Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron localization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electronic correlations in the semiconducting half-Heusler compound FeVSb

Electronic correlations are crucial to the low-energy physics of metallic systems with localized d and f states; however, their effect on band insulators and semiconductors is typically negligible. Here, we measure the electronic structure of the half-Heusler compound FeVSb, a band insulator with a filled shell configuration of 18 valence electrons per formula unit ( s 2 p 6 d 10 ). Additionally, angle-resolved photoemission spectroscopy reveals a mass renormalization of m * / m bare = 1.4 , where m * is the measured effective mass and m bare is the mass from density functional theory calculations with no added on-site Coulomb repulsion. Our measurements are in quantitative agreement with dynamical mean-field theory calculations, highlighting the many-body origin of the mass renormalization. This mass renormalization lies in dramatic contrast to other filled shell intermetallics, including the thermoelectric materials CoTiSb and NiTiSn, and has a similar origin to that in FeSi, where Hund's coupling induced fluctuations across the gap can explain a dynamical self-energy and correlations. Our work calls for a rethinking of the role of correlations and Hund's coupling in intermetallic band insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Three-dimensional inhomogeneity of electron-temperature-gradient turbulence in the edge of tokamak plasmas

Nonlinear multiscale gyrokinetic simulations of a Joint European Torus edge pedestal are used to show that electron-temperature-gradient (ETG) turbulence has a rich three-dimensional structure, varying strongly according to the local magnetic-field configuration. In the plane normal to the magnetic field, the steep pedestal electron temperature gradient gives rise to anisotropic turbulence with a radial (normal) wavelength much shorter than in the binormal direction. In the parallel direction, the location and parallel extent of the turbulence are determined by the variation in the magnetic drifts and finite-Larmor-radius (FLR) effects. The magnetic drift and FLR topographies have a perpendicular-wavelength dependence, which permits turbulence intensity maxima near the flux-surface top and bottom at longer binormal scales, but constrains turbulence to the outboard midplane at shorter electron-gyroradius binormal scales. Here our simulations show that long-wavelength ETG turbulence does not transport heat efficiently, and significantly decreases overall ETG transport—in our case by ~40%—through multiscale interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1994

Hybrid simulation of comet Shoemaker-Levy 9 interaction with Jovian bow shock

The interaction of the solar wind with comet Shoemaker-Levy 9 leading to the formation of the cometary magnetosphere and its interaction with the Jovian bow shock is simulated using a one dimensional hybrid code. The mass loading of the solar wind by the cometary ions leads to the formation of a bow shock behind which the plasma density is 2-3/cu cm and the electron temperature is 4 eV. The interaction of this system with the Jovian bow shock yields local enhancements of the magnetic field and the plasma density by factors of 4-5 and the electron temperature by 2-3.

Lipatov, A. S.↗
DOE OSTI2020

Localized corrosion at nm-scale hardening precipitates in Al-Cu-Li alloys

The localized corrosion of Li-containing nm hardening precipitates in the 3rd generation of Al-Cu-Li alloys was investigated based on a quasi in situ approach by sequentially exposing the material to NaCl solution and characterizing the structural, chemical, and electrochemical evolution at atomic scale using electron microscopy, spectroscopy, 3D tomography, electrochemical measurements, and DFT calculations. Localized corrosion of Al 7.5 Cu 4 Li (TB phase) initiated along {001} family of planes through the dealloying of Al and Li due to a low surface work function. Cu was enriched along the Cu (110) // T B (011) // Al (100) orientations on and around corroded T B precipitates. No strong galvanic interactions were observed at the T B and Al matrix interface due to the formation of a Li-C-O rich passivation layer during electrolyte exposure. Similarities and differences between T B and other common Al-Cu-Li precipitates (Al 2 CuLi, Al 6 CuLi 3 , and Al 3 Li) with respect to corrosion are discussed. Overall, the reported corrosion mechanism can assist in the assessment of the localized corrosion susceptibility of precipitation-hardened Al alloys and assist in the design of new alloys.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Mean excitation energies for stopping powers in various materials composed of elements hydrogen through argon

The local plasma model is used to study the effects of the chemical and physical state of a medium on its stopping power. The relationship between that model and a more exact quantum treatment of bound systems is elucidated by examining related quantities in both theories for the case of one and two-electron systems. Atomic mean excitation energies and straggling parameters in the local plasma model are compared with the accurate calculations of Inokuti et al. (1975, 1978, 1981). The use of the Gordon-Kim electron gas model of molecular bonding is used to determine the effects of covalent chemical bond shifts on the mean excitation energies for elements of the first two rows. Calculations of mean excitation energies of ionic bonded substances are presented, and the mean excitation energies of metals are discussed.

Wilson, J. W.↗
NASA NTRS1988

Plasma electrons as tracers of distant magnetotail structure - ISEE-3

This paper compares the electron spectra and phase space densities measured concurrently by ISEE-3 at 200 R(E), with those measured by DMSP at low altitudes. The field-aligned lobe electron phase space densities above 200 eV at ISEE were found to agree well with the DMSP-measured polar rain phase space densities near the polar cap; the spectral slopes above 200 eV were also similar. Below 100-200 eV, a thermal electron population was measured by ISEE in the distant tail, which arose from local entry of plasma through the distant magnetopause, which is not present at DMSP altitudes. These data show that the suprathermal tail lobe electrons are essentially a test particle population which can move freely along field lines to form polar rain; in contrast, the thermal electrons are bound to the tailward-flowing lobe ion population far down the tail and, thus, cannot reach the polar cap regions.

Baker, D. N.↗
NASA NTRS1994

Acceleration of electrons and ions by strong lower-hybrid turbulence in solar flares

One of the outstanding problems in solar flare theory is how to explain the 10-20 keV and greater hard x-ray emissions by a thick target bremsstrahlung model. The model requires the acceleration mechanism to accelerate approximately 10(exp 35) electrons sec(exp -l) with comparable energies, without producing a large return current which persists for long time scales after the beam ceases to exist due to Lenz's law, thereby, producing a self-magnetic field of order a few mega-Gauss. In this paper, we investigate particle acceleration resulting from the relaxation of unstable ion ring distributions, producing strong wave activity at the lower hybrid frequency. It is shown that strong lower hybrid wave turbulence collapses in configuration space producing density cavities containing intense electrostatic lower hybrid wave activity. The collapse of these intense nonlinear wave packets saturate by particle acceleration producing energetic electron and ion tails. There are several mechanisms whereby unstable ion distributions could be formed in the solar atmosphere, including reflection at perpendicular shocks, tearing modes, and loss cone depletion. Numerical simulations of ion ring relaxation processes, obtained using a 2 1/2-D fully electromagnetic, relativistic particle in cell code are discussed. We apply the results to the problem of explaining energetic particle production in solar flares. The results show the simultaneous acceleration of both electrons and ions to very high energies: electrons are accelerated to energies in the range 10-500 keV, while ions are accelerated to energies of the order of MeVs, giving rise to x-ray emission and gamma-ray emission respectively. Our simulations also show wave generation at the electron cyclotron frequency. We suggest that these waves are the solar millisecond radio spikes. The strong turbulence collapse process leads to a highly filamented plasma producing many localized regions for particle acceleration and resulting in approximately 10(exp 17) electron 'beamlets' of width approximately equal to 10 lambda sub De which eliminates the production of large magnetic fields. In this paper, we demonstrate that the model produces an energetic electron spectrum with the right flux to account for the hard x-ray observations.

Spicer, D. S.↗
DOE OSTI2022

Effect of Carbon Nanofiber Clustering on the Micromechanical Properties of a Cement Paste

The use of carbon nanofibers (CNFs) in cement systems has received significant interest over the last decade due to their nanoscale reinforcing potential. However, despite many reports on the formation of localized CNF clusters, their effect on the cement paste micromechanical properties and relation to the mechanical response at the macroscopic scale are still not fully understood. In this study, grid nanoindentation coupled with scanning electron microscopy and energy dispersive spectroscopy was used to determine the local elastic indentation modulus and hardness of a portland cement paste containing 0.2% CNFs with sub-micro and microscale CNF clusters. The presence of low stiffness and porous assemblage of phases (modulus of 15–25 GPa) was identified in the cement paste with CNFs and was attributed primarily to the interfacial zone surrounding the CNF clusters. The CNFs favored the formation of higher modulus C–S–H phases (>30 GPa) in the bulk paste at the expense of the lower stiffness C–S–H. Nanoindentation results combined with a microscale–macroscale upscaling homogenization method further revealed an elastic modulus of the CNF clusters in the range from 18 to 21 GPa, indicating that the CNF clusters acted as compliant inclusions relative to the cement paste.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Bandgap analysis and carrier localization in cation-disordered ZnGeN 2

The bandgap of ZnGeN 2 changes with the degree of cation site disorder and is sought in light emitting diodes for emission at green to amber wavelengths. By combining the perspectives of carrier localization and defect states, we analyze the impact of different degrees of disorder on electronic properties in ZnGeN 2 , addressing a gap in current studies, which largely focus on dilute or fully disordered systems. The present study demonstrates changes in the density of states and localization of carriers in ZnGeN 2 calculated using bandgap-corrected density functional theory and hybrid calculations on partially disordered supercells generated using the Monte Carlo method. We use localization and density of states to discuss the ill-defined nature of a bandgap in a disordered material and identify site disorder and its impact on the structure as a mechanism controlling electronic properties and potential device performance. Decreasing the order parameter results in a large reduction of the bandgap. The reduction in bandgap is due, in part, to isolated, localized states that form above the valence band continuum associated with nitrogen coordinated by more zinc than germanium. The prevalence of defect states in all but the perfectly ordered structure creates challenges for incorporating disordered ZnGeN 2 into optical devices, but the localization associated with these defects provides insight into the mechanisms of electron/hole recombination in the material.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Differential temperature stress measurement employing array sensor with local offset

The instrument has a focal plane array of infrared sensors of the integrating type such as a multiplexed device in which a charge is built up on a capacitor which is proportional to the total number of photons which that sensor is exposed to between read-out cycles. The infrared sensors of the array are manufactured as part of an overall array which is part of a micro-electronic device. The sensor achieves greater sensitivity by applying a local offset to the output of each sensor before it is converted into a digital word. The offset which is applied to each sensor will typically be the sensor's average value so that the digital signal which is periodically read from each sensor of the array corresponds to the portion of the signal which is varying in time. With proper synchronization between the cyclical loading of the test object and the frame rate of the infrared array the output of the A/D converted signal will correspond to the stress field induced temperature variations. A digital lock-in operation may be performed on the output of each sensor in the array. This results in a test instrument which can rapidly form a precise image of the thermoelastic stresses in an object.

Lesniak, Jon R.↗
DOE OSTI2025

Potentials of mean force fail to describe chemical bond-breaking in solution

Many liquid phase studies assume that the potential energy surfaces of reacting molecules are the same as in the gas phase, neglecting complex solvent dynamics that can completely alter the nature of chemical reactivity. Even studies that include solvent effects typically only consider them in an average, equilibrium way as part of a potential of mean force (PMF). In this work, we use mixed quantum/classical simulations to compare how equilibrium and non-equilibrium solvent motions affect the photodissociation of a simple diatomic molecule, NaK + , in liquid tetrahydrofuran. A PMF analysis shows that as the excited-state molecule dissociates with the solvent at equilibrium, the bonding electron remains associated with K + at short bond distances but eventually localizes on Na + at the end of dissociation. When we examine non-equilibrium dynamical photodissociation trajectories, however, we find that they fall into three distinct categories: about a quarter of them have the bonding electron mainly associated with Na + , another quarter stay mainly associated with K + , and about half have the bonding electron shared roughly equally between the two ions. The results show that equilibrium PMFs cannot accurately describe the dynamics of bond-breaking chemical reactions in solution because there is insufficient time for the solvent to reach equilibrium on the time scale over which bond dissociation occurs. Furthermore, our analysis shows that the solvent coupling between the electronic energy surfaces is similar at and away from equilibrium, suggesting that other factors, such as solute velocity-driven solvent memory effects, play a more important role in explaining the failure of the equilibrium PMF to predict the non-equilibrium dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Lattice distortions and metal-insulator transition in hexagonal FeS

Using total x-ray scattering and density functional theory calculations based on experimental data, we study the metal-insulator transition (MIT) in the strongly correlated system FeS with hexagonal symmetry. We find that it arises from the combined effect of static lattice distortions and antiferromagnetic ordering, while electron-electron correlations appear to play a minor role. The presence of local lattice distortions above the MIT explains well the evolution of transport and magnetic properties with changing temperature or pressure. Intrinsically, lattice distortions in hexagonal FeS act as lattice degrees of freedom that bridge competing electronic phases, thus facilitating transitions between them. The mechanism of MIT operating in h-FeS appears to be common to strongly correlated binary systems involving 3d transition metals, warranting further investigations on the lattice distortions-property relationship in this broad class of materials using the approach adopted here.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Direct Quantification of Heat Generation Due to Inelastic Scattering of Electrons Using a Nanocalorimeter

Transmission electron microscopy (TEM) is arguably the most important tool for atomic-scale material characterization. A significant portion of the energy of transmitted electrons is transferred to the material under study through inelastic scattering, causing inadvertent damage via ionization, radiolysis, and heating. In particular, heat generation complicates TEM observations as the local temperature can affect material properties. Here, the heat generation due to electron irradiation is quantified using both top-down and bottom-up approaches: direct temperature measurements using nanowatt calorimeters as well as the quantification of energy loss due to inelastic scattering events using electron energy loss spectroscopy. Combining both techniques, a microscopic model is developed for beam-induced heating and to identify the primary electron-to-heat conversion mechanism to be associated with valence electrons. Building on these results, the model provides guidelines to estimate temperature rise for general materials with reasonable accuracy. This study extends the ability to quantify thermal impact on materials down to the atomic scale.

42 ENGINEERING↗
NASA NTRS1983

On the evolution of Saturn's 'Spokes' - Theory

Starting with the assumption that negatively charged micron-sized dust grains may be elevated above Saturn's ring plane by plasma interactions, the subsequent evolution of the system is discussed. The discharge of the fine dust by solar UV radiation produces a cloud of electrons which moves adiabatically in Saturn's dipolar magnetic field. The electron cloud is absorbed by the ring after one bounce, alters the local ring potential significantly, and reduces the local Debye length. As a result, more micron-sized dust particles may be elevated above the ring plane and the spoke grows. This process continues until the electron cloud has dissipated.

Morfill, G. E.↗
NASA NTRS1989

Energy deposition of corpuscular radiation in the middle atmosphere

Main components of corpuscular radiation contributing to energy deposition (ED in eV/cu cm/s) in the atmosphere (10 to 100 km) are cosmic ray nuclei (CR - galactic and solar) and high energy electrons (HEE), mainly of magnetospheric origin. Galactic CR depending on solar cycle phase and latitude are dominant source of ED by corpuscular radiation below 50 to 60 km. Below 20 km secondaries must be assumed. More accurate treatment need assuming of individual HE solar flare particles, cut off rigidities in geomagnetic field and their changes during magnetospheric disturbances. Electrons E sub e greater than 30 keV of magnetospheric origin penetrating to atmosphere contribute to production rate below 100 km especially on night side. High temporal variability, local time dependence and complicated energy spectra lead to complicated structure of electron ED rate. Electrons of MeV energy found at geostationary orbit, pronouncing relation to solar and geomagnetic activity, cause maximum ED at 40 to 60 km. Monitoring the global distribution of ED by corpuscular radiation in middle atmosphere need continuing low altitude satellite measurements of both HEE and x ray BS from atmosphere as well as measurements of energy spectra and charge composition of HE solar flare particles.

Kudela, K.↗
NASA NTRS1990

Beam-generated upper hybrid noise in Jupiter's outer magnetosphere

A model for generation of upper hybrid waves in Jupiter's outer magnetosphere is presented. Energetic electrons accelerated on high-latitude auroral field lines at 1 R(J) altitudes are assumed to stream outwards to the distant magnetosphere. The large decrease in the local magnetic field strength results in a highly collimated, field-aligned electron beam due to conservation of the particle's magnetic moment. As the beam travels outward it passes through the plasma sheet boundary layer region located on the edges of the plasma sheet. Because of the large field-aligned anisotropy of the beam, the distribution is unstable to the excitation of the upper hybrid waves which amplify and then undergo mode conversion at the f(p) layer to generate the Jovian continuum radiation. A novel feature of the model is the beam-anisotropic heat flux instability which drives UH waves unstable without the need for any positive slope on the electron distribution function.

Barbosa, D. D.↗
NASA NTRS1998

Global Auroral Energy Deposition during Substorm Onset Compared with Local Time and Solar Wind IMF Conditions

The global images made by the Ultraviolet Imager (UVI) aboard the IASTP/Polar Satellite are used to derive the global auroral energy deposited in the ionosphere resulting from electron precipitation. During a substorm onset, the energy deposited and its location in local time are compared to the solar wind IMF conditions. Previously, insitu measurements of low orbiting satellites have made precipitating particle measurements along the spacecraft track and global images of the auroral zone, without the ability to quantify energy parameters, have been available. However, usage of the high temporal, spatial, and spectral resolution of consecutive UVI images enables quantitative measurement of the energy deposited in the ionosphere not previously available on a global scale. Data over an extended period beginning in January 1997 will be presented.

Spann, J. F.↗
DOE OSTI2023

Thermal quench induced by a composite pellet-produced plasmoid

Injecting shattered pellets is the critical concept of the envisaged ITER disruption mitigation system (DMS). Rapid deposition of large amounts of material should presumably result in controlled cooling of the entire plasma. A considerable transfer of thermal energy from the electrons of the background plasma to the ions accompanies a localized material injection due to the ambipolar expansion along the magnetic field line of the cold and dense plasmoid produced by the ablated pellet. Radiation initially plays the dominant role in the energy balance of a composite plasmoid containing high-Z impurities. A competition between the ambipolar expansion and the radiative losses defines the Thermal Quench scenario, including the amount of pre-quench thermal energy radiated on a short collisional timescale—possibly detrimental for the plasma-facing components. The present work quantifies plasmoid energy balance for disruption mitigation parameters. For pure hydrogen injection, up to 90% of the pre-pellet electron thermal energy may go to the newly injected ions. We also demonstrate that a moderate high-Z impurity content within the plasmoid can reduce highly localized radiation at the beginning of the expansion. The thermal energy will then dissipate on the much longer ion collisional timescale, which would be attractive for ITER DMS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗