SEARCH · Engineering Papers

Results for “PION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Performance of a Front End prototype ASIC for picosecond precision time measurements with LGAD sensors

For the High-Luminosity phase of LHC, the ATLAS experiment is proposing the addition of a High Granularity Timing Detector (HGTD) in the forward region, to mitigate the effects of the increased pile-up. The chosen detection technology is Low Gain Avalanche Detector (LGAD) silicon sensors that can provide an excellent timing resolution below 50 ps. The front-end read-out ASIC must exploit the large signal derivative and small noise provided by the sensor, while keeping low power consumption. This paper presents the results on the first prototype of a front-end ASIC, named ALTIROC0, which contains the analog stages (preamplifier and discriminator) of the read-out chip. The ASIC was characterised both alone and as part of a module with a 2×2 LGAD array of 1.1×1.1 mm 2 pads bump-bonded to it. The various contributions of the electronics to the time resolution were investigated in test-bench measurements with a calibration setup. Both when the ASIC is alone or with a bump-bonded sensor, the jitter of the ASIC is better than 20 ps for an injected charge of 10 fC. The time walk effect, which arises from the different preamplifier response for various injected charges, can be corrected up to 10 ps using a Time Over Threshold measurement. The combined performance of the ASIC and the LGAD sensor, which was measured during a beam test campaign in October 2018 with pions of 120 GeV energy at the CERN SPS, is around 40 ps for all measured modules. All tested modules show good efficiency and time resolution uniformity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2021

The DAQ system of the 12,000 channel CMS high granularity calorimeter prototype

The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ≈12,000 channels of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry Pi computers.

47 OTHER INSTRUMENTATION↗

DOE OSTI2022

Investigations on a fuzzy process: effect of diffusion on calibration and particle identification in Liquid Argon Time Projection Chambers

Ionization electron diffusion in Liquid Argon Time Projection Chambers (LArTPCs) has typically been considered at the detector design stage, but little attention has been given to its effects on calibration and particle identification. We use a GEANT4-based simulation to study how diffusion impacts these techniques, and give consideration to how this effect is simulated. We find that diffusion can cause a drift-dependent bias to both the median and Most Probable Value (MPV) of dQ/dx distributions. The bias is estimated to be ~2.5% (median) and ~5.0% (MPV) for typical maximum drift times in currently running LArTPCs before adding detector specific considerations such as electric field non-uniformities. This information indicates that these metrics should not be used for calibration without care, contrary to the conventional wisdom. The impact of diffusion on the ability of LArTPCs to separate muons and protons is small, and not expected to pose any problems in future detectors. Diffusion may however be a significant source of systematic uncertainty when separating particles of more similar masses (muons and pions, kaons and protons). Separation of such populations may be improved by implementation of a drift-time dependent particle identification.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

Data-driven precision determination of the material budget in ALICE

The knowledge of the material budget with a high precision is fundamental for measurements of direct photon production using the photon conversion method due to its direct impact on the total systematic uncertainty. Moreover, it influences many aspects of the charged-particle reconstruction performance. In this article, two procedures to determine data-driven corrections to the material-budget description in ALICE simulation software are developed. One is based on the precise knowledge of the gas composition in the Time Projection Chamber. The other is based on the robustness of the ratio between the produced number of photons and charged particles, to a large extent due to the approximate isospin symmetry in the number of produced neutral and charged pions. Both methods are applied to ALICE data allowing for a reduction of the overall material budget systematic uncertainty from 4.5% down to 2.5%. Using these methods, a locally correct material budget is also achieved. The two proposed methods are generic and can be applied to any experiment in a similar fashion.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

The optimal use of segmentation for sampling calorimeters

One of the key design choices of any sampling calorimeter is how fine to make the longitudinal and transverse segmentation. Here, to inform this choice, we study the impact of calorimeter segmentation on energy reconstruction. To ensure that the trends are due entirely to hardware and not to a sub-optimal use of segmentation, we deploy deep neural networks to perform the reconstruction. These networks make use of all available information by representing the calorimeter as a point cloud. To demonstrate our approach, we simulate a detector similar to the forward calorimeter system intended for use in the ePIC detector, which will operate at the upcoming Electron Ion Collider. We find that for the energy estimation of isolated charged pion showers, relatively fine longitudinal segmentation is key to achieving an energy resolution that is better than 10% across the full phase space. These results provide a valuable benchmark for ongoing EIC detector optimizations and may also inform future studies involving high-granularity calorimeters in other experiments at various facilities.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

Measured gain suppression in FBK LGADs with different active thicknesses

In recent years, the gain suppression mechanism has been studied for large localized charge deposits in Low-Gain Avalanche Detectors (LGADs). LGADs are a thin silicon detector with a highly doped gain layer that provides moderate internal signal amplification. Using the CENPA Tandem accelerator at the University of Washington, the response of LGADs with different thicknesses to MeV-range energy deposits from a proton beam were studied. Three LGAD prototypes of 50 μm, 100 μm, and 150 μm were characterized. The devices' gain was determined as a function of bias voltage, incidence beam angle, and proton energy. This study was conducted in the scope of the PIONEER experiment, an experiment proposed at the Paul Scherrer Institute to perform high-precision measurements of rare pion decays. LGADs are considered for the active target (ATAR), and energy linearity is an important property for particle ID capabilities.

Particle tracking detectors↗

DOE OSTI2026

Reconstruction of neutrino events in the Accelerator Neutrino Neutron Interaction Experiment. Part I

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) was designed to reconstruct neutrino events from the Fermilab Booster Neutrino Beam (BNB) with the parallel goals of measuring neutron production in interactions with oxygen and serving as a testbed for new technology. The ANNIE detector consists of a 26-ton water Cherenkov target tank instrumented with conventional photomultiplier tubes (PMTs), a downstream tracking muon spectrometer, and an upstream double wall of plastic scintillator to serve to veto charged particles incoming from neutrino events that occur upstream of the experimental setup. ANNIE has also deployed multiple Large-Area Picosecond PhotoDetectors (LAPPDs) and a test vessel of water-based liquid scintillator (WbLS). This paper describes the event reconstruction performance of the detector before implementation of these novel technologies, which will serve as a baseline against which their impact can be measured. That said, even the techniques used for event reconstruction using only the conventional PMT array and muon spectrometer are significantly different than those used in other water Cherenkov detectors due to the small size of ANNIE (which makes nanosecond-scale timing not as useful as in a large detector) and the availability of reconstruction information from the tracking muon spectrometer. We demonstrate that combining the information from these two elements into a single fit using only pattern recognition yields a muon vertex uncertainty of 60 cm, a directional uncertainty of 13.2 degrees, and energy reconstruction uncertainty of about 10% for BNB muon neutrino Charged Current Zero Pion (CC0π) events.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Sensitivity of the Cherenkov Telescope Array to TeV photon emission from the Large Magellanic Cloud

ABSTRACT A deep survey of the Large Magellanic Cloud at ∼0.1–100 TeV photon energies with the Cherenkov Telescope Array is planned. We assess the detection prospects based on a model for the emission of the galaxy, comprising the four known TeV emitters, mock populations of sources, and interstellar emission on galactic scales. We also assess the detectability of 30 Doradus and SN 1987A, and the constraints that can be derived on the nature of dark matter. The survey will allow for fine spectral studies of N 157B, N 132D, LMC P3, and 30 Doradus C, and half a dozen other sources should be revealed, mainly pulsar-powered objects. The remnant from SN 1987A could be detected if it produces cosmic-ray nuclei with a flat power-law spectrum at high energies, or with a steeper index 2.3–2.4 pending a flux increase by a factor of >3–4 over ∼2015–2035. Large-scale interstellar emission remains mostly out of reach of the survey if its >10 GeV spectrum has a soft photon index ∼2.7, but degree-scale 0.1–10 TeV pion-decay emission could be detected if the cosmic-ray spectrum hardens above >100 GeV. The 30 Doradus star-forming region is detectable if acceleration efficiency is on the order of 1−10 per cent of the mechanical luminosity and diffusion is suppressed by two orders of magnitude within <100 pc. Finally, the survey could probe the canonical velocity-averaged cross-section for self-annihilation of weakly interacting massive particles for cuspy Navarro–Frenk–White profiles.

Astronomy & Astrophysics↗

DOE OSTI2025

Dilepton Production from Moaton Quasiparticles

The phase diagram of QCD probably exhibits a moat regime over a large region of temperature 𝑇 and chemical potential 𝜇 ≠ 0. A moat regime is characterized by quasiparticle moatons (pions) whose energy is minimal at nonzero spatial momentum. At 𝜇 ≠ 0, higher mass dimension operators play a critical role in a moat regime. At dimension six, there are nine possible gauge-invariant couplings between scalars and photons. For back-to-back dilepton production, only one operator contributes, which significantly enhances production near a moat threshold. This enhancement is an experimental signature of moatons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

Efficient lattice QCD computation of radiative-leptonic-decay form factors at multiple positive and negative photon virtualities

In previous work [D. Giusti, Methods for high-precision determinations of radiative-leptonic decay form factors using lattice QCD, Phys. Rev. D 107, 074507 (2023)], we showed that form factors for radiative leptonic decays of pseudoscalar mesons can be determined efficiently and with high precision from lattice QCD using the “three-dimensional (3D) method,” in which three-point functions are computed for all values of the current insertion time and the time integral is performed at the data-analysis stage. Here, we demonstrate another benefit of the 3D method: the form factors can be extracted for any number of nonzero photon virtualities from the same three-point functions at no extra cost. We present results for the $D_s → ℓνγ*$ vector form factor as a function of photon energy and photon virtuality, for both positive and negative virtuality, for a single ensemble with 340 MeV pion mass and 0.11 fm lattice spacing. In our analysis, we separately consider the two different time orderings and the different quark flavors in the electromagnetic current. We discuss in detail the behavior of the unwanted exponentials contributing to the three-point functions, as well as the choice of fit models and fit ranges used to remove them for various values of the virtuality. While positive photon virtuality is relevant for decays to multiple charged leptons, negative photon virtuality suppresses soft contributions and is of interest in QCD-factorization studies of the form factors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

$Ξ$ 𝑐 → $Ξ$ form factors from lattice QCD with domain-wall quarks: A new piece in the puzzle of $Ξ^0_𝑐$ decay rates

We present a lattice quantum chromodynamics (QCD) determination of the vector and axial-vector form factors that describe the charm-baryon semileptonic decays Ξ 𝑐 → Ξ⁢ℓ + ⁢𝜈 ℓ . The calculation uses a domain-wall action for the up, down, and strange quarks, and an anisotropic clover action for the charm quark. We use four ensembles of gauge-field configurations generated by the RBC and UKQCD collaborations, with lattice spacings between 0.111 and 0.073 fm and pion masses ranging from 420 to 230 MeV. We present Standard Model predictions for the decay rates and branching fractions of Ξ$^0_𝑐$ → Ξ$^−_𝑐$⁢ℓ + ⁢𝜈 ℓ and Ξ$^+_𝑐$ → Ξ$^0_𝑐$⁢ℓ + ⁢𝜈 ℓ for ℓ =𝑒, 𝜇. In particular, we obtain Γ⁡(Ξ$^0_𝑐$ → Ξ − ⁢𝑒 + ⁢𝜈 𝑒 )/|𝑉 𝑐⁢𝑠 | 2 = 0.2515⁢(73) ps −1 and ℬ⁡(Ξ$^0_𝑐$ → Ξ − ⁢𝑒 +⁢ 𝜈 𝑒 ) = 3.58⁢(12)%. These values are higher than those predicted by a previous lattice calculation and substantially higher than the experimentally measured values, but consistent with expectations from approximate 𝑆⁢𝑈⁡(3) flavor symmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Accessing the gluon momentum fraction of nucleons through the gradient flow

We calculate the gluon momentum fraction of the nucleon using lattice QCD, with a nonperturbative renormalization technique based on the gradient flow. The gluon momentum fraction is determined on a single Wilson-clover ensemble using 𝑁 𝑓 =2 +1 flavors with pion mass 358 MeV and lattice spacing 0.094 fm. We employ the variational method to reduce excited-state contamination and apply the distillation framework to ensure a large operator basis. To reduce systematic uncertainties, we apply Bayesian model averaging to all fit procedures. We apply matching coefficients to the flow-time dependent lattice results to recover the gluon momentum fraction in the $\overline{MS}$-scheme at 2 GeV. Our final result is ⟨𝑥⟩ 𝑔 ⁢(𝜇 =2 GeV) =0.482⁢(35), where we quote only statistical uncertainties.

Lattice QCD↗

DOE OSTI2026

Measurement of muon neutrino charged-current quasielasticlike cross section using off-axis NuMI beam at ICARUS

This paper presents the first neutrino cross-section measurement from the ICARUS detector at Fermilab, using Neutrinos at the Main Injector (NuMI) beam data collected from two beam operation periods corresponding to 2.5 × 10 20 protons-on-target in neutrino beam mode. The signal is defined by events with no pions produced in the final state, a topology dominated by charged-current quasielasticlike signatures. The measurement is reported as flux-averaged differential cross sections as functions of kinematic variables that provide sensitivity to the complex nuclear effects that often dominate the systematic uncertainty budgets of neutrino oscillation measurements. Specifically, this work reports cross sections in two angular variables—the angle of the outgoing lepton and the opening angle between the lepton and leading proton—and two variables characterizing the kinematic imbalance between the muon and proton in the plane transverse to the incoming neutrino. These results are compared against predictions from a variety of neutrino event generators, with p values calculated between the extracted cross sections and each prediction. Overall, the predictions agree with the data; however, the current budget of uncertainties does not yet provide sufficient discriminating power to favor a specific model.

Abd Alrahman, F. [Houston U.]↗

DOE OSTI2025

First Differential Measurement of the Single 𝜋 + Production Cross Section in Neutrino Neutral-Current Scattering

Since its first observation in the 1970s, neutrino-induced neutral-current single positive pion production (NC⁢1⁢𝜋 + ) has remained an elusive and poorly understood interaction channel. This process is a significant background in neutrino oscillation experiments and studying it further is critical for the physics program of next-generation accelerator-based neutrino oscillation experiments. In this Letter, we present the first double-differential cross-section measurement of NC⁢1⁢𝜋 + interactions using data from the ND280 detector of the T2K experiment collected in 𝜈-beam mode. The measured flux-averaged integrated cross section is 𝜎 = (6.07 ± 1.22) × 10 −41 cm 2 /nucleon. We compare the results on a hydrocarbon target to the predictions of several neutrino interaction generators and final-state-interaction models. While model predictions agree with the differential results, the data show a weak preference for a cross-section normalization approximately 30% higher than predicted by most models studied in this Letter.

Neutrino detection↗

DOE OSTI2025

New physics particles mixing with mesons: Production in the fragmentation chain

A class of extensions to the Standard Model adds hypothetical long-lived particles (LLPs) that have mass- or kinetic-mixing with neutral mesons, such as pions or rho mesons. The mixing can contribute significantly to the production of LLPs at proton accelerator experiments, and no consistent description of these production modes exists in the literature. In this paper, we develop a framework for studying different LLPs—dark photons, vector mediators coupled to the baryon current, and axionlike particles with different coupling patterns. In particular, we implement the production mechanisms in PYTHIA 8, study how the overall flux and kinematic distributions depend on the LLP’s mass, and compare various subprocesses where the mixing contributes—proton bremsstrahlung, meson decay, and production in the fragmentation chain. We find that our new description of LLP production predicts an integrated flux that differs from current approaches by one to two orders of magnitude, and highlight the unavoidable theoretical uncertainties coming from poor knowledge of the properties of heavy mesons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

Strangeness in the proton from $W+$ charm production and SIDIS data

We perform a global QCD analysis of unpolarized parton distribution functions (PDFs) in the proton, including new 𝑊+⁢ charm production data from 𝑝⁢𝑝 collisions at the LHC and semi-inclusive pion and kaon production data in lepton-nucleon deep-inelastic scattering, both of which have been suggested for constraining the strange quark PDF. Compared with a baseline global fit that does not include these datasets, the new analysis reduces the uncertainty on the strange quark distribution over the range 0.01 < 𝑥 < 0.3, and provides a consistent description of processes sensitive to strangeness in the proton. Including the new datasets, the ratio of strange to nonstrange sea quark distributions is $R_s = (s + \bar{s})/(\bar{u} +\bar{d})$ $=$ {$0.7⁢2^{+0.52}_{−0.34}, 0.4⁢6^{+0.30}_{−0.20}, 0.3⁢2^{+0.23}_{−0.15}$} for 𝑥 ={$0.01, 0.04, 0.1$} at 𝑄 2 $=$ 4 GeV 2 . The data place more stringent constraints on the strange asymmetry $(s - \bar{s})$, which is found to be consistent with zero in this range.

Anderson, Trey [College of William and Mary, Willi↗

DOE OSTI2025

Model-independent measurement of 𝐷 0 −$\overline{D}$ 0 mixing parameters in 𝐷 0 → 𝐾$^{0}_{𝑆}$⁢𝜋 + ⁢𝜋 − decays at Belle and Belle II

We perform a model-independent measurement of the 𝐷 0 −$\overline{D}$ 0 mixing parameters using samples of 𝑒 + ⁢𝑒 − -collision data collected by the Belle and Belle II experiments that have integrated luminosities of 951 fb −1 and 408 fb −1 , respectively. Approximately 2.05 × 10 6 neutral 𝐷 mesons are reconstructed in the 𝐷 0 → 𝐾$^{0}_{S}$⁢𝜋 + ⁢𝜋 − channel, with the neutral 𝐷 flavor tagged by the charge of the pion in the 𝐷* + → 𝐷 0⁢ 𝜋 + decay. Assuming charge-parity symmetry, the mixing parameters are measured to be 𝑥 = (4.0 ±1.7 ±0.4) × 10 −3 and 𝑦 = (2.9 ±1.4 ±0.3) × 10 −3 , where the first uncertainties are statistical and the second systematic. The results are consistent with previous determinations.

Charmed mesons↗

DOE OSTI2025

Semi-inclusive direct photon + jet and 𝜋 0 + jet correlations measured in 𝑝 + 𝑝 and central Au + Au collisions at $\sqrt{s_{NN}}$ = 200GeV

The STAR experiment at RHIC reports new measurements of jet quenching based on the semi- inclusive distribution of charged-particle jets recoiling from direct photon (γ dir ) and neutral pion (π 0 ) triggers in pp and central Au + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV, for triggers in the range 9 < $E$$^{trig}_{T}$ < 20 GeV. The datasets have integrated luminosities of 3.9nb −1 for Au + Au and 23pb −1 for 𝑝𝑝 collisions. Jets are reconstructed using the anti-𝑘 𝑇 algorithm with resolution parameters 𝑅 = 0.2 and 0.5. The large uncorrelated jet background in central Au + Au collisions is corrected using a mixed-event approach, which enables precise charged-particle jet measurements at low transverse momentum 𝑝$^{ch}_{𝑇,jet}$ and large 𝑅. Recoil-jet distributions are reported in the range 𝑝$^{ch}_{𝑇,jet}$ < 25 GeV/𝑐. Comparison of the distributions measured in 𝑝𝑝 and Au + Au collisions reveals strong medium-induced jet yield suppression for 𝑅 = 0.2 with markedly less suppression for 𝑅 = 0.5. Comparison is also made to theoretical models incorporating jet quenching. Furthermore, these data provide new insight into the mechanisms underlying jet quenching and the angular dependence of medium-induced jet-energy transport and provide new constraints on modeling such effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗