Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FALLOUT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Tropical Cyclone Wind Shear-Relative Asymmetry in Reanalyses

Abstract While tropical cyclones (TCs) are axisymmetric vortices to the first order, they often exhibit noteworthy structural asymmetries. These often result from environmental vertical wind shear, which tilts the vortex and induces a wavenumber 1 pattern in the circulation and precipitation fields. Reanalyses and climate models have improved in representing the TC structure and climatology, but their relatively coarse resolution and dependence on parameterized physics cast doubt on their ability to capture the asymmetric TC structure. We perform the most comprehensive process-oriented assessment of TC asymmetry to date in reanalyses. Specifically, we analyze the composite shear-relative TC structure in ERA5 and Climate Forecast System Reanalysis (CFSR), which vary in their resolutions, physical parameterization suites, and data assimilation techniques. These structures are compared with aircraft reconnaissance radar observations. In agreement with the observations, the strongest tangential winds are usually found left-of-shear, while inner core rainfall, ascent, vortex tilt, and low-level inflow are favored directly downshear or in the downshear-left quadrant. Outer rainband convection generally peaks in the downshear-right quadrant. Thermodynamic asymmetries are also apparent, with anomalous low-level moisture right-of-shear, midlevel warmth in the upshear-right quadrant (uptilt), and cloud properties suggestive of a realistic precipitation life cycle from growth to fallout. We also decompose rainfall contributions from the convective parameterization and large-scale cloud schemes and highlight the roles of vorticity advection, buoyancy advection, and diabatic processes in driving asymmetric vertical motions in the inner core and outer rainband regions. Our results suggest that process-level studies of TC asymmetry and TC–wind shear interaction under future warming are viable using climate models. Significance Statement Asymmetries are common in tropical cyclones (TCs), influencing their intensity, track, and hazards. Vertical wind shear often plays a leading-order role in causing these asymmetries. It is uncertain how well asymmetric structures and processes are captured in reanalyses and global climate models (GCMs) with grid spacings of 0.25° and coarser. In this study, we first evaluate TC asymmetry in reanalyses, which have the benefit of being forced by observations. This helps to assess whether the resolutions associated with GCMs sufficiently capture asymmetric structures and processes and motivates upcoming work with free-running GCMs to study how TC asymmetry may change in a warming climate.

Carstens, Jacob D.↗

Improvised Nuclear Device Response Training Materials

Nuclear terrorism is a very real threat to the American people. The best way to prepare for, and respond to, terrorist events is to plan for them ahead of time. Research done at Lawrence Livermore National Laboratory (LLNL) has already been conducted on what will happen following the detonation of a low-yield, ground-level nuclear device. Even though this knowledge exists, many cities have not begun to prepare for nuclear terrorism events. This project took the scientific research presentations and publications developed at LLNL and turned them into training materials that use clear language without scientific terminology, and can be easily understood by response personnel. These materials model and analyze the detonation of an Improvised Nuclear Device (IND) in a major metropolitan area. The information contained in these materials explains that survival after the detonation of an IND is possible, and seeks to inform readers on various topics related to the detonation of an IND. Creation of these materials required an understanding of the research behind IND response planning, including building protection factors, radiological fallout, weather patterns and understanding how emergency response happens in an urban environment. The result is a suite of training modules for instructors and students: Fallout, Prompt Effects, Response and Shelter-Evacuation Strategies. These modules are designed so that they may be taught as a combined, full course, or taken as individual modules. Upon completion of an individual module, or the entire set, a person will have a greater understanding, and increased background knowledge, on topics related to a small-scale nuclear attack. These training modules are intended to give an overview of topics necessary to understand what will happen after detonation of an IND and provide suggestions and strategies for response and evacuation. They are not intended to provide a substitute to local, regional, state and national response planning for a nuclear attack. These guides were designed with the intent to act as guidelines and starting points for further extensive planning by all levels of government. By gaining an overview of IND related topics, there is a hope that response planning officials will realize the importance of planning as well as the survivability of such an event with proper planning.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Task 4 Improvised Nuclear Device Response Curves

LLNL performed fallout and nuclear blast modeling for the 60 cities using the NARAC modeling system and predominant weather patterns determined in a previous Task 4 effort. LLNL performed model simulations and analyses to identify and provide response curves (expressed as two-dimensional contours) for radioactive fallout deposition, transport, population, and blast overpressure as a function of yield, weather, location and time. These contours can then be further combined and correlated with infrastructure and population databases to estimate city specific effects on KPFs such as impacted infrastructure and casualty rates.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Rapid Radiological/Nuclear Consequence Assessment Tools

The goal of this work is to design a tool for rapid assessment of the areas impacted by airborne plumes and fallout from a radiological/nuclear incident, such as an Improvised Nuclear Device (IND) detonation or Radiological Dispersal Device (RDD) release, for use by state and local technical specialists and emergency responders. The tool would produce information on the distances and areas near an incident location in which hazards may exist. This would inform consequence management decisions by state and local responders in the critical minutes following an event, as well as assist in emergency planning before an incident. The products would be intended for use before more detailed products are available from non-local assets, such as the federal Interagency Modeling and Atmospheric Assessment Center (IMAAC) and the Federal Radiological Monitoring and Assessment Center (FRMAC). The tool’s products could provide, for example, predictions of damage zones and dangerous fallout areas to help guide the emergency response, including protection of emergency responders and the public. The initial focus of this effort is on the more difficult IND decision support tools. Existing HAZMAT tools and RDD guidance, described in this report, can also be integrated into the decision support tool.

61 RADIATION PROTECTION AND DOSIMETRY↗

Distances to Prompt Effects for a Nuclear Device

In 2010, nuclear weapon effects experts at Sandia National Laboratories (SNL) were asked to provide a quick reference document containing estimated prompt nuclear effects. This report is an update to the 2010 document that includes updated model assumptions. This report addresses only the prompt effects associated with a nuclear detonation (e.g., blast, thermal fluence, and prompt ionizing radiation). The potential medium- and longer-term health effects associated with nuclear fallout are not considered in this report because, in part, of the impracticality of making generic estimates given the high dependency of fallout predictions on the local meteorological conditions at the time of the event. The results included in this report also do not consider the urban environment (e.g., shielding by or collapse of structures) which may affect the extent of prompt effects. It is important to note that any operational recommendations made using the estimates in this report are limited by the generic assumptions considered in the analysis and should not replace analyses made for a specific scenario/device. Furthermore, nuclear effects experts (John Hogan, SNL, and Byron Ristvet, Defense Threat Reduction Agency (DTRA)) have indicated that the accuracy of effects predictions below 0.5 kilotons (kT) or 500 tons nuclear yield have greater uncertainty because of the limited data available for the prompt effects in this regime. The Specialized Hazard Assessment Response Capability (SHARC) effects prediction tool was used for these analyses. Specifically, the NUKE model within SHARC 2021 Version 10.2 was used. NUKE models only the prompt effects following a nuclear detonation. The algorithms for predicting range-to-output data contained within the NUKE model are primarily based on nuclear test effects data. Probits have been derived from nuclear test data and the U.S. Environmental Protection Agency (EPA) protective action guides. Probits relate the probability of a hazard (e.g., fatality or injury) caused by a given insult (e.g., overpressure, thermal fluence, dose level). Several probits have been built into SHARC to determine the fatality and injury associated with a given level of insult. Some of these probits differ with varying yield. Such probits were used to develop the tables and plots in this report.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Mathematical estimation of the level of microbial contamination on spacecraft surfaces by volumetric air sampling

Microbiological sampling methods presently used for enumeration of microorganisms on spacecraft surfaces require contact with easily damaged components. Estimation of viable particles on surfaces using air sampling methods in conjunction with a mathematical model would be desirable. Parameters necessary for the mathematical model are the effect of angled surfaces on viable particle collection and the number of viable cells per viable particle. Deposition of viable particles on angled surfaces closely followed a cosine function, and the number of viable cells per viable particle was consistent with a Poisson distribution. Other parameters considered by the mathematical model included deposition rate and fractional removal per unit time. A close nonlinear correlation between volumetric air sampling and airborne fallout on surfaces was established with all fallout data points falling within the 95% confidence limits as determined by the mathematical model.

Oxborrow, G. S.↗

Organic matter in eolian dusts over the Atlantic Ocean

The elemental and mineralogical composition and the microfossil and detritus content of particulate fallout from the lower troposphere over the Atlantic Ocean have been extensively documented in earlier work, and it was possible to ascribe terrigenous source areas to such fallout. A brief review of the organic geochemistry of eolian dusts is also presented here. The lipids of eolian dusts sampled from the air mass over the eastern Atlantic from about 35 deg N to 30 deg S were analyzed here. These lipids consisted mainly of normal alkanes, carboxylic acids and alcohols. The n-alkanes were found to range from n-C23 to n-C35 with high CPI values and maximizing at n-C27 in the North Atlantic, at n-C29 in the equatorial Atlantic and at n-C31 in the South Atlantic. The n-fatty acids had mostly bimodal distributions, ranging from n-C12 to n-C30 (high CPI), with maxima at n-C16 and in the northern samples at n-C24 and in the southern samples at n-C26. The n-alcohols ranged from n-C12 to n-C32, with high CPI values and maxima mainly at n-C28. The compositions of these lipids indicated that their terrigenous sources were comprised mainly of higher plant vegetation and desiccated lacustrine mud flats on the African continent.

Simoneit, B. R. T.↗

Space shuttle exhaust cloud properties

A data base describing the properties of the exhaust cloud produced by the launch of the Space Transportation System and the acidic fallout observed after each of the first four launches was assembled from a series of ground and aircraft based measurements made during the launches of STS 2, 3, and 4. Additional data were obtained from ground-based measurements during firings of the 6.4 percent model of the Solid Rocket Booster at the Marshall Center. Analysis indicates that the acidic fallout is produced by atomization of the deluge water spray by the rocket exhaust on the pad followed by rapid scavening of hydrogen chloride gas aluminum oxide particles from the Solid Rocket Boosters. The atomized spray is carried aloft by updrafts created by the hot exhaust and deposited down wind. Aircraft measurements in the STS-3 ground cloud showed an insignificant number of ice nuclei. Although no measurements were made in the column cloud, the possibility of inadvertent weather modification caused by the interaction of ice nuclei with natural clouds appears remote.

Anderson, B. J.↗

Environmental effects of Shuttle launch and landing

The areas of concern were the toxic exhaust cloud produced by Shuttle launch, the effect of launch operations on the total ecology, and the sonic boom produced by Orbiter re-entry. Wet acidic dust fell from the exhaust cloud for about ten minutes after launch. The fallout was not entirely unexpected, but the intensity and duration was larger than anticipated. The fallout material is not considered a significant health hazard. Previously announced in STAR as N82-15729

Potter, A. E.↗

Hydrogen chloride and aerosol ground cloud characteristics resulting from Space Shuttle launches

Airborne measurements of gaseous HCl, gaseous and aerosol HCl, particulates, relative humidity and temperature were obtained in ground clouds produced during three Space Shuttle launches. Partitioning of HCl between HCl aerosol and gaseous HCl was investigated as the solid rocket exhaust cloud diluted with ambient air to evaluate the conditions under which aerosol formation occurs in the troposphere in the presence of hygroscopic HCl vapor. Equilibrium predictions for aqueous HCl aerosol formation generally agree with the measured HCl partitioning over HCl concentrations from 0.5 to 36 ppm. HCl concentration dispersion within four cloud segments at time t (min) was evaluated using the expression C = C(0) (t to the alpha power) where C(0) varied from 145 to 2250 ppm and alpha varied from -1.14 to -1.73. Aerosol fallout from the exhaust clouds was measured with time by monitoring HCl concentrations and aerosol distributions 100 m below the cloud as it drifted away from the launch site. Significant amounts of HCl were found to be removed by fallout of particles in the 80-220 micron diameter range up to 30 min after launch.

Sebacher, D. I.↗

Stratigraphy and sedimentology of the K/T boundary deposit in Haiti

The K/T boundary sequence is exposed in uplifted carbonate sediments of the southwest peninsula of Haiti. It is found at 15 localities within the Beloc formation, a sequence of limestone and marls interpreted as a monoclinal nappe structure thrust to the north. This tectonic deformation has affected the K/T boundary deposit to varying degrees. In some cases the less competent K/T deposit has acted as a slip plane leading to extensive shearing of the boundary layer, as well as duplication of the section. The presence of glassy tektites, shocked quartz, and an Ir anomaly directly link the deposit to a bolide impact. Stratigraphic and sedimentological features of the tripartite sequence indicate that it was formed by deposition from ballistic fallout of coarse tektites, emplacement of particle gravity flows and fine grained fallout of widely dispersed impact ejecta.

Carey, S.↗

Aseptic Handling of the MOMA Mass Spectrometer After Dry Heat Microbial Reduction

Mars Organic Molecule Analyzer Mass Spectrometer (MOMA-MS) is an instrument in the larger MOMA instrument suite for the European Space Agency (ESA) ExoMars 2020 Rover. As a life-detection instrument on a Mars landing mission, MOMA-MS has very stringent Planetary Protection (PP) bioburden requirements. Within the MOMA instrument suite, the hardware surfaces of the sample path must be cleaned to a level of 0.03 spore/sq m. To meet this requirement, a process called Dry Heat Microbial Reduction (DHMR) is used to decrease the number of viable spores by 4 orders of magnitude. Before DHMR, the hardware is handled using standard cleanroom practices, while after DHMR, all sample path surfaces must be handled aseptically when exposed. Aseptic handling of the sample path involves a number of strategies and protocols including working only in an aseptic ISO class 5 work space, limiting the amount of time of exposure, using sterile garmenting with sterile gloves, and using sterile tools. Before work begins, the aseptic workspace will be tested for bioburden and particle fallout, and all tools that will contact sample path surfaces must be sterilized. During the exposure activity, sterile garments will be worn, sterile tools will be handled in a 2 person set up so that the operator touches only the sterile tool and not the exterior surfaces of the sterile pouch, and the environment will be monitored with active and passive fallout for bioburden and particle levels. Any breach in the planetary protection cleanliness can necessitate repeating DHMR, which not only has significant cost and schedule implications, it also become a risk to hardware that is not rated for repeated long exposures to high temperatures.

Life Detection↗

Development and Implementation of Aseptic Operations for the MOMA-Mass Spectrometer

The ExoMars 2020 Rover is a life detection mission, and is classified as Planetary Protection (PP) Mission Category IVb, the first IVb mission since the Viking missions. Mars Organic Molecule Analyzer Mass Spectrometer (MOMA-MS) is a life detection instrument for the rover. To meet the stringent bioburden requirement of 0.03 spore/m2, the MS is subjected to Dry Heat Microbial Reduction (DHMR) to decrease the bioburden from a measured 88 spores/m2 to 0.009 spores/m2. After DHMR, exposure of the sample path must be kept to an absolute minimum and requires aseptic operations. Aseptic operations include determining the safe exposure time based on the surface area of exposure and particle fallout expected in the aseptic ISO class 5 workspace, preparing an aseptic ISO class 5 workspace, and using sterile garments and tools. During the exposure activity the environment is monitored with active and passive fallout for bioburden and real time airborne particle counts. Sterile tools are handled by a two person team so the operator touches only the tool and not the exterior surfaces of the sterilization pouch, and a sterile operating field is established as a safe place to organize tools or parts during the aseptic operations. In cases where aseptic operations are not feasible, localized DHMR is used after exposure. Any breach in the PP cleanliness can necessitate repeating instrument level DHMR, which not only has significant cost and schedule implications, but also is a risk to hardware that is not rated for repeated long exposures to high temperatures.

Aseptic processing↗

Cleanroom Contamination Identification Method Development

During fabrication, assembly, and testing of spacecraft and flight hardware it is vital to avoid contaminants that can cause degradation and could result in significant failure. Yet, there is no existing contamination monitoring method that provides the identity of airborne particles in a cleanroom facility. Knowing the particle identities, would allow scientists and engineers to determine the source of the contaminants and prevent setbacks before they occur or cause damage. Current cleanliness monitoring methods include airborne particle counters (APCs), fallout filters, and visual inspections. Particle counts from APCs are the primary metric used to define a cleanroom class and hence its level of cleanliness, but do not provide identification nor can they differentiate between large and small sizes of particles. In addition, using fallout filters is not a proactive, timely, or representative approach to cleanroom contamination monitoring because these samples are only retrieved after 30 days and are placed away from spacecraft processing to avoid interference with operations. In contrast, the forced air sampling method can collect a sample within an hour at any location required and provide results in less than a day. This system uses a cassette and filter sample medium to capture airborne particles which are then taken to a scanning electron microscope with energy dispersive spectroscopy (SEM/EDS) to identify and size the captured particles. Development of forced air sampling into an established laboratory capability will allow for fast sampling and routine identification of unknown contamination sources within the cleanroom. The test method development required market research for an air sampling cassette that increases sample collection efficiency and a filter with low enough background contamination to allow differentiation between a blank (control) and the collected sample. It was determined that a conductive black cassette and a polycarbonate filter were the best options. Conductive black cassettes, in comparison to the standard styrene, are manufactured using polypropylene filled with carbon. This makes the cassette conductive and minimizes the tendency of particles to stick to the wall of the cassette due to electrostatic force. In previous trials a mixed cellulose ester (MCE) filter was used to capture the contaminants, however the rougher surface of the filter contributed to entrapment of the particles within the filter structure and made it harder to identify the particles. In comparison, track etched polycarbonate filters have random cylindrical pores and a smooth surface which contributes to uniform sample distribution on the surface of the filter. Future work includes: testing the system using control samples to determine the efficiency and suitability of the medium, performing sample collection in various environments to establish ideal operating parameters and analyzing contaminant particles using SEM/EDS and assistant characterization techniques. Once fully developed, employing the forced air sampling method will help to prevent damage to spacecraft, avoid schedule delays, and allow for mission success.

Hernandez Melendez, Jailyn M.↗

Predicting contamination accumulation in facilities with limited data

"In preparation for the James Webb Space Telescope (JWST) launch at Centre Spatial Guyanias (CSG) in French Guiana, particulate contamination accumulation predictions were necessary for each facility in which the hardware would be exposed because the Telescope would be uncovered in each of the facilities and had strict particulate requirements. These included facilities for final integration and testing, fueling, transportation and encapsulation. Minimal heritage data existed from CSG and previous launch campaigns to use as a basis for contamination predictions. Data from the Automatic Transfer Vehicle and Herschel & Planck launch campaigns were used in conjunction with facility monitoring data provided by ESA and data collected during JWST working group visits to CSG. These campaigns were conducted at varying cleanliness levels that were typically less stringent than JWST requirements. Each facility was evaluated using the data provided and likely performance improvement with the addition of High Efficiency Particulate Air filter (HEPA) banks operating when possible. Once the launch campaign was completed, the predicted fallout was compared with actual data collected throughout the campaign. Based on the actual measurements, JWST’s primary and secondary mirrors are likely much cleaner than was expected with the predicted fallout in each facility. "

James Webb Space Telescope, contamination, cleanro↗

Summary of Building Protection Factor Studies for External Exposure to Ionizing Radiation

Radiation dose assessments are used to help inform decisions to minimize health risks in the event of an atmospheric release of radioactivity including, for example, from a Radiological Dispersal Device, an Improvised Nuclear Device detonation, or a Nuclear Power Plant accident. During these incidents, radiation dose assessments for both indoor and outdoor populations are needed to make informed decisions. These dose assessments inform emergency plans and decisions including, for example, identifying areas in which people should be sheltered and determining when controlled population evacuations should be made. US dose assessment methodologies allow consideration of the protection, and therefore dose reduction, that buildings provide their occupants. However, these methodologies require an understanding of the protection provided by various building types that is currently lacking. To help address this need, Lawrence Livermore National Laboratory, in cooperation with Sandia National Laboratories and the Nuclear Regulatory Commission, was tasked with (a) identifying prior building protection studies, (b) extracting results relevant to US building construction, and (c) summarizing building protection by building type. This report focuses primarily on the protection against radiation from outdoor fallout particles (external gamma radiation).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Measurements of plutonium, 237 Np, and 137 Cs in the BCR 482 lichen reference material

Select anthropogenic radionuclides were measured in lichen reference material, BCR 482. This material was originally collected in Axalp, Switzerland in 1991 and is composed of the epiphytic lichen Pseudevernia furfuracea . Samples from three separate bottles of BCR 482 were analyzed for uranium, neptunium, and plutonium isotopes by inductively coupled plasma mass spectrometry (ICP-MS) and analyzed for cesium-137 by gamma-ray spectrometry. The isotopic composition of the radionuclides measured in BCR 482 suggests contributions from both global fallout resulting from historical nuclear weapons testing and more volatile materials released following the Chernobyl accident.

54 ENVIRONMENTAL SCIENCES↗

Information technology and innovative drainage management practices for selenium load reduction from irrigated agriculture to provide stakeholder assurances and meet contaminant mass loading policy objectives

Many perceive the implementation of environmental regulatory policy, especially concerning non-point source pollution from irrigated agriculture, as being less efficient in the United States than in many other countries. This is partly a result of the stakeholder involvement process but is also a reflection of the inability to make effective use of Environmental Decision Support Systems (EDSS) to facilitate technical information exchange with stakeholders and to provide a forum for innovative ideas for controlling non-point source pollutant loading. This paper describes one of the success stories where a standardized Environmental Protection Agency (EPA) methodology was modified to better suit regulation of a trace element in agricultural subsurface drainage and information technology was developed to help guide stakeholders, provide assurances to the public and encourage innovation while improving compliance with State water quality objectives. The geographic focus of the paper is the western San Joaquin Valley where, in 1985, evapoconcentration of selenium in agricultural subsurface drainage water, diverted into large ponds within a federal wildlife refuge, caused teratogenecity in waterfowl embryos and in other sensitive wildlife species. The fallout from this environmental disaster was a concerted attempt by State and Federal water agencies to regulate non-point source loads of the trace element selenium. The complexity of selenium hydrogeochemistry, the difficulty and expense of selenium concentration monitoring and political discord between agricultural and environmental interests created challenges to the regulation process. Innovative policy and institutional constructs, supported by environmental monitoring and the web-based data management and dissemination systems, provided essential decision support, created opportunities for adaptive management and ultimately contributed to project success. The paper provides a retrospective on the contentious planning process and offers suggestions as to how the technical and institutional issues could have been resolved faster through early adoption of some of the core principles of sound EDSS design.

54 ENVIRONMENTAL SCIENCES↗