Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMMONIA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Exsolution of NiCo alloys over Ruddlesden-Popper perovskite for mild electrochemical synthesis of ammonia on protonic ceramic electrochemical cells

Ammonia synthesis from renewable energies on protonic ceramic electrochemical cells (PCECs) shows great potential. The primary challenges in ammonia synthesis on PCECs include sluggish catalytic activity, competition from the hydrogen evolution reaction, and unsatisfactory durability of the cathode, which is the active site of ammonia generation. Here, in this study, we report an elaborate design of the cathode with an intended formula of Pr 4 Ni 1.79 Co 1.2R u 0.01 O 10-δ , where NiCo alloy nanoparticles are exsolved from Ruddlesden-Popper perovskite substrates after the reduction in 5 % H 2 /Ar at 400 °C for 1 h, for electrocatalysis of the nitrogen reduction reaction to ammonia. The host material Pr 4 Ni 1.8 Co 1.2 O 10-δ with embeddable layered structure and stability was deliberately chosen to fix the Ru cation and maximize the catalytic activity of NiCo. Also, density functional theory calculations suggest that Ru doping provides an optimal balance between structural stability and redox activity, facilitating the controlled exsolution of NiCo nanoparticles and enhancing catalytic performance. As a result, the composite electrode with exsolved NiCo alloy and abundant oxygen vacancies on fuel-electrode-supported PCECs achieves a superior electrochemical activity towards ammonia synthesis: a peak ammonia formation rate of 27.84 μg h −1 cm −2 and excellent Faradaic efficiencies of 62.6 % at 350 °C.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Alternative route for electrochemical ammonia synthesis by reduction of nitrate on copper nanosheets

We propose an efficient and clean avenue for ammonia synthesis, via electroreduction of nitrate which could be obtained from industrial wastewater, domestic sewage, sodium nitrate ore, and nitrification of bacteria and electrochemical oxidation of nitrogen, which addresses the water pollution issues and simultaneously upgrades the nitrate to high-value ammonia. At a low overpotential of -0.15 V versus RHE, Cu nanosheets achieved an ammonia formation rate of 390.1 μg mg -1 Cu h -1 and a Faradaic efficiency of 99.7%, attributed to suppression of the HER activity and apparent improvement of the rate of rate-determining step on Cu (111). Such an ammonia formation rate is more than two orders of magnitude higher than electrochemical nitrogen reduction reaction to ammonia. This work not only develops a powerful strategy to the rational design of robust and efficient catalysts by crystal facet engineering, but also provides an alternative route for electrochemical ammonia synthesis by reduction of nitrate.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ammonia-based chemisorption heat pumps for cold-climate heating applications: A comprehensive review

This paper reviews the state of the art of chemisorption heat pumps that use ammonia as the refrigerant for cold-climate heating applications. In such a system, ammonia vapor is adsorbed by the solid salt through reversible chemisorption reactions, and the thermal effect of the reaction and ammonia phase change is used to extract heat from a cold environment and supply heat to a warm environment. With the high latent heat and low boiling point of ammonia as a low-temperature refrigerant and the high sorption capacity of ammonia-based chemisorption reactions, chemisorption heat pumps have the potential to produce high-efficiency heating, particularly for cold climates. This review first briefly introduces the basics of ammonia-based chemisorption heat pump systems. Then, the latest development of sorbent materials, including ammoniate salts and heat-conductive porous matrix materials, are summarized with the focus on low-temperature heating conditions. The design of system components, as well as cycle configurations, in the literature are summarized. This review concludes with highlights of recent developments on these topics and suggestions of areas for further research.

42 ENGINEERING↗
DOE OSTI2015

Crystal structure and characterization of a novel L-serine ammonia-lyase from Rhizomucor miehei

L-serine ammonia-lyase, as a member of the β-family of pyridoxal-5′-phosphate (PLP) dependent enzymes, catalyzes the conversion of L-serine (L-threonine) to pyruvate (α-ketobutyrate) and ammonia. The crystal structure of L-serine ammonia-lyase from Rhizomucor miehei (RmSDH) was solved at 1.76 Å resolution by X-ray diffraction method. The overall structure of RmSDH had the characteristic β-family PLP dependent enzyme fold. It consisted of two distinct domains, both of which show the typical open twisted α/β structure. A PLP cofactor was located in the crevice between the two domains, which was attached to Lys52 by a Schiff-base linkage. Unique residue substitutions (Gly78, Pro79, Ser146, Ser147 and Thr312) were discovered at the catalytic site of RmSDH by comparison of structures of RmSDH and other reported eukaryotic L-serine ammonia-lyases. Optimal pH and temperature of the purified RmSDH were 7.5 and 40 °C, respectively. It was stable in the pH range of 7.0–9.0 and at temperatures below 40 °C. This is the first crystal structure of a fungal L-serine ammonia-lyase. It will be useful to study the catalytic mechanism of β-elimination enzymes and will provide a basis for further enzyme engineering. - Highlights: • The crystal structure of a fungal L-serine ammonia-lyase (RmSDH) was solved. • Five unique residue substitutions are found at the catalytic site of RmSDH. • RmSDH was expressed in Pichia. pastoris and biochemically characterized. • RmSDH has potential application in splitting D/L-serine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Gas sensor based on three dimensional Bi2S3 nanowires network for ammonia detection at room temperature

Highlights: • Three dimensional Bi{sub 2}S{sub 3} nanowires networks. • High response to NH{sub 3} gas. • Good selectivity. • Wide linear range. • Work at room temperature. - Abstract: A film containing three dimensional Bi{sub 2}S{sub 3} nanowires network was obtained using Bi(NO{sub 3}){sub 3} and thioacetamide as starting materials through three steps, namely the chemical synthesis of Bi{sub 2}S{sub 3}, preparation of its sol under ultrasonic condition and crystal self-assembly at 25 °C. The nanowires had diameters of 20–100 nm. The formation mechanism of the 3D nanowires network is the anisotropic growth of Bi{sub 2}S{sub 3}. The sensor based on 3D Bi{sub 2}S{sub 3} nanowires network with an excellent response to ammonia at 30 °C. The response mechanism of the sensor for ammonia is a weak coordination adsorption of ammonia molecule on the Bi{sub 2}S{sub 3} nanowires and the electron is partially transferred from ammonia molecule to bismuth (III) ion. The maximum response of the sensor to ammonia was up to 82.3 and had a good linear range from 30 to 350 ppm concentration, indicating its potential applications in the determination and leak alarm of ammonia.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

High-throughput screening to predict highly active dual-atom catalysts for electrocatalytic reduction of nitrate to ammonia

Ammonia is an essential chemical owing to its importance in fertilizer production and other industrial applications. Electrocatalytic nitrate reduction to ammonia (NO 3 RR) holds great promise for low-temperature ammonia production while simultaneously addressing nitrate-based environmental concerns. To provide the mechanistic understanding needed to design an effective electrocatalyst, we systematically investigated the catalytic performance of metal-based dual-atom catalysts (DACs) anchored on two-dimensional (2D) expanded phthalocyanine (Pc) for NO 3 RR. We found that NO 3 RR can efficiently produce ammonia on Cr 2 -Pc, V 2 -Pc, Ti 2 -Pc, and Mn 2 -Pc surfaces with low limiting potentials of – 0.02, – 0.25, – 0.34, and – 0.41 V RHE , respectively. Moreover, using the free energy difference of *NO 3 - and *H as a descriptor, we found that the hydrogen evolution reaction is significantly suppressed on the DAC surface due to an ensemble effect in which the two metal atoms cooperate to selectively form ammonia. We performed high-throughput screening to develop an efficient metal-based DAC for NO 3 - reduction, followed by a mechanistic study to elucidate the NO3RR pathway on the DAC. Finally, this work provides design information for advancing sustainable ammonia synthesis under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Ammonia gas sensors: A comprehensive review

We report that in recent years, sensitive, selective and accurate sensing techniques for ammonia gas detection have been highly demanded since ammonia is both a commonly utilized gas in various industrial sectors and a highly toxic and corrosive agent that can threat human health and environment. This review article discusses the widely used gas sensing techniques in ammonia detection. The fundamental working principles of the ammonia detection techniques relying on electronics, electrochemistry, tunable diode laser spectroscopy, surface acoustic wave, and field effect transistors are briefly described first, in conjunction with various sensing materials. Furthermore, recent progress in the development of advanced ammonia gas sensors was comprehensively reviewed and summarized. Finally, the outlook for future development of high-performance ammonia sensors was presented.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

Biochar to reduce ammonia emissions in gaseous and liquid phase during composting of poultry manure with wheat straw

Highlights: • Biochar can function as an amendment for low C/N and low porosity raw materials. • Biochar reduced the gaseous emissions of ammonia during poultry manure composting. • Significant ammonia emissions [NH{sub 4}{sup +}] in the condensate were registered. • Biochar has a potential impact on N retention during composting of high N materials. •easuring [NH{sub 4}{sup +}] in condensate allows closing up the N balance during composting. - Abstract: Composting of poultry manure which is high in N and dense in structure can cause several problems including significant N losses in the form of NH{sub 3} through volatilization. Biochar due to its recalcitrance and sorption properties can be used in composting as a bulking agent and/or amendment. The addition of a bulking agent to high moisture raw materials can assure optimal moisture content and enough air-filled porosity but not necessarily the C/N ratio. Therefore, amendment of low C/N composting mixtures with biochar at low rates can have a positive effect on composting dynamics. This work aimed at evaluating the effect of selected doses of wood derived biochar amendment (0%, 5% and 10%, wet weight) to poultry manure (P) mixed with wheat straw (S) (in the ratio of 1:0.4 on wet weight) on the total ammonia emissions (including gaseous emissions of ammonia and liquid emissions of ammonium in the collected condensate and leachate) during composting. The process was performed in 165 L laboratory scale composting reactors for 42 days. The addition of 5% and 10% of biochar reduced gaseous ammonia emission by 30% and 44%, respectively. According to the obtained results, the measure of emission through the condensate would be necessary to assess the impact of the total ammonia emission during the composting process.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2017

An environmental friendly animal waste disposal process with ammonia recovery and energy production: Experimental study and economic analysis

Highlights: • An environmental friendly animal manure waste treatment scheme was proposed. • Ammonia was removed and recovered from manure waste in the form of struvite. • Horse manure waste gasification was successfully conducted in a 10 kW gasifier. • Gasifier produces comparable or higher heating value of syngas as other feedstocks. • The proposed scheme is financially superior to pure gasification and incineration. - Abstract: Animal manure waste is considered as an environmental challenge especially in farming areas mainly because of gaseous emission and water pollution. Among all the pollutants emitted from manure waste, ammonia is of greatest concern as it could contribute to formation of aerosols in the air and could hardly be controlled by traditional disposal methods like landfill or composting. On the other hand, manure waste is also a renewable source for energy production. In this work, an environmental friendly animal waste disposal process with combined ammonia recovery and energy production was proposed and investigated both experimentally and economically. Lab-scale feasibility study results showed that 70% of ammonia in the manure waste could be converted to struvite as fertilizer, while solid manure waste was successfully gasified in a 10 kW downdraft fixed-bed gasifier producing syngas with the higher heating value of 4.9 MJ/(N m{sup 3}). Based on experimental results, economic study for the system was carried out using a cost-benefit analysis to investigate the financial feasibility based on a Singapore case study. In addition, for comparison, schemes of gasification without ammonia removal and incineration were also studied for manure waste disposal. The results showed that the proposed gasification-based manure waste treatment process integrated with ammonia recovery was most financially viable.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Rapid, efficient reduction of iron oxide with ammonia

Reducing iron oxide to iron metal with fossil fuels produces circa 4% of annual anthropogenic CO 2 , ca. 2 Gt/a, as direct chemical emissions from the process. Using ammonia instead of coke—releasing only water and nitrogen as byproducts—could be a widely deployable method of decarbonizing industrial ironmaking, because ammonia carries hydrogen and can be transported easily worldwide. However, initial reports suggest that the reaction of ammonia with iron oxide is slow and inefficient, completed only in hours and using only a few percent of the ammonia supplied. Drawing on thermodynamic and kinetic analysis of the reaction, we explored high-temperature, high-flow reaction conditions designed to increase the reaction rate and the ammonia utilization. We report the reduction of iron oxide in 1 min while using 64% of the ammonia supplied. We show that these insights translate to the gram scale and the reduction of pelletized ore, a common form used industrially.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Unraveling In-Situ Formation of Surface Nickel Nitride Structures in Plasma-Assisted Catalytic Ammonia Synthesis

We report the in situ formation of Ni nitride for plasma-assisted ammonia synthesis. Both the surface nitrogen concentration and the ammonia formation rate exhibit dependence on the N 2 :H 2 feed ratio. The maximum surface nitrogen concentration occurs at a N 2 :H 2 ratio of 4:1, and the maximum catalytic activity occurs at 2:1. In contrast, the formation of gas phase radicals is less sensitive to feed composition, indicating that Ni nitride is more kinetically relevant to ammonia production than gas-phase radicals. The plasma-induced formation of Ni nitride is therefore proposed to be a critical contributor to the synergistic effects in plasma-assisted catalytic ammonia synthesis. Additionally, Ni nitride alters the surface reaction mechanism of plasma-assisted ammonia synthesis, with the rate-determining-step (RDS) shifting to surface-bound NH 3 formation rather than N 2 activation at temperatures below 373 K. These findings provide mechanistic insight that opens opportunities for optimizing the performance of plasma-assisted catalytic ammonia synthesis

Ammonia↗
DOE OSTI2020

Mechanocatalytic Ammonia Synthesis over TiN in Transient Microenvironments

Environmentally friendly and energy-efficient ways to produce ammonia are essential to meet global food demands. In this study, a new approach for ammonia production at nominally ambient conditions is introduced. As proof of concept, ammonia is synthesized mechanocatalytically by ball milling titanium in a continuous gas flow. The ammonia synthesis reaction is proposed to follow a transient Mars–van Krevelen mechanism under mechanically activated conditions, where molecular nitrogen incorporation into the titanium lattice and titanium nitride hydrogenation occur in thermodynamically distinct environments. X-ray powder diffraction and X-ray absorption spectroscopy confirm the formation of titanium nitride from titanium and N2. The reactivity of nitrided titanium supports that lattice nitrogen plays a role in ammonia formation. The in situ formed titanium nitride is catalytically active, and the nitride regeneration reaction is determined to be the rate-limiting step. A preliminary technoeconomic analysis shows that this approach could be feasible for distributed ammonia production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

First-Principles Molecular Dynamics Simulations of Ammonia Adsorption onto MFI Zeolite Nanosheets

MFI zeolite nanosheet membranes are promising candidates for ammonia separation from nitrogen and hydrogen gases, yet questions remain on the origin of their high selectivity. Silanols, Si–OH, are present in high concentration at the surface of zeolite nanosheets, and force-field-based simulations indicate that surface adsorption at the silanols contributes to selectivity. Acidic silanol groups can chemically react with ammonia via transfer of a proton to form ammonium ions, which may further contribute to the ability of zeolite nanosheet membranes to separate ammonia from other gases. In this work, we used first-principles molecular dynamics techniques to simulate ammonia’s behavior within stacked MFI zeolite nanosheets. We found that at 523 K and a loading corresponding to 35 bar, conditions desired for the ammonia separation, about 30% of ammonia reacts with surface silanols. Our work explored H-bonding and proton transfer within this system.

ammonia↗
DOE OSTI2018

Rates of Ammonia Absorption and Release in Calcium Chloride

After synthesis, ammonia can be selectively absorbed by calcium chloride; nitrogen and hydrogen are not absorbed. The kinetics of release seem to be diffusion controlled. The kinetics of absorption are consistent with a first-order reaction after an initial period of a higher-order reaction, which may indicate a nucleation event. At 225 °C, both absorption and release show half-lives of around 10 min if the ammonia partial pressure is swung from 2 to 1 bar, which allows design of an absorber for the periodic separation of ammonia. Furthermore, when this absorber replaces the ammonia condenser in a conventional ammonia synthesis, the ammonia production at low pressure can have the same rate as the conventional process operating at higher pressure.

09 BIOMASS FUELS↗
DOE OSTI2025

Electrocatalytic Ammonia Oxidation by Pyridyl-Substituted Ferrocenes

Ammonia (NH 3 ) is a promising carbon-free fuel when prepared from sustainable resources. First-row transition metal electrocatalysts for ammonia oxidation are an enabling technology for sustainable energy production. We describe electrocatalytic ammonia oxidation using robust molecular complexes based on Earth-abundant iron. Electrochemical studies of ferrocenes with covalently attached pyridine arms reveal facile ammonia oxidation in DMSO (2.4 M NH 3 ) with modest overpotentials (η = 770–820 mV) and turnover frequencies (125–560 h –1 ). Experimental and computational studies indicate that the pendant pyridyl base serves as an H-bond acceptor with an N–H bond of ammonia that transfers a proton to the pyridine following oxidation by the attached ferrocenium moiety in a proton-coupled electron transfer (PCET) step. This generates an amidyl (•NH 2 ) radical stabilized via H-bonding to a pendant pyridinium moiety that rapidly dimerizes to hydrazine (H 2 N–NH 2 ), which is easily oxidized to nitrogen (N 2 ) at the glassy carbon working electrode. This report identifies a general strategy to oxidize ammonia via H-bonding to a base (B:), thereby activating [B···H-NH 2 ] toward PCET by a proximal oxidant to form [BH···NH 2 ] +/• radical cations, which are susceptible to dimerization to form easily oxidized hydrazine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Adsorption of ammonia at GaN(0001) surface in the mixed ammonia/hydrogen ambient - a summary of ab initio data

Adsorption of ammonia at NH{sub 3}/NH{sub 2}/H-covered GaN(0001) surface was analyzed using results of ab initio calculations. The whole configuration space of partially NH{sub 3}/NH{sub 2}/H-covered GaN(0001) surface was divided into zones of differently pinned Fermi level: at the Ga broken bond state for dominantly bare surface (region I), at the valence band maximum (VBM) for NH{sub 2} and H-covered surface (region II), and at the conduction band minimum (CBM) for NH{sub 3}-covered surface (region III). The electron counting rule (ECR) extension was formulated for the case of adsorbed molecules. The extensive ab intio calculations show the validity of the ECR in case of all mixed H-NH{sub 2}-NH{sub 3} coverages for the determination of the borders between the three regions. The adsorption was analyzed using the recently identified dependence of the adsorption energy on the charge transfer at the surface. For region I ammonia adsorbs dissociatively, disintegrating into a H adatom and a HN{sub 2} radical for a large fraction of vacant sites, while for region II adsorption of ammonia is molecular. The dissociative adsorption energy strongly depends on the Fermi level at the surface (pinned) and in the bulk (unpinned) while the molecular adsorption energy is determined by bonding to surface only, in accordance to the recently published theory. Adsorption of Ammonia in region III (Fermi level pinned at CBM) leads to an unstable configuration both molecular and dissociative, which is explained by the fact that broken Ga-bonds are doubly occupied by electrons. The adsorbing ammonia brings 8 electrons to the surface, necessitating the transfer of these two electrons from the Ga broken bond state to the Fermi level. This is an energetically costly process. Adsorption of ammonia at H-covered site leads to the creation of a NH{sub 2} radical at the surface and escape of H{sub 2} molecule. The process energy is close to 0.12 eV, thus not large, but the direct inverse process is not possible due to the escape of the hydrogen molecule.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In-Situ Species Concentration Measurements In Ammonia-Mix Flames Using Ftir Spectroscopy

Hydrogen and ammonia represent two carbon-free fuel sources that could be used in place of current fossil energy sources in combustion systems. To develop optimized ammonia combustion systems, validated modeling tools are needed. In the open literature, it has been shown that the complex chemistry associated with fuel-bound nitrogen contained in ammonia differs greatly from natural gas or hydrogen combustion. As a result, several new chemical kinetic mechanisms have been developed. Many of these mechanisms have been validated experimentally, however this has primarily focused on bulk parameters such as laminar flame speed and ignition delay time. Critically, high quality measurements of species concentrations are needed under controlled conditions which are easily represented by simple models. In this paper, direct, in-situ measurements of species concentrations and gas temperature are performed in a laminar flat-flame burner. This arrangement enables comparison with 1D model predictions, better isolating chemical kinetics from the fluid dynamics. Quantitative species concentrations are determined by absorption spectroscopy using an FTIR spectrometer. Fuel compositions representative of cracked ammonia (NH 3 /H 2 ) and ammonia-natural gas (NH 3 /CH 4 ) are considered for rich and lean equivalence ratios. A major focus of the paper is on the selection of spectral features for nitric oxide and ammonia and correcting for large amounts of baseline H 2 O absorption.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Low temperature, ambient pressure electrochemical ammonia synthesis in alkaline media — Mechanistic studies and catalyst design. Final Report

Ammonia synthesis via the Haber-Bosch process is a pillar of modern agriculture, which converts the abundant but inert dinitrogen in the atmosphere to nitrogen-based fertilizers. Despite more than a century of optimization, the Haber-Bosch process remains energy intensive and reliant on fossil fuels and produces large amounts of CO 2 . Distributed and modular ammonia synthesis via the electrochemical nitrogen reduction reaction (ENRR) at or close to ambient conditions, powered by renewable electricity is an attractive alternative because it allows as needed production of ammonia, and in turn fertilizers. However, selective ENRR catalysts remain lacking. In this project, we systematically investigated two categories of catalytic materials, i.e., precious metals and transition metal nitrides, in the ENRR. Precious metals exhibit low activity and selectivity in the ENRR, which is in agreement with recent computational studies. Transition metal nitrides, especially VN, has been demonstrated as active and selective ENRR catalysts. We developed the first quantitative method to determine the amount of ammonia produced in the ENRR on N-containing containing catalysts in the membrane electrode assembly configuration. An initial ammonia production rate of 6.6 × 10 -10 mol s -1 mg -1 and a Faradaic efficiency of 6.0% at -0.1 V were reached on VN. After the initial deactivation, VN was shown to be stable in the ENRR for 116 hours with a steady state ammonia production rate of 1.1 × 10 -10 mol s -1 cm -2 . A vanadium oxynitride species was identified as the active phase in the ENRR via a combination of operando and ex situ characterization techniques. In addition, we established that the ENRR proceeded on transition metal nitrides via the Mars van Krevelen mechanism and determined the initial and steady state active site densities by developing a quantitative isotopic exchange method.

42 ENGINEERING↗