Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMORPHIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Study of the electronic properties of hydrogenated amorphous silicon films by femtosecond spectroscopy

Experimental results on the electron relaxation time and diffusion coefficient in hydrogenated amorphous silicon films that exhibit intrinsic and electronic conductivity at room temperature are reported. It is found that, for these two types of films, the relaxation times are 1 ns and 465 ps and the diffusion coefficients are 0.54 and 0.83 cm{sup 2} s{sup -1}. It is established that, as the pulse intensity is increased, the decay time of the induced-grating signal shortens.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Silicon nanoclusters ncl-Si in a hydrogenated amorphous silicon suboxide matrix a-SiO{sup x}:H (0 < x < 2)

Published data concerning plasma methods of the fabrication and study of silicon nanoclusters ncl-Si in crystalline (c-SiO{sup 2}) and amorphous (a-SiO{sup x}:H) matrices are reviewed. The effect of radio-fre- quency (RF) and direct-current (dc) discharge modulation on the growth kinetics of ncl-Si is considered. The results of infrared spectroscopy, mass spectrometry, and laser-beam scanning of the plasma composition are analyzed. The behavior of nanoparticles is described depending on their charge and size in plasma under the effect of electric, magnetic, and gravity forces and under the influence of the dynamics of gases contained within the plasma. Infrared spectroscopy data on the a-SiO{sup x}:H film matrix are analyzed. The photoluminescence properties of ncl-Si fabricated using different techniques are described.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Formation of carbon nanotubes on an amorphous Ni{sub 25}Ta{sub 58}N{sub 17} alloy film by chemical vapor deposition

It is shown that it is possible to grow carbon nanotubes on the surface of an amorphous Ni–Ta–N metal alloy film with a low Ni content (~25 at %) by chemical deposition from acetylene at temperature 400–800°C. It is established that the addition of nitrogen into the Ni–Ta alloy composition is favorable for the formation of tantalum nitride and the expulsion of Ni clusters, which act as a catalyst of the growth of carbon nanotubes, onto the surface. From Raman spectroscopy studies, it is found that, as the temperature of synthesis is raised, the quality of nanotubes is improved.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Crystallization of Amorphous Germanium Films and Multilayer a-Ge/a-Si Structures upon Exposure to Nanosecond Laser Radiation

The processes of the crystallization of amorphous germanium films and multilayer germanium/silicon structures upon exposure to nanosecond (70 ns) ruby laser radiation (λ = 694 nm) are studied. The samples are grown on silicon and glassy substrates by plasma-enhanced chemical vapor deposition. Pulsed laser annealing of the samples is conducted in the range of pulse energy densities E{sub p} from 0.07 to 0.8 J cm{sup –2}. The structure of the films after annealing is determined by analyzing the scanning electron microscopy data and Raman spectra. It is established that, after annealing, the films are completely crystallized and, in this case, contain regions of coarse crystalline grains (>100 nm), whose fraction increases, as E{sub p} is increased, and reaches 40% of the area. From analysis of the position of the Raman peaks, it is conceived that the crystalline grains, whose dimensions exceed 100 nm, either contain structural defects or stretching strains. The correlation length of optical vibrations is determined from the phonon confinement model and found to increase from 5 to 8 nm, as E{sub p} is increased. Pulsed laser annealing of multilayer Ge(10 nm)/Si(5 nm) structures induces partial intermixing of the layers with the formation of Ge–Si alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Influence of Current Annealing on the Temperature Dependences of Magnetoimpedance in Amorphous Microwires

Further miniaturization of magnetic electron devices and devices of microsystem engineering in many ways depends on the optimal choice of functional materials (media) used in working bodies, specifically, sensory elements (for example, in local magnetic field sensors, mechanical stress/strain sensors, temperature sensors, etc.). Among promising materials in this respect are ferromagnetic wires consisting of a glass-coated amorphous alloy filament. The magnetoimpedance of such filaments turns out to be highly sensitive to the above external factors: the so-called giant magnetoimpedance effect. The performance of these devices is highly temperature stable, which is important for many applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Synthesis of Highly Oriented Zinc-Oxide Films on Amorphous Substrates by the Method of Direct-Current Magnetron Sputtering

We describe the technology of obtaining highly oriented zinc-oxide (ZnO) films on amorphous substrates at high growth rates (up to 7 nm/s) by means of direct-current magnetron sputtering. It is suggested to optimize the substrate position with respect to magnetron and consider the floating potential to which the substrate is charged in magnetron discharge plasma as one of the main technological parameters. Electrondiffraction study of the structural characteristics of the obtained ZnO films showed that increase in the substrate temperature was accompanied by transformation of the crystallite shape from platelike to columnar.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Investigation of the electrical conduction mechanisms in P-type amorphous germanium electrical contacts for germanium detectors in searching for rare-event physics

For the first time, electrical conduction mechanisms in the disordered material system is experimentally studied for p-type amorphous germanium (a-Ge) used for high-purity Ge detector contacts. The localization length and the hopping parameters in a-Ge are determined using the surface leakage current measured from three high-purity planar Ge detectors. The temperature dependent hopping distance and hopping energy are obtained for a-Ge fabricated as the electrical contact materials for high-purity Ge planar detectors. As a result, we find that the hopping energy in a-Ge increases as temperature increases while the hopping distance in a-Ge decreases as temperature increases. The localization length of a-Ge is on the order of 2.13$^{-0.05}_{+0.07}$A° to 5.07$^{0.83}_{+2.58}$A°,depending on the density of states near the Fermi energy level within bandgap. Using these parameters, we predict that the surface leakage current from a Ge detector with a-Ge contacts can be much smaller than one yocto amp (yA) at helium temperature, suitable for rare-event physics searches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

The impact of the charge barrier height on Germanium (Ge) detectors with amorphous-Ge contacts for light dark matter searches

Germanium (Ge) detectors with ability of measuring a single electron–hole (e–h) pair are needed in searching for light dark matter (LDM) down to the MeV scale. We investigate the feasibility of Ge detectors with amorphous-Ge (a-Ge) contacts to achieve the sensitivity of measuring a single e-h pair, which requires extremely low leakage current. Three Ge detectors with a-Ge contacts are used to study the charge barrier height for blocking electrons and holes. Using the measured bulk leakage current and the Döhler–Brodsky model, we obtain the values for charge barrier height and the density of localized energy states near the Fermi energy level for the top and bottom contacts, respectively. We predict that the bulk leakage current is extremely small and can be neglected at helium temperature ( $$\sim $$ ~ 4 K). Thus, Ge detectors with a-Ge contacts possess the potential to measure a single e–h pair for detecting LDM particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Lithium Vanadium Oxide (Li 1.1 V 3 O 8 ) Coated with Amorphous Lithium Phosphorous Oxynitride (LiPON): Role of Material Morphology and Interfacial Structure on Resulting Electrochemistry

In the present work, lithium vanadium oxide (Li 1.1 V 3 O 8 ) particles synthesized at two different temperatures were coated with an amorphous lithium phosphorous oxynitride (LiPON) film for the first time, and the effects of the LiPON coating on the electrochemistry of the Li 1.1 V 3 O 8 materials with different morphologies were systematically investigated by comparing uncoated Li 1.1 V 3 O 8 and Li 1.1 V 3 O 8 coated with LiPON of various thicknesses. Galvanostatic discharge-charge cycling revealed increased functional capacity for the LiPON-coated materials. Post-cycling electrochemical impedance spectroscopy showed that LiPON-coated Li 1.1 V 3 O 8 materials developed less interfacial resistance with extended cycling, rationalized by vanadium migration into the LiPON coating seen by electron energy loss spectra. Post-mortem quantitative analysis of the anodes revealed more severe vanadium dissolution for the more irregularly shaped Li 1.1 V 3 O 8 materials with less LiPON coverage. Thus, this study highlights the specific benefits and limitations of LiPON coatings for stabilizing a moderate voltage Li 1.1 V 3 O 8 cathode material under extended cycling in liquid electrolyte, and describes a generally applicable approach for comprehensive characterization of a composite electroactive material which can be used to understand interfacial transport properties in other functional systems.

25 ENERGY STORAGE↗
DOE OSTI2025

Amorphous boron nitride: synthesis, properties and device application

Amorphous boron nitride (a-BN) exhibits remarkable electrical, optical, and chemical properties, alongside robust mechanical stability, making it a compelling material for advanced applications in nanoelectronics and photonics. This review comprehensively examines the unique characteristics of a-BN, emphasizing its electrical and optical attributes, state-of-the-art synthesis techniques, and device applications. Key advancements in low-temperature growth methods for a-BN are highlighted, offering insights into their potential for integration into scalable, CMOS-compatible platforms. Additionally, the review discusses the emerging role of a-BN as a dielectric material in electronic and photonic devices, serving as substrates, encapsulation layers, and gate insulators. Finally, perspectives on future challenges, including defect control, interface engineering, and scalability, are presented, providing a roadmap for realizing the full potential of a-BN in next-generation device technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2016

HRTEM low dose: the unfold of the morphed graphene, from amorphous carbon to morphed graphenes

We present experimental evidence under low-dose conditions transmission electron microscopy for the unfolding of the evolving changes in carbon soot during mechanical milling. The milled soot shows evolving changes as a function of the milling severity or time. Those changes are responsible for the transformation from amorphous carbon to graphenes, graphitic carbon, and highly ordered structures such as morphed graphenes, namely Rh6 and Rh6-II. The morphed graphenes are corrugated layers of carbon with cross-linked covalently nature and sp2 - or sp3 -type allotropes. Electron microscopy and numerical simulations are excellent complementary tools to identify those phases. Furthermore, the TEAM 05 microscope is an outstanding tool to resolve the microstructure and prevent any damage to the sample. Other characterization techniques such as XRD, Raman, and XPS fade to convey a true identification of those phases because the samples are usually blends or mixes of the mentioned phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Amorphous silicon carbide high contrast gratings as highly efficient spectrally selective visible reflectors

We report spectrally selective visible wavelength reflectors using hydrogenated amorphous silicon carbide (a-SiC:H) as a high index contrast material. Beyond 610nm and through the near infrared spectrum, a-SiC:H exhibits very low loss and exhibits an wavelength averaged index of refraction of n = 3.1. Here we design, fabricate, and characterize such visible reflectors using a hexagonal array of a-SiC:H nanopillars as wavelength-selective mirrors with a stop-band of approximately 40 nm full-width at half maximum. The fabricated high contrast grating exhibits reflectivity R >94% at a resonance wavelength of 642nm with a single layer of a-SiC:H nanopillars. The resonance wavelength is tunable by adjusting the geometrical parameters of the a-SiC:H nanopillar array, and we observe a stop-band spectral center shift from 635 nm up to 642 nm. High contrast gratings formed from a-SiC:H nanopillars are a promising platform for various visible wavelength nanophotonics applications.

Bauser, Haley C.↗
DOE OSTI2017

In vitro effect of amorphous calcium phosphate paste applied for extended periods of time on enamel remineralization

Dental applications based on the unique characteristics of amorphous calcium phosphate stabilized by casein phosphopeptides (CPP-ACP) have been proposed, as well as the improvement of its properties. The objective of this study was to determine the ability of topically applied CPP-ACP from a commercial product to remineralize subsurface lesions when applied for extended periods of time (3 h and 8 h). Artificially induced carious lesions were produced in 50 bovine enamel blocks previously selected by surface hardness. After treatments with gel without F and CPP-ACP applied for 1 minute (Placebo); 2% NaF neutral gel applied for 1 minute (Fluoride 1 min); CPP-ACP applied for 3 min (ACP 3 min); and CPP-ACP applied for 3 h (ACP 3 h) and for 8 h (ACP 8 h), the enamel blocks were submitted to the remineralization pH-cycling. Surface hardness and synchrotron micro-tomography were used to determine the percentage of surface hardness recovery (%SHR) and to calculate mineral concentration (g HAp .cm -3 ), respectively. The data were submitted to ANOVA followed by the Student-Newman-Keuls test (p<0.05). Fluoride gel presented higher %SHR followed by ACP 3 min (p<0.001). No difference (p = 0.148) was found for Placebo, ACP 3 h and ACP 8 h groups for %SHR. Fluoride gel showed greater mineral concentration (p<0.001) when compared with the other groups. ACP 3 min demonstrated a significant difference (p<0.001) from ACP 3 h and ACP 8 h. The ACP 3 h and 8 h presented a subsurface lesion with development of laminations in all blocks. In this in vitro study the use of CPP-ACP for extended periods of time did not produce an additive effect in the remineralization process.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Alginate–Amorphous Calcium Carbonate Hydrogels for Controlled Therapeutic Release

Alginate hydrogels are widely explored as biocompatible matrices for transdermal delivery of therapeutic compounds but burst release and mechanical stability remain persistent challenges in drug delivery systems. This experimental study investigated alginate–amorphous calcium carbonate (ACC) hydrogel composites designed to regulate release of model anti-inflammatory compound, ibuprofen. Hydrogels containing 1.6–2.0 wt% sodium alginate were crosslinked with CaCl₂ and combined with ACC through two incorporation pathways: (i) separate addition of ACC and ibuprofen or (ii) co-precipitation of ACC onto ibuprofen prior to hydrogel incorporation. Hydrogels without ACC served as Control. Biocomposite structure and properties were characterized and release profiles quantified using Korsmeyer–Peppas (KP) model.Burst release was curbed as crosslinking time increased, highlighting importance of network density in diffusion control. Co-precipitating ACC with ibuprofen prior to incorporating into the hydrogel suppressed burst release and sustained release for > ~72 h. Rheological measurements indicate ACC reinforces hydrogel network, increasing storage modulus while maintaining hydration and flexibility. KP model indicates release is diffusion-controlled, with deviations reflecting contributions from diffusion barriers and morphologic/structural changes near the ACC coated ibuprofen. ACC within alginate hydrogels provides a strategy for tuning drug release while preserving mechanical properties relevant to transdermal applications.

36 MATERIALS SCIENCE↗
DOE OSTI2012

New Approaches for Passivation of Crystalline and Amorphous Silicon (CRADA Final Report)

New approaches of passivating crystalline, multicrystalline, and amorphous silicon will be explored. These will include the use of aqueous solution of KCN and a proprietary composition formulated by Mallinckrodt Baker, Inc. The surface passivation will be compared with that provided by an iodine-ethanol solution, and bulk passivation will be compared with that of H-passivation obtained by siliconnitride, in a fire-through process.

14 SOLAR ENERGY↗
DOE OSTI2013

Electron Cloud in Steel Beam Pipe vs Titanium Nitride Coated and Amorphous Carbon Coated Beam Pipes in Fermilab's Main Injector

This paper documents the use of four retarding field analyzers (RFAs) to measure electron cloud signals created in Fermilab’s Main Injector during 120 GeV operations. The first data set was taken from September 11, 2009 to July 4, 2010. This data set is used to compare two different types of beam pipe that were installed in the accelerator. Two RFAs were installed in a normal steel beam pipe like the rest of the Main Injector while another two were installed in a one meter section of beam pipe that was coated on the inside with titanium nitride (TiN). A second data run started on August 23, 2010 and ended on January 10, 2011 when Main Injector beam intensities were reduced thus eliminating the electron cloud. This second run uses the same RFA setup but the TiN coated beam pipe was replaced by a one meter section coated with amorphous carbon (aC). This section of beam pipe was provided by CERN in an effort to better understand how an aC coating will perform over time in an accelerator. The research consists of three basic parts: (a) continuously monitoring the conditioning of the three different types of beam pipe over both time and absorbed electrons (b) measurement of the characteristics of the surrounding magnetic fields in the Main Injector in order to better relate actual data observed in the Main Injector with that of simulations (c) measurement of the energy spectrum of the electron cloud signals using retarding field analyzers in all three types of beam pipe.

Backfish, Michael↗
DOE OSTI2015

Characterization and Modeling of Amorphous Metallic Cores

Los Alamos is planning a new compact multi-pulsed electron linear induction accelerator (LIA) for flash radiography of explosively driven hydrodynamic experiments, the Advanced Radiography Induction Accelerator (ARIA). In order to operate in multi-pulse mode without the need to reset the inductor cores between each pulse, the design incorporates amorphous metallic glass cores. Due to their high magnetic saturation value, these provide enough volt-seconds for sequential pulsing before reaching saturation. Although metallic glass cores are used extensively, their behavior depends greatly on the particular formulation and on the specific application. For this reason, we have undertaken an effort to better characterize the cores under consideration and use this data to develop models that can be used in EM simulations. We present the characterization of two types of cores being consid- ered: Metglas 2605CO and 2605HB1M cores. We include detailed measurements of BH curves at various magneti- zation rates, measurements of multiple pulses on the same core, and initial modeling efforts.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Surface Oxidation Behavior of FeNi-based Metal Amorphous Nanocomposite (MANC) Alloys for High-Speed Motor Applications

New interest in high performance soft magnetic materials (SMMs) have been fueled by the need to lower losses at higher operating frequencies while maintaining high flux density and tunable permeability in electrical motors, transformer, and generator applications. Conventional SMMs like electrical steels and Fe-based metal amorphous nanocomposite (MANC) alloys are dominated by eddy current losses at high frequencies. Recent breakthrough in high-performance FeNi MANC have shown promise in reducing eddy current losses as compared to electrical steels. Their intrinsic adherent native surface oxide layer provides sufficient electrical insulation to reduce interlaminate eddy current losses. However, notwithstanding advances in MANCs, there exists a gap in literature on investigations of the surface oxide layer responsible for significant reduction of interlaminate eddy current losses in magnetic cores. This work presents a detailed characterization of the surface oxide, oxidation behavior, and relationship between oxide thickness and resistivity of a new FeNi MANC alloy (Fe70Ni30)80Nb4B14Si2.

Egbu, James↗