Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Determination of the plasma effective charge from the soft X-ray spectrum and plasma conductivity at the L-2M stellarator after boronization of the vacuum chamber

Boronization of the vacuum chamber wall results in a considerable change in the composition of the plasma generated in working pulses of the L-2M stellarator and, accordingly, in the plasma effective charge. The paper presents results of measurements of the plasma effective charge carried out by two methods in the ohmic heating mode: from the data on the plasma conductivity and from the soft X-ray spectrum of plasma emission. Comparison of the values of the plasma effective charge obtained by these two methods makes it possible to determine the conditions in which the two values are in good agreement. Under these conditions, the plasma effective charge can be correctly estimated from spectral measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optically detected cyclotron resonance in heavily boron-doped silicon nanostructures on n-Si (100)

Electron and hole cyclotron resonance at a frequency of 94 GHz is detected by a change in the intensity of photoluminescence lines whose positions are identical to those of dislocation luminescence lines D1 and D2 in single-crystal silicon and in heavily boron-doped silicon nanostructures on the Si (100) surface. The angular dependence of the spectrum of the optically detected cyclotron resonance corresponds to the tensor of the electron and hole effective mass in single-crystal silicon, and the resonance-line width indicates long carrier free-path times close to 100 ps. The results obtained are discussed within the framework of the interrelation of the electron-vibration coupling to charge and spin correlations in quasi-one-dimensional chains of dangling bonds in silicon.

36 MATERIALS SCIENCE↗

High‐Yield Synthesis of Stoichiometric Boron Nitride Nanostructures

Boron nitride (BN) nanostructures are structural analogues of carbon nanostructures but have completely different bonding character and structural defects. They are chemically inert, electrically insulating, and potentially important in mechanical applications that include the strengthening of light structural materials. These applications require the reliable production of bulk amounts of pure BN nanostructures in order to be able to reinforce large quantities of structural materials, hence the need for the development of high‐yield synthesis methods of pure BN nanostructures. Using borazine (B 3 N 3 H 6 ) as chemical precursor and the hot‐filament chemical vapor deposition (HFCVD) technique, pure BN nanostructures with cross‐sectional sizes ranging between 20 and 50 nm were obtained, including nanoparticles and nanofibers. Their crystalline structure was characterized by (XRD), their morphology and nanostructure was examined by (SEM) and (TEM), while their chemical composition was studied by (EDS), (FTIR), (EELS), and (XPS). Taken altogether, the results indicate that all the material obtained is stoichiometric nanostructured BN with hexagonal and rhombohedral crystalline structure.

Nocua, José E.↗

Wall conditioning and ELM mitigation with boron nitride powder injection in KSTAR

Results from KSTAR powder injection experiments, in which tens of milligrams of boron nitride (BN) were dropped into low-power H-mode plasmas, show an improvement in wall conditions in subsequent discharges and, in some cases, a reduction or elimination of edge-localized modes (ELMs). Injected powder is distributed by the plasma flow and is deposited on the wall and, over the course of several discharges, was observed to gradually reduce recycling by 33%, and decrease both the ELM amplitude and frequency. This is the first demonstration of the use of BN for ELM mitigation. In all of these experiments, an Impurity Powder Dropper (IPD) was used to introduce precise, controllable amounts of the materials into ELMy H-mode KSTAR discharges. The plasma duration was between 10 s and 15 s, 𝐼𝑝 = 500 kA, 𝐵𝑇 = 1.8 T, 𝑃NBI = 1.6 MW, and 𝑃ECH = 0.6 MW. Plasma densities were between 2 and 3 × 1019 m−3. In all cases, the pre-fill and startup gas-fueling was kept constant, suggesting that the decrease in baseline D𝛼 emission is in fact due to a reduction in recycling. The results presented herein highlight the viability of powder injection for intra-shot and between-shot wall conditioning.

Gilson, Erik↗

Amorphous boron nitride: synthesis, properties and device application

Amorphous boron nitride (a-BN) exhibits remarkable electrical, optical, and chemical properties, alongside robust mechanical stability, making it a compelling material for advanced applications in nanoelectronics and photonics. This review comprehensively examines the unique characteristics of a-BN, emphasizing its electrical and optical attributes, state-of-the-art synthesis techniques, and device applications. Key advancements in low-temperature growth methods for a-BN are highlighted, offering insights into their potential for integration into scalable, CMOS-compatible platforms. Additionally, the review discusses the emerging role of a-BN as a dielectric material in electronic and photonic devices, serving as substrates, encapsulation layers, and gate insulators. Finally, perspectives on future challenges, including defect control, interface engineering, and scalability, are presented, providing a roadmap for realizing the full potential of a-BN in next-generation device technologies.

36 MATERIALS SCIENCE↗

Fundamentals and emerging optical applications of hexagonal boron nitride: a tutorial

Hexagonal boron nitride (hBN), also known as white graphite, is a transparent layered crystal with a wide bandgap. Its crystal structure resembles graphite, featuring layers composed of honeycomb lattices held together through van der Waals forces. The layered crystal structure of hBN facilitates exfoliation into thinner flakes and makes it highly anisotropic in in-plane and out-of-plane directions. Unlike graphite, hBN is both insulating and transparent, making it an ideal material for isolating devices from the environment and acting as a waveguide. As a result, hBN has found extensive applications in optical devices, electronic devices, and quantum photonic devices. This comprehensive tutorial aims to provide readers with a thorough understanding of hBN, covering its synthesis, lattice and spectroscopic characterization, and various applications in optoelectronic and quantum photonic devices. This tutorial is designed for both readers without prior experience in hBN and those with expertise in specific fields seeking to understand its relevance and connections to others.

36 MATERIALS SCIENCE↗

Enhancement of surface area and wettability properties of boron doped diamond by femtosecond laser-induced periodic surface structuring

We demonstrate the formation of laser-induced periodic surface structures (LIPSS) in boron-doped diamond (BDD) by irradiation with femtosecond near-IR laser pulses. The results show that the obtained LIPSS are perpendicular to the laser polarization, and the ripple periodicity is on the order of half of the irradiation wavelength. The surface structures and their electrochemical properties were characterized using Raman micro-spectroscopy, in combination with scanning electron and atomic force microscopies. The textured BDD surface showed a dense and large surface area with no change in its structural characteristics. The effective surface area of the textured BDD electrode was approximately 50% larger than that of a planar substrate, while wetting tests showed that the irradiated area becomes highly hydrophilic. Lastly, our results indicate that LIPSS texturing of BDD is a straightforward and simple technique for enhancing the surface area and wettability properties of the BDD electrodes, which could enable higher current efficiency and lower energy consumption in the electrochemical oxidation of toxic organics.

36 MATERIALS SCIENCE↗

Boron-Lined Straw-Tube Neutron Detector Test

Radiation portal monitors used for interdiction of illicit materials at borders include highly sensitive neutron detection systems. The main reason for having neutron detection capability is to detect fission neutrons from plutonium. The currently deployed radiation portal monitors (RPMs) from Ludlum and Science Applications International Corporation (SAIC) use neutron detectors based upon 3He-filled gas proportional counters, which are the most common large neutron detector. There is a declining supply of 3He in the world, and thus, methods to reduce the use of this gas in RPMs with minimal changes to the current system designs and sensitivity to cargo-borne neutrons are being investigated. Four technologies have been identified as being currently commercially available, potential alternative neutron detectors to replace the use of 3He in RPMs. Reported here are the results of tests of a boron-lined proportional counter design variation. In the testing described here, the neutron detection efficiency and gamma ray rejection capabilities of a system manufactured by Proportional Technologies, Inc, was tested.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron Reference Benchmark Field Specification: ACRR 44 Inch Lead-Boron (LB44) Bucket Environment (ACRR-LB44-CC-32-CL)

This report was put together to support the International Atomic Energy Agency (IAEA) REAL- 2016 activity to validate the dosimetry community’s ability to use a consistent set of activation data and to derive consistent spectral characterizations. The report captures details of integral measurements taken in the Annular Core Research Reactor (ACRR) central cavity with the 44 inch Lead-Boron (LB44) bucket, reference neutron benchmark field. The field is described and an “a priori” calculated neutron spectrum is reported, based on MCNP6 calculations, and a subject matter expert (SME) based covariance matrix is given for this “a priori” spectrum. The results of 31 integral dosimetry measurements in the neutron field are reported.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Heterojunction of Boron Nitride and Carbon Nanotubes: Synthesis and Characterization

The advancement of silicon (Si) technology has led to faster and smaller computers and smart cellphones. Unfortunately, further miniaturization of semiconductor devices will encounter fundamental physics limitations, including short channel effects, high contact resistance, and high heat dissipation, which will deteriorate device energy efficiency. In this project, we have explore into the creation of tunneling field effect transistors (TFETs) and switches without using semiconductors. Since these devices did not involve the use of semiconductors, our approach would have bypassed the above-mentioned limits of Si devices. During the course of this two-year funding period, we have successfully 1) Identify the essential conditions for the synthesis of co-axial hetero-junctions of boron nitride nanotubes (BNNTs) and carbon nanotubes (CNTs), i.e., co-axial BNNTs/CNTs junctions. 2) Investigate the switching behaviors of a series of precursor materials, including a) branching BNNTs/CNTs junctions, b) graphene-BNNTs junctions, and c) quantum-dots functionalized BNNTs (QDs-BNNTs).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chemical Vapor Deposition of Cubic Boron Nitride

This project explored chemical vapor deposition as a technique to synthesis cubic boron nitride (c-BN) for electronics and coating applications. Current c-BN synthesis techniques are greatly limiting due to requiring high pressure or non-equilibrium energy sources, such as ion bombardment.

36 MATERIALS SCIENCE↗

Preshot Report for Carbonara: Dynamics of a Boron Carbide Sandwich

The main purpose of the Carbonara experiment is to provide much-needed data to inform physics modeling of boron carbide (B 4 C) subjected to a sweeping high explosive (HE) detonation. The proposed experiment will include three separate shots, each employing a rectangular slab of HE (4” × 3” × 1”) sandwiched between two wedges of B 4 C, see Fig.1. In each case the top B 4 C wedge tapers from a height of 2.5 cm to 0.5 cm, while the bottom wedge tapers from 1.5 cm to 0.5 cm. The wedges are 4” in the direction of the proton beam, and 3” in the direction transverse to the beam. Three shots are currently planned, each one using a different HE: PBX 9501, PBX 9502, and PBX 9701. The HE will be initiated using a line wave generator (LWG) to preserve planar symmetry, in conjunction with a Comp. B booster to smooth out the profile for the initial condition on the main charge and to aid in initiation of the PBX 9502 shot. In each case the booster spans the entire length and height of the main HE slab and extends 0.5” in toward the LWG.

36 MATERIALS SCIENCE↗

Hexagonal Boron Nitride Reinforced Multifunctional Well Cement for Extreme Conditions

The overarching objective of this project was to provide a system approach for developing the next generation of well cementing with remarkable multifunctional, high performance characteristics including mechanical, thermal, rheological and durability properties to prevent offshore spill and leakage at extreme high temperature, high pressure (HTHP) and corrosive conditions. Building on our scientifically illustrated principles, the objective of Phase I was to develop and tune our current proof-of-concept hexagonal boron-nitride (hBN)/cement composite to offer the best hybrid nanostructure, and optimum slurry formulation and rheological properties in environments with a variety of extreme conditions including high temperature, high pressure, and high acidity. This phase also focused on testing the actual barrier efficiency and performance of our new cement formulation against gas/liquid leakage at HT, and/or corrosive conditions. The objective of Phase 2 was product validation (meeting API/EPA standards), cost/risk analysis, and scale-up to facilitate integration for primary well cementing with no/minimal modification.

02 PETROLEUM↗

Synthesis and Functionalization of Coal Fly Ash-Derived Zeolites for Boron Removal From Wastewater

There are hundreds of both active and unused surface impoundments in the United States containing coal combustion residuals (CCRs) produced by coal-fired power plants which can leach toxic elements into surface and groundwater. Therefore, the development of efficient means for both the clean-up of surface impoundments and for deriving economically viable products from CCRs are urgent tasks for researchers. Herein, a microwave-assisted strategy is presented for converting a common coal combustion residual, coal fly ash (CFA), into zeolite-based sorbents for boron (B) removal from wastewater. Specifically, CFA constitutes the main source of Si and Al ions to produce zeolite type-A and the resulting sorbent subsequently undergoes simple cation exchange with Ca to enhance its B adsorption capacity. Structure and composition of the sorbents were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), inductively coupled plasma (ICP)-mass spectrometry (MS), and ICP-optical emission spectroscopy (OES). The Ca-modified zeolite sorbent derived from CFA exhibits comparable B removal capacity with similar commercial zeolites.

Muldoon, Patrick↗

Synthesis and characterization of zeolite sorbents from coal fly ash by a microwave-assisted hydrothermal method for removal of boron leachate from coal impoundments

This study developed promoted zeolite-based sorbents derived from coal fly ash to remove leachates (like boron) from ash impoundment or landfill to protect the environment and reuse legacy coal ash. The sorbents were synthesized using machine learning model results as guide to accelerate the sorbent development.

Wang, Ping↗