Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum correlations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Massively parallel quantum chemical density matrix renormalization group method

Here, we present, to the best of our knowledge, the first attempt to exploit the supercomputer platform for quantum chemical density matrix renormalization group (QCDMRG) calculations. We have developed the parallel scheme based on the in-house MPI global memory library, which combines operator and symmetry sector parallelisms, and tested its performance on three different molecules, all typical candidates for QC-DMRG calculations. In case of the largest calculation, which is the nitrogenase FeMo cofactor cluster with the active space comprising 113 electrons in 76 orbitals and bond dimension equal to 6000, our parallel approach scales up to approximately 2000 CPU cores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation Structure and Magnetic Properties of Mn-Doped ZnO Nanoparticles Prepared by Hydrothermal Method

In this research, manganese-doped ZnO (Zn{sub 0.99-x}Mn{sub x}O) nanoparticles were synthesized by hydrothermal method using the chemicals. The samples were annealed at 500 and 600 °C to figure out the optimum annealing temperature characterized by differential thermal analysis (DTA) method. Simultaneously with DTA analysis, the possible weight loss was observed by thermal gravimetric (TG) method and categorized the lost chemicals with varying temperature regions. The crystal structure with lattice parameters and the phases were determined by X-ray diffraction method. Microstrain (ε), stress (σ), the dislocation density (δ), the locality of the atoms and their displacements (u), and the bond length (L) values were calculated by making use of lattice parameters. The particle morphologies were monitored by scanning electron microscope (SEM) technique and the elemental compositions of the samples were investigated and found that all peaks belong to Zn, Mn, and O elements. The magnetic properties of the samples were revealed using Quantum design PPMS measurement system and correlated with structural properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

ν-point energy correletors with F AST EEC: Small-x physics from LHC jets

In recent years, energy correlators have emerged as a powerful tool for studying jet substructure, with promising applications such as probing the hadronization transition, analyzing the quark-gluon plasma, and improving the precision of top quark mass measurements. The projected N-point correlator measures correlations between N final-state particles by tracking the largest separation between them, showing a scaling behavior related to DGLAP splitting functions. These correlators can be analytically continued in N, commonly referred to as ν-correlators, allowing access to non-integer moments of the splitting functions. Of particular interest is the ν → 0 limit, where the small momentum fraction behavior of the splitting functions requires resummation. Originally, the computational complexity of evaluating ν-correlators for M particles scaled as 2 2M , making it impractical for real-world analyses. However, by using recursion, we reduce this to M 2M , and through the FastEEC method of dynamically resolving subjets, M is replaced by the number of subjets. This breakthrough enables, for the first time, the computation of ν-correlators for LHC data. In practice, limiting the number of subjets to 16 is sufficient to achieve percent-level precision, which we validate using known integer-ν results and convergence tests for non-integer ν. We have implemented this in an update to FastEEC and conducted an initial study of power-law scaling in the perturbative regime as a function of ν, using CMS Open Data on jets. The results agree with DGLAP evolution, except at small ν, where the anomalous dimension saturates to a value that matches the BFKL anomalous dimension.

Energy correlators↗

Multireference Methods for Chemistry and Materials Science: Automated Active Spaces, Efficient Dynamic Correlation, and Extended Systems

While multiconfigurational approaches have long been relegated to expert practitioners working on a case-by-case basis, recent developments have increasingly made these methods more routine and applicable to broader sets of systems. This article outlines the state-of-the-art in multiconfigurational approaches, with an emphasis on moving from delicate hand-selected pathways through configuration space toward more robust and efficient approaches to treating a host of challenging chemical systems accurately. First, we overview recent work in automated active-space selection, which has enabled increasingly large-scale applications of multireference methods to modeling vertical excitations and reactivity. Second, we highlight the increasingly efficient methods for recovering correlation energy beyond the active space, as headlined by extensions of pair-density functional theory and its role in accurate and efficient treatment of excited-state dynamics and its utilization to train machine-learned potentials. Finally, we highlight recent efforts to treat extended systems that until recently have lied beyond the traditional limits of active-space methods, giving center stage to product-form wave functions of the localized active space family of methods that allow for the computation of multiconfigurational band structures. These recent advancements point to a broader use of multireference approaches for high-impact chemical and materials science applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of Phase Separation on Rayleigh-Plateau Type Instabilities in Alloys

Classical molecular dynamics (MD) simulations are used to investigate the role of phase separation (PS) on the Rayleigh-Plateau (RP) instability. Ni–Ag bulk structures are created at temperatures (2000 K and 1400 K) that generate different PS length scales, λ PS , relative to the RP instability length scale, λRP. Rectanguloids are then cut from the bulk structures and patterned with a perturbation of certain amplitude and wavelength, λ RP . It is found that when λ PS << λ RP (2000 K), the patterned rectanguloids break up into nanoparticles in a manner consistent with classical RP theory, whereas when λ PS << λ RP (1400 K), soluto-capillarity affects the RP instability significantly. Specifically, since Ag has a lower surface energy than Ni, Ag migrates to cover neighboring Ni regions, therefore modifying the RP instability. Thus, we demonstrate that the phase separation length scale of an immiscible alloy can be exploited to direct the assembly of functional bimetallic alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Remarkable effects of disorder on superconductivity of single atomic layers of lead on silicon

In bulk materials, superconductivity is remarkably robust with respect to non-magnetic disorder. In the two-dimensional limit, however, disorder and electron correlations both tend to destroy the quantum condensate. Here we study, both experimentally and theoretically, the effect of structural disorder on the local spectral response of crystalline superconducting monolayers of lead on silicon. In a direct scanning tunnelling microscopy measurement, we reveal how the local superconducting spectra lose their conventional character and show variations at scales significantly shorter than the coherence length. We demonstrate that the precise atomic organization determines the robustness of the superconducting order with respect to structural defects, such as single atomic steps, which may disrupt superconductivity and act as native Josephson barriers. We expect that our results will improve the understanding of microscopic processes in surface and interface superconductivity, and will open a new way of engineering atomic-scale superconducting quantum devices.

36 MATERIALS SCIENCE↗

Dominant end-tunneling effect in two distinct Luttinger liquids coexisting in one quantum wire

Luttinger liquids occupy a notable place in physics as one of the most understood classes of quantum many-body systems. The experimental mission of measuring its main prediction, power laws in observable quantities, has already produced a body of exponents in different semiconductor and metallic structures. Here, we combine tunneling spectroscopy with density-dependent transport measurements in the same quantum wires over more than two orders of magnitude in temperature to very low electron temperatures down to ∼40 mK. This reveals that, when the second 1D subband becomes populated, the temperature dependence splits into two ranges with different exponents in the power-law dependence of the conductance, both dominated by the finite-size effect of the end-tunneling process. This result demonstrates the importance of measuring the Luttinger parameters as well as the number of modes independently through spectroscopy in addition to the transport exponent in the characterization of Luttinger liquids. This opens a pathway to unambiguous interpretation of the exponents observed in quantum wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topology and geometry under the nonlinear electromagnetic spotlight

For many materials, a precise knowledge of their dispersion spectra is insufficient to predict their ordered phases and physical responses. Instead, these materials are classified by the geometrical and topological properties of their wavefunctions. A key challenge is to identify and implement experiments that probe or control these quantum properties. In this Review, we describe recent progress in this direction, focusing on nonlinear electromagnetic responses that arise directly from quantum geometry and topology. Furthermore, we give an overview of the field by discussing theoretical ideas, experiments and the materials that drive them. We conclude by discussing how these techniques can be combined with device architectures to uncover, probe and ultimately control quantum phases with emergent topological and correlated properties.

36 MATERIALS SCIENCE↗

Understanding the links between composition, polyhedral distortion, and luminescence properties in green-emitting β-Si 6–z Al z O z N 8–z :Eu 2+ phosphors

Inorganic phosphor materials play a crucial role in the creation of white light from blue and near-UV solid-state light-emitting diodes. Understanding the intricacies of the phosphor structure is key for setting the stage for improved, more efficient functionality. Average structure and coordination environment analysis of the robust and efficient green-emitting phosphor, β-SiAlON:Eu 2+ (β-Si 6–z Al z O z N 8–z Eu 0.009 ), is combined here with a range of property measurements to elucidate the role of Al content ( z ) in luminescence properties, including the red shift of emission and the thermal quenching of luminescence as a function of increasing Al content z . Average structure techniques reveal changes in polyhedral distortion with increasing z for the 9-coordinate Eu site in β-SiAlON:Eu 2+ . X-ray absorption near edge structure (XANES) is used to confirm that the majority of the activator Eu is in the Eu 2+ state, exhibiting the symmetry-allowed and efficient 4f 7 5d 0 → 4f 6 5d 1 transitions. As a result, room temperature and temperature-dependent luminescence indicate a curious increase in thermal stability with increasing z over a small range due to an increasing barrier for thermal ionization, which is correlated to an increase in the quantum yield of the phosphor.

36 MATERIALS SCIENCE↗

Lambda-Nucleon Potential Calculated from Lattice QCD

We present our studies of Lambda-Nucleon ({Lambda}N) interaction by using lattice QCD. The equal-time Nambu-Bethe-Salpeter (NBS) amplitude of the lowest energy scattering state of a proton-{Lambda} system is calculated from lattice QCD. In this report, two different types of gauge configurations are employed: (i) Quenched QCD configurations at {beta} = 5.7 (a = 0.1416(9) fm) on a 32{sup 3}x48 lattice, whose spatial volume is (4.5 fm){sup 3}.(ii)2+1 flavor full QCD configurations generated by the PACS-CS collaboration at {beta} = 1.9 (a = 0.0907(13) fm) on a 32{sup 3}x64 lattice, whose spatial volume is (2.90 fm){sup 3}. The spin-singlet central potential is calculated from the NBS wave function for the spin J = 0 state, whereas the spin-triplet central potential as well as the tensor potential are deduced simultaneously from the NBS wave function for the spin J = 1 state by dividing it into the S-wave and the D-wave components.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Correlation of structure and ion conduction in La{sub 2−x}Y{sub x}Mo{sub 2}O{sub 9} (0 ≤ x ≤ 0.2) oxygen ion conductors

Correlation of structure and ion conduction of La{sub 2−x}Y{sub x}Mo{sub 2}O{sub 9} (0 ≤ x ≤ 0.2) has been investigated. The cubic symmetry with space group P2{sub 1}3 and other structural parameters are obtained from Rietveld refinement of X-ray diffraction patterns of Y doped samples. The average lanthanum-oxygen and molybdenum-oxygen distances are obtained from the electron density contour plot. The transmission electron microscopic study confirms the cubic nature of the samples and also provides an estimate of thickness of the grain boundary. The scanning transmission electron microscope energy dispersive spectrometer mapping confirms the different orientations of grains. The composition dependence of the ionic conductivity has been correlated with that of O2 and O3 site occupancies in the [O1La{sub 3}Mo] antitetrahedral unit. The different vibrational modes in the low frequency region due to vibration of Mo-O bands are confirmed from the analysis of FTIR and Raman spectra. The full widths at half maximum of most of the Mo-O bands are found to be independent of Y doping. Additionally, the shifts in the position of Raman bands are correlated with unit cell parameter using Grüneisen constant.

36 MATERIALS SCIENCE↗

Controlling the exciton energy of a nanowire quantum dot by strain fields

We present an experimental route to engineer the exciton energies of single quantum dots in nanowires. By integrating the nanowires onto a piezoelectric crystal, we controllably apply strain fields to the nanowire quantum dots. Consequently, the exciton energy of a single quantum dot in the nanowire is shifted by several meVs without degrading its optical intensity and single-photon purity. Second-order autocorrelation measurements are performed at different strain fields on the same nanowire quantum dot. The suppressed multi-photon events at zero time delay clearly verify that the quantum nature of single-photon emission is well preserved under external strain fields. The work presented here could facilitate on-chip optical quantum information processing with the nanowire based single photon emitters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical spectra in the condensed phase: Capturing anharmonic and vibronic features using dynamic and static approaches

Simulating optical spectra in the condensed phase remains a challenge for theory due to the need to capture spectral signatures arising from anharmonicity and dynamical effects, such as vibronic progressions and their induced asymmetry. As such, numerous simulation methods have been developed that invoke different approximations and vary in their ability to capture different physical regimes. In this work, we use several models of chromophores in the condensed phase and ab initio molecular dynamics simulations to rigorously assess the applicability of methods to simulate optical absorption spectra. Specifically, we focus on the ensemble scheme, which can address anharmonic potential energy surfaces but relies on the applicability of extreme nuclear-electronic timescale separation; the Franck-Condon method, which includes dynamical effects but only at the harmonic level; as well as the recently introduced ensemble zero-temperature Franck-Condon approach, which straddles these limits. We also devote particular attention to the performance of methods derived from a cumulant expansion of the energy gap fluctuations and test the ability to approximate the requisite time correlation functions using classical dynamics with quantum correction factors. These results provide insights as to when these methods are applicable and able to capture the features of condensed phase spectra qualitatively and, in some cases, quantitatively across a range of regimes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alignment of morphology during high spatial frequency periodic structure formation in GaAs

The interaction among multiple intense ultrashort laser pulses and solids is known to provide a regular nanoscale surface corrugation. A coupled mechanism has been identified that operates in a specific range of fluences in GaAs that exhibits transient loss of the imaginary part of the dielectric function and Χ 2 , which produces a unique corrugation known as high spatial frequency laser induced periodic surface structures (HSFL). The final structures have 180 nm periods, and their alignment perpendicular to the laser polarization is first observed in an intermediate morphology with correlation distances of 150±40 nm. Quantum molecular dynamics simulations suggest that HSFL self-assembly is initiated when the intense laser field softens the interatomic binding potential, which leads to an ultrafast generation of point defects. The morphological evolution begins as self-interstitial diffusion, driven by stress relaxation, to the surface producing 1–2 nm tall islands. An ab initio calculation of excited electron concentration combined with a Drude-Lorentz model of the excited GaAs dielectric function is used to determine that the conditions for SPP coupling at HSFL formation fluences are both satisfied and occur at wavelengths that are imprinted into the observed surface morphologies. The evolution of these morphologies is reported on as the interplay between surface plasmon polaritons that localize defect generation within the structures present on the previous laser exposure and stress relaxation driven defect diffusion.

36 MATERIALS SCIENCE↗

Fermi surface reconstruction in electron-doped cuprates without antiferromagnetic long-range order

Fermi surface (FS) topology is a fundamental property of metals and superconductors. In electron-doped cuprate Nd 2- x Ce x CuO 4 (NCCO), an unexpected FS reconstruction has been studied in optimal- and overdoped regime ( x = 0.15-0.17) by quantum oscillation measurements (QOM). This is all the more puzzling because neutron scattering suggests that the antiferromagnetic (AFM) long-range order, which is believed to reconstruct the FS, vanishes before x = 0.14. To reconcile the conflict, a widely discussed external magnetic-field–induced AFM long-range order in QOM explains the FS reconstruction as an extrinsic property. Here, we report angle-resolved photoemission (ARPES) evidence of FS reconstruction in optimal- and overdoped NCCO. The observed FSs are in quantitative agreement with QOM, suggesting an intrinsic FS reconstruction without field. This reconstructed FS, despite its importance as a basis to understand electron-doped cuprates, cannot be explained under the traditional scheme. Moreover, the energy gap of the reconstruction decreases rapidly near x = 0.17 like an order parameter, echoing the quantum critical doping in transport. The totality of the data points to a mysterious order between x = 0.14 and 0.17, whose appearance favors the FS reconstruction and disappearance defines the quantum critical doping. A recent topological proposal presents an ansatz for its origin.

36 MATERIALS SCIENCE↗

Magnetic field-induced Fermi surface reconstruction and quantum criticality in CeRhIn 5

Here, we present detailed results of the field evolution of the de Haas–van Alphen (dHvA) effect in CeRhIn 5 . A magnetic field-induced reconstruction of the Fermi surface is clearly shown to occur inside the antiferromagnetic state, in an applied field of around B* ≃ 30 T, which is evidenced by the appearance of several new dHvA branches. The angular dependence of the dHvA frequencies reveals that the Fermi surfaces of CeRhIn 5 at B > B* and CeCoIn 5 are similar. The results suggest that the Ce-4f electrons in become itinerant at B > B* due to the Kondo effect, prior to the field-induced quantum critical point (QCP) at B c0 ≃ 50 T. The electronic states at the field-induced QCP are therefore different from that of the pressure-induced QCP where a dramatic Fermi surface reconstruction occurs exactly at the critical pressure, indicating that multiple types of QCP may exist in CeRhIn 5 .

36 MATERIALS SCIENCE↗

Excited-state potentials for modelling dense plasmas from first principles

The modelling of dense plasmas using finite-temperature density functional theory has proven very successful in determining transport properties and the equation of state of systems where quantum many-body effects and correlations play a key role in their structure. Here we show how excited-state projector augmented- wave potentials can be used to extend these calculations to explicitly model core-hole states, allowing for the calculation of the electronic structure of a range of integer charge configurations embedded in a dense plasma environment. Our excited-state potentials show good agreement with all-electron calculations at finite-temperatures, motivating their use as an efficient approach in modelling from first principles both the structure of strongly-coupled non-equilibrium plasmas and their interaction with intense X-rays.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗