Vlf propagation and noise in the ionosphere observed by sounding rockets final report
Aerobee sounding rocket observation of very low frequency propagation and noise in ionosphere
SOUNDING ROCKET↗
SEARCH · Engineering Papers
Results for “Very Low Frequency”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Kelvin wave packets and flow acceleration - A comparison of modeling and observations
Atmospheric Kelvin waves, as revealed by temperatures obtained from the recent Limb Infrared Monitor of the Stratosphere (LIMS) experiment, commonly occur in packets. A simple two-dimensional gravity-wave model is used to study the upward propagation of these packets through different zonal mean wind profiles derived from the LIMS data. The observed prevalence of high frequency waves in the lower mesosphere and low frequency waves in the lower stratosphere can be exlained by dispersion of energy associated with the range of frequencies comprising a packet. Dominant wave frequencies at upper and lower levels are more distinctly separated if the packet propagates through a layer of westerly winds. Due to dispersion and shear effects, a packet of short temporal length at low levels will have a considerably extended impact on a layer of westerly winds at higher levels. Observed and modeled westerly accelerations resulting from packet absorption occur in the same layer, and are similar in magnitude and duration. These results support the theory that Kelvin waves are responsible for the westerly phase of the semiannual oscillation.
Coy, L.↗
A high-frequency survey of the southern Galactic plane for pulsars
Results of an HF survey designed to detect young, distant, and short-period pulsars are presented. The survey detected a total of 100 pulsars, 46 of which were previously unknown. The periods of the newly discovered pulsars range between 47 ms and 2.5 ms. One of the new discoveries, PSR 1259-63, is a member of a long-period binary system. At least three of the pulsars have ages less than 30,000 yr, bringing the total number of such pulsars to 12. The majority of the new discoveries are distant objects with high dispersion measures, which are difficult to detect at low frequencies. This demonstrates that the survey has reduced the severe selection effects of pulse scattering, high Galactic background temperature, and dispersion broadening, which hamper the detection of such pulsars at low radio frequencies. The pulsar distribution in the southern Galaxy is found to extend much further from the Galactic center than that in the north, probably due to two prominent spiral arms in the southern Galaxy.
Johnston, Simon↗
Image defects from surface and alignment errors in grazing incidence telescopes
The rigid body motions and low frequency surface errors of grazing incidence Wolter telescopes are studied. The analysis is based on surface error descriptors proposed by Paul Glenn. In his analysis, the alignment and surface errors are expressed in terms of Legendre-Fourier polynomials. Individual terms in the expression correspond to rigid body motions (decenter and tilt) and low spatial frequency surface errors of mirrors. With the help of the Legendre-Fourier polynomials and the geometry of grazing incidence telescopes, exact and approximated first order equations are derived in this paper for the components of the ray intercepts at the image plane. These equations are then used to calculate the sensitivities of Wolter type I and II telescopes for the rigid body motions and surface deformations. The rms spot diameters calculated from this theory and OSAC ray tracing code agree very well. This theory also provides a tool to predict how rigid body motions and surface errors of the mirrors compensate each other.
Saha, Timo T.↗
Molecular-Level Insights into the NMR Relaxivity of Gadobutrol Using Quantum and Classical Molecular Simulations
MRI is an indispensable diagnostic tool in modern medicine; however, understanding the molecular-level processes governing NMR relaxation of water in the presence of MRI contrast agents remains a challenge, hindering the molecular-guided development of more effective contrast agents. By using quantum-based polarizable force fields, the first-of-its-kind molecular dynamics (MD) simulations of Gadobutrol are reported where the 1 H NMR longitudinal relaxivity r 1 of the aqueous phase is determined without any adjustable parameters. The MD simulations of r 1 dispersion (i.e., frequency dependence) show good agreement with measurements at frequencies of interest in clinical MRI. Importantly, the simulations reveal key insights into the molecular level processes leading to r 1 dispersion by decomposing the NMR dipole–dipole autocorrelation function G(t) into a discrete set of molecular modes, analogous to the eigenmodes of a quantum harmonic oscillator. The molecular modes reveal important aspects of the underlying mechanisms governing r 1 , such as its multiexponential nature and the importance of the second eigenmodal decay. By simply analyzing the MD trajectories on a parameter-free approach, the Gadobutrol simulations show that the outer-shell water contributes ∼50% of the total relaxivity r 1 compared to the inner-shell water, in contrast to simulations of (nonchelated) gadolinium-aqua where the outer shell contributes only ∼15% of r 1 . The deviation between simulations and measurements of r 1 below clinical MRI frequencies is used to determine the low-frequency electron-spin relaxation time for Gadobutrol, in good agreement with independent studies.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A generalized effective potential for differentially rotating plasmas
Global stability of differentially rotating plasma is investigated using a generalized effective potential. We first, for a current-free system, obtain a general form of an effective potential in terms of the free energies of global curvature and gradients of rotation for non-axisymmetric disturbances. We then examine the stability of differentially rotating disks for several rotation profiles and present the associated effective potential for the onset of these instabilities in the MHD regime. In particular, results for global axisymmetric magnetorotational instability as well as local and global non-axisymmetric modes are presented. The latter constitute two distinct non-axisymmetric modes, a high frequency local MRI and a global low-frequency non-axisymmetric mode (the magneto-curvature mode, introduced in Ebrahimi and Pharr [Astrophys. J. 936, 145 (2022)]), confined either between two Alfvénic resonances or an Alfvénic resonance and a boundary.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Additively Manufactured Copper Windings with Hilbert Structure
In this paper, finite element method simulations and frequency analysis of additively manufactured windings with a Hilbert–cross section pattern were performed over a wide frequency range. The current density distributions for the proposed winding conductor and for a square-wire winding conductor at selected frequencies were compared. An approximately 25% winding loss reduction at higher frequencies and an approximately 5% increase at low frequencies were observed for the analyzed Hilbert structure.
Wojda, Rafal↗
Variable Effects of Dispersed Nanoparticles on Triboelectric Nanogenerators
Technology has recently seen a drastic physical downsizing. Wearable and small devices with lower power demands have become the norm and continue to be more prominent in daily life. With modern devices growing smaller and requiring less electricity, a power source will always be needed. Contemporary batteries are the most common means to power small electronics. However, reliance on conventional batteries may prove insufficient due to the non renewable resources (Li, Ni, Co) required to power the growing number of individual devices each person may own. Additionally, the infrastructure required to harvest and recycle the sheer number of batteries produced presents a further logistic issue to be addressed. A promising alternative to batteries is the usage of triboelectric nanogenerators (TENGs). TENGs are a class of energy harvesting devices that utilize triboelectric generation to convert mechanical/kinetic energy into electrical energy and have exhibited efficiencies up to 85 % at low frequencies. TENGs exhibit a high voltage but low current. Even with the high voltage, the low current output proves to be a significant factor preventing undoped TENGs from being commercially viable. This review will investigate factors that increase the total current produced by TENGs when nanoparticles are utilized in TENGs. Factors such as increasing porosity, surface area, surface charge density, charge storage, deep trap formation, and dielectric constant can be altered to affect the total current by impregnating nanoparticles into the polymer material will be explored.
36 MATERIALS SCIENCE↗
Variable Effects of Dispersed Nanoparticles on Triboelectric Nanogenerators
Technology has recently seen a drastic physical downsizing. Wearable and small devices with lower power demands have become the norm and continue to be more prominent in daily life. With modern devices growing smaller and requiring less electricity, a power source will always be needed. Contemporary batteries are the most common means to power small electronics. However, reliance on conventional batteries may prove insufficient due to the non renewable resources (Li, Ni, Co) required to power the growing number of individual devices each person may own. Additionally, the infrastructure required to harvest and recycle the sheer number of batteries produced presents a further logistic issue to be addressed. A promising alternative to batteries is the usage of triboelectric nanogenerators (TENGs). TENGs are a class of energy harvesting devices that utilize triboelectric generation to convert mechanical/kinetic energy into electrical energy and have exhibited efficiencies up to 85 % at low frequencies. TENGs exhibit a high voltage but low current. Even with the high voltage, the low current output proves to be a significant factor preventing undoped TENGs from being commercially viable. This review will investigate factors that increase the total current produced by TENGs when nanoparticles are utilized in TENGs. Factors such as increasing porosity, surface area, surface charge density, charge storage, deep trap formation, and dielectric constant can be altered to affect the total current by impregnating nanoparticles into the polymer material will be explored.
42 ENGINEERING↗
Mossbauer vibration calibration systems evaluated
Mossbauer effect vibration calibrator measures the velocity of high frequency, low amplitude vibration at various velocity and frequency ranges. It contains a highly precise calibrations standard unit and a vibration measuring system and may be applied to ultrafine testing and calibrating prezoelectric shakers, and vibration transducers.
Hobbs, J. V.↗
Fan noise mechanisms and control. II.
The fluctuating velocity input into the fan is measured by two approaches. One approach makes use of stationary hot wires mounted in front of the rotor. The other approach employs rotating hot wires moving with the rotor. It is shown that the noise has three principal source components including discrete frequencies, which are governed by inflow distortion, low frequency broad band noise governed by inflow turbulence, and high frequency broad band noise governed by the blade tips.
Lowson, M. V.↗
Proceedings of the Fourth Precise Time and Time Interval Planning Meeting
The proceedings of a conference on Precise Time and Time Interval Planning are presented. The subjects discussed include the following: (1) satellite timing techniques, precision frequency sources, and very long baseline interferometry, (2) frequency stabilities and communications, and (3) very low frequency and ultrahigh frequency propagation and use. Emphasis is placed on the accuracy of time discrimination obtained with time measuring equipment and specific applications of time measurement to military operations and civilian research projects.
Acrivos, H. N.↗
Method and apparatus for measuring minority carrier lifetimes and bulk diffusion length in P-N junction solar cells
Carrier lifetimes and bulk diffusion length are qualitatively measured as a means for qualification of a P-N junction photovoltaic solar cell. High frequency (blue) monochromatic light pulses and low-frequency (red) monochromatic light pulses were alternately applied to the cell while it was irradiated by light from a solar simulator, and synchronously displaying the derivative of the output voltage of the cell on an oscilloscope. The output voltage is a measure of the lifetimes of the minority carriers (holes) in the diffused N layer and majority carriers (electrons) in the bulk P material, and of the diffusion length of the bulk silicon. By connecting a reference cell in this manner with a test cell to be tested in reverse parallel, the display of a test cell that matches the reference cell will be a substantially zero output.
Vonroos, O. H.↗
Visually induced motion in flight simulation
Visually induced yaw (circularvection) resulting from a moving wide field presentation, and its interaction with vestibular yaw cues generated by base motion is discussed. A model is presented for the interaction between visual and motion cues in yaw which rationalizes the high frequency utilization of vestibular cues and the low frequency use of visual cues to support sustained angular velocity. The implications for fixed and moving base flight simulator design are discussed. Similar considerations apply to visually induced linear velocity (linearvection) and interesting asymmetries in the fore-aft direction are noted. Visually induced pitch and roll are discussed and modelled in terms of conflict between the visually induced motion and the information regarding attitude based upon graviceptor signals.
Young, L. R.↗
Voltage tunable differential heterodyne spectroscopy in the far-infrared with Josephson junctions
The basic methods of differential heterodyne spectroscopy with Josephson junctions are described. A technique is outlined for bridging the gap between a local oscillator frequency and a signal frequency through the use of a voltage-tunable internal oscillation frequency in a Josephson junction structure. It is shown that an intermediate frequency can be converted to a conveniently low frequency by double frequency conversion carried out directly in a Josephson junction. The expected conversion efficiency is estimated qualitatively. Experiments are discussed in which the differential heterodyne frequency-conversion technique was demonstrated at a wavelength of 0.4 mm and a voltage-tunable oscillation in a double Josephson junction structure was observed, with oscillation line widths as narrow as 0.5 Hz, for a resistance of 3.3 nanohms and an estimated inductance of the order of 1 nH.
Ulrich, B. T.↗
Miniature piezoresistive solid state integrated pressure sensors
The characteristics of silicon pressure sensors with an ultra-small diaphragm are described. The pressure sensors utilize rectangular diaphragm as small as 0.0127 x 0.0254 cm and a p-type Wheatstone bridge consisting of diffused piezoresistive elements, 0.000254 cm by 0.00254 cm. These sensors exhibit as high as 0.5 MHz natural frequency and 1 mV/V/psi pressure sensitivity. Fabrication techniques and high frequency results from shock tube testing and low frequency comparison with microphones are presented.
Kahng, S. K.↗
The effect of barriers on wave propagation phenomena: With application for aircraft noise shielding
The frequency spectrum was divided into high and low frequency regimes and two separate methods were developed and applied to account for physical factors associated with flight conditions. For long wave propagation, the acoustic filed due to a point source near a solid obstacle was treated in terms of an inner region which where the fluid motion is essentially incompressible, and an outer region which is a linear acoustic field generated by hydrodynamic disturbances in the inner region. This method was applied to a case of a finite slotted plate modelled to represent a wing extended flap for both stationary and moving media. Ray acoustics, the Kirchhoff integral formulation, and the stationary phase approximation were combined to study short wave length propagation in many limiting cases as well as in the case of a semi-infinite plate in a uniform flow velocity with a point source above the plate and embedded in a different flow velocity to simulate an engine exhaust jet stream surrounding the source.
Mgana, C. V. M.↗