Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “control algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Chaos as the cause of randomness in tearing mode onset times in DIII-D ITER baseline scenario plasmas

The first evidence of widespread chaotic plasma dynamics relevant to the onset of disruptive tearing modes is found in DIII-D tokamak discharges. This evidence is obtained by calculating positive maximal Lyapunov exponents from Mirnov signals using the Rosenstein algorithm, implying the chaotic growth and/or rotation of magnetohydrodynamic modes in DIII-D [Luxon, Nucl. Fusion 42, 614 (2002)] plasmas. Such chaotic dynamics offer an explanation for the random tearing mode onset times previously observed in ITER baseline scenario discharges. Further, the Lyapunov timescales associated with this chaos could inhibit reliable prediction of tearing mode onset beyond the angular momentum confinement timescale; this constraint should inform the design of plasma control systems on ITER.

Chaotic dynamics↗
DOE OSTI2025

Quantum simulation of boson-related Hamiltonians: techniques, effective Hamiltonian construction, and error analysis

Elementary quantum mechanics proposes that a closed physical system consistently evolves in a reversible manner. However, control and readout necessitate the coupling of the quantum system to the external environment, subjecting it to relaxation and decoherence. Consequently, system-environment interactions are indispensable for simulating physically significant theories. A broad spectrum of physical systems in condensed-matter and high-energy physics, vibrational spectroscopy, and circuit and cavity QED necessitates the incorporation of bosonic degrees of freedom, such as phonons, photons, and gluons, into optimized fermion algorithms for near-future quantum simulations. In particular, when a quantum system is surrounded by an external environment, its basic physics can usually be simplified to a spin or fermionic system interacting with bosonic modes. Nevertheless, troublesome factors such as the magnitude of the bosonic degrees of freedom typically complicate the direct quantum simulation of these interacting models, necessitating the consideration of a comprehensive plan. This strategy should specifically include a suitable fermion/boson-to-qubit mapping scheme to encode sufficiently large yet manageable bosonic modes, and a method for truncating and/or downfolding the Hamiltonian to the defined subspace for performing an approximate but highly accurate simulation, guided by rigorous error analysis. In this pedagogical tutorial review, we aim to provide such an exhaustive strategy, focusing on encoding and simulating certain bosonic-related model Hamiltonians, inclusive of their static properties and time evolutions. Specifically, we emphasize two aspects: (1) the discussion of recently developed quantum algorithms for these interacting models and the construction of effective Hamiltonians, and (2) a detailed analysis regarding a tightened error bound for truncating the bosonic modes for a class of fermion-boson interacting Hamiltonians.

bosonic Hamiltonian↗
DOE OSTI2021

Chapter 18: Learning and Tracking Ad Hoc Fiducial Markers in Spatial Augmented Reality

We describe a spatial augmented reality system with a tangible user interface used to control computer simulations of complex systems. In spatial augmented reality, the user’s physical space is augmented with projected imagery, blending real objects with projected information, and a tangible user interface enables users to manipulate physical objects as controllers for interactive visualizations. Our system learns ad hoc objects in the user’s environment as fiducial markers (i.e., objects that are visually recognized and tracked). When combined with simulation and visualization tools, these interfaces allow the user to control simulations or ensembles of simulations via physical objects using apt metaphors. While other research has leveraged the use of depth cameras, our system enables the use of standard cameras in readily available smartphones and webcams and has an implementation that runs completely in JavaScript in the web browser. We discuss the prerequisite object-recognition requirements for such tangible user interfaces and describe computer-vision and machine-learning algorithms meeting those requirements. We conclude by presenting example applications, which are also available online.

energy distribution↗
DOE OSTI2022

Modeling Air Handling Units to Create a Diverse Fault Dataset for FDD Innovation: Lessons Learned and Recommendations

As energy management and information systems (e.g., automated fault detection and diagnostics [AFDD] tools) become more prevalent in the commercial building stock, it is important to determine the effectiveness of these technologies by benchmarking their performance. The authors have been working to develop the largest publicly available dataset of HVAC fault datasets for performance benchmarking applications, covering the most common HVAC systems and designs including chiller plants, rooftop packaged units, dual duct air handling unit and single duct air handling units. This study covers the development, modeling, and validation of a synthetic fault dataset for the air handling unit (AHU), one of the most common HVAC configurations found in the commercial building stock. Despite this being a common system, real-world time series data are scarce and usually do not span a wide range of weather conditions. Due to this limitation, two detailed AHU models, which included the single duct AHU and dual duct AHU developed in the Modelica language and HVACSIM+ were employed to carry out annual simulations of numerous common sensor faults, mechanical faults, and control sequence faults. The fault inclusive data were then validated by comparing fault effects on system performance to expected symptoms. We summarize the nature of each fault and their impacts under different weather and operation conditions. We report some lessons learnt during the efforts of validating the high volumes of the FDD data sets. Finally, we highlight considerations for FDD developers that may want to use this dataset to assess their algorithms’ performance and their improvement over time.

Casillas, Armando↗
DOE OSTI2025

Automating Bug Report Classification with Few Shot Learning

Orthogonal defect classification (ODC) is a method used to categorize software defects, providing valuable insights into the development process. This study focuses on automating the classification of software bug reports into different ODC defect types using few shot learning, a machine learning approach that requires minimal labeled data. Previous research has manually classified bug reports or used traditional machine learning algorithms like linear support vector machine, achieving limited success. Our approach uses few shot learning to improve classification accuracy and efficiency. The results show a harmonic mean of recall and precision (i.e., the F1 score) of around 0.6 which is a performance improvement over previous methods. The results highlight the potential benefit of few shot learning techniques and their application in enhancing the safety and reliability of nuclear digital instrumentation and control (DI&C) systems. Future work will explore incorporating advanced techniques to supplement the model's training data and achieve better results.

42 - ENGINEERING↗
DOE OSTI2025

Cost-optimized energy storage operation for a grid-connected solar PV system at community and individual scales

This study provides a comparative analysis of grid-connected PV-integrated battery storage at individual and community scales. The paper addresses the challenge of managing energy demand-generation mismatch by using a battery energy storage optimization algorithm, which minimizes operational costs while accounting for battery degradation. Also, this work introduces a broader evaluation basis that includes seasonal variability, grid exchange smoothness, and scalability across different battery capacities. Results show that community-scale storage more effectively dampens grid exchange power fluctuations and reduces system costs, particularly with moderate price differences between electricity buying and selling prices and low battery capacities. The paper also analyzes the impacts of static control versus cost-optimized battery system management. Here, it is shown that the gap in system costs between the cost-optimized and static control scenarios widens as the price difference increases.

25 ENERGY STORAGE↗
DOE OSTI2023

Synthesizing efficient circuits for Hamiltonian simulation

Abstract We provide an approach for compiling quantum simulation circuits that appear in Trotter, qDRIFT and multi-product formulas to Clifford and non-Clifford operations that can reduce the number of non-Clifford operations. The total number of gates, especially CNOT, reduce in many cases. We show that it is possible to implement an exponentiated sum of commuting Paulis with at most m (controlled)-rotation gates, where m is the number of distinct non-zero eigenvalues (ignoring sign). Thus we can collect mutually commuting Hamiltonian terms into groups satisfying one of several symmetries identified in this work. This allows an inexpensive simulation of the entire group of terms. We further show that the cost can in some cases be reduced by partially allocating Hamiltonian terms to several groups and provide a polynomial time classical algorithm that can greedily allocate the terms to appropriate groupings.

Mukhopadhyay, Priyanka (ORCID:0000000164639100)↗
DOE OSTI2022

A System Approach to Deep Heating Savings Through Measurement, Management, and Motivation

Across multi-tenant commercial office and multifamily buildings, centrally metered fuel use represents a substantial fraction of whole-building energy use. Energy audit practitioners understand that improving heating distribution efficiency is typically more of an opportunity than combustion efficiency and that differing thermal comfort preferences between tenants are the bane of operators across these building typologies. There is an unmet market need for retrofit technologies that allow for the delivery of the right amount of heat to the right spaces, at the right time. The Energy Management and Information System (EMIS) package fills this gap through enhanced controls and metering, incorporating low-cost sensors and wireless communication infrastructure to provide a platform for ongoing commissioning and tenant feedback, including heat cost allocation. With support from the US DOE Building Technologies Office, Steven Winter Associates, Inc. (SWA) partnered with Sentient Buildings, E Source, building owners, and utility and policy stakeholders, to demonstrate a market viable EMIS that achieves a reduction in space heating energy use by reducing heating load, improving control, and positively impacting behavior while providing an acceptable financial return. In this study, EMIS packages were implemented in two New York City multifamily rental buildings. Both buildings conducted basic mechanical work (e.g., repairing steam traps) to ensure the heating system was operating well before any tenant feedback was layered in. Heating Energy Use Reports (HEUR) were created to provide tenants with social comparisons and energy savings tips to influence their behavior; these were provided monthly to all tenants in both buildings. Additionally, one building allocated heating costs to a portion of the tenants. Heat cost allocation (HCA) has a long history in the European Union (EU), although it is not common in the US or in steam-heated buildings. SWA leveraged existing EU best practices and stakeholder feedback to develop a Heat Cost Allocation algorithm that was considered equitable and intuitive. Energy use and tenant behavior impacts were tracked throughout the study. The basic mechanical repair work saved between 11-20% of heating energy. Those savings rose to 17-24% with the addition of tenant feedback. While it may not be possible to precisely determine the impact of COVID-19 on research studies like this, there may have been additional savings realized had the study taken place in a period of normal occupancy patterns. These types of central heating systems have been a blind spot for utilities, who have traditionally had little visibility into detailed behind-the-meter gas usage. Heating energy savings stayed consistent during the coldest months, indicating the potential for utilities to utilize EMIS packages for peak gas demand reductions or demand response programs. Tenant comfort was also improved. Post installation, room temperatures more closely matched thermostat set points. Perhaps due to this greater level of control, the vast majority of tenants being billed for heating were accepting of the allocation costs. And tenants receiving heat cost allocations were more likely to reduce their thermostat setpoints than tenants receiving behavioral feedback without financial impacts were. Variation in building specifics makes it difficult to provide precise energy and financial savings estimates. But within the range of expected conditions, the study identified a few key variables that can have the greatest impact on financial returns: the cost of fuel, the ability and willingness to allocate heating costs to tenants, and a well-functioning heating system as a starting point. This study focused on two multifamily buildings, but additional use cases, such as commercial buildings and affordable housing, should be explored to better understand the full market potential. While this type of upgrade has the potential for deep energy reductions and cost savings, future projects should take into account the balance of costs and benefits between owners and tenants, especially in the affordable, regulated, or other low-to-moderate income (LMI) segments of the market. Rent credits, utility allowances, or a shared savings program are possible options to accelerate adoption of this strategy in these market segments.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Relative Controls of Vapor Pressure Deficit and Soil Water Stress on Canopy Conductance in Global Simulations by an Earth System Model

Climate change impacts drought and vapor pressure deficit (VPD) that critically influence land-atmosphere water vapor and CO 2 exchange. There is a lack of model-based global evaluation of the relative roles of the two types of water stresses in limiting canopy conductance (G c ). Using the Energy Exascale Earth System Model (E3SM), we conducted four land-atmosphere coupled simulations for the historical period with and without a plant hydraulics scheme (PHS) and under present-day and quadrupling of CO 2 concentrations. By fitting an empirical model of G c to the E3SM simulations, we evaluated the sensitivity of G c to water stresses caused by VPD and soil water (SW) in the growing season. The empirical model is based on a multiplicative algorithm that adjusts G c according to VPD, soil water saturation, and their interaction. Our results show positive trends of VPD over land during the historical period, with large differences between simulations with and without PHS. Despite the differences, a majority of land pixels that experience both SW and VPD stresses are in semi-arid and tropical savanna ecosystems. G c is more sensitive to VPD than SW in less than 20% of land pixels where the empirical model provides a good fit for the simulated G c . Ignoring SW and VPD interaction may underestimate the relative role of VPD on G c by as much as 28%. Including PHS accentuates SW stress limitation on G c by simulating wetter soil and higher ET that lower VPD. Elevated CO 2 reduces G c by increasing water use efficiency and ameliorates SW stress on G c .

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Data coverage assessment on neural network based digital twins for autonomous control system

We report in a recently developed Nearly Autonomous Management and Control (NAMAC) system, neural networks (NNs) are used to develop digital twins for diagnosis (DT-Ds). However, NNs are not usually considered extrapolation models and may result in large errors if they are applied to unseen data outside the training data (uncovered). In this study, we propose a data coverage assessment (DCA) to determine if the NN-based DT-Ds are extrapolated based on their epistemic uncertainty. The uncertainty quantification algorithms and uncertainty thresholds are selected based on the confusion matrix of classifying evaluation data into covered or uncovered data. To demonstrate the adaptability of the proposed framework, we applied it to a basic feedforward neural network and a more advanced recurrent neural network based on a more nonlinear database. Case studies show that the proposed framework can distinguish unseen data for both basic and advanced applications with proper uncertainty quantification algorithms and thresholds.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

A reacting multiphase computational flow model for 2,3-butanediol synthesis in industrial-scale bioreactors

The microbe, Zymomonas mobilis, can efficiently convert sugars to 2,3 butanediol (BDO), an important intermediate for downstream chemical products, only in a well-controlled microaerated environment. However, controlling oxygen distribution in industrial-scale bioreactors is challenging, and at-scale BDO production is hard to optimize using traditional engineering methods. This study takes a step towards addressing this problem through a computational model for reacting multiphase flows in large-scale bioreactors. A phenomenological metabolic model was first developed and validated against experiments, and then it was coupled to a multiphase computational fluid dynamics (CFD) solver using a subcycling algorithm for simulating long conversion times (~30 hours). Large-scale (~500 m 3 ) bubble column simulations using this coupled approach demonstrated a 25% improvement in BDO yield with low sparging rates (0.002 m/s) and low height-to-diameter ratio (0.875) compared to a baseline bubble column (35 m height, 5 m diameter) with a superficial gas velocity of 0.06 m/s.

09 BIOMASS FUELS↗
DOE OSTI2026

Ab Initio Bulk Free Energy Surface of Proper Ferroelectrics

We report a systematic and accurate approach for deriving the bulk free energy surface (FES), a function of temperature, polarization, and strain, from the first-principles density functional theory (DFT) of proper ferroelectrics. The core of our approach is the metadynamics algorithm that extracts the polarization dependence of the FES from all-atom molecular dynamics simulations without an a priori ansatz. The rest of the FES is derived from the metadynamics trajectories that span the relevant phase space. We demonstrate our approach in the case of lead titanate. The errors across the phase transition, due to DFT numerics, all-atom molecular dynamics, and free energy evaluation by enhanced sampling, can be systematically controlled and are of the order of 1 meV/atom. The accuracy of the resulting ab initio FES is only limited by the adopted functional approximation of DFT.

Xie, Pinchen [Lawrence Berkeley National Laborator↗
DOE OSTI2022

Avoiding excess computation in asynchronous evolutionary algorithms

Abstract Asynchronous evolutionary algorithms are becoming increasingly popular as a means of making full use of many processors while solving computationally expensive search and optimization problems. These algorithms excel at keeping large clusters fully utilized, but may sometimes inefficiently sample an excess of fast‐evaluating solutions at the expense of higher‐quality, slow‐evaluating ones. We have previously introduced a steady‐state parent selection strategy, SWEET (“Selection whilE EvaluaTing”), that sometimes selects individuals that are still being evaluated and allows them to reproduce early. We perform a takeover‐time analysis that confirms that this strategy gives slow‐evaluating individuals that have higher fitnesses an increased ability to multiply in the population. We also find that SWEET appears effective at improving optimization performance on problems in which solution quality is positively correlated with evaluation time. We evaluate our approach on six simulated real‐valued optimization problems and three real‐world applications: an autonomous vehicle controller problem that involves tuning a spiking neural network and two adversarial EA problems. We further evaluate SWEET versus a basic asynchronous process in a simulated setting. We present evidence that SWEET outperforms basic asynchronous processes in a use‐case in which performance is positively correlated with evaluation time, and performs comparably (and often better) than basic asynchronous processes in several use‐cases where performance is negatively correlated with evaluation time. That said, in the cases where performance and evaluation time are negatively correlated the variance of outcomes for SWEET is notably high.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

MITgcm-AD v2: Open source tangent linear and adjoint modeling framework for the oceans and atmosphere enabled by the Automatic Differentiation tool Tapenade

The Massachusetts Institute of Technology General Circulation Model (MITgcm) is widely used by the climate science community to simulate planetary atmosphere and ocean circulations. A defining feature of the MITgcm is that it has been developed to be compatible with an algorithmic differentiation (AD) tool, TAF, enabling the generation of tangent-linear and adjoint models. These provide gradient information which enables dynamics-based sensitivity and attribution studies, state and parameter estimation, and rigorous uncertainty quantification. Importantly, gradient information is essential for computing comprehensive sensitivities and performing efficient large-scale data assimilation, ensuring that observations collected from satellites and in-situ measuring instruments can be effectively used to optimize a large uncertain control space. As a result, the MITgcm forms the dynamical core of a key data assimilation product employed by the physical oceanography research community: Estimating the Circulation and Climate of the Ocean (ECCO) state estimate. Although MITgcm and ECCO are used extensively within the research community, the AD tool TAF is proprietary and hence inaccessible to a large proportion of these users. The new version 2 (MITgcm-AD v2) framework introduced here is based on the source-to-source AD tool Tapenade, which has recently been open-sourced. Another feature of Tapenade is that it stores required variables by default (instead of recomputing them) which simplifies the implementation of efficient, AD-compatible code. The framework has been integrated with the MITgcm model’s main branch and is now freely available.

Adjoints↗
DOE OSTI2021

Processed Lab Data for Neural Network-Based Shear Stress Level Prediction

Machine learning can be used to predict fault properties such as shear stress, friction, and time to failure using continuous records of fault zone acoustic emissions. The files are extracted features and labels from lab data (experiment p4679). The features are extracted with a non-overlapping window from the original acoustic data. The first column is the time of the window. The second and third columns are the mean and the variance of the acoustic data in this window, respectively. The 4th-11th column is the the power spectrum density ranging from low to high frequency. And the last column is the corresponding label (shear stress level). The name of the file means which driving velocity the sequence is generated from. Data were generated from laboratory friction experiments conducted with a biaxial shear apparatus. Experiments were conducted in the double direct shear configuration in which two fault zones are sheared between three rigid forcing blocks. Our samples consisted of two 5-mm-thick layers of simulated fault gouge with a nominal contact area of 10 by 10 cm^2. Gouge material consisted of soda-lime glass beads with initial particle size between 105 and 149 micrometers. Prior to shearing, we impose a constant fault normal stress of 2 MPa using a servo-controlled load-feedback mechanism and allow the sample to compact. Once the sample has reached a constant layer thickness, the central block is driven down at constant rate of 10 micrometers per second. In tandem, we collect an AE signal continuously at 4 MHz from a piezoceramic sensor embedded in a steel forcing block about 22 mm from the gouge layer The data from this experiment can be used with the deep learning algorithm to train it for future fault property prediction.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Novel estimation of aerosol processes with particle size distribution measurements: a case study with the TOMAS algorithm v1.0.0

Atmospheric aerosol microphysical processes are a significant source of uncertainty in predicting climate change. Specifically, aerosol nucleation, emissions, and growth rates, which are simulated in chemical transport models to predict the particle size distribution, are not understood well. However, long-term size distribution measurements made at several ground-based sites across Europe implicitly contain information about the processes that created those size distributions. This work aims to extract that information by developing and applying an inverse technique to constrain aerosol emissions as well as nucleation and growth rates based on hourly size distribution measurements. We developed an inverse method based upon process control theory into an online estimation technique to scale aerosol nucleation, emissions, and growth so that the model–measurement bias in three measured aerosol properties exponentially decays. The properties, which are calculated from the measured and predicted size distributions, used to constrain aerosol nucleation, emission, and growth rates are the number of particles with a diameter between 3 and 6 nm, the number with a diameter greater than 10 nm, and the total dry volume of aerosol ( N 3–6 , N 10 , V dry ), respectively. In this paper, we focus on developing and applying the estimation methodology in a zero-dimensional “box” model as a proof of concept before applying it to a three-dimensional simulation in subsequent work. The methodology is first tested on a dataset of synthetic and perfect measurements that span diverse environments in which the true particle emissions, growth, and nucleation rates are known. The inverse technique accurately estimates the aerosol microphysical process rates with an average and maximum error of 2 % and 13 %, respectively. Next, we investigate the effect that measurement noise has on the estimated rates. The method is robust to typical instrument noise in the aerosol properties as there is a negligible increase in the bias of the estimated process rates. Finally, the methodology is applied to long-term datasets of in situ size distribution measurements in western Europe from May 2006 through June 2007. At Melpitz, Germany, and Hyytiälä, Finland, the average diurnal profiles of estimated 3 nm particle formation rates are reasonable, having peaks near noon local time with average peak values of 1 and 0.15 cm –3 s –1 , respectively. The normalized absolute error in estimated N 3–6 , N 10 , and V dry at three European measurement sites is less than 15 %, showing that the estimation framework developed here has potential to decrease model–measurement bias while constraining uncertain aerosol microphysical processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Scalable Circuits for Preparing Ground States on Digital Quantum Computers: The Schwinger Model Vacuum on 100 Qubits

The vacuum of the lattice Schwinger model is prepared on up to 100 qubits of IBM’s Eagle-processor quantum computers. A new algorithm to prepare the ground state of a gapped translationally invariant system on a quantum computer is presented, which we call “scalable circuits ADAPT-VQE” (SC-ADAPT-VQE). This algorithm uses the exponential decay of correlations between distant regions of the ground state, together with ADAPT-VQE, to construct quantum circuits for state preparation that can be scaled to arbitrarily large systems. These scalable circuits can be determined with use of classical computers, avoiding the challenging task of optimizing parameterized circuits on a quantum computer. SC-ADAPT-VQE is applied to the Schwinger model, and is shown to be systematically improvable, with an accuracy that converges exponentially with circuit depth. Both the structure of the circuits and the deviations of prepared wave functions are found to become independent of the number of spatial sites, L . This allows a controlled extrapolation of the circuits, determined with use of small or modest-sized systems, to arbitrarily large L . The circuits for the Schwinger model are determined on lattices up to L = 14 (28 qubits) with the Qiskit classical simulator, and are subsequently scaled up to prepare the L = 50 (100 qubits) vacuum on IBM’s 127-superconducting-qubit quantum computers ibm_brisbane and ibm_cusco. After introduction of an improved error-mitigation technique, which we call “operator decoherence renormalization”, the chiral condensate and charge-charge correlators obtained from the quantum computers are found to be in good agreement with classical matrix product state simulations. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗