Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active lattices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Electron transfer calculations between edge sharing octahedra in hematite, goethite, and annite

A key reaction underlying the charge transport in iron containing oxides, clays, micas is the Fe$^{2+}$-Fe$^{3+}$ exchange reaction between edge-sharing iron octahedra. These reactions facilitate conduction in these minerals by the thermally-activated hopping of small polarons across the lattice. Depending on the mineral and local charge state the small polaron can either encase an electron or hole. The probability for conduction of small polarons depends strongly on the height and adiabicity of the reaction barrier, with larger and more diabatic barriers yielding slow conduction associated with either weak coupling or a large prerequisite rearrangement of the lattice during charge transport. To model these reactions, a first principle electron transfer (ET) method was developed to model the small polaron hopping between the edge-sharing octahedra sites in hematite ($e^{-}$ polaron), goethite ($e^{-}$ polaron), and annite ($h^{+}$ polaron) bulk structures. The ET method is based on electronic structure methods (i.e., plane-wave Density Functional Theory) capable of performing calculations with periodic cells and large size systems efficiently while at the same time being accurate enough to be used in the estimation of the electron-transfer coupling matrix element, $V_{AB}$, and the electron transfer transmission factor, $\kappa_{el}$. Additionally, the calculations confirmed the existence of small polarons in all three minerals, and the reactions were predicted to be strongly adiabatic. It was found that transfer of a hole in the octahedral layer of annite had an adiabatic barrier of $0.311$ eV, and the transfer of an extra electron in hematite and goethite had adiabatic barriers of $0.242$ eV and $0.232$ eV respectively. The electronic coupling parameters,$V_{AB}$, were found to be $0.188$ eV, $0.196$ eV, and $0.102$ eV respectively for hematite, goethite, and annite. While similar bonding topologies pertain, the underlying basis for the differences is the subtle differences in local structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

General synthesis of high-entropy single-atom nanocages for electrosynthesis of ammonia from nitrate

Given the growing emphasis on energy efficiency, environmental sustainability, and agricultural demand, there’s a pressing need for decentralized and scalable ammonia production. Converting nitrate ions electrochemically, which are commonly found in industrial wastewater and polluted groundwater, into ammonia offers a viable approach for both wastewater treatment and ammonia production yet limited by low producibility and scalability. Here we report a versatile and scalable solution-phase synthesis of high-entropy single-atom nanocages (HESA NCs) in which Fe and other five metals-Co, Cu, Zn, Cd, and In-are isolated via cyano-bridges and coordinated with C and N, respectively. Incorporating and isolating the five metals into the matrix of Fe resulted in Fe-C5 active sites with a minimized symmetry of lattice as well as facilitated water dissociation and thus hydrogenation process. As a result, the Fe-HESA NCs exhibited a high selectivity toward NH3 from the electrocatalytic reduction of nitrate with a Faradaic efficiency of 93.4% while maintaining a high yield rate of 81.4 m h -1 mg -1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic Investigation of Light-Induced Degradation Paramagnetic Defect in Czochralski Silicon

We report on the electron paramagnetic resonance (EPR) spectra of Cz and FZ Si in different stages of light-induced degradation. Firstly, we show that the paramagnetic signal at low temperature (10K) is dependent on the state of light-induced degradation performed at room temperature and on the sample doping. The light-degraded state in p-Cz Si shows strong, sharp paramagnetic defect signatures compared to samples in the annealed state. When an excitation light is applied during the EPR measurement, additional structures appear in the spectra. In contrast, the wide EPR active signature related to boron interaction with lattice, is present in the annealed state but diminishes after light exposure. Finally, we show that the degraded paramagnetic signal returns when annealed samples are exposed to ambient light. We suggest that these changes in the electron paramagnetic resonance spectra is related to the boron-oxygen defect that causes light-induced degradation.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2025

Sub-wavelength optical lattice in 2D materials

Recently, light-matter interaction has been vastly expanded as a control tool for inducing and enhancing many emergent nonequilibrium phenomena. However, conventional schemes for exploring such light-induced phenomena rely on uniform and diffraction-limited free-space optics, which limits the spatial resolution and the efficiency of light-matter interaction. Here, we overcome these challenges using metasurface plasmon polaritons (MPPs) to form a sub-wavelength optical lattice. Specifically, we report a “nonlocal” pump-probe scheme where MPPs are excited to induce a spatially modulated AC Stark shift for excitons in a monolayer of MoSe 2 , several microns away from the illumination spot. We identify nearly two orders of magnitude reduction for the required modulation power compared to the free-space optical illumination counterpart. Moreover, we demonstrate a broadening of the excitons’ linewidth as a robust signature of MPP-induced periodic sub-diffraction modulation. Our results will allow exploring power-efficient light-induced lattice phenomena below the diffraction limit in active chip-compatible MPP architectures.

36 MATERIALS SCIENCE↗
NASA NTRS1980

The effect of zirconium on the isothermal oxidation of nominal Ni-14Cr-24Al alloys

The isothermal oxidation of Ni-14Cr-24Al-xZr-type alloys was performed in still air at 1100, 1150, and 1200 C for times up to 200 hr. The zirconium content of the alloys varied from 0-0.63 atom percent (a/o). The oxidized surfaces were studied by optical microscopy, X-ray diffraction, and scanning electron microscopy. The base alloy was an alumina former with the zirconium-containing alloys also developing some ZrO2. The addition of zirconium above 0.066 a/o increased the rate of weight gain relative to the base alloy. Due to oxide penetratio, the weight gain increased with Zr content; however, the scale thickness did not increase. The Zr did increase the adherence of the oxide, particularly at 1200 C. The delta W/A vs. time data fit the parabolic model of oxidation. The specific diffusion mechanism operative could not be identified by analysis of the calculated activation energies. Measurements of the Al2O3 scale lattice constants yielded the same values for all alloys.

Kahn, A. S.↗
NASA NTRS1991

Creep and fracture of dispersion-strengthened materials

The creep and fracture of dispersion strengthened materials is reviewed. A compilation of creep data on several alloys showed that the reported values of the stress exponent for creep varied between 3.5 and 100. The activation energy for creep exceeded that for lattice self diffusion in the matrix in the case of some materials and a threshold stress behavior was generally reported in these instances. The threshold stress is shown to be dependent on the interparticle spacing and it is significantly affected by the initial microstructure. The effect of particle size and the nature of the dispersoid on the threshold stress is not well understood at the present time. In general, most studies indicate that the microstructure after creep is similar to that before testing and very few dislocations are usually observed. It is shown that the stress acting on a dispersoid due to a rapidly moving dislocation can exceed the particle yield strength of the G sub p/1000, where G sub p is the shear modulus of the dispersoid. The case when the particle deforms is examined and it is suggested that the dislocation creep threshold stress of the alloy is equal to the yield strength of the dispersoid under these conditions. These results indicate that the possibility that the dispersoid creep threshold stress is determined by either the particle yield strength or the stress required to detach a dislocation from the dispersoid matrix interface. The conditions under which the threshold stress is influenced by one or the other mechanism are discussed and it is shown that the particle yield strength is important until the extent of dislocation core relaxation at the dispersoid matrix interface exceeds about 25 pct. depending on the nature of the particle matrix combination. Finally, the effect of grain boundaries and grain morphology on the creep and fracture behavior of dispersoid strengthened alloys is examined.

Raj, Sai V.↗
NASA NTRS1994

Cubic GaS: A Surface Passivator For GaAs

Thin films of cubic form of gallium sulfide (GaS) formed on surfaces of gallium arsenide (GaAs) substrates via metal/organic chemical vapor deposition (MOCVD). Deposited cubic GaS, crystalline lattice matched to substrate GaAs, neutralizes electrically active defects on surfaces of both n-doped and p-doped GaAs. Enabling important GaAs-based semiconducting materials to serve as substrates for metal/insulator/semiconductor (MIS) capacitors. Cubic GaS enables fabrication of ZnSe-based blue lasers and light-emitting diodes. Because GaS is optically transparent, deposited to form window layers for such optoelectronic devices as light-emitting diodes, solar optical cells, and semiconductor lasers. Its transparency makes it useful as interconnection material in optoelectronic integrated circuits. Also useful in peeled-film technology because selectively etched from GaAs.

Hepp, Aloysius F.↗
DOE OSTI2023

Are grid cells used for navigation? On local metrics, subjective spaces, and black holes

The symmetric, lattice-like spatial pattern of grid-cell activity is thought to provide a neuronal global metric for space. This view is compatible with grid cells recorded in empty boxes but inconsistent with data from more naturalistic settings. Here, we review evidence arguing against the global-metric notion, including the distortion and disintegration of the grid pattern in complex and three-dimensional environments. We argue that deviations from lattice symmetry are key for understanding grid-cell function. We propose three possible functions for grid cells, which treat real-world grid distortions as a feature rather than a bug. First, grid cells may constitute a local metric for proximal space rather than a global metric for all space. Second, grid cells could form a metric for subjective action-relevant space rather than physical space. Third, distortions may represent salient locations. Finally, we discuss mechanisms that can underlie these functions. These ideas may transform our thinking about grid cells.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Kinetic Probes of the Origin of Activity in MOF-Based C–H Oxidation Catalysis

The development of homogeneous catalysis is enabled by the availability of a rich toolkit of kinetics experiments, such as the Hgdrop test, that differentiate catalytic activity at ligand-supported metal complexes from potential heterogeneous catalysts derived from decomposition of molecular species. Metal-organic frameworks (MOFs) have garnered significant attention as platforms for catalysis at site-isolated, interstitial catalyst sites. Unlike homogeneous catalysis, relatively few strategies have been advanced to evaluate the origin of catalytic activity in MOF-promoted reactions. Many of the MOFs that have been examined as potential catalysts are comprised of molecular constituents that represent viable catalysts in the absence of the extended MOF lattice, and thus interfacial sites and leached homogeneous species represent potential sources of catalyst activity. Here, we demonstrate that analysis of deuterium kinetic isotope effects (KIEs) and olefin epoxidation diastereoselectivity provides probes of the origin of catalytic activity in MOF-promoted oxidation reactions. These analyses support involvement of lattice-based Fe sites in the turnover-limiting step of C–H activation with Fe-MOF-74-based materials (i.e., the MOF functions as a bona fide catalyst) and evidence that Cu 2 -based MOF MIL-125-Cu 2 O 2 functions as a solid-state initiator for solution-phase oxidation chemistry and is not involved in the turnover limiting step (i.e., the MOF does not function as a catalyst for substrate functionalization). furthermore, we anticipate that the simple experiments described here will provide a valuable tool for clarifying the role of MOFs in C–H oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantifying Large Lattice Relaxations in Photovoltaic Devices

Temporal variations of Cu(In,Ga)Se 2 photovoltaic device properties during light exposure at various temperatures and voltage biases for times up to 100 h are analyzed using the kinetic theory of large lattice relaxations. Open-circuit voltage and p-type doping increased with charge injection and decreased with temperature at low injection conditions. Furthermore, lattice relaxation can account for both trends and activation energies extracted from the data are approximately 0.9 and 1.2 eV for devices with lower and higher sodium content, respectively. In these devices, increased sodium content resulted in higher initial p-type doping with greater stability. First-principles calculations providing revised activation energies for the (V Se -V Cu ) complex suggest that this defect does not account for the metastability observed here.

14 SOLAR ENERGY↗
DOE OSTI2020

Visible-Light-Activated Photocatalytic Films toward Self-Cleaning Membranes

Membranes are among the most promising means of delivering increased supplies of fit-for-purpose water, but membrane fouling remains a critical issue restricting their widespread application. Coupling photocatalysis with membrane separation has been proposed as a potentially effective approach to reduce membrane fouling. However, commonly used materials in photocatalysis limit use of low-cost sources such as sunlight due to their large band gaps. There are few examples of in situ photocatalytic self-cleaning of membranes, with removal from the filtration system and ex situ illumination being more common. In this study, a visible-light-activated photocatalytic film prepared by nitrogen doping into the lattice of TiO 2 was deposited on commercial ceramic membranes via atomic layer deposition (ALD). The synergy between membrane separation and redox reactions between organic pollutants and reactive oxygen species (ROS) produced by the visible-light-activated layer offers a possibility for stable and sustainable membrane operation under in situ solar irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Analysis of differential scanning calorimetry data for aged plutonium

Differential scanning calorimetry data for samples of a 52 year old plutonium alloy with 3.3 at. % Ga that were heated beyond the melting point is analyzed using transition state theory to find activation energies for the δ to ε and ε to liquid phase transitions. A Bayesian statistical method involving a Gaussian process model is used to find mean values and confidence intervals for the activation energies. The activation energy for the δ to ε phase transition increases by 3.3 ± 3.8% per decade, relative to the case when all age related plutonium lattice point defects have been removed through annealing. The corresponding increase in activation energy for the ε to liquid transition is shown to be 7.1 ± 1.8% per decade. It is postulated that the change in activation energy with age for both phase transitions is caused, in part, by the accumulation of the same type of lattice point defects associated with the observed increase in elastic bulk modulus over time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hierarchical Defect Engineering for LiCoO 2 through Low-Solubility Trace Element Doping

Real-world industry-relevant battery composite electrodes are hierarchically structured. Their structural and chemical complexity is featured by ubiquitous multi-scale porosity and cracks, solid-solid and solid-liquid interfaces, compositional and redox heterogeneity, as well as lattice disordering and deformation. In particular for the active cathode particles, which are the fundamental building blocks for the energy reservoir, it is a consensus that these structural and chemical defects could have a profound impact on the battery performance. An in-depth understanding of the underlying mechanisms could critically inform the cathode material engineering, which would have a tremendous potential but remains a daunting challenge at present. In this work, we tackle this question by studying LiCoO 2 (LCO) with trace doping of Ti, which exhibits a low solubility in the LCO layered lattice. Additionally, we observed the spontaneous and heterogeneous segregation of the dopant (Ti) across a wide range of length scales. In addition to the modification of the particle surface and the buried grain boundaries within the particle, we reveal that the Ti doping has induced a significant amount of lattice distortions, which, in turn, promotes the robustness of the LCO lattice at high state of charge (above 4.5V). Our result formulates a multi-scale defect engineering strategy that could be applicable to the synthesis of a broad range of energy materials for applications in batteries and beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Probing Electrochemical Mg-Ion Activity in MgCr 2– x V x O 4 Spinel Oxides

Mg migration in oxide spinels is impeded by strong affinity between divalent Mg and oxygen, suggesting a necessity of exploring new chemistry of solid lattices for functional Mg-ion electrode materials. Cationic mobility with a suitable activation energy in Cr spinels is Tn. evidenced by theoretical and experimental results, while redox potentials of V are appropriate to operate with currently limited candidates of '''c" nonaqueous electrolytes. By controlling the structure, composition, and complexity, a largely solid-solution MgCrVO 4 spinel was synthesized, which, unlike nanocornposites, can bring together the advantages of each transition metal in the lattice. The spinel was successfully synthesized by a simple solid-state reaction with minor inactive Cr- or V-rich components, which was confirmed via 25 Mg MAS NMR and high-resolution X-ray diffraction analyses. A thermally and anodically stable Mg(TPFA) 2 /triglyme electrolyte was utilized for high-temperature electrochemistry and lowering kinetic barriers at and across interfaces so as to observe intercalation behavior of Mg in the designed lattice. Multimodal characterization confirmed an apparent bulk demagnesiation from MgCrVO 4 with partial reversibility by probing evolution of the local and long-range structure as well as vanadium and chromium electronic states within the lattice. Furthermore, characterization experiments also provided a direct evidence for (de)intercalation reactions that occurred without any major competitive conversion reactions or insertion of protons into the lattice, except for the formation of a surface rock salt phase upon charge. These findings in Mg-ion activity expand opportunities to design Mg spinel oxide materials while highlighting the need to identify the origins of reversibility challenges due to, but not limited to, phase stability, particularly for the charged states, barriers at the interface, electrolyte stabilities, and desolvation phenomena, collectively hindering practical use as cathode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Guiding Self-Assembly of Active Colloids by Temporal Modulation of Activity

Self-organization phenomena in ensembles of self-propelled particles open pathways to the synthesis of new dynamic states not accessible by traditional equilibrium processes. The challenge is to develop a set of principles that facilitate the control and manipulation of emergent active states. In this study, we report that dielectric rolling colloids energized by a pulsating electric field self-organize into alternating square lattices with a lattice constant controlled by the parameters of the field. We combine experiments and simulations to examine spatiotemporal properties of the emergent collective patterns and investigate the underlying dynamics of the self-organization.We reveal the resistance of the dynamic lattices to compression and expansion stresses leading to a hysteretic behavior of the lattice constant. The general mechanism of pattern synthesis and control in active ensembles via temporal modulation of activity can be applied to other active colloidal systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Engineering Active Fe Sites on Nickel–Iron Layered Double Hydroxide through Component Segregation for Oxygen Evolution Reaction

Nickel-iron layered double hydroxide (NiFe LDH) is a promising oxygen evolution reaction (OER) electrocatalyst under alkaline conditions. Much research has been performed to understand the structure-activity relationship of NiFe LDH under OER conditions. However, the specific role of the Fe species remains unclear and under debate. Herein, based on DFT calculations, it was discovered that the edge Fe sites show higher activity towards OER than either the edge Ni sites or lattice sites. Therefore, a facile acid-etching method was proposed to controllably induce the formation of edge Fe sites in NiFe LDH, and the obtained sample exhibited higher OER activity. X-ray absorption near edge structure and extended X-ray absorption fine structure analyses further revealed that the interaction of the edge Fe species with Ni is believed to contribute to the enhancement of the OER performance. This work provides a new understanding of the structure-activity relationship in NiFe LDH and offers a facile method for the design of efficient electrocatalysts in an alkaline environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Epitaxial heterointerfacial electron bridge synchronizes oxygen evolution activity and stability on a layered double hydroxide surface

Scalable green hydrogen production via electrocatalytic water splitting is largely restricted by the insufficient activity and stability of oxygen evolution reaction (OER) catalysts at the anode. As a class of the most active OER catalysts in alkaline electrolyzers, the application of layered double hydroxides (LDHs) remains a main challenge owing to the unstable lattice oxygen dissolution due to the dominant lattice oxygen-involving OER mechanism during long-term operation. Herein, we found that using an epitaxial hetero-interfacing nickel hydroxide (namely Ni(OH) 2 ) as an electron bridge between an active FeCo LDH and Ni foam support to form an LDH*/NFO catalyst, the electronic storage capacity around the Fermi level (-0.5 to +0.5 eV, e-D FE ) sharply increases from 0.93 per cell to 1.51 per cell. Subsequently, we demonstrate that this high e-D FE enables ceaseless and fast power injection into the kinetic process of intermediate species conversion and inhibits lattice oxygen dissolution in the active FeCo LDH. Consequently, it demonstrated a low OER overpotential of 246 mV at a current density of 100 mA cm -2 and ultrahigh stability for up to 3500 hours with an ultraslow overpotential increase rate of 9.4 × 10 -3 mV h -1 . Therefore, we developed an epitaxial hetero-interfacial electron bridging strategy to synchronize the activity and stability of available catalysts for scalable green hydrogen production via electrocatalytic water splitting.

25 ENERGY STORAGE↗
DOE OSTI2023

Unveiling the catalytic mechanism of GTP hydrolysis in microtubules

Microtubules (MTs) are large cytoskeletal polymers, composed of αβ-tubulin heterodimers, capable of stochastically converting from polymerizing to depolymerizing states and vice versa. Depolymerization is coupled with hydrolysis of guanosine triphosphate (GTP) within β-tubulin. Hydrolysis is favored in the MT lattice compared to a free heterodimer with an experimentally observed rate increase of 500- to 700-fold, corresponding to an energetic barrier lowering of 3.8 to 4.0 kcal/mol. Mutagenesis studies have implicated α-tubulin residues, α:E254 and α:D251, as catalytic residues completing the β-tubulin active site of the lower heterodimer in the MT lattice. The mechanism for GTP hydrolysis in the free heterodimer, however, is not understood. Additionally, there has been debate concerning whether the GTP-state lattice is expanded or compacted relative to the GDP state and whether a “compacted” GDP-state lattice is required for hydrolysis. In this work, extensive quantum mechanics/molecular mechanics simulations with transition-tempered metadynamics free-energy sampling of compacted and expanded interdimer complexes, as well as a free heterodimer, have been carried out to provide clear insight into the GTP hydrolysis mechanism. α:E254 was found to be the catalytic residue in a compacted lattice, while in the expanded lattice, disruption of a key salt bridge interaction renders α:E254 less effective. The simulations reveal a barrier decrease of 3.8 ± 0.5 kcal/mol for the compacted lattice compared to a free heterodimer, in good agreement with experimental kinetic measurements. Additionally, the expanded lattice barrier was found to be 6.3 ± 0.5 kcal/mol higher than compacted, demonstrating that GTP hydrolysis is variable with lattice state and slower at the MT tip.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗