Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “static models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

External field effects on solidification - Macroscopic and microscopic models

Comparison of theoretical effects of magnetic and gravitational fields on melts of metals and semiconductors provides two kinds of insight into space processing materials problems. First, the task of comparing effects of the two fields yields mathematical models which may be used to estimate material properties and responses to processing under various field conditions. Then, by using these models, microgravity effects can be inferred from magnetic field data already obtained in laboratories on earth. Magnetohydrodynamics (static and oscillating fields) and the Free Volume Model are used to study macroscopic effects, and Sekerka's interface stability theory is used to show how external fields can affect microsegregation. It is demonstrated that the mathematical formalism is essentially the same for describing macroscopic effects of both microgravity and magnetic fields.

Miller, R. I.↗
NASA NTRS1995

The settling of warped disks in oblate dark halos

When a galaxy forms, the disk may initially be tilted with respect to a flattened dark halo. The misalignment between the disk and the halo is a common explanation for galactic disk warps, since in this state disks have precessing bending modes which resemble real warps. The gravitational response of the halo has often been ignored, and its strength and effect on possible bending modes is unknown. We therefore calculate the response of an oblate halo to a precessing inclined exponential disk using a variety of techniques. We construct models with a rigid exponential disk precessing in a particle halo, a particle disk precessing inside a static bulge/halo potential, and a self-consistent model with a particle disk, bulge, and halo. When the disk: halo mass ratio is small (approximately 10%) within 5 exponential scale radii, the disk settles to the equatorial plane of the halo within five orbital times. When the disk and halo mass are comparable, the halo rapidly aligns with the disk within a few orbital times, while the disk inclination drops. The rapid response of the halo to an inclined precessing disk suggests that the warps seen in galactic disks are not due to a misalignment between the disk and the inner halo. If a galaxy forms inclined to the principal plane of a dark halo, either the disk will settle to a pricipal plane or the inner halo will twist to align with the disk. The outer halo will remain misaligned for a much longer time and therefore may still exert a torque. Warped bending modes may still exist if the misalignment of the outer halo persists for a Hubble time.

Dubinski, John↗
DOE OSTI2020

Mechanical Modeling and Testing of Pouch Cells under Various Loading Conditions

Understanding the mechanical behaviors of batteries is critical to improve battery safety since mechanical failure may directly lead to short-circuits. Nevertheless, mechanical modeling of batteries is challenging since a cell usually contains multiple thin layers with drastically different material properties, and they exhibit different responses under different loading conditions. In this work, we developed a mechanical model for a large-format pouch cell, where the cell is represented by thick shell elements that are not only computationally efficient but also account for different thickness and material properties of individual components. Moreover, the mechanical properties of active materials in electrodes are described by a continuous surface cap model that can capture both compaction and shear deformation modes and can include strain rate effect and damage. Furthermore, to evaluate the model capabilities, we conducted abuse tests under various loading conditions (quasi-static compression, shear and impact). It is shown that the model prediction of load-displacement relationship and failure condition agree with experimental results, which demonstrates that the developed model can capture the mechanical behaviors of a cell in different abuse events. Details of element formulation, material parameters evaluation and test setup are presented. Capabilities, limitations and future directions of model development are also discussed.

25 ENERGY STORAGE↗
NASA NTRS1974

Development and correlation: Viking Orbiter analytical dynamic model with modal test

The Viking Orbiter (VO) experience in the achievement of a mathematical model is described along with the following project activities: (1) the generation of the overall plan for load analysis, an analytical dynamic model, and development tests; (2) the performance of VO subsystem static and modal tests; and (3) the correlation of the VO system model analysis and test. Success is attributed to the coordination of analysis and test using substructure modal coupling techniques.

Wada, B. K.↗
NASA NTRS2005

A Comparison of Geographic Information Systems, Complex Networks, and Other Models for Analyzing Transportation Network Topologies

This report reviews six classes of models that are used for studying transportation network topologies. The report is motivated by two main questions. First, what can the "new science" of complex networks (scale-free, small-world networks) contribute to our understanding of transport network structure, compared to more traditional methods? Second, how can geographic information systems (GIS) contribute to studying transport networks? The report defines terms that can be used to classify different kinds of models by their function, composition, mechanism, spatial and temporal dimensions, certainty, linearity, and resolution. Six broad classes of models for analyzing transport network topologies are then explored: GIS; static graph theory; complex networks; mathematical programming; simulation; and agent-based modeling. Each class of models is defined and classified according to the attributes introduced earlier. The paper identifies some typical types of research questions about network structure that have been addressed by each class of model in the literature.

Alexandrov, Natalia↗
DOE OSTI2025

Modeling diffusion and depletion in high-aspect-ratio atomic layer deposition processes: Process parameters and manufacturing impacts

Atomic layer deposition (ALD) is a powerful technique for modifying the surface chemistry and properties of substrates with complex and nonplanar topologies. However, achieving uniform and conformal deposition on ultrahigh-aspect-ratio substrates remains challenging, typically requiring large quantities of precursors and long exposure times. Furthermore, process optimization is often performed empirically and involves substantial trial and error. In this work, we perform a combined experimental and computational study of ALD Al 2 O 3 infiltration into silica aerogel monoliths (aspect ratio >10 5 ). A reaction-diffusion model is used to explore the effects of key processing parameters, namely, exposure time per dose, precursor source temperature, number of aerogels in the reactor, and reactor volume. The model is based on quasi-static mode ALD, where the dosed precursor is held in the chamber for a fixed period of time before purging. We analyze the trade-offs between process throughput and precursor utilization for each of these parameters. Furthermore, we investigate the co-optimization and interactions between multiple process parameters, demonstrating the potential for further improvements. Furthermore, this physics-based model can be used to identify a set of process parameters for high-aspect-ratio ALD that meet specific manufacturing objective functions, including throughput, cost, and sustainability.

Aerogel↗
DOE OSTI2021

A quantitative assessment of the model form error of friction models across different interface representations for jointed structures

Hysteretic models are widely used to model frictional interactions in joints to recreate experimental behavior. However, it is unclear which models are best suited for fitting or predicting the responses of structures. Here, the present study evaluates 26 friction model/interface representation combinations to quantify the model form error. A Quasi-Static Modal Analysis approach (termed Rayleigh Quotient Nonlinear Modal Analysis) is adopted to calculate the nonlinear system response, and a Multi-Objective Optimization is solved to fit experimental data of the first mode of the Brake-Reuß Beam. Optimized parameters from the first mode are applied to the second and third bending modes to quantify the predictive ability of the models. Formulations for both tracing full hysteresis loops and recreating hysteresis loops from a single loading curve (Masing assumptions) are considered. Smoothly varying models applied to a five patch representation showed the highest flexibility (for fitting mode 1) and good predictive potential (for modes 2 and 3). For a second formulation, which uses 152 frictional elements to represent the interface, the physically motivated spring in series with a Coulomb slip model (elastic dry friction) has high error for fitting mode 1 and performs near the middle for predicting higher modes. For both interface representation, the best fit models are not the most physical, but rather the ones with the most parameters (as expected); however, the more physical models perform somewhat better for predicting the higher modes.

42 ENGINEERING↗
NASA NTRS2018

A Generic T-Tail Transport Airplane Simulation for High-Angle-Of-Attack Dynamics Modeling Investigations

A preliminary simulation of a generic T-tail transport airplane configuration has been developed at the National Aeronautics and Space Administration Langley Research Center. The primary purpose of this piloted simulation is to assess aerodynamic model fidelity requirements for training airline pilots to recognize and recover from full-stall flight conditions in a T-tail airplane. As a result, significant flexibility has been designed into the flight dynamics model. The flight dynamics model is based on newly acquired static and dynamic stability and control data from sources that include: wind tunnel, water tunnel, and computational fluid dynamics. Preliminary results for initial stall show an unstable stall pitch break (if the stick pusher is inhibited), un-commanded motions due to stall asymmetries, significantly reduced dynamic roll stability, and decreased control effectiveness. Preliminary studies indicated an insensitivity to the fidelity of the pitch damping model.

Cunningham, Kevin↗
DOE OSTI2015

A representative-sandwich model for simultaneously coupled mechanical-electrical-thermal simulation of a lithium-ion cell under quasi-static indentation tests

The safety behavior of lithium-ion batteries under external mechanical crush is a critical concern, especially during large scale deployment. We previously presented a sequentially coupled mechanical-electrical-thermal modeling approach for studying mechanical abuse induced short circuit. Here in this work, we study different mechanical test conditions and examine the interaction between mechanical failure and electrical-thermal responses, by developing a simultaneous coupled mechanical-electrical-thermal model. The present work utilizes a single representative-sandwich (RS) to model the full pouch cell with explicit representations for each individual component such as the active material, current collector, separator, etc. Anisotropic constitutive material models are presented to describe the mechanical properties of active materials and separator. The model predicts accurately the force-strain response and fracture of battery structure, simulates the local failure of separator layer, and captures the onset of short circuit for lithium-ion battery cell under sphere indentation tests with three different diameters. Electrical-thermal responses to the three different indentation tests are elaborated and discussed. Lastly, numerical studies are presented to show the potential impact of test conditions on the electrical-thermal behavior of the cell after the occurrence of short circuit.

25 ENERGY STORAGE↗
NASA NTRS1972

Effects of wing-pivot location and forewing configuration on the low-speed aerodynamic characteristics of a variable-sweep airplane model

An investigation has been made to determine the effects of the location of the wing pivot and geometry of the forewing on the static longitudinal aerodynamic characteristics at subsonic speeds of a model representing a variable-sweep supersonic fighter airplane. Results indicate that as the wing-pivot location moves aft and outboard, the change in static margin due to wing sweep is reduced. Increasing the forewing area resulted in a forward shift of the aerodynamic center as well as a slight reduction in the aerodynamic-center variation due to wing sweep.

Huffman, J. K.↗
DOE OSTI2014

Characterization of local heat fluxes around ICRF antennas on JET

When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced power deposition on Plasma-Facing Components (PFCs) close to the antennas can occur. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat fluxes on the protection of the JET ICRF antennas, using Infra-Red (IR) thermography measurement. The measured heat flux patterns along the poloidal limiters surrounding powered antennas were compared to predictions from a simple RF sheath rectification model. The RF electric field, parallel to the static magnetic field in front of the antenna, was evaluated using the TOPICA code, integrating a 3D flattened model of the JET A2 antennas. The poloidal density variation in front of the limiters was obtained from the mapping of the Li-beam or edge reflectometry measurements using the flux surface geometry provided by EFIT equilibrium reconstruction. In many cases, this simple model can well explain the position of the maximum heat flux on the different protection limiters and the heat-flux magnitude, confirming that the parallel RF electric field and the electron plasma density in front of the antenna are the main driving parameters for ICRF-induced local heat fluxes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1990

Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading

The development of a general mathematical model and solution methodologies for analyzing structural response of thin, metallic shell-like structures under dynamic and/or static thermomechanical loads is examined. In the mathematical model, geometric as well as material-type of nonlinearities are considered. Traditional as well as novel approaches are reported and detailed applications are presented in the appendices. The emphasis for the mathematical model, the related solution schemes, and the applications, is on thermal viscoelastic and viscoplastic phenomena, which can predict creep and ratchetting.

Simitses, George J.↗
NASA NTRSDate not supplied

Prediction of High-Latitude Ionospheric Electrodynamics Using the Machine Learning Based Auroral Ionospheric Electrodynamics Model

We introduce a new framework for Machine-Learning (ML) based Auroral Ionosphere Model (ML-AIM). ML-AIM solves a current continuity equation by utilizing the ML model of Field Aligned Currents (FACs) of Kunduri et al., 2020 (https://doi.org/10.1029/2020JA027908), the FAC-derived aurora conductance model of Robinson et al., 2020 (https://doi.org/10.1029/2020JA028008), and the solar irradiance conductance model of Moen & Brekke (1993). The ML-AIM inputs are 60min time histories of solar wind plasma, interplanetary magnetic fields (IMF), and geomagnetic indices, and its outputs are ionospheric electric potential, electric fields, Pederson/Hall currents, and Joule Heating. We conduct two ML-AIM simulations for a weak geomagnetic activity on 14 May 2013 and a geomagnetic storm on 7-8 September 2017. ML-AIM produces reasonable ionospheric potential patterns such as two cell convection patterns and the enhancement of electric potentials during active times. The cross polar cap potential drop from ML-AIM is also comparable to the ones from the Weimer 2005 model, Super Dual Auroral Radar Network (SuperDARN), and Defense Meteorological Satellite Program (DMSP) F17 observations. ML-AIM is unique in a sense that it predicts ionospheric responses to the time-varying solar wind and geomagnetic conditions, while other traditional empirical model like Weimer 2005 is designed to provide static ionospheric conditions under steady solar wind/IMF conditions. In future, ML-AIM will include ML-based models of aurora precipitation and ionospheric conductance, improving its performance during active times.

H. K. Connor↗
NASA NTRS2004

Wind Tunnel Application of a Pressure-Sensitive Paint Technique to a Faceted Missile Model at Subsonic and Transonic Speeds

A pressure-sensitive paint (PSP) technique was applied in a wind tunnel experiment in the NASA Langley Research Center 8-Foot Transonic Pressure Tunnel to quantify the vortex-induced surface static pressures on a slender, faceted missile model at subsonic and transonic speeds. Global PSP calibrations were obtained using an in-situ method featuring the simultaneous electronically-scanned pressures (ESP) measurements. Both techniques revealed the significant influence leading-edge vortices on the surface pressure distributions. The mean error in the PSP measurements relative to the ESP data was approximately 0.6 percent at M(sub infinity)=0.70 and 2.6 percent at M(sub infinity)=0.90 and 1.20. The vortex surface pressure signatures obtained from the PSP and ESP techniques were correlated with the off-surface vortex cross-flow structures obtained using a laser vapor screen (LVS) flow visualization technique. The on-surface and off-surface techniques were complementary, since each provided details of the vortex-dominated flow that were not clear or apparent in the other.

Erickson, Gary E.↗
NASA NTRS2004

Wind Tunnel Application of a Pressure-Sensitive Paint Technique to a Faceted Missile Model at Subsonic and Transonic Speeds

A pressure-sensitive paint (PSP) technique was applied in a wind tunnel experiment in the NASA Langley Research Center 8-Foot Transonic Pressure Tunnel to quantify the vortex-induced surface static pressures on a slender, faceted missile model at subsonic and transonic speeds. Satisfactory global calibrations of the PSP were obtained at =0.70, 0.90, and 1.20, angles of attack from 10 degrees to 20 degrees, and angles of sideslip of 0 and 2.5 degrees using an in-situ method featuring the simultaneous acquisition of electronically-scanned pressures (ESP) at 57 discrete locations on the model. Both techniques clearly revealed the significant influence on the surface pressure distributions of the vortices shed from the sharp, chine-like leading edges. The mean error in the PSP measurements relative to the ESP data was approximately 0.6 percent at M infinity =0.70 and 2.6 percent at M infinity =0.90 and 1.20. The vortex surface pressure signatures obtained from the PSP and ESP techniques were correlated with the off-surface vortex cross-flow structures obtained using a laser vapor screen (LVS) flow visualization technique. The on-surface and off-surface techniques were complementary, since each provided details of the vortex-dominated flow that were not clear or apparent in the other.

Erickson, Gary E.↗
DOE OSTI2025

Adaptive Dynamic Digital Twin for Test Scenario Generation

Vehicle testing has been an important part in the development of both highly automated vehicles (HAV) and advanced driving assistant systems (ADAS). Obtaining a good representation of the Vehicle Under Test (VUT) is crucial for test scenario library generation (TSLG). Current vehicle testing methods often involve calibrating car-following models using vehicle trajectory data to create static representations that cannot be dynamically updated. For instance, when multiple vehicle trajectories are collected, it is difficult to automatically determine whether a new trajectory improves the model's representativeness or degrades its accuracy. In this paper, we introduce a dynamically updated digital twin modeling framework featuring an adaptive mechanism that evaluates new trajectory data. This mechanism can decide whether to incorporate newly collected data into the current model or create a separate digital twin model when the trajectory significantly differs from prior data. Vehicle location, speed, and acceleration extracted from the newly collected trajectory data are used to support the dynamic update decision. By integrating this digital twin model into the test library generation process, we demonstrate its ability to assist in generating test libraries while effectively handling newly collected data.

Chen, Hanlin [ORNL] (ORCID:0000000165087715)↗
NASA NTRS1992

Wind-tunnel static and free-flight investigation of high-angle-of-attack stability and control characteristics of a model of the EA-6B airplane

An investigation was conducted in the Langley 30- by 60-Foot Tunnel and the Langley 12-Foot Low-Speed Tunnel to identify factors contributing to a directional divergence at high angles of attack for the EA-6B airplane. The study consisted of static wind-tunnel tests, smoke and tuft flow-visualization tests, and free-flight tests of a 1/8.5-scale model of the airplane. The results of the investigation indicate that the directional divergence of the airplane is brought about by a loss of directional stability and effective dihedral at high angles of attack. Several modifications were tested that significantly alleviate the stability problem. The results of the free-flight study show that the modified configuration exhibits good dynamic stability characteristics and could be flown at angles of attack significantly higher than those of the unmodified configuration.

Jordan, Frank L., Jr.↗
DOE OSTI2019

Understanding Monsoonal Water Cycle Changes in a Warmer Climate in E3SMv1 Using a Normalized Gross Moist Stability Framework

Abstract One of the grand challenges of climate science is understanding the changes of the tropical rain belts and monsoon systems owing to CO 2 ‐induced warming. A promising path forward links the fluxes of energy and moisture to tropical circulation features. To this end, we make use of the Energy Exascale Earth System Model version 1, where the divergence of moist static energy and moisture have been calculated online, and employ a normalized gross moist stability (NGMS) diagnostic framework to understand the linkages between changes in the flow of energy and moisture within the monsoons. We focus on the Asian Summer Monsoon system and utilize a series of atmosphere‐land and atmosphere‐land‐ocean simulations to understand the connection between fluxes and monsoons. Uncoupled simulations with prescribed sea surface temperatures indicate that decreases in NGMS over land are important in explaining precipitation increases in response to both sea surface temperature and CO 2 increases. In fully coupled experiments, NGMS decreases remain an important contributor to the increase in P‐E, but the coupled simulations highlight the importance of consistent ocean and land responses in interpreting the monsoon changes. This study indicates that transient eddy fluxes play an important role in NGMS decreases and that a time‐mean view of the monsoon circulations is insufficient to quantify the link between future changes in the fluxes of energy and moisture. Compensation between dynamic and thermodynamic components of vertical moist static energy advection occurs, with the thermodynamic contribution dominating. The compensation is shown to be sensitive to relative humidity, with higher relative humidity leading to a stronger thermodynamic component.

Harrop, Bryce E.↗