Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter Identifiability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Proposals for bottom quark/squark renormalization in the complex MSSM

We present a consistent renormalization of the top- and bottom-quark/squark sector of the minimal supersymmetric standard model with complex parameters. Various renormalization schemes are defined, analyzed analytically, and tested numerically in the decays t-tilde{sub 2{yields}}b-tilde{sub i}H{sup +}/W{sup +} (i=1, 2). No scheme is found that produces numerically acceptable results over all the parameter space, where problems occur in most cases already for real parameters. Two schemes are identified that show the most robust behavior. A numerical analysis of the four partial stop decay widths is performed in our 'preferred' scheme, 'm{sub b}, A{sub b} DR'. The full one-loop corrections to the corresponding partial decay widths are evaluated, including hard QED and QCD radiation. We find mostly modest corrections at the one-loop level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the differential cross-section of highly boosted top quarks as a function of their transverse momentum in s = 8 TeV proton-proton collisions using the ATLAS detector

The differential cross-section for pair production of top quarks with high transverse momentum is measured in 20.3 fb -1 of proton-proton collisions at a center-of-mass energy of 8 TeV. The measurement is performed for t$\bar{t}$t events in the lepton + jets channel. The cross-section is reported as a function of the hadronically decaying top quark transverse momentum for values above 300 GeV. The hadronically decaying top quark is reconstructed as an anti- k t jet with radius parameter R = 1.0 and identified with jet substructure techniques. The observed yield is corrected for detector effects to obtain a cross-section at particle level in a fiducial region close to the event selection. A parton-level cross-section extrapolated to the full phase space is also reported for top quarks with transverse momentum above 300 GeV. The predictions of a majority of next-to-leading-order and leading-order matrix-element Monte Carlo generators are found to agree with the measured cross-sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Global Sensitivity Analysis of Bulk Properties of an Atomic Nucleus

We perform a global sensitivity analysis of the binding energy and the charge radius of the nucleus 16 O to identify the most influential low-energy constants in the next-to-next-to-leading order chiral Hamiltonian with two- and three-nucleon forces. For this purpose, we develop a subspace-projected coupled-cluster method using eigenvector continuation [Frame D. et al., Phys. Rev. Lett. 121, 032501 (2018)]. With this method, we compute the binding energy and charge radius of 16 O at more than 106 different values of the 16 low-energy constants in one hour on a standard laptop computer. For relatively small subspace projections, the root-mean-square error is about 1% compared to full-space coupled-cluster results. We find that 58(1)% of the variance in energy can be apportioned to a single contact term in the 3 S 1 wave, whereas the radius depends sensitively on several low-energy constants and their higher-order correlations. The results identify the most important parameters for describing nuclear saturation and help prioritize efforts for uncertainty reduction of theoretical predictions. The achieved acceleration opens up an array of computational statistics analyses of the underlying description of the strong nuclear interaction in nuclei across the Segrè chart.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Understanding the Origin of Tabula Rasa Process-Induced Defects in CZ n-type c-Si

High-temperature annealing, known as Tabula Rasa (TR) has been the subject of recent studies as a method to make n-type CZ silicon material resistant to temperature-induced and process-induced lifetime degradation during solar cell fabrication. In this work, we study the defects responsible for the lifetime changes after TR treatment. We use temperature and injection dependent lifetime spectroscopy (T-IDLS) and the recently introduce defect parameter contour mapping to identify the Energy Level (E t ) and capture cross-section ratio (k) of the most likely process-induced defect. We also present a closer look at changes in surface recombination velocity before and after TR annealing.

bulk lifetime↗

Labeling sequential data from noisy annotations

Crowdsourcing algorithms often work under the assumption that the data samples are independent. Recent work has shown that data dependence, such as temporal correlations in sequential data, can be leveraged to improve the label quality. Existing methods that exploit this special structure rely on third-order statistics of the annotator outputs to ensure the identifiability of key latent parameters, which are costly to acquire. This work proposes an approach for integrating crowdsourced annotations under the Dawid-Skene/Hidden Markov Model (DS-HMM) for sequential data based on second-order statistics, which naturally enjoys a lower sample complexity. An effective algorithm is proposed to tackle the challenging optimization problem associated with the proposed estimator. Numerical experiments showcase the effectiveness of the data labeling paradigm.

Marrinan, Timothy P.↗

Autonomous Closed-Loop Experimental Characterization and Dynamic Model Validation of a Scaled Underwater Kite

This paper presents the closed-loop experimental framework and dynamic model validation for a 1/12-scale underwater kite design. The pool-based tow testing framework described herein, which involves a fully actuated, closed-loop controlled kite and flexible tether, significantly expands upon the capabilities of any previously developed open-source framework for experimental underwater kite characterization. Specifically, the framework has allowed for the validation of three closed-loop flight control strategies, along with a critical comparison between dynamic model predictions and experimental results. In this paper, we provide a detailed presentation of the experimental tow system and kite setup, describe the control algorithms implemented and tested, and quantify the level of agreement between our multi-degree-of-freedom kite dynamic model and experimental data. Finally, we also present a sensitivity analysis that helps to identify the most influential parameters to kite performance and further explain the remaining mismatches between the model and data.

42 ENGINEERING↗

Development of an Optimal Variable-Pitch Controller for Floating Axial-Flow Marine Hydrokinetic Turbines

This article discusses the development of an optimal variable-pitch controller for floating, axial-flow marine turbines. Recently, OpenFAST, an open-source wind turbine modeling tool, has been extended to model marine turbines. A controller is necessary to simulate marine turbines for different load cases using OpenFAST, which greatly impacts the performance of the energy system. Previous studies have designed controllers using a linearized model of the marine turbine, which can be time-consuming and require the expertise of a control engineer. In this study, we use an automated approach that uses generic models of the marine turbine to identify the controller gains, which can expedite the process of designing a controller. Using an optimizer to identify the control system parameters can additionally improve the controller's performance. The optimal controller tuned using such an approach results in a 20% reduction in the tower-base damage equivalent loading and better tracking of the rated generator speed and power.

axial flow↗

Sci-Sat AM: Radiation Dosimetry and Practical Therapy Solutions - 11: Commissioning of a system for the measurement of electron stopping powers

Purpose: To develop the techniques required to experimentally determine electron stopping powers for application in primary standards and dosimetry protocols. Method and Materials: A large-volume HPGe detector system (>80% efficiency) was commissioned for the measurement of high energy (5–35 MeV) electron beams. As a proof of principle the system was used with a Y-90/Sr-90 radioactive source. Thin plates of absorbing material (< 0.1 gcm-2) were then placed between the source and detector and the emerging electron spectrum was acquired. The full experimental geometry was modelled using the EGSnrc package to validate the detector design, optimize the experimental setup and compare measured and calculated spectra. Results: The biggest challenge using a beta source was to identify a robust spectral parameter to determine for each measurement. An end-point-fitting routine was used to determine the maximum energy, Emax, of the beta spectrum for each absorber thickness t. The parameter dEmax/dt is related to the electron stopping power and the same routine was applied to both measured and simulated spectra. Although the standard uncertainty in dEmax/dt was of the order of 5 %, by taking the ratio of measured and Monte Carlo values for dEmax/dt the uncertainty of the fitting routine was eliminated and the uncertainty was reduced to less than 2 %. The agreement between measurement and simulation was within this uncertainty estimate. Conclusion: The investigation confirmed the experimental approach and demonstrated that EGSnrc could accurately determine correction factors that will be required for the final measurement setup in a linac beam.

61 RADIATION PROTECTION AND DOSIMETRY↗

Establishment of specific features of electron localization at U{sup -} centers in semiconductors from thermally stimulated currents

The specific features of thermally stimulated currents in semiconductors containing U{sup -} centers are treated theoretically in comparison with the corresponding features for semiconductors containing defects with a positive correlation energy or single-level centers. It is shown that the analysis of the curves of thermally stimulated currents normalized to the maximum current in respect to the shape and to the presence or absence of a shift of the temperature maximum of the curve in relation to the initial occupancy provides an extra necessary criterion for identifying defects with different parameters of binding of electrons. The results can be used in analyzing experimental data on thermally stimulated currents that exhibit features inexplicable in the context of the often used model of single-level centers.

36 MATERIALS SCIENCE↗

Higgs-portal dark matter in Brane-world cosmology

Abstract The Higgs-portal scalar dark matter (DM) model is a simple extension of the Standard Model (SM) to incorporate a DM particle to the SM, where a $$Z_2$$ Z 2 -odd real scalar field is introduced as a DM candidate. We consider this DM model in the context of 5-dimensional brane-world cosmology, where our 3-dimensional space is realized as a hyper-surface embedded in 4-dimensional space. In the setup, all the SM and DM fields reside on the hyper-surface while graviton lives in the bulk. We consider two well-known brane-world cosmologies, namely, the Randall–Sundrum (RS) and the Gauss–Bonnet (GB) brane-world cosmologies, in which the standard Big Bang cosmology is reproduced at low temperatures below the so-called “transition temperature” while at high temperatures the expansion law of the universe is significantly modified. Such a non-standard expansion law directly impacts the prediction for the relic density of the Higgs-portal DM. We investigate the brane-world cosmological effects and identify the allowed model parameter region by combining the constraints from the observed DM relic density, and the direct and indirect DM detection experiments. It is well-known that only DM masses in the vicinity of half the Higgs boson mass are allowed in the Higgs-portal scalar DM model. We find that the allowed parameter region becomes more severely constrained and even disappears in the RS cosmology, while the GB cosmological effect significantly enlarges the allowed region. Upon discovering Higgs-portal DM, we can determine transition temperature in the GB brane-world cosmology.

Liu, Taoli↗

Machine Learning-enabled Scalable Performance Prediction of Scientific Codes

Hardware architectures become increasingly complex as the compute capabilities grow to exascale. Here, we present the Analytical Memory Model with Pipelines (AMMP) of the Performance Prediction Toolkit (PPT). PPT-AMMP takes high-level source code and hardware architecture parameters as input and predicts runtime of that code on the target hardware platform, which is defined in the input parameters. PPT-AMMP transforms the code to an (architecture-independent) intermediate representation, then (i) analyzes the basic block structure of the code, (ii) processes architecture-independent virtual memory access patterns that it uses to build memory reuse distance distribution models for each basic block, and (iii) runs detailed basic-block level simulations to determine hardware pipeline usage. PPT-AMMP uses machine learning and regression techniques to build the prediction models based on small instances of the input code, then integrates into a higher-order discrete-event simulation model of PPT running on Simian PDES engine. We validate PPT-AMMP on four standard computational physics benchmarks and present a use case of hardware parameter sensitivity analysis to identify bottleneck hardware resources on different code inputs. We further extend PPT-AMMP to predict the performance of a scientific application code, namely, the radiation transport mini-app SNAP. To this end, we analyze multi-variate regression models that accurately predict the reuse profiles and the basic block counts. We validate predicted SNAP runtimes against actual measured times.

97 MATHEMATICS AND COMPUTING↗

Uncertainty in terahertz time-domain spectroscopy measurement

Measurements of optical constants at terahertz--or T-ray--frequencies have been performed extensively using terahertz time-domain spectroscopy (THz-TDS). Spectrometers, together with physical models explaining the interaction between a sample and T-ray radiation, are progressively being developed. Nevertheless, measurement errors in the optical constants, so far, have not been systematically analyzed. This situation calls for a comprehensive analysis of measurement uncertainty in THz-TDS systems. The sources of error existing in a terahertz spectrometer and throughout the parameter estimation process are identified. The analysis herein quantifies the impact of each source on the output optical constants. The resulting analytical model is evaluated against experimental THz-TDS data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

CRADA NFE-08-01456 Evaluation of Alumina-Forming Austenitic Stainless Steel Alloys in Industrial Gas Turbines

Oak Ridge National Laboratory (ORNL) and Solar Turbines Incorporated (Solar) participated in an in-kind cost share cooperative research and development agreement (CRADA) effort under the auspices of the Energy Efficiency and Renewable Energy (EERE) Technology Maturation Program to explore the feasibility for use of developmental ORNL alumina-forming austenitic (AFA) stainless steels as a material of construction for industrial gas turbine recuperator components. ORNL manufactured lab scale foil of three different AFA alloy compositions and delivered them to Solar for creep properties evaluation. One AFA composition was selected for a commercial trial foil batch. Both lab scale and the commercial trial scale foils were evaluated for oxidation and creep behavior. The AFA foil exhibited a promising combination of properties and is of interest for future scale up activities for turbine recuperators. Some issues were identified in the processing parameters used for the first trial commercial batch. This understanding will be used to guide process optimization of future AFA foil material production.

Brady, Michael P↗

Scientific Opportunities for Monitoring at Environmental Remediation Sites (SOMERS): Integrated Systems-Based Approaches to Monitoring

Through an inter-disciplinary effort, DOE is addressing a need to advance monitoring approaches from sole reliance on cost- and labor-intensive point-source monitoring to integrated systems-based approaches such as flux-based approaches and the use of early indicator parameters. Key objectives include identifying current scientific, technical and implementation opportunities and challenges, prioritizing science and technology strategies to meet current needs within the DOE complex for the most challenging environments, and developing an integrated and risk-informed monitoring framework.

54 ENVIRONMENTAL SCIENCES↗

Applying Alpha-Channeling to Mirror Machines

The α-channeling effect entails the use of radio-frequency waves to expel and cool high-energetic α particles born in a fusion reactor; the device reactivity can then be increased even further by redirecting the extracted energy to fuel ions. Originally proposed for tokamaks, this technique has also been shown to benefit open-ended fusion devices. Here, the fundamental theory and practical aspects of α channeling in mirror machines are reviewed, including the influence of magnetic field inhomogeneity and the effect of a finite wave region on the α-channeling mechanism. For practical implementation of the α-channeling effect in mirror geometry, suitable contained weakly-damped modes are identified. In addition, the parameter space of candidate waves for implementing the α-channeling effect can be significantly extended through the introduction of a suitable minority ion species that has the catalytic effect of moderating the transfer of power from the α-channeling wave to the fuel ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Yearly report for the period Jan. 2018 – Feb. 2019 IC Project: w17_faultprediction “Critical Stress in Earth”

The consequence of earthquake is usually catastrophic. Currently, we cannot determine when a fault is approaching failure due to either anthropogenic activities or tectonic movement. In an anthropogenically perturbed setting, the rate of physical changes on faults far exceeds most natural processes with currently unpredictable and unmeasurable results. In a tectonic setting we generally do not know where a fault is in the earthquake cycle beyond noting how long has passed since the last rupture, which is itself sometimes unknown. The Laboratory has therefore funded a multi million multi-year LDRD-DR program that comprises experiments, numerical modeling, and machine learning in order to develop and test a highly novel approach to probe the earthquake cycle and in particular, to detect and locate stressed faults that are approaching failure. For this program, modeling of a series of sheared granular layers undergoing stick-slip behavior using the EES-17’s Combined Finite-Discrete Element Method (FDEM) based code HOSS (Hybrid Optimization Software Suite) plays a pivotal role since numerical simulations of granular fault gouge allow for analysis of the mechanical behavior of the system at a level of spatial and temporal resolution not accessible experimentally, and also offer the possibility of identifying the most important parameters governing earthquake dynamics. The simulated data also provide very detailed stress, strain and motion information for machine learning purpose to predict earthquake. The code – HOSS – has been developed in Geophysics Group in LANL during the past ten years and is used to simulate the stick-slip behavior of granular fault gouge. One of the key feature of HOSS is that it is superior to pure finite element method and discrete element method and can provide very detailed evolvement information of granular fault gouge. Additionally, its parallel computing capability makes large scale earthquake gouge simulation possible. Taking these facts into account, and also because few other fully parallel FDEM code exists, this IC project allows LANL to stay at the forefront of earthquake gouge and granular material simulation in the world.

42 ENGINEERING↗

Improving Microstructural Quantification in 3D FIB-SEM Tomography

A detailed understanding of 3D microstructural features is crucial during postprocessing of the acquired data, while determining microstructural properties. Focused ion beam and scanning electron microscopy (fib-sem) is an ideal technique for the acquisition and quantification of 3D microstructures in subsurface features. In this work, we evaluated and implemented approaches to quantify 3D morphological features of plutonium oxalate and oxide particles. Image analysis, as well as statistical analysis were utilized to study the effect of process variables on the pore morphology of plutonium oxalate and oxide particles. The primary results were the creation of morphological maps of particles and identify indicators that correlated parameters allowing for discrimination between direct and reverse strike processes. This enabled us to properly quantify and map particles with their images obtained via sem. For this project, the highest correlation was found to be between Volume and Sphericity (R 2 = 0.7432) for the Revere Strike process, and Volume % and Sphericity (R 2 = 0.7450) for the Direct Strike process.

36 MATERIALS SCIENCE↗

Long Term Degradation of LSM Based SOFC Cathodes: Use of a Proven Accelerated Test Regimen

The overall goals of the program were: • To understand the microstructural basis of long-term performance loss in solid oxide fuel cells (SOFCs) with cathodes based on lanthanum strontium manganite (LSM, (La 1–x Sr x ) 1–yM nO 3±z ); • To develop strategies for optimizing LSM–based cathodes that achieve improved long-term performance, while exhibiting microstructural and chemical stability, for commercial fuel cell systems. The research project carried out accelerated testing of SOFCs with LSM-based cathodes of selected compositions. After intervals of accelerated testing (and control tests using non-accelerated conditions), the cells underwent extensive microstructural characterization to determine the physical and chemical changes in the cells. By analysis of a) the results of the testing, b) the observed microstructural changes, and c) the differences in these correlations between different cathode compositions and test durations, the research: • Identified a correlation between microstructural change and performance loss: specifically, between decrease of three-phase boundary (TPB) density and increase of area specific re-sistance (ASR) during operation; • Identified a cathode composition parameter — Mn excess, defined as 1/(1–y) in (La 1–x Sr x ) 1–y MnO 3±z ) — and how it affects TPB density, ASR and change of cell performance over time.

08 HYDROGEN↗