated in the first bright-ring of the Airy diffraction structure. A complex-vector simulation equivalent to the Kirchhoff-Kottler or Franz formulations is used to compute transmitted and received field information for a dual-reflector (Cassegrain) antenna configuration in a three-dimensional space.

Schmidt, R. F.↗
NASA NTRS1987

Radar cross section of an open-ended circular waveguide Calculation of second-order diffraction terms

The radar cross section of an open-ended, semi-infinite circular waveguide is calculated by the geometrical theory of diffraction and the equivalent-current (EC) method. Both single- and double-diffraction terms are included. It is found that the double-diffraction term is stronger than the single-diffraction term for the horizontal polarization at wide-angle incidence. Its inclusion is necessary in order to check with experimental data and the asymptotic expansion of the exact Wiener-Hopf solution. The EC method is used for the single diffraction. On the other hand the double-diffraction term is obtained by using the EC method for axial incidence and geometrical theory of diffraction for wide-angle incidence. These two solutions are matched with a proper matching function. This technique is computationally more efficient than the matching technique of integration over the equivalent currents.

Lee, C. S.↗
NASA NTRS1991

Residual thermal strains and stresses in nickel aluminide matrix composites

Thermally induced residual strains and stresses developed during postfabrication cooling in Saphikon/NiAl and tungsten/NiAl high-temperature composites are investigated through three-dimensional elastoplastic finite-element analyses. Average axial and transverse strains in the matrix are found to be tensile and compressive, respectively, and similar for both Saphikon and W-fiber-reinforced NiAl composites. It is suggested that the residual matrix stresses and strains are controlled more by the low-matrix yield stress than by the fiber/matrix expansion mismatch. Residual thermal strains in the matrix of these composites are measured by using a neutron-diffraction technique; the measured axial and transverse strains in the matrix are found to be in agreement with the computed values.

Saigal, A.↗
NASA NTRS1993

Self-Amplified Optical Pattern Recognizer

Self-amplified optical pattern recognizers developed for use in recognition of patterns, in optical computing, and in optoelectronic neural networks. In recognizer, photorefractive crystal serves as medium in which one holographically records diffraction-grating filter representing pattern with which recognition sought. Apparatus "self-amplified" because signal amplified within filter to many orders of magnitude greater than in prior optical pattern recognizers. Basic principle of operation applicable to many types of correlation filters, including (but not limited to) Vander Lugt matched filters, joint-transform filters, and phase-only filters.

Liu, Hua-Kuang↗