Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Temperature-dependent changes in gas chromatographic separation metrics for trihexyl(tetradecyl)phosphonium-based ionic liquid stationary phases and comparison to conventional polysiloxane stationary phases

Here, to assess whether the trihexyl(tetradecyl)phosphonium chloride ([P 66614 + ][Cl - ]) ionic liquid (IL), employed as a gas chromatographic stationary phase, exhibits temperature-dependent phase transitions or structural heterogeneity, retention thermodynamics for probe molecules of varied chemical structure were investigated by gas chromatography (GC) over the temperature range of 25 to 64 °C using van’t Hoff analysis. All van’t Hoff plots for n-alkanes (C8–C12) and other probe analytes were linear, indicating the absence of detectable phase-transition behavior. The [P 66614 + ][Cl - ] IL was further compared with the [P 66614 + ] bis[(trifluoromethyl)sulfonyl]imide ([P 66614 + ][NTf 2 - ]) IL and commercial polysiloxane stationary phases in terms of temperature-dependent resolution behavior and chromatographic selectivity over the temperature range of 28–52 °C. The resolution factors of analytes in mixtures obtained using gas chromatography–mass spectrometry (GC–MS) and the summation of resolution values decreased smoothly with temperature on both IL stationary phases and on the dimethylphenylcyano-substituted polymeric stationary phase (OV-1701), whereas the poly(50% diphenyl/50% dimethyl siloxane) stationary phase (SPB-50) exhibited irregularities in its temperature-dependent summation of resolution profile, showing a distinct maximum in the temperature range of 34–40 °C. Selectivity values for the IL stationary phases were largely determined by the anion, with the [P 66614 + ][Cl - ] IL providing enhanced separation between polar and aromatic analytes, while the [P 66614 + ][NTf 2 - ] IL favored dispersive and π-π interactions that resulted in a reversal of elution order for some aliphatic–aromatic and alkyne-containing analyte pairs. Capillary columns prepared using different surface activation methods and coated with identical [P 66614 + ][Cl - ] IL stationary phase showed indistinguishable temperature-dependent trends in summation of resolution value and selectivity. An evaluation of analyte-specific selectivity provides insight into the characteristic separation behavior of the stationary phases and enables identification of analyte classes that are more efficiently separated on the [P 66614 + ]-based IL stationary phases compared to conventional stationary phase materials.

Chromatographic selectivity↗
DOE OSTI2026

Probing Quantum Anomalous Hall States in Twisted Bilayer WSe 2 via Attractive Polaron Spectroscopy

Moiré superlattices in semiconductors exhibit a rich variety of interaction-induced topological states, including quantum anomalous Hall (QAH) effects. A recent study hinted that twisted WSe 2 homobilayer (tWSe 2 ) could host a QAH state but lacked direct evidence of ferromagnetism, a key hallmark of this phase. Here, we report the first direct evidence of QAH states in tWSe 2 with spontaneous ferromagnetism. Specifically, we employ polarization-resolved attractive polaron spectroscopy on a dual-gated, 2° tWSe 2 and observe direct signatures of spontaneous time-reversal symmetry breaking at hole filling 𝜈 = 1. Together with a Chern number (𝐶) measurement via Streda formula analysis, we identify this magnetized state as a topological state, characterized by 𝐶 = 1. Furthermore, we demonstrate that these topological and magnetic properties are tunable via a finite displacement field, between a QAH ferromagnetic state and an antiferromagnetic state. Our findings position tWSe 2 as a highly versatile, stable, and optically addressable platform for investigating topological order and strong correlations in two-dimensional landscapes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1982

A search for equilibrium states

An efficient search algorithm is described for the location of equilibrium states in a search set of states which differ from one another only by the choice of pure phases. The algorithm has three important characteristics: (1) it ignores states which have little prospect for being an improved approximation to the true equilibrium state; (2) it avoids states which lead to singular iteration equations; (3) it furnishes a search history which can provide clues to alternative search paths.

Zeleznik, F. J.↗
DOE OSTI2024

Development of a broadband reflective phase retarder to generate circularly polarized light for MTW-OPAL and multipetawatt lasers

Here, our research focuses on designing metallic coatings to create broadband all-reflective phase retarders that generate circularly polarized (CP) light for the MTW-OPAL Laser System while ensuring the desired polarization state on the target. This all-reflective phase retarder can function as a phase retarder when used in an out-of-plane configuration, whereas it acts as a normal mirror set in an in-plane configuration. If the polarization of the beam is not purely s- or p-polarized, however, mirrors will in general introduce retardance, and therefore compensators or polarization-independent mirror pairs are needed to ensure the desired polarization at the target plane.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Machine learning to alleviate Hubbard-model sign problems

Lattice Monte Carlo calculations of interacting systems on nonbipartite lattices exhibit an oscillatory imaginary phase known as the phase or sign problem, even at zero chemical potential. One method to alleviate the sign problem is to analytically continue the integration region of the state variables into the complex plane via holomorphic flow equations. For asymptotically large flow times, the state variables approach manifolds of constant imaginary phase known as Lefschetz thimbles. Furthermore, flowing such variables and calculating the ensuing Jacobian is a computationally demanding procedure. In this paper, we demonstrate that neural networks can be trained to parametrize suitable manifolds for this class of sign problem and drastically reduce the computational cost for different severely afflicted small volume systems. In particular, we apply our method to the Hubbard model on the triangle and tetrahedron, both of which are nonbipartite. At strong interaction strengths and modest temperatures, the tetrahedron suffers from a severe sign problem that cannot be overcome with standard reweighting techniques, while it quickly yields to our method. We benchmark our results with exact calculations and comment on future directions of this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Astrophysical significance of the isomer 119⁢𝑚 Ag demonstrated through a direct mass measurement

Here, the abundance of elements heavier than iron produced via the astrophysical rapid-neutron-capture process depends sensitively on the atomic mass of the involved nuclei as well as the behavior of a few special types of nuclear isomers called “astromers.” High-precision mass measurements of 119 Cd and 119 Ag and their respective isomeric states have been performed with the phase-imaging ion cyclotron resonance (PI-ICR) method with a precision of 𝛿⁢𝑚/𝑚 ≈ 10 −8 using the Canadian Penning trap. The ground-state mass excess, as well as the excitation energy, agrees with recent Penning trap measurements from JYFLTRAP. Network calculations using these new measurements have revealed that, contrary to previous expectations, 119⁢𝑚 Ag behaves as an astromer, which significantly affects the population of 119 Ag .

Rivero, F. [University of Notre Dame, IN (United S↗
DOE OSTI2021

Tunable Nanoscale Evolution and Topological Phase Transitions of a Polar Vortex Supercrystal

Here, understanding the phase transitions and domain evolutions of mesoscale topological structures in ferroic materials is critical to realizing their potential applications in next-generation high-performance storage devices. Here, the behaviors of a mesoscale supercrystal are studied with 3D nanoscale periodicity and rotational topology phases in a PbTiO 3 /SrTiO 3 (PTO/STO) superlattice under thermal and electrical stimuli using a combination of phase-field simulations and X-ray diffraction experiments. A phase diagram of temperature versus polar state is constructed, showing the formation of the supercrystal from a mixed vortex and α-twin state and a temperature-dependent erasing process of a supercrystal returning to a classical α-twin structure. Under an in-plane electric field bias at room temperature, the vortex topology of the supercrystal irreversibly transforms to a new type of stripe-like supercrystal. Under an out-of-plane electric field, the vortices inside the supercrystal undergo a topological phase transition to polar skyrmions. These results demonstrate the potential for the on-demand manipulation of polar topology and transformations in supercrystals using electric fields. The findings provide a theoretical understanding that may be utilized to guide the design and control of mesoscale polar structures and to explore novel polar structures in other systems and their topological nature.

P=phase-field simulations↗
DOE OSTI2020

Quantum-well states in fractured crystals of the heavy-fermion material CeCoIn5

Quantum-well states appear in metallic thin films due to the confinement of the wave function by the film interfaces. Using angle-resolved photoemission spectroscopy, we unexpectedly observe quantum-well states in fractured single crystals of CeCoIn5. We confirm that confinement occurs by showing that these states’ binding energies are photon-energy independent and are well described with a phase accumulation model, commonly applied to quantum-well states in thin films. This indicates that atomically flat thin films can be formed by fracturing hard single crystals. For the two samples studied, our observations are explained by free-standing flakes with thicknesses of 206 and 101 Å. We extend our analysis to extract bulk properties of CeCoIn5. Specifically, we obtain the dispersion of a three-dimensional band near the zone center along in-plane and out-of-plane momenta. We establish part of its Fermi surface, which corresponds to a hole pocket centered at G. We also reveal a change of its dispersion with temperature, a signature that may be caused by the Kondo hybridization.

36 MATERIALS SCIENCE↗
NASA NTRS2006

The Incredible Diversity of Fe-bearing Phases at Gusev Crater, Mars, According to the Mars Exploration Rover Moessbauer Spectrometer

The Mars Exploration Rover (MER) Spirit landed on the plains of Gusev Crater on 4 January 2004. One primary scientific objective for the mission is to characterize the mineralogical and elemental composition of surface materials, searching for evidence of water and clues for assessing past and current climates and their suitability for life [1]. The role of the Moessbauer (MB) spectrometer on Spirit is to provide quantitative information about the distribution of Fe among its oxidation and coordination states, identification of Fe-bearing phases, and relative distribution of Fe among those phases. The speciation and distribution of Fe in Martian rock and soil constrains the primary rock types, redox conditions under which primary minerals crystallized, the extent of alteration and weathering, the type of alteration and weathering products, and the processes and environmental conditions for alteration and weathering. In this abstract, we discuss the incredible diversity of Fe-bearing phases detected by Spirit s MB instrument during its first 540 sols of exploration at Gusev crater [2,3].

Morris, R. V.↗
DOE OSTI2024

Frustration-mediated crossover from long-range to short-range magnetic ordering in Y 1 – x L u x BaC o 4 O 7

The R⁢BaC⁢o 4⁢ O 7 system is a prototype geometrically frustrated magnet in which kagome planes and triangular layers of Co-O tetrahedra interleave. For R=Y, an antiferromagnetic ground state is realized due to a frustration-breaking trigonal-orthorhombic phase transition. For R = Lu, however, a long-range ordered state has rarely, if ever, been reported despite a similar symmetry-breaking transition, albeit at a significantly lower temperature. To explore this dichotomy, we present a comprehensive magnetic and structural phase diagram for Y 1-x L⁢u x BaC⁢o 4 ⁢O 7 , established through complementary neutron diffraction and magnetization measurements. Our results outline the phase evolution of the nuclear structures in response to changes in composition and temperature. Further, the temperature of the trigonal (P⁢31⁢c) to orthorhombic (Pbn⁢2 1 ) transition, T s⁢1 , decreases monotonically with increasing Lu content from 310 K for x = 0.0 to 110 K for x = 1.0. In Lu-rich compositions (0.7 ≤ x ≤ 1.0), first-order structural transitions are observed with coexisting and competing orthorhombic Pbn⁢2 1 and metastable monoclinic Cc phases. For the magnetically ordered Y-rich compositions, T- and x-dependent refinements of the magnetic structure reveal an antiferromagnetic “ribbonlike” arrangement of Co spin pairs in both the triangular and the kagome layers. A gradual suppression of long-range magnetic order is observed with increasing the Lu content, accompanied by the development of short-range magnetic correlations present in all the samples.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Novel Data Segmentation Method for Data-driven Phase Identification

This paper presents a smart meter phase identification algorithm for two cases: meter-phase-label-known and meter-phase-label-unknown. To improve the identification accuracy, a data segmentation method is proposed to exclude data segments that are collected when the voltage correlation between smart meters on the same phase is weakened. Then, using the selected data segments, a hierarchical clustering method is used to calculate the correlation distances and cluster the smart meters. If the phase labels are unknown, a Connected-Triple-based Similarity (CTS) method is adapted to further improve the phase identification accuracy of the ensemble clustering method. The methods are developed and tested on both synthetic and real feeder data sets. Here, simulation results show that the proposed phase identification algorithm outperforms the state-of-the-art methods in both accuracy and robustness.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Simultaneous ambient pressure x-ray photoelectron spectroscopy and grazing incidence x-ray scattering in gas environments

We have developed an experimental system to simultaneously measure surface structure, morphology, composition, chemical state, and chemical activity for samples in gas phase environments. This is accomplished by simultaneously measuring x-ray photoelectron spectroscopy (XPS) and grazing incidence x-ray scattering in gas pressures as high as the multi-Torr regime while also recording mass spectrometry. Scattering patterns reflect near-surface sample structures from the nano-scale to the meso-scale, and the grazing incidence geometry provides tunable depth sensitivity of structural measurements. Scattered x rays are detected across a broad range of angles using a newly designed pivoting-UHV-manipulator for detector positioning. At the same time, XPS and mass spectrometry can be measured, all from the same sample spot and under ambient conditions. To demonstrate the capabilities of this system, we measured the chemical state, composition, and structure of Ag-behenate on a Si(001) wafer in vacuum and in O 2 atmosphere at various temperatures. These simultaneous structural, chemical, and gas phase product probes enable detailed insights into the interplay between the structure and chemical state for samples in gas phase environments. The compact size of our pivoting-UHV-manipulator makes it possible to retrofit this technique into existing spectroscopic instruments installed at synchrotron beamlines. Because many synchrotron facilities are planning or undergoing upgrades to diffraction limited storage rings with transversely coherent beams, a newly emerging set of coherent x-ray scattering experiments can greatly benefit from the concepts we present here.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

New Covariant Density Functionals of Nuclear Matter for Compact Star Simulations

We generate three families of extended covariant density functionals of nuclear matter that have varying slope of symmetry energy and skewness at nuclear saturation density, but otherwise share the same basic parameters (symmetry energy, compressibility, saturation parameters, etc.) with the standard DDME2, DD2, and MPE functionals. Tables of the parameters of these new density functionals are given, which can be straightforwardly used in DDME2, DD2, and MPE parameterization-based codes. Furthermore, we provide tables of a large number of equations of state (81 for each family) that can be used in astrophysical simulations to assess the impact of variations of the not-well-known slope of symmetry energy and skewness of nuclear systems on the astrophysics of compact objects. We also provide tables of computed integral parameters (mass, radius, and tidal deformability) that can be used, e.g., for modeling gravitational waveforms. Finally, for the extended DDME2-based parameterization, we implement a first-order phase transition to quark matter to obtain a family of equations of state that accommodates a phase transition to quark matter. Analogous tables of the equations of state and integral parameters are provided for this case as well.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Capturing the ground state of uranium dioxide from first principles: Crystal distortion, magnetic structure, and phonons

Uranium dioxide (UO 2 ) remains a formidable challenge for first-principles approaches due to the complex interplay among spin-orbit coupling, Mott physics, magnetic ordering, and crystal distortions. Here we use DFT+U to explore UO 2 at zero temperature, incorporating all the aforementioned phenomena. The technical challenge is to navigate the many metastable electronic states produced by DFT+U, which is accomplished using f-orbital occupation matrix control to search for the ground state. We restrict our search to the high-symmetry ferromagnetic phase, including spin-orbit coupling, which produces a previously unreported occupation matrix. This newfound occupation matrix is then used as an initialization to explore the broken symmetry phases. We find the oxygen cage distortion of the 3k antiferromagnetic state to be in excellent agreement with experiments, and both the spin-orbit coupling and the Hubbard U are critical ingredients. Further, we demonstrate that only select phonon modes have a strong dependence on the Hubbard U, whereas magnetic ordering has only a small influence overall. We perform measurements of the phonon dispersion curves using inelastic neutron scattering, and our calculations show good agreement when using reasonable values of U. The quantitative success of DFT+U warrants exploration of thermal transport and other observables within this level of theory.

36 MATERIALS SCIENCE↗
NASA NTRS1975

A generalized expression for lag-time in the gas-phase permeation of hollow tubes

A generalized expression for the nonsteady-state parameter, lag-time, has been obtained from Fick's second law for gas-phase transport through hollow, cylindrical membranes. This generalized expression is simplified for three limiting cases of practical interest: (1) diffusion controlled transport, (2) phase boundary reaction control at the inlet surface, and (3) phase boundary reaction control at the outlet surface. In all three cases the lag-time expressions were found to be inversely proportional only to the diffusion coefficient and functionally dependent on the membrane radii. Finally, the lag-time expressions were applied to experimentally obtained lag-time data for alpha-phase titanium and alpha-phase iron.

Shah, K. K.↗
DOE OSTI2025

Adaptive Linear State Estimation for Unbalanced Distribution System

The inclusion of PMU functionality in distribution relays enables the implementation of a linear state estimator (LSE) in Distribution Systems (DS). However, the unbalanced topology and phase coupling in distribution lines necessitate modifications to the LSE formulation. Additionally, the higher fault frequency in distribution systems requires a state estimation approach that is resilient to contingencies. This work proposes an adaptive linear state estimation algorithm tailored for unbalanced distribution systems with single-phase and two-phase laterals. Furthermore, a modified Optimal PMU Placement (OPP) strategy is introduced to ensure full observability in distribution systems with single-phase and two-phase buses. To maintain adaptability to topology changes, the state estimator incorporates circuit breaker status data provided by PMUs, ensuring robust performance during topology changes triggered by faults. The performance of the algorithm is verified on the IEEE 13-bus, 34-bus, and 123-bus systems.

PMUs↗
DOE OSTI2022

Quantitative measurements of density in shock-compressed silver up to 330 GPa using x-ray diffraction

This work presents a structural study of shock-compressed states in Ag to 331 GPa, accessed via laser shock compression. Structures of the resulting crystalline phases and the average atomic distribution of the liquid state are determined using in situ x-ray diffraction. We employ structure factor analysis, adapted for a non-monochromatic x-ray source, to determine the density of the liquid phase from analysis of x-ray diffraction data for the first time in shock compressed Ag. We also present a detailed analysis of the crystalline phases, which shows good agreement with the phase boundaries reported in previous experimental and theoretical works. We utilize the whole powder pattern fitting approach implemented in the MAUD package to constrain stacking faults in the face centered cubic structure. We observe the ambient fcc structure up to a stress of 146 GPa before a transition to a body-centered cubic structure and liquid phase at 179 GPa, with full melting above 212 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

The intrinsic mechanical properties of hydromagnesite, Mg 5 (CO 3 ) 4 (OH) 2 ·4H 2 O, a key phase of reactive MgO carbonate cement

To potentially enable CO 2 sequestration, reactive MgO carbonate cement is emerging as an alternative binder to Portland cement. Understanding the mechanical properties of its binding phase is critical for understanding the strength development and performing materials design for reactive MgO cement systems; however, the intrinsic mechanical properties of hydromagnesite (Mg 5 (CO 3 ) 4 (OH) 2 ·4H 2 O), a key binding phase, remain unexplored. Here the present study utilized synchrotron-based high-pressure X-ray diffraction to determine the unit cell-scale, intrinsic mechanical properties of hydromagnesite for the first time. Up to hydrostatic loading of 7.7 GPa, the bulk modulus of hydromagnesite was determined as 59 GPa or 71 GPa fitted using the second-order or third-order Birch-Murnaghan equation of state, which we contextualize with binding phases in various cement systems. The experiment results are applicable in materials design of low-carbon concrete and valuable for the validation and calibration of atomistic models.

36 MATERIALS SCIENCE↗