Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “In(HO)3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

MESSENGER Observations of Reconnection and Its Effects on Mercury's Magnetosphere

During MESSENGER's second and third flybys of Mercury on October 6, 2008 and September 29, 2009, respectively, southward interplanetary magnetic fields produced very intense reconnection signatures in the dayside and nightside magnetosphere and very different systemlevel responses. The IMF during the second flyby was continuously southward and the magnetosphere appeared very active with very large magnetic fields normal to the magnetopause and the generation of flux transfer events at the magnetopause and plasmoids in the tail current sheet every 30 s to 90 s. However, the strength and direction of the tail magnetic field was very stable. In contrast the third flyby experienced a variable IMF with it varying from north to south on timescales of minutes. Although the MESSENGER measurements were limited this time to the nightside magnetosphere, numerous examples of plasmoid release in the tail were detected, but they were not periodic. Rather, plasmoid release was highly correlated with the four large enhancements of the tail magnetic field (i.e. by factors > 2) with durations of approx. 2 - 3 min. The increased flaring of the magnetic field during these intervals indicates that the enhancements were caused by loading of the tail with magnetic flux transferred from the dayside magnetosphere. New analyses of the second and third flyby observations of reconnection and its system-level effects will be presented. The results will be examined in light of what is known about the response of the Earth's magnetosphere to variable versus steady southward IMF.

Slavin, James A.↗
NASA NTRS2022

Determining Latitudinal Extent of Energetic Electron Precipitation Using MEPED On-Board NOAA/POES

Energetic Electron Precipitation (EEP) from the plasma sheet and the radiation belts ionizes the polar lower thermosphere and mesosphere. EEP increases the production of NO x and HO x , which will catalytically destroy ozone, an important element of atmospheric dynamics. Therefore, measurement of the latitudinal extent of the precipitation boundaries is important in quantifying the atmospheric effects of the Sun-Earth interaction. This study uses measurements by the Medium Energy Proton Electron Detector (MEPED) of six NOAA/POES and EUMETSAT/METOP satellites from 2004 to 2014 to determine the latitudinal boundaries of EEP and their variability with geomagnetic activity and solar wind drivers. Variation of the boundaries for different electron energies and Magnetic Local Time (MLT) is studied. Regression analyses are applied to determine the best predictor variable based on solar wind parameters and geomagnetic indices. The highest correlation was found for the pressure-corrected Dst index when applying a linear regression model. A model of the equatorward EEP boundary is developed separately for three different energy channels, >43, >114, and >292 keV, and for 3 hour MLT sectors. For >43 keV EEP, 80% of the equatorward boundaries predicted by the model are within ±2.2° cgmlat. The model exhibits a solar cycle bias where it systematically exaggerates the equatorward movement of the EEP region during solar minimum. The highest accuracy of the model is found in periods dominated by corotating interaction regions/high speed solar wind streams. The result will be a key element for constructing a model of EEP variability to be applied in atmosphere climate models.

E. M. Babu↗
NASA NTRS2020

The Destruction and Recreation of the X-Ray Corona in a Changing-look Active Galactic Nucleus

We present the drastic transformation of the X-ray properties of the active galactic nucleus 1ES 1927+654, following a changing-look event. After the optical/UV outburst the power-law component, produced in the X-ray corona, disappeared, and the spectrum of 1ES 1927+65 instead became dominated by a blackbody component (kT ∼ 80− 120 eV). This implies that the X-ray corona, ubiquitously found in AGN, was destroyed in the event. Our dense ∼ 450 day long X-ray monitoring shows that the source is extremely variable in the X-ray band. On long time scales the source varies up to ∼ 4 dex in ∼ 100 days, while on short timescales up to ∼ 2 dex in ∼ 8 hours. The luminosity of the source is found to first show a strong dip down to ∼ 10(exp 40) erg/s, and then a constant increase in luminosity to levels exceeding the pre-outburst level &300 days after the optical event detection, rising up asymptotically to ∼ 2 × 10(exp 44) erg/s. As the X-ray luminosity of the source increases, the X-ray corona is recreated, and a very steep power-law component (Γ ≃ 3) reappears, and dominates the emission for 0.3–2 keV luminosities & 10(exp 43.7) erg/s, ∼ 300 days after the beginning of the event. We discuss possible origins of this event, and speculate that our observations could be explained by the interaction between the accretion flow and debris from a tidally disrupted star. Our results show that changing-look events can be associated with dramatic and rapid transformations of the innermost regions of accreting SMBHs.

C. Ricci↗
NASA NTRS2000

Dominant Presence of Oxygenated Organic Species in the Remote Southern Hemisphere Troposphere

Oxygenated organic species are intimately involved with the fate of nitrogen oxides (NO(sub x)) and hydrogen oxides (HO(sub x)), which are necessary for tropospheric ozone formation. A recent airborne experiment (March-April, 1999) focused over the southern hemisphere (SH) Pacific Ocean (PEM-tropics-B) provided a first opportunity for a detailed characterization of the oxygenated organic composition of the remote southern hemisphere troposphere. Three co-located multi-channel airborne instruments measured a dozen key oxygenated species (carbonyls, alcohols, organic nitrates, organic pernitrates, peroxides) along with a comprehensive suite of C2-C8 Nonmethane hydrocarbons (NMHC). These measurements reveal that in the tropical SH (0-30 deg south), oxygenated chemical abundances are extremely large and collectively are nearly five times those of NMHC. Even in the NH remote atmospheres their burden is equal to or greater than that of NMHC. The relatively uniform global distribution oxygenates (EPSILON Ox-org) is indicative of the presence of large natural and distributed sources. A global 3-D model, reflecting the present state of science, is unable to correctly simulate the atmospheric distribution and variability of several of these species.

Singh, H.↗
NASA NTRS1992

Doubly excited 3P(e) resonant states in Ps(-)

Doubly excited 3P(e) resonant states in Ps(-) are calculated using a method of complex-coordinate rotation. Resonance parameters (both resonance positions and widths) for doubly excited states associated with the n = 2, 3, 4, 5, and 6 thresholds of positronium atoms are evaluated using elaborate Hylleraas-type functions. In addition to ten Feshbach-type resonances lying below various Ps thresholds, three shape resonances were identified, one each lying above the n = 2, 4, and 6 Ps thresholds. It is further noted that the energy levels for the present 3P(e) states are nearly degenerate with respect to the previously calculated 1P(0) states. Such a symmetric character suggests that the highly and doubly excited Ps(-), similar to its counterpart in H(-), would exhibit rovibrational behaviors analogous to those of XYX triatomic molecules.

Ho, Y. K.↗
NASA NTRS1986

Collision strengths for the intercombination lines of S III

The collision strengths of intercombination lines of S III ions observed in the Io torus are calculated on the basis of data gathered by Voyager instruments, the IUE and the Faint Object Telescope. The doubly ionized ions are excited by electron impacts and move from the 3P2P(3) ground state to excited 3s3P3(1)PO, (1)DO, 3p3d(1)PO, and 3p4s(1)PO states. Excitational cross sections are calculated with a two-state close-coupling approximation for the energy range up to 1,000,000 K, with target states being represented by multiconfiguration interaction wave functions. The close-coupling approximation regarded as an accurate technique because of the dominance of the Coulomb factor in the ionized state. The wave function calculations are estimated to yield values accurate to within 30 percent. Further work is need to quantify the magnitude of error introduced by resonance contributions to the collision strengths.

Ho, Y. K.↗
NASA NTRS1991

Inferring the abundances of ClO and HO2 from Spacelab 3 atmospheric trace molecule spectroscopy observations

The vertical distributions of the important highly reactive stratospheric species, ClO and HO2, have been inferred from Spacelab 3 (May 1985) Atmospheric Trace Molecule Spectroscopy (ATMOS) measurements of more detectable radical and reservoir species. A simple steady state algebraic expression for ClO, utilizing the observed ClONO2/NO2 abundance ratio, approximates the ClO results of a time-dependent photochemical model at sunset (30 deg N). Balloon measurements of ClO and comparisons of time-dependent photochemical model calculations of ClONO2 and HCl with the corresponding ATMOS profiles suggest that the actual ClO values are less than the time-dependent model profiles for ClO at sunset and sunrise (47 deg S). Errors in the current model simulation of the partitioning among the principal free chlorine species (HCl, ClONO2, and ClO) are indicated. The accuracy of the time-dependent model calculations of HO2 is suggested by the agreement between model results and ATMOS observations for HO2NO2 and balloon measurements of HO2. This confirms for the first time the procedure suggested previously by a number of authors of deriving HO(x) abundances from observed fields of O3 and H2O.

Allen, Mark↗
NASA NTRS1994

Peroxy radical measurements with NCAR's chemical amplifier

The present NCAR instrument for HO2/RO2 measurements has been described previously. It is based on the reactions involving HO2, RO2, and HO radicals with CO and NO. Since (HO2) + (RO2) + (HO) is much greater than (HO) for most atmospheres, it is useful as a peroxy radical detector. Operation of the instrument depends on the creation of a chemical chain reaction which is initiated as HO2 and RO2 radicals in ambient air encounter added NO gas; this forms an NO2 molecule and an HO or RO radical: HO2(RO2) + NO yields HO(RO) + NO2. RO radicals react relatively efficiently with O2 to form an HO2 radical, and subsequently an HO-radical, by reaction with NO. CO gas added to the reaction chamber during part of the operating cycle, recycles the HO to HO2; HO + CO (+O2) yields HO2 + CO2. The reaction sequence may form several hundred NO2 molecules per HO2 (RO2) originally present, before chain termination occurs. The added CO is replaced by N2 addition periodically so that the chain reaction is suppressed, and a 'blank' signal resulting from NO2, O3 and possibly other NO2-forming species (non-chain processes) in ambient air is recorded. The difference between the signal with and without CO is proportional to the peroxy radical concentration. The NO2 produced is monitored using a sensitive luminol chemiluminescence detector system. In the NCAR instrument the length of the amplification chain is determined using a stable source of HO2 radicals (H2O2 thermal decomposition); the ratio of the signal seen with CO present to that with N2 present gives the sensitivity of the instrument to HO2 (molecules of NO2 formed/peroxy radical). The instrument is automated to carry out in hourly repeated cycles: (1) chain length determination; (2) NO2 calibration; and (3) linearity check on the response of signals. One minute averages of signals are normally recorded. The sensitivity of the instrument to detect peroxy radicals is in the pptv range. The present instrument has operated continuously (24 hr/day) in the field studies which extended over a period of several weeks. The major advantages of this instrument are as follows: (1) its relative simplicity; (2) low power requirements; and (3) its rapid response to all types of peroxy radicals--HO2, CH3O2 and the higher alkyl and acyl peroxy radicals; however not all RO2 species generate HO2 radicals with perfect efficiency and hence have somewhat lower response/molecule than HO2 radicals.

Cantrell, Christopher↗
NASA NTRS1993

HW Virginis - A short period eclipsing binary containing an sdB star

Simultaneous photometry of the binary star HW Vir, a detached system with an orbital period of 2 h 48 min is described. The new UBVR light curves obtained using the Wilson-Devinney code are found to constrain the orbital inclination of the system within the narrow range of 80.6 +/-0.2 deg. The temperature of the primary star is between 29,000 and 36,000 K, and the temperature of the secondary star is near 3,700 K. The possible masses and radii of the two stars are calculated using the published amplitude of the radial velocity curve of the primary star, 87.9 +/-4.8 km/s. It is found that, for the primary star log g1 is greater than 4.8 and less than or equal to 5.8. From the temperature and gravity of the primary star, its distance is found to be in the range between 42 and 151 pc. It is suggested that the system will begin mass transfer when the orbital period has decreased enough to bring the secondary star into contact with its Roche lobe.

Wood, Janet H.↗
NASA NTRS2003

Simulation System for Training in Laparoscopic Surgery

A computer-based simulation system creates a visual and haptic virtual environment for training a medical practitioner in laparoscopic surgery. Heretofore, it has been common practice to perform training in partial laparoscopic surgical procedures by use of a laparoscopic training box that encloses a pair of laparoscopic tools, objects to be manipulated by the tools, and an endoscopic video camera. However, the surgical procedures simulated by use of a training box are usually poor imitations of the actual ones. The present computer-based system improves training by presenting a more realistic simulated environment to the trainee. The system includes a computer monitor that displays a real-time image of the affected interior region of the patient, showing laparoscopic instruments interacting with organs and tissues, as would be viewed by use of an endoscopic video camera and displayed to a surgeon during a laparoscopic operation. The system also includes laparoscopic tools that the trainee manipulates while observing the image on the computer monitor (see figure). The instrumentation on the tools consists of (1) position and orientation sensors that provide input data for the simulation and (2) actuators that provide force feedback to simulate the contact forces between the tools and tissues. The simulation software includes components that model the geometries of surgical tools, components that model the geometries and physical behaviors of soft tissues, and components that detect collisions between them. Using the measured positions and orientations of the tools, the software detects whether they are in contact with tissues. In the event of contact, the deformations of the tissues and contact forces are computed by use of the geometric and physical models. The image on the computer screen shows tissues deformed accordingly, while the actuators apply the corresponding forces to the distal ends of the tools. For the purpose of demonstration, the system has been set up to simulate the insertion of a flexible catheter in a bile duct. [As thus configured, the system can also be used to simulate other endoscopic procedures (e.g., bronchoscopy and colonoscopy) that include the insertion of flexible tubes into flexible ducts.] A hybrid approach has been followed in developing the software for real-time simulation of the visual and haptic interactions (1) between forceps and the catheter, (2) between the forceps and the duct, and (3) between the catheter and the duct. The deformations of the duct are simulated by finite-element and modalanalysis procedures, using only the most significant vibration modes of the duct for computing deformations and interaction forces. The catheter is modeled as a set of virtual particles uniformly distributed along the center line of the catheter and connected to each other via linear and torsional springs and damping elements. The interactions between the forceps and the duct as well as the catheter are simulated by use of a ray-based haptic-interaction- simulating technique in which the forceps are modeled as connected line segments.

Basdogan, Cagatay↗
NASA NTRS2016

Effects of Transparency on Pilot Trust and Agreement in the Autonomous Constrained Flight Planner

We performed a human-in-the-loop study to explore the role of transparency in engendering trust and reliance within highly automated systems. Specifically, we examined how transparency impacts trust in and reliance upon the Autonomous Constrained Flight Planner (ACFP), a critical automated system being developed as part of NASA's Reduced Crew Operations (RCO) Concept. The ACFP is designed to provide an enhanced ground operator, termed a super dispatcher, with recommended diversions for aircraft when their primary destinations are unavailable. In the current study, 12 commercial transport rated pilots who played the role of super dispatchers were given six time-pressured all land scenarios where they needed to use the ACFP to determine diversions for multiple aircraft. Two factors were manipulated. The primary factor was level of transparency. In low transparency scenarios the pilots were given a recommended airport and runway, plus basic information about the weather conditions, the aircraft types, and the airport and runway characteristics at that and other airports. In moderate transparency scenarios the pilots were also given a risk evaluation for the recommended airport, and for the other airports if they requested it. In the high transparency scenario additional information including the reasoning for the risk evaluations was made available to the pilots. The secondary factor was level of risk, either high or low. For high-risk aircraft, all potential diversions were rated as highly risky, with the ACFP giving the best option for a bad situation. For low-risk aircraft the ACFP found only low-risk options for the pilot. Both subjective and objective measures were collected, including rated trust, whether the pilots checked the validity of the automation recommendation, and whether the pilots eventually flew to the recommended diversion airport. Key results show that: 1) Pilots trust increased with higher levels of transparency, 2) Pilots were more likely to verify ACFPs recommendations with low levels of transparency and when risk was high, 3) Pilots were more likely to explore other options from the ACFP in low transparency conditions and when risk was high, and 4) Pilots decision to accept or reject ACFPs recommendations increased as a function of the transparency in the explanation. The finding that higher levels of transparency was coupled with higher levels of trust, a lower need to verify other options, and higher levels of agreement with ACFP recommendations, confirms the importance of transparency in aiding reliance on automated recommendations. Additional analyses of qualitative data gathered from subjects through surveys and during debriefing interviews also provided the basis for new design recommendations for the ACFP.

trust↗
NASA NTRS1983

Oscillator strengths for OII ions

Oscillator strengths between various doublet states of OII ions are calculated in which extensive multi-configuration wave functions are used. The lower levels for the transitions are of the 2p(3) D(2)o and 2p(3) 2po states, and the upper levels are 2p(4), 3s, and 3d states. The results, which are estimated to have errors of less than 10% for individual transitions, agree quite well with the beam foil experiments, as well as with the calculations by use of the non-closed shell many electron theory (NCMET). The agreement with the rocket measurements is also good except for the 538/581 A pair, in which the 538 A line is believed to be blend with the other stronger quartet line. However, a comparison with the recent branching ratio measurement indicates that discrepances between the present calculation and th experiment do exist for certain transistions.

Ho, Y. K.↗
NASA NTRS1984

Oscillator strengths for O(II) ions

Oscillator strengths between various doublet states of OII ions are calculated in which extensive multi-configuration wave functions are used. The lower levels for the transitions are of the 2p(3) D(2)o and 2p(3) 2po states, and the upper levels are 2p(4), 3s, and 3d states. The results, which are estimated to have errors of less than 10 percent for individual transitions, agree quite well with the beam foil experiments, as well as with the calculations by use of the non-closed shell many-electron theory (NCMET). The agreement with the rocket measurements is also good except for the 538/581 A pair, in which the 538 A line is believed to blend with the other stronger quartet line. However, a comparison with the recent branching ratio measurement indicates that discrepancies between the present calculation and the experiment do exist for certain transitions.

Ho, Y. K.↗
NASA NTRS2003

Detection of Pulsed X-Ray Emission from XMM-Newton Observations of PSR J0538+2817

We report on the XMM-Newton observations of the 143 ms pulsar PSR J0538+2817. We present evidence for the first detections of pulsed X-rays from the source at a frequency that is consistent with the predicted radio frequency. The pulse profile is broad and asymmetric, with a pulse fraction of 18% +/- 3%. We find that the spectrum of the source is well-fitted with a blackbody with T(sup infinity) = (2.12 (sup +0.04) (sub -0.03)) x 10(exp 6) K and N(sub H) = 2.5 x 10(exp 2)/sq cm. The radius determined from the model fit of 1.68 +/- 0.05 km suggests that the emission is from a heated polar cap. A fit to the spectra with an atmospheric model reduces the inferred temperature and, hence, increases the radius of the emitting region; however, the pulsar distance determined from the fit is then smaller than the dispersion distance.

McGowan, K. E.↗
NASA NTRS2002

A Desorbed Gas Molecular Ionization Mechanism for Arcing Onset in Solar Arrays Immersed in a Low-Density Plasma

Previous experimental studies have hypothesized that the onset of Solar Array Arc (SAA) initiation in low-density space plasmas is caused by a desorbed gas molecular ionization mechanism. Indeed past investigations performed at the NASA Glenn Plasma Interaction Facility tend to not only support the desorbed gas molecular ionization mechanism, but have gone as far as identifying the crucial molecular species that must be present for molecular ion dominated process to occur. When electrical breakdown occurs at a triple junction site on a solar array panel, a quasi-neutral plasma cloud is ejected. Assuming the main component of the expelled plasma cloud by weight is due to water vapor, the fastest process available is due to HO molecules and OH(+) ions, or more succinctly, dissociative molecular-ion dominated recombination processes: H2O(+) + e(-) yields H* + OH*. Recently published spectroscopic observations of solar array arc spectra in ground tests have revealed the well-known molecular OH band (302 to 309nm), as well as the molecular SiH band (387nm peak), and the molecular CH band (432nm peak). Note that the OH band is observed in emission arcs where water vapor is present. Strong atomic lines were also observed for H(sub beta) at 486nm and H(sub alpha) at 656.3nm in prior ground testing. Independent supporting evidence of desorbed gas molecular ionization mechanisms also come from measurements of arc current pulse widths at different capacitances. We will revisit an earlier first order approximation demonstrating the dependence of arc current pulse widths on the square root of the capacitance. The simple arc current pulse width model will be then be used to estimate the temperature of the arc plasma (currently believed to be somewhere in the range of 3 to 5 eV). The current paper then seeks to extend the outlined work by including numerous vacuum chamber measurements obtained with a quadrupole mass spectrometer. A small solar array was mounted inside the vacuum chamber. A plasma source, also mounted inside the vacuum chamber, is used to simulate a low-density plasma environment. The solar array is then biased to a high negative potential and allowed to arc while a mass spectrometer is used to record the partial pressure of H2O and to track other significant changes in mass (1 to 150) AMU.

Galofaro, J.↗
NASA NTRS1998

Thermal Effects Modeling Developed for Smart Structures

Applying smart materials in aeropropulsion systems may improve the performance of aircraft engines through a variety of vibration, noise, and shape-control applications. To facilitate the experimental characterization of these smart structures, researchers have been focusing on developing analytical models to account for the coupled mechanical, electrical, and thermal response of these materials. One focus of current research efforts has been directed toward incorporating a comprehensive thermal analysis modeling capability. Typically, temperature affects the behavior of smart materials by three distinct mechanisms: Induction of thermal strains because of coefficient of thermal expansion mismatch 1. Pyroelectric effects on the piezoelectric elements; 2. Temperature-dependent changes in material properties; and 3. Previous analytical models only investigated the first two thermal effects mechanisms. However, since the material properties of piezoelectric materials generally vary greatly with temperature (see the graph), incorporating temperature-dependent material properties will significantly affect the structural deflections, sensory voltages, and stresses. Thus, the current analytical model captures thermal effects arising from all three mechanisms through thermopiezoelectric constitutive equations. These constitutive equations were incorporated into a layerwise laminate theory with the inherent capability to model both the active and sensory response of smart structures in thermal environments. Corresponding finite element equations were formulated and implemented for both the beam and plate elements to provide a comprehensive thermal effects modeling capability.

Lee, Ho-Jun↗
NASA NTRS2010

EPR Imaging at a Few Megahertz Using SQUID Detectors

An apparatus being developed for electron paramagnetic resonance (EPR) imaging operates in the resonance-frequency range of about 1 to 2 MHz well below the microwave frequencies used in conventional EPR. Until now, in order to obtain sufficient signal-to-noise radios (SNRs) in conventional EPR, it has been necessary to place both detectors and objects to be imaged inside resonant microwave cavities. EPR imaging has much in common with magnetic resonance imaging (MRI), which is described briefly in the immediately preceding article. In EPR imaging as in MRI, one applies a magnetic pulse to make magnetic moments (in this case, of electrons) precess in an applied magnetic field having a known gradient. The magnetic moments precess at a resonance frequency proportional to the strength of the local magnetic field. One detects the decaying resonance-frequency magnetic- field component associated with the precession. Position is encoded by use of the known relationship between the resonance frequency and the position dependence of the magnetic field. EPR imaging has recently been recognized as an important tool for non-invasive, in vivo imaging of free radicals and reduction/oxidization metabolism. However, for in vivo EPR imaging of humans and large animals, the conventional approach is not suitable because (1) it is difficult to design and construct resonant cavities large enough and having the required shapes; (2) motion, including respiration and heartbeat, can alter the resonance frequency; and (3) most microwave energy is absorbed in the first few centimeters of tissue depth, thereby potentially endangering the subject and making it impossible to obtain adequate signal strength for imaging at greater depth. To obtain greater penetration depth, prevent injury to the subject, and avoid the difficulties associated with resonant cavities, it is necessary to use lower resonance frequencies. An additional advantage of using lower resonance frequencies is that one can use weaker applied magnetic fields: For example, for a resonance frequency of 1.4 MHz, one needs a magnetic flux density of 0.5 Gauss approximately the flux density of the natural magnetic field of the Earth.

Hahn, Inseob↗
NASA NTRS2010

Modeling of the Magnetosphere of Mercury at the Time of the First MESSENGER Flyby

The MESSENGER spacecraft flyby of Mercury on 14 January 2008 provided a new opportunity to study the intrinsic magnetic field of the innermost planet and its interaction with the solar wind, The model presented in this paper is based on the solution of the three-dimensional, bi-f1uid equations for solar wind protons and electrons in the absence of mass loading, In this study we provide new estimates of Mercury's intrinsic magnetic field and the solar wind conditions that prevailed at the time of the flyby. We show that the location of the boundary layers and the strength of the magnetic field along the spacecraft trajectory can be reproduced with a solar wind ram pressure P(sub sw) = 6.8 nPa and a planetary magnetic dipole having a magnitude of 210 R(sub M)(exp 3)- nT and an offset of 0.18 R(sub M) to the north of the equator, where R(sub M) is Mercury's radius. Analysis of the plasma flow reveals the existence of a stable drift belt around the planet; such a belt can account for the locations of diamagnetic decreases observed by the MESSENGER Magnetometer. Moreover, we determine that the ion impact rate at the n011hern cusp was four times higher than at the southern cusp, a result that provides a possible explanation for the observed north-south asymmetry in exospheric sodium in the neutral tail.

Benna, Mehdi↗