Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Minimum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Quiet-Time Spectra and Abundances of Energetic Particles During the 1996 Solar Minimum

This report concerns the energy spectra and abundances of ions with atomic number, Z, in the interval 2 greater than or equal to Z and Z less than or equal to 36 and energies approximately 3-20 MeV/amu for solar and interplanetary quiet periods between November 1994 and April 1998 as measured by the large-geometry LEMT telescope on the Wind spacecraft near Earth. The energy spectra show the presence of galactic (GCR) and 'anomalous' cosmic ray (ACR) components, depending on the element. ACR components are reported for Mg and Si for the first time at 1 AU and the previous observation of S and Ar is confirmed. However, only GCR components are clearly apparent for the elements Ca, Ti, Cr, Fe, as well as for C. New limits are placed on a possible ACR contribution for other elements, including Kr.

Reames, Donald V.↗
NASA NTRS1997

The sun at minimum activity: Results from the CELIAS experiment on SOHO

The charge element and isotope analysis system (CELIAS) experiment, designed to continuously measure the composition of the solar wind and solar suprathermal particles, is presented. Information on proton velocity, kinetic temperature, density and out-of-ecliptic flow angle is obtained. A preliminary statistical analysis of proton parameters and freeze-in temperatures, obtained during the first 18 months of the operation of the Solar and Heliospheric Observatory (SOHO), is presented. The first determinations of neon isotopic abundances with CELIAS yielded an excellent agreement with the Apollo-foil experiment. The magnesium isotopic composition in the solar wind agrees with the data acquired from earth.

Bochsler, P.↗
NASA NTRS1997

The solar minimum X2.6/1B flare and CME of 9 July 1996: Solar data - Pt. 1

The solar observations from GOES-8, the Solar and Heliospheric Observatory (SOHO), and the Yohkoh satellite concerning the events of the X-class flare are discussed. The Michelson Doppler imager (MDI) magnetometer shows a new region of magnetic activity in AR 7978. The rapid development and evolution of this region is shown by the MDI and the extreme-ultraviolet Doppler telescope (EDT) data. The coronal mass ejections (CMEs) observed using coronagraphs are presented. The possible association between the CME and the X-flare is considered.

Andrews, M. D.↗
NASA NTRS1997

An equatorial coronal hole at solar minimum

The large transequatorial coronal hole that was observed in the solar corona at the end of August 1996 is presented. It consists of a north polar coronal hole called the 'elephant's trunk or tusk'. The observations of this coronal hole were carried out with the coronal diagnostic spectrometer onboard the Solar and Heliospheric Observatory (SOHO). The magnetic field associated with the equatorial coronal hole is strongly connected to that of the active region at its base, resulting in the two features rotating at almost the same rate.

Bromage, B. J. I.↗
NASA NTRS1997

The solar minimum X2.6/1B flare and CME of 9 July 1996: Propagation - Pt 2

The interplanetary propagation aspects of the first X-class solar flare and coronal mass ejection are discussed. The solar data relevant to this event are summarized. Data from WIND and charge element and isotope analysis system (CELIAS) show solar wind plasma and interplanetary magnetic field disturbances early on 12 July 1996. It was observed that the extrapolation of the coronal mass ejection back to the flare time suggests a close association between them. Moreover, the coronal mass ejection speed is similar to the type two shock's speed. The results suggest that the coronal mass ejection is intimately related to the shock itself.

Dryer, M.↗
NASA NTRS1997

A new look at the quiet sun network in the upper atmosphere during a minimum of activity cycle

The preliminary results obtained with the solar extreme ultraviolet spectrometer, onboard the Solar and Heliospheric Observatory (SOHO), are reported on. The solar ultraviolet measurement of emitted radiation (SUMER) instrument established a long time series of the network evolution in following the solar rotation. The maps of the network evolution were obtained in lines spanning from 10(sup 4) K to 6 x 10(sup 6) K. Line profiles were also recorded with a sampling of 1 x 0.76 sq arcsec over the entire field. The progress analysis of this set of data is underlined and the velocity distribution in the cell network is considered.

Lemaire, P.↗
NASA NTRS1999

Quiet-Time Spectra and Abundances of Energetic Particles During the 1996 Solar Minimum

We report the energy spectra and abundances of ions with atomic number, Z, in the interval Z is greater than or equal to 2 and Z is less than or equal to 36 and energies approximately 3-20 MeV/amu for solar and interplanetary quiet periods between 1994 November and 1998 April as measured by the large-geometry Low Energy Matrix Telescope (LEMT) telescope on the Wind spacecraft near Earth. The energy spectra show the presence of galactic (GCR) and "anomalous" cosmic ray (ACR) components, depending on the element. ACR components are reported for Mg and Si for the first time at 1 AU and the previous observation of S and Ar is confirmed. However, only GCR components are clearly apparent for the elements Ca, Ti, Cr, Fe, as well as for C. New limits are placed on a possible ACR contribution for other elements, including Kr.

Reames, Donald V.↗
NASA NTRS1998

Simple Refractometers for Index Measurements by Minimum Deviation Method from Far-ultraviolet to Near Infrared

The focal shift of an optical filter used in non-collimated light depends directly on substrate thickness and index of refraction. The HST Advanced Camera for Surveys (ACS) requires a set of filters whose focal shifts are tightly matched. Knowing the index of refraction for substrate glasses allows precise substrate thicknesses to be specified. Two refractometers have been developed at the Goddard Space Flight Center (GSFC) to determine the indices of refraction of materials from which ACS filters are made. Modem imaging detectors for the near infrared, visible, and far ultraviolet spectral regions make these simple yet sophisticated refractometers possible. A new technology, high accuracy, angular encoder also developed at GSFC makes high precision index measurement possible in the vacuum ultraviolet.

Leviton, Douglas B.↗
NASA NTRS2001

Using Minimum-Surface Bodies for Iteration Space Partitioning

A number of known techniques for improving cache performance in scientific computations involve the reordering of the iteration space. Some of these reorderings can be considered as coverings of the iteration space with the sets having good surface-to-volume ratio. Use of such sets reduces the number of cache misses in computations of local operators having the iteration space as a domain. We study coverings of iteration spaces represented by structured and unstructured grids. For structured grids we introduce a covering based on successive minima tiles of the interference lattice of the grid. We show that the covering has good surface-to-volume ratio and present a computer experiment showing actual reduction of the cache misses achieved by using these tiles. For unstructured grids no cache efficient covering can be guaranteed. We present a triangulation of a 3-dimensional cube such that any local operator on the corresponding grid has significantly larger number of cache misses than a similar operator on a structured grid.

Frumlin, Michael↗
NASA NTRS1994

Mars Sample Return: A Low Cost, Direct and Minimum Risk Design

Current NASA strategy for Mars exploration is seeking simpler, cheaper, and more reliable missions to Mars. This requirement has left virtually all previously proposed Mars Sample Return (MSR) missions as economically untenable. The MSR mission proposed in this paper represents an economical, back-to-basics approach of mission design by leveraging interplanetary trajectory design and limited surface science for shorter mission duration, advanced propulsion and thermal protection systems for mass reduction and simplified mission operations for high reliability. As a result, the proposed concept, called the Fast, Mini, Direct Mars Sample Return (FMD-MSR) mission represents the cheapest and fastest class of missions that could return a 0.5 kg sample from the surface of Mars to Earth with a total mission duration of less than 1.5 Earth years. The constraints require an aggressive mission design that dictates the use of advanced storable liquid propulsion systems and advanced TPS materials to minimize aeroshell mass. The mission does not have the high risk operations of other MSR missions such as orbit rendezvous at Mars, propulsive insertion at Mars, rover operations on the surface, and sample transfer. This paper details the key mission elements for such a mission and presents a feasible and cost effective design.

Wercinski, Paul F.↗
NASA NTRS1994

Computed Potential Energy Surfaces and Minimum Energy Pathway for Chemical Reactions

Computed potential energy surfaces are often required for computation of such observables as rate constants as a function of temperature, product branching ratios, and other detailed properties. We have found that computation of the stationary points/reaction pathways using CASSCF/derivative methods, followed by use of the internally contracted CI method with the Dunning correlation consistent basis sets to obtain accurate energetics, gives useful results for a number of chemically important systems. Applications to complex reactions leading to NO and soot formation in hydrocarbon combustion are discussed.

Walch, Stephen P.↗
NASA NTRS1994

Characterization of the Minimum Energy Paths for the Reactions of CH(X(sup 2 Pi) and (1)CH2 with C2H2

The reactions of CH(sup 2 Pi) and singlet methylene (1)CH2 with acetylene lead to intermediates which may be important in soot formation. CH(sup 2 Pi) + acetylene leads to CHCHCH (C3H3), CHCCH (C3H2), and propargyl (CH2CCH). (1)CH2 + acetylene leads to cyclopropene and propargyl. All of these reaction products are formed with no barrier. Miller and Melius have previously discussed the dimerization of propargyl to give benzene. C3H3 and C3H2 can dimerize with no barrier to give benzene and para-benzyne, respectively. C3H3 and C3H2 can also add to smaller polynuclear aromatic hydrocarbons (PAH), and may be important species in forming larger PAH or fullerenes.

Walch, Stephen P.↗
NASA NTRS1994

Computed Potential Energy Surfaces and Minimum Energy Pathways for Chemical Reactions

Computed potential energy surfaces are often required for computation of such parameters as rate constants as a function of temperature, product branching ratios, and other detailed properties. For some dynamics methods, global potential energy surfaces are required. In this case, it is necessary to obtain the energy at a complete sampling of all the possible arrangements of the nuclei, which are energetically accessible, and then a fitting function must be obtained to interpolate between the computed points. In other cases, characterization of the stationary points and the reaction pathway connecting them is sufficient. These properties may be readily obtained using analytical derivative methods. We have found that computation of the stationary points/reaction pathways using CASSCF/derivative methods, followed by use of the internally contracted CI method to obtain accurate energetics, gives usefull results for a number of chemically important systems. The talk will focus on a number of applications including global potential energy surfaces, H + O2, H + N2, O(3p) + H2, and reaction pathways for complex reactions, including reactions leading to NO and soot formation in hydrocarbon combustion.

Walch, Stephen P.↗
NASA NTRS1995

Minimum Energy Pathways for Chemical Reactions

Computed potential energy surfaces are often required for computation of such parameters as rate constants as a function of temperature, product branching ratios, and other detailed properties. We have found that computation of the stationary points/reaction pathways using CASSCF/derivative methods, followed by use of the internally contracted CI method to obtain accurate energetics, gives useful results for a number of chemically important systems. The talk will focus on a number of applications to reactions leading to NOx and soot formation in hydrocarbon combustion.

Walch, S. P.↗
NASA NTRS2002

Minimum Arc Threshold Voltage Experiments on Extravehicular Mobility Unit Samples

The International Space Station (ISS) is now under construction in Low Earth Orbit (LEO). The process of building the ISS requires that astronauts carry out many Extravehicular Activities. To protect the astronauts form the hazardous space environment, they are required to wear a suit known as the Extravehicular Mobility Unit (EMU). For most Extra-Vehicular Activities (EVAs) the EMU is tethered to ISS via a steel safety tether. During the course of an EVA it is common for the safety tether to contact exposed metal on both the ISS and the EMU. In this case, the single point ground of the EMU would be at the same potential as the ISS with respect to the LEO Plasma. In the event that the metal structure of the ISS begins to charge negative of the plasma potential as a result of electron collection by the ISS photovoltaic arrays, then the EMU would also be driven to a negative potential. Anodized aluminum components on the EMU would then begin to develop a charge across their amortization layer as ions from the plasma are collected. In the case where large negative potentials are applied to the EMU, dielectric breakdown may occur as a large voltage difference is developed across the thin amortization layer (oxide). The resulting arc plasma may in turn couple to the charge accumulated on the nearby ISS anodized debris shields and thereby generate a large current flow through the metal EMU structure. Current flow through the EMU could result in an electrocution hazard for the Crew Member inside the EMU - and therefore represents an important safety concern. To address this concern, a series of experiments have been undertaken. In each experiment specially prepared anodized aluminum samples were placed in a LEO representative plasma and charged until dielectric breakdown occurred in the form of an arc. This process was repeated a number of times for three sets of samples. During each test the arc voltage and current were monitored. A statistical treatment of the arc voltage threshold will be presented. In addition, safe operating voltages for the EMU are suggested.

Schneider, Todd↗
NASA NTRS2002

Minimizing Cache Misses Using Minimum-Surface Bodies

A number of known techniques for improving cache performance in scientific computations involve the reordering of the iteration space. Some of these reorderings can be considered as coverings of the iteration space with the sets having good surface-to-volume ratio. Use of such sets reduces the number of cache misses in computations of local operators having the iteration space as a domain. First, we derive lower bounds which any algorithm must suffer while computing a local operator on a grid. Then we explore coverings of iteration spaces represented by structured and unstructured grids which allow us to approach these lower bounds. For structured grids we introduce a covering by successive minima tiles of the interference lattice of the grid. We show that the covering has low surface-to-volume ratio and present a computer experiment showing actual reduction of the cache misses achieved by using these tiles. For planar unstructured grids we show existence of a covering which reduces the number of cache misses to the level of structured grids. On the other hand, we present a triangulation of a 3-dimensional cube such that any local operator on the corresponding grid has significantly larger number of cache misses than a similar operator on a structured grid.

Frumkin, Michael↗
NASA NTRS2002

Minimum Control Requirements for Advanced Life Support Systems

Advanced control technologies are not necessary for the safe, reliable and continuous operation of Advanced Life Support (ALS) systems. ALS systems can and are adequately controlled by simple, reliable, low-level methodologies and algorithms. The automation provided by advanced control technologies is claimed to decrease system mass and necessary crew time by reducing buffer size and minimizing crew involvement. In truth, these approaches increase control system complexity without clearly demonstrating an increase in reliability across the ALS system. Unless these systems are as reliable as the hardware they control, there is no savings to be had. A baseline ALS system is presented with the minimal control system required for its continuous safe reliable operation. This baseline control system uses simple algorithms and scheduling methodologies and relies on human intervention only in the event of failure of the redundant backup equipment. This ALS system architecture is designed for reliable operation, with minimal components and minimal control system complexity. The fundamental design precept followed is "If it isn't there, it can't fail".

Boulange, Richard↗
NASA NTRS2001

Aircraft Optimization for Minimum Environmental Impact

The objective of this research is to investigate the tradeoff between operating cost and environmental acceptability of commercial aircraft. This involves optimizing the aircraft design and mission to minimize operating cost while constraining exterior noise and emissions. Growth in air traffic and airport neighboring communities has resulted in increased pressure to severely penalize airlines that do not meet strict local noise and emissions requirements. As a result, environmental concerns have become potent driving forces in commercial aviation. Traditionally, aircraft have been first designed to meet performance and cost goals, and adjusted to satisfy the environmental requirements at given airports. The focus of the present study is to determine the feasibility of including noise and emissions constraints in the early design of the aircraft and mission. This paper introduces the design tool and results from a case study involving a 250-passenger airliner.

Antoine, Nicolas↗