Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENSITY OF STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Determination of Multimode Motional Quantum States in a Trapped Ion System

Trapped atomic ions are a versatile platform for studying interactions between spins and bosons by coupling the internal states of the ions to their motion. Measurement of complex motional states with multiple modes is challenging, because all motional state populations can only be measured indirectly through the spin state of ions. Here we present a general method to determine the Fock state distributions and to reconstruct the density matrix of an arbitrary multimode motional state. Further, we experimentally verify the method using different entangled states of multiple radial modes in a five-ion chain. This method can be extended to any system with Jaynes-Cummings-type interactions.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Tetracene Functionalized Si(111) Achieves Enhanced Solar-to-Chemical Energy Conversion via Molecular Acceptor States

The properties of semiconductor|liquid interfaces play a critical role in determining the efficiency of solar-to-hydrogen (STH) conversion. Here, we investigate how molecular functionalization of Si(111) and Si(111)|TiO 2 surfaces impacts photoelectrochemical (PEC) hydrogen production efficiency. We find that functionalization of ∼3% of the atop sites of Si(111) with either 9-anthracene (Anth) or 5-tetracene (Tet), with the remaining sites passivated by methyl groups, provides substrates with high electronic quality and low surface oxide densities, as determined by X-ray photoelectron spectroscopy (XPS) measurements. Surface photovoltage (SPV) spectroscopy shows that surfaces modified with Anth or Tet exhibit an increased photovoltage, with Tet-functionalized surfaces yielding an additional 192 meV relative to methyl-terminated Si(111), indicating improved charge separation for Si-Tet. Further improvement in onset potential was achieved by replacing a nitrogen-containing TiO 2 atomic layer deposition (ALD) precursor (TDMAT) with a precursor lacking nitrogen (TTIP), which eliminates the parasitic defect band in the TiO 2 overlayer (p-Si(111)-Tet|TTIP-TiO 2 |Pt: V OC = +0.283 ± 0.041 V vs RHE). Density functional theory (DFT) analysis demonstrates that compared with Anth-modified Si(111), the Tet-modified surface exhibits more hybridized Si(111)-Tet states closer to the silicon band edges. Mercury contact current–voltage (I–V, dark) measurements quantified the relative interfacial density of states of Si-Tet, Si-Anth and Si-Me surfaces─revealing that the interfacial state density was highest for Si-Tet. This suggests that such hybridized interfaces serve to capture better photoexcited charge, which enables facile electron transfer to molecular acceptors in solution. Altogether, the data indicate that beneficial hybrid molecular LUMO surface states interacting with the Si conduction band edge results in improved hydrogen evolution (HER) performance for p-Si devices.

Group theory↗
DOE OSTI2025

Global phase diagram of D-wave superconductivity in the square-lattice t-J model

The Hubbard and closely related t-J models are exciting platforms for unconventional superconductivity (SC). Through state-of-the-art density matrix renormalization group calculations using the grand canonical ensemble, we address open issues regarding the ground-state phase diagram of the extended t-J model on a square lattice in the parameter regime relevant to cuprate superconductors. On large 8-leg cylinders, we demonstrate that the pure t-J model with only nearest-neighbor hoppings and superexchange interactions, for a wide range of doping ( δ = 0.1 to 0.2 ), hosts robust d-wave superconductivity possibly coexisting with weak unidirectional pair density wave. Furthermore, a small next nearest neighbor hopping t 2 suppresses pair and charge density waves, resulting in a uniform d-wave SC phase in both electron- and hole-doped cuprate model systems. Our work validates the t-J model as a proper minimum model for the emergence of superconductivity in cuprate superconductors.

Chen, Feng (ORCID:000000018196030X)↗
DOE OSTI2021

Directional clogging and phase separation for disk flow through periodic and diluted obstacle arrays

We model collective disk flow though a square array of obstacles as the flow direction is changed relative to the symmetry directions of the array. At lower disk densities there is no clogging for any driving direction, but as the disk density increases, the average disk velocity decreases and develops a drive angle dependence. For certain driving angles, the flow is reduced or drops to zero when the system forms a heterogeneous clogged state consisting of high density clogged regions coexisting with empty regions. The clogged states are fragile and can be unclogged by changing the driving angle. For large obstacle sizes, we find a uniform clogged state that is distinct from the collective clogging regime. Within the clogged phases, depinning transitions can occur as a function of increasing driving force, with intermittent motion appearing just above the depinning threshold. The clogging is robust against the random removal or dilution of the obstacle sites, and the disks are able to form system-spanning clogged clusters even under increasing dilution. If the dilution becomes too large, however, the clogging behavior is lost.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Is the Local Ion Density Sufficient to Drive NaCl Nucleation from the Melt and Aqueous Solution?

Even though nucleation is ubiquitous in different science and engineering problems, investigating nucleation is extremely difficult due to the complicated ranges of time and length scales involved. In this work, we simulate NaCl nucleation in both molten and aqueous environments using enhanced sampling of all-atom molecular dynamics with deep-learning-based estimation of reaction coordinates. By incorporating various structural order parameters and learning the reaction coordinate as a function thereof, we achieve significantly improved sampling relative to traditional ad hoc descriptions of what drives nucleation, particularly in an aqueous medium. Our results reveal a one-step nucleation mechanism in both environments, with reaction coordinate analysis highlighting the importance of local ion density in distinguishing solid and liquid states. However, although fluctuations in the local ion density are necessary to drive nucleation, they are not sufficient. Our analysis shows that near the transition states, descriptors such as enthalpy and local structure become crucial. Furthermore, our protocol proposed here enables robust nucleation analysis and phase sampling and could offer insights into nucleation mechanisms for generic small molecules in different environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Differential charge radii: Proton-neutron interaction effects

The analysis of self-consistency and proton-neutron interaction effects in the buildup of differential charge radii were carried out in covariant density functional theoretical calculations without pairing interaction on the example of selected configurations in the Pb isotopes. The proton-neutron interaction of neutron(s) added to the neutron 𝑁 = 126 core and the protons forming the 𝑍 = 82 proton core is responsible for a major contribution to the buildup of differential charge radii. It depends on the products of proton and neutron wave functions and thus on their nodal structure. This interaction leads to a redistribution of single-particle density of occupied proton states which in turn modifies the charge radii. Furthermore, the microscopic origin of this redistribution and its consequences for differential charge radii were investigated for the first time. Self-consistency effects affecting the shape of proton potential, total proton densities and the energies of the single-particle proton states provide only minor contribution to differential charge radii.

190 ≤ A ≤ 219↗
DOE OSTI2022

Kernel learning backward SDE filter for data assimilation

In this paper, we develop a kernel learning backward SDE filter method to estimate the state of a stochastic dynamical system based on its partial noisy observations. A system of forward backward stochastic differential equations is used to propagate the state of the target dynamical model, and Bayesian inference is applied to incorporate the observational information. Further, to characterize the dynamical model in the entire state space, we introduce a kernel learning method to learn a continuous global approximation for the conditional probability density function of the target state by using discrete approximated density values as training data. Numerical experiments demonstrate that the kernel learning backward SDE is highly effective.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Nuclear cusps and singularities in the nonadditive kinetic potential bifunctional from analytical inversion

The non-additive kinetic potential $v^{\text{NAD}}$ is a key quantity in density-functional theory (DFT) embedding methods, such as frozen density embedding theory and partition DFT. $v^{\text{NAD}}$ is a bi-functional of electron densities $\rho_{\rm B}$ and $\rho_{\rm tot} = \rho_{\rm A} + \rho_{\rm B}$. It can be evaluated using approximate kinetic-energy functionals, but accurate approximations are challenging. The behavior of $v^{\text{NAD}}$ in the vicinity of the nuclei has long been questioned, and singularities were seen in some approximate calculations. In this article, the existence of singularities in $v^{\text{NAD}}$ is analyzed analytically for various choices of $\rho_{\rm B}$ and $\rho_{\rm tot}$, using the nuclear cusp conditions for the density and Kohn-Sham potential. It is shown that no singularities arise from smoothly partitioned ground-state Kohn-Sham densities. We confirm this result by numerical calculations on diatomic test systems HeHe, HeLi$^+$, and H$_2$, using analytical inversion to obtain a numerically exact $v^{\rm NAD}$ for the local density approximation. We examine features of $v^{\rm NAD}$ which can be used for development and testing of approximations to $v^{\rm NAD}[\rho_{\rm B},\rho_{\rm tot}]$ and kinetic-energy functionals.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1996

Photonic Diagnostic Technique For Thin Photoactive Films

Photonic diagnostic technique developed for use in noninvasive, rapid evaluation of thin paraelectric/ferroelectric films. Method proves useful in basic research, on-line monitoring for quality control at any stage of fabrication, and development of novel optoelectronic systems. Used to predict imprint-prone memory cells, and to study time evolution of defects in ferroelectric memories during processing. Plays vital role in enabling high-density ferroelectric memory manufacturing. One potential application lies in use of photoresponse for nondestructive readout of polarization memory states in high-density, high-speed memory devices. In another application, extension of basic concept of method makes possible to develop specially tailored ferrocapacitor to act as programmable detector, wherein remanent polarization used to modulate photoresponse. Large arrays of such detectors useful in optoelectronic processing, computing, and communication.

Thakoor, Sarita↗
NASA NTRS2007

Preliminary Assessment of Artificial Gravity Impacts to Deep-Space Vehicle Design

Even after more than thirty years of scientific investigation, serious concerns regarding human physiological effects of long-duration microgravity exposure remain. These include loss of bone mineral density, skeletal muscle atrophy, and orthostatic hypertension, among others. In particular, "Safe Passage: Astronaut Care for Exploration Missions," states "loss of bone density, which apparently occurs at a rate of 1% per month in microgravity, is relatively manageable on the short-duration missions of the space shuttle, but it becomes problematic on the ISS [International Space Station]. ...If this loss is not mitigated, interplanetary missions will be impossible." While extensive investigations into potential countermeasures are planned on the ISS, the delay in attaining full crew complement and onboard facilities, and the potential for extending crews tours of duty threaten the timely (< 20 years!) accumulation of sufficient data for countermeasures formulation. Indeed, there is no guarantee that even with the data, a practical or sufficiently robust set of countermeasures will be forthcoming. Providing an artificial gravity (AG) environment by crew centrifugation aboard deep-space human exploration vehicles, long a staple technique of science fiction, has received surprisingly limited engineering assessment. This is most likely due to a number of factors: the lack of definitive design requirements, especially acceptable artificial gravity levels and rotation rates, the perception of high vehicle mass and performance penalties, the incompatibility of resulting vehicle configurations with space propulsion options (i.e., aerocapture), the perception of complications associated with de-spun components such as antennae and photovoltaic arrays, and the expectation of effective crew micro-gravity countermeasures. These perception and concerns may have been overstated, or may be acceptable alternatives to countermeasures of limited efficacy. This study was undertaken as an initial step to try to understand the implications of and potential solutions to incorporating artificial gravity in the design of human deep-space exploration vehicles. Of prime interest will be the mass penalties incurred by incorporating AG, along with any mission performance degradation.

Joosten, B. Kent↗
DOE OSTI2020

The Physics of Pair-Density Waves: Cuprate Superconductors and Beyond

Herein we review the physics of pair-density wave (PDW) superconductors. We begin with a macroscopic description that emphasizes order induced by PDW states, such as charge-density wave, and discuss related vestigial states that emerge as a consequence of partial melting of the PDW order. We review and critically discuss the mounting experimental evidence for such PDW order in the cuprate superconductors, the status of the theoretical microscopic description of such order, and the current debate on whether the PDW is a mother order or another competing order in the cuprates. In addition, we give an overview of the weak coupling version of PDW order, Fulde–Ferrell–Larkin–Ovchinnikov states, in the context of cold atom systems, unconventional superconductors, and noncentrosymmetric and Weyl materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1992

Electron-impact vibrational relaxation in high-temperature nitrogen

Vibrational relaxation process of N2 molecules by electron-impact is examined for the future planetary entry environments. Multiple-quantum transitions from excited states to higher/lower states are considered for the electronic ground state of the nitrogen molecule N2 (X 1Sigma-g(+)). Vibrational excitation and deexcitation rate coefficients obtained by computational quantum chemistry are incorporated into the 'diffusion model' to evaluate the time variations of vibrational number densities of each energy state and total vibrational energy. Results show a non-Boltzmann distribution of number densities at the earlier stage of relaxation, which in turn suppresses the equilibrium process but affects little the time variation of total vibrational energy. An approximate rate equation and a corresponding relaxation time from the excited states, compatible with the system of flow conservation equations, are derived. The relaxation time from the excited states indicates the weak dependency of the initial vibrational temperature. The empirical curve-fit formula for the improved e-V relaxation time is obtained.

Lee, Jong-Hun↗
DOE OSTI2022

Ab initio approaches to high-entropy alloys: a comparison of CPA, SQS, and supercell methods

In this work, we present a comparative study of different modeling approaches to the electronic properties of the Hf 0.05 Nb 0.05 Ta 0.8 Ti 0.05 Zr 0.05 high-entropy alloy. Common to our modeling is the methodology to compute the one-particle Green’s function in the framework of density functional theory. We demonstrate that the special quasi-random structures modeling and the supercell, i.e., the locally self-consistent multiple-scattering methods, provide very similar results for the ground state properties such as the spectral function (density of states) and the equilibrium lattice parameter. To reconcile the multiple-scattering single-site coherent potential approximation with the real space supercell methods, we included the effect of screening of the net charges of the alloy components. Based on the analysis of the total energy and spectral functions computed within the density functional theory, we found no signature for the long-range or local magnetic moments formation in the Hf 0.05 Nb 0.05 Ta 0.8 Ti 0.05 Zr 0.05 high-entropy alloy; instead, we find possible superconductivity below ~9K.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultra–fast, selective, non–melting, laser sintering of alumina with anisotropic and size–suppressed grains

In this paper, we report an ultra-fast sintering phenomenon of alumina achieved by the scanning laser irradiation method. Using CO 2 laser irradiation, we found that micrometer-sized alumina powder (d 50 = 1.2 µm) can be sintered close to full density within a few tens of seconds. The microstructure of laser-sintered alumina was different from that of the furnace-sintered alumina. The relative density and grain size of the laser-sintered alumina gradually decreased from the center of the laser beam to the edge. Anisotropy of the grain size was measured along and perpendicular to the scanning direction. This anisotropy decreased as the scanning speed decreased from 0.1 mm/s to 0.01 mm/s. The sintering master curve of grain size versus relative density, which reflects the sintering mechanism, was found to be affected by the laser scanning speed. When the laser scanning speed was 0.1 mm/s, grain size suppression was found for the almost fully dense alumina. However, at lower scanning speed (e.g., 0.01 mm/s), there was significant grain growth in the regions where the relative density was greater than 90%. Furthermore, these results clearly indicate that alumina can be sintered, in the solid-state, to a high density in a short time using scanning laser and the microstructure is different from the furnace-sintered alumina.

08 HYDROGEN↗
DOE OSTI2024

Unconventional Error Cancellation Explains the Success of Hartree–Fock Density Functional Theory for Barrier Heights

Energy barriers, which control the rates of chemical reactions, are seriously underestimated by computationally efficient semilocal approximations for the exchange-correlation energy. The accuracy of a semilocal density functional approximation is strongly boosted for reaction barrier heights by evaluating that approximation non-self-consistently on Hartree–Fock electron densities, which has been known for ~30 years. Here, the conventional explanation is that the Hartree–Fock theory yields the more accurate density. This work presents a benchmark Kohn–Sham inversion of accurate coupled-cluster densities for the reaction H 2 + F → HHF → H + HF and finds a strong, understandable cancellation between positive (excessively overcorrected) density-driven and large negative functional-driven errors (expected from stretched radical bonds in the transition state) within this Hartree–Fock density functional theory. This confirms earlier conclusions (Kaplan, A. D., et al. J. Chem. Theory Comput. 2023, 19, 532–543) based on 76 barrier heights and three less reliable, but less expensive, fully nonlocal density functional proxies for the exact density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

DFT Plus DMFT Study of Spin-Charge-Lattice Coupling in Covalnt LaCoO{siub 3}.

We study energetics and the nature of both homogeneous and mixed spin (MS) states in LaCoO3 incorporating structural changes of the crystal volume expansion and the Co-O bond disproportionation (BD) during the spin-state transition using the density functional theory plus dynamical mean field theory (DFT + DMFT) method. DFT + DMFT predicts that energetics of both excited spin states are almost the same while DFT + U calculations of the same structures energetically favor the MS states and produce various metastable solutions whose energetics depend sensitively on final spin states. Within DFT + DMFT, the homogeneous spin state in the expanded crystal volume shows the multiconfigurational nature with non-negligible occupancy probabilities of both high spin (HS) and low spin (LS) states along with d(6) and d(7) charge configurations indicating the dynamically fluctuating nature of spin and charge states due to the Co-O covalency. The nature of the MS state under the BD structure reveals that Co sites with the long Co-O bonds develop a Mott insulating state and favor HS with a d(6) configuration, while more covalent Co sites with the short Co-O bonds occupy more LS states with a d(7) configuration and behave as a band insulator, as a result, charge ordering is induced in the BD structure from the spin-state ordering. We also find that both energetics and electronic structure sensitively depend on the Co-O covalency effect, which can be tuned by changing the double counting potential and the resulting d occupancy (N-d), and N-d close to 6.7 is consistent with the nature of the spin-state transition. Our results show that structural changes during the spin-state transition can play an important role in understanding energetics and electronic structure of LaCoO3.

Park, Hyowon↗
DOE OSTI2026

Magnetoelectric properties at the Co/AlN(0001) interface

AlN nitride is a large-band-gap polar material that has gained interest due to its ability to become ferroelectric and its compatibility with Si- and GaN-based technologies. This compound could, therefore, be a good candidate to design new artificial multiferroics if combined with a ferromagnetic electrode. For this work, we performed first-principles calculations to investigate the set up of the magnetoelectric coupling at the Co/AlN(0001) interface. Our results describe a complex interfacial atomic structure with variable local magnetic properties as a function of the atom alignment. We predict an average variation of interface spin magnetization, when the polarization is reversed, of 3.83 𝜇B nm −2 , close to the values already reported in the literature at metal/oxide interfaces. This confirms the potential of this AlN-based ferroelectric compound to be used in future voltage-controlled spintronic devices.

36 MATERIALS SCIENCE↗