Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “benchmark testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Detection of Isotopes in Urban Source Search Low-Count Gamma Spectra Using Hopfield Neural Networks

Source search campaigns involve measurements of background gamma-ray spectra with a mobile detector-spectrometer traveling along arbitrarily chosen trajectories over a wide screening area. Radiation counts are typically measured with a tellurium-doped sodium iodide [NaI(Tl)] scintillator detector-spectrometer in short acquisition intervals, usually 1 s. The objective is to detect orphan isotopes with half-lives shorter than those of the isotopes in the natural background. In principle, radioisotopes can be identified by their unique gamma emission spectrum. However, detecting orphan isotopes in search data is challenging because low counts measured in short acquisition intervals result in incomplete spectral lines. In this study, we investigate the performance of a Hopfield neural network (HNN) that implements an auto-associative memory for the detection of isotopes of interest in an urban search campaign. The HNN is trained on one example of gamma spectra with well-resolved spectral lines of each isotope of interest. During testing, the auto-associative memory implementation of the HNN processes low-count gamma spectra with partially complete isotopic lines by matching incoming measurements to the closest one of its memory-stored patterns. The testing database consisted of almost 10 000 1-s gamma spectra, including measurements of orphan isotopes 137 Cs, 241 Am, and 131 I, obtained during two urban search surveys with a NaI(Tl) detector. The performance of the HNN detection algorithm was evaluated using precision, recall, and F1 scores, and benchmarked with a multiple linear regression (MLR) identification algorithm. In conclusion, the test results demonstrate that HNN outperforms MLR in the detection of all the isotopes of interest.

Auto associative memory↗

Hybrid Wing Body Aircraft Acoustic Test Preparations and Facility Upgrades

NASA is investigating the potential of acoustic shielding as a means to reduce the noise footprint at airport communities. A subsonic transport aircraft and Langley's 14- by 22-foot Subsonic Wind Tunnel were chosen to test the proposed "low noise" technology. The present experiment studies the basic components of propulsion-airframe shielding in a representative flow regime. To this end, a 5.8-percent scale hybrid wing body model was built with dual state-of-the-art engine noise simulators. The results will provide benchmark shielding data and key hybrid wing body aircraft noise data. The test matrix for the experiment contains both aerodynamic and acoustic test configurations, broadband turbomachinery and hot jet engine noise simulators, and various airframe configurations which include landing gear, cruise and drooped wing leading edges, trailing edge elevons and vertical tail options. To aid in this study, two major facility upgrades have occurred. First, a propane delivery system has been installed to provide the acoustic characteristics with realistic temperature conditions for a hot gas engine; and second, a traversing microphone array and side towers have been added to gain full spectral and directivity noise characteristics.

Heath, Stephanie L.↗

Early User Test: BISON for Fission Gas Release Modeling

As a test to develop an understanding of the capabilities and input of the nuclear fuel performance code BISON, we modeled the fission gas release of the Oconee rod 15309 as there is benchmark data available for comparison. BISON has two fission gas models available, the Forsber-Massih model and the Simple Integrated Fission Gas Release and Swelling [sifgrs] model. Due to time constraints and availability of model parameters [we did not have all of the parameters for the sifgrs model already in hand] we only tested the Forsberg-Massih model. The Oconee rod test has been used in a number of benchmark studies including the integral assessment of FRAPCON 3.4. The Oconee Rod test is a 5-cycle test bundle with an average burnup of 50GWd/MTU. The FRAPCON assessment predicted that Oconee Rod15309 Test case would release 1.25% of all fission gas produced, while experimentally only 0.8% was released at EOL. Other studies using BISON with the sifgrs model have under predicted EOL fission gas release [FGR].

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Strong-QCD Regime Measurement of the Proton’s Spin Structure

The theory of the strong force, Quantum Chromodynamics (QCD) remains one of the most important ways to understand the fundamental properties of ordinary matter. However, at low momentum transfer Q 2 , in the regime where the strong force becomes extremely strong, our understanding of QCD for ordinary nucleons becomes hazy. Several cutting edge theories such as Chiral Perturbation Theory (χPT) and Lattice QCD have provided valuable predictions in this regime, but Lattice QCD has not yet extended predictions of many important quantities to this kinematic region, and Chiral Perturbation Theory has faced several important disagreements with experimental data for the neutron over the last several decades. It is therefore of extreme importance to have a benchmark of experimental data in the low energy regime for the proton’s behavior, as a test of leading theories for the behavior of QCD in this regime. The E08-027 (g2p) experiment ran at Jefferson Lab in 2012 with the goal of collecting this valuable data, and though I was still completing my undergraduate studies at the time, I became involved in the analysis in 2015 and built on the previous work to complete it and analyze the exciting results. This experiment achieved a high precision measurement of the spin structure functions g1 and g2 for the proton, quantities which describe the internal spin structure of the proton. These measurements were taken in the valuable low Q 2 region described above, and used to extract several moments of these spin structure functions which can be directly compared to the cutting-edge predictions of Chiral Perturbation Theory. Though the experiment’s timeline was such that I didn’t have a chance to work directly on the experimental setup, I had the opportunity to acquire hands-on experience working on a polarized target at UNH which is very similar to the crucial polarized target used in the g2p experiment. Full details of the g2p experiment and my experimental work at the University of New Hampshire are presented in this thesis, as well as a detailed description of the analysis process and the exciting benchmark results, which serve as a direct test of all current and future theories of QCD in the low-Q 2 regime.

Ruth, David↗

Network Algorithms for Detection of Radiation Sources

In support of national defense, Domestic Nuclear Detection Office’s (DNDO) Intelligent Radiation Sensor Systems (IRSS) program supported the development of networks of radiation counters for detecting, localizing and identifying low-level, hazardous radiation sources. Industry teams developed the first generation of such networks with tens of counters, and demonstrated several of their capabilities in indoor and outdoor characterization tests. Subsequently, these test measurements have been used in algorithm replays using various sub-networks of counters. Test measurements combined with algorithm outputs are used to extract Key Measurements and Benchmark (KMB) datasets. We present two selective analyses of these datasets: (a) a notional border monitoring scenario that highlights the benefits of a network of counters compared to individual detectors, and (b) new insights into the Sequential Probability Ratio Test (SPRT) detection method, which lead to its adaptations for improved detection. Using KMB datasets from an outdoor test, we construct a notional border monitoring scenario, wherein twelve 2”*2” NaI detectors are deployed on the periphery of 21*21meter square region. A Cs-137 (175 uCi) source is moved across this region, starting several meters from outside and finally moving away. The measurements from individual counters and the network were processed using replays of a particle filter algorithm developed under IRSS program. The algorithm outputs from KMB datasets clearly illustrate the benefits of combining measurements from all networked counters: the source was detected before it entered the region, during its trajectory inside, and until it moved several meters away. When individual counters are used for detection, the source was detected for much shorter durations, and sometimes was missed in the interior region. The application of SPRT for detecting radiation sources requires choosing the detection threshold, which in turn requires a source strength estimate, typically specified as a multiplier of the background radiation level. A judicious selection of this source multiplier is essential to achieve optimal detection probability at a specified false alarm rate. Typically, this threshold is chosen from the Receiver Operating Characteristic (ROC) by varying the source multiplier estimate. ROC is expected to have a monotonically increasing profile between the detection probability and false alarm rate. We derived ROCs for multiple indoor tests using KMB datasets, which revealed an unexpected loop shape: as the multiplier increases, detection probability and false alarm rate both increase until a limit, and then both contract. Consequently, two detection probabilities correspond to the same false alarm rate, and the higher is achieved at a lower multiplier, which is the desired operating point. Using the Chebyshev’s inequality we analytically confirm this shape. Then, we present two improved network-SPRT methods by (a) using the threshold off-set as a weighting factor for the binary decisions from individual detectors in a weighted majority voting fusion rule, and (b) applying a composite SPRT derived using measurements from all counters.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

A high-performance intermediate temperature reversible solid oxide cell with a new barrier layer free oxygen electrode

The best solution to address the critical durability issue of solid oxide electrolytic cells (SOECs) for high-efficiency and high-rate H 2 production is to lower the operating temperature without sacrificing the performance. Developing high performance oxygen electrodes (OEs) is a key to capitalizing this solution. Here, in this paper, we report on a highly active OE for intermediate temperature ZrO 2 -based SOECs without a CeO 2 barrier layer. The new barrier-layer-free (BLF) OE is a composite of two materials, (Bi 0.75 Y 0.25 ) 0.93 Ce 0.07 O 1.5±δ (BYC) that exhibits high oxide-ion conductivity and La 0.8 Sr 0.2 MnO 3 (LSM) that possesses a high electronic conductivity to enable fast oxygen reduction/evolution reactions (ORR/OER). Featuring a microscale porous BYC scaffold decorated with high surface area LSM nanoparticles (NPs), the new BLF-OE exhibited a low area specific resistance (ASR) of 0.10 Ω cm 2 at 650 °C in air. With 50%H 2 -50%H 2 O as a feed to hydrogen electrode (HE) and air to OE, the single cell performance achieved 588 mA cm -2 at 0.80 V in the fuel cell mode and 688 mA cm -2 at 1.30 V in the electrolytic mode at 650 °C. Our in-house testing showed that this level of performance was ~3.5x higher than the cell with the benchmark La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ -Ce 0.9 Gd 0.1 O 2-δ OE. The long-term durability testing under alternating fuel cell and electrolytic modes showed a low degradation rate of 0.10 mA cm -2 h -1 over 550 hours. These encouraging results showed the great promise of the newly developed BYC-LSM to be an excellent OE candidate for intermediate temperature SOECs.

25 ENERGY STORAGE↗

Benchmark Development for TREAT Minimum Critical Mass Core Loading to Support Validation of TREAT Operations

Benchmark experiment data is necessary to validate modeling and simulation activities to support Transient Reactor Experiment Test (TREAT) Facility restart and operations. Key measurements of interest include criticality, control rod worth, excess reactivity, and shutdown margin for varying core loading sizes. Benchmark evaluations are being developed according the guidelines provided in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook) that can also support advanced modeling and simulation activities, new experiment design for advanced reactors and accident tolerant fuel, and potential low-enriched uranium conversion of the TREAT reactor. This summary discusses development activities supporting a benchmark evaluation of the TREAT minimum critical mass core loading, which will be submitted for peer-review and publication in the IRPhEP Handbook with the identifier TREAT-FUND-RESR-001. Detailed models of TREAT were developed and evaluated to prepare benchmark models of the minimum critical mass configuration. Calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries. Discussion of results.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Benchmark Progress towards TREAT M8CAL Core Loading to Support Validation of TREAT Operations

Benchmark experiment data is necessary to validate modeling and simulation activities to support Transient Reactor Experiment Test (TREAT) Facility restart and operations. Key measurements of interest include criticality, control rod worth, excess reactivity, and shutdown margin for varying core loading sizes. Benchmark evaluations are being developed according the guidelines provided in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook) that can also support advanced modeling and simulation activities, new experiment design for advanced reactors and accident tolerant fuel, and potential low-enriched uranium conversion of the TREAT reactor. This summary discusses development activities supporting a benchmark evaluation of the TREAT M8CAL core loading, which will be submitted for peer-review and publication in the IRPhEP Handbook with the identifier TREAT-FUND-RESR-002. Detailed models of TREAT were developed and evaluated to prepare benchmark models of the minimum critical mass configuration. Calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries. Discussion of results.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

SCALE Modeling of the Sodium Cooled Fast-Spectrum Advanced Burner Test Reactor

This report documents the modeling and simulation of a sodium-cooled fast reactor (SFR) as part of a U.S. Nuclear Regulatory Commission–sponsored project to assess the modeling and simulation capabilities for accident progression, source term, and consequence analysis for advanced reactor technologies with the Oak Ridge National Laboratory code SCALE and the Sandia National Laboratories (SNL) code MELCOR. Based on publicly available benchmark specifications, a fully heterogeneous 3D SCALE model of the 250 MWth Advanced Burner Test Reactor (ABTR) was developed to demonstrate SCALE’s capabilities for full-core reactivity analysis, fuel inventory prediction, and decay heat analysis of an SFR. The benchmark specifications contain modeling details for the ABTR core at the beginning of equilibrium cycle (BOEC) at operating conditions; they were derived from a 2006 preconceptual design report produced by Argonne National Laboratory. The ABTR was designed to demonstrate reactor-based transmutation of transuranics, that is, to “burn” transuranics recovered from light-water reactor (LWR) spent fuel. The ABTR’s fuel is designed to operate in 4 month cycles using uranium/transuranic (U/TRU) metallic fuel, with a TRU content of approximately 20%, at a conversion ratio of approximately 0.6. Various reactivity calculations were performed with SCALE for the ABTR and, where possible, compared with results available in the open literature. Additionally, SCALE was used to perform a full-core depletion calculation over the 4 month cycle to obtain the nuclide inventory at the end of equilibrium cycle (EOEC). These nuclide inventories, decay heat, power profiles, and reactivity feedback coefficients at EOEC represent the initial conditions for analyzing severe accident scenarios with MELCOR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Electrocatalytic benchmarking of ruthenium-based bimetallic anodes for the electrocatalytic oxidation of biomass-derived wastewater

In this paper, we report on the synthesis, characterization, and use of ruthenium oxide (RuO 2 ) doped with a secondary metal (M2) to enhance electrochemical activity and stability for the electrocatalytic oxidation (ECO) of biomass-derived wastewaters. We used different electrochemical methods such as cyclic voltammetry (CV), electrochemical surface area (ECSA), and Tafel analysis as well as physical characterization such as grazing incidence X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy to understand how the introduction of M2 affects electrochemical performance. Our results show that including an M2 improves the ECO performance regardless of the composition of the electrolyte. Specifically, we saw increase in ECSA, which could be due to enhanced charge transfer for the pH ranges evaluated. Furthermore, the introduction of organic compounds in wastewater generated during the hydrothermal liquefaction of food waste affected the ECO performance differently, depending on M2, the electrolyte composition, and anodic half-cell potential, highlighting the need to properly control the reaction conditions when testing and characterizing the electrocatalysts under different reaction regimes. We developed an in situ electrocatalytic benchmarking protocol, Boruah – Lopez-Ruiz – Strange (BLoRS), to quickly assess if the presence of M2 improves the ECO performance; thus, saving time and resources in ex situ characterization, testing, and product analysis. This foundational work provides the basis for characterization and benchmarking of electrodes of the ECO of organic compounds.

Electrocatalysis↗

Performance Benchmark of Commercial and Developmental Fission Chambers in Elevated Temperatures

This report documents the testing of two in-core fission chamber technologies for high-temperature irradiation environments. This work is in collaboration with the French Alternative Energies and Atomic Energy Commission (CEA). The fission chamber evaluated by Idaho National Laboratory is the micro-pocket fission detector (MPFD). The fission chamber evaluated by the CEA are the 3 mm miniaturized fission chamber and the 7 mm high-temperature fission chamber. Demonstrations of the MPFD were performed at the Neutron Radiography Facility and the Massachusetts Institute of Technology Reactor. Demonstrations of the CEA fission chambers were performed at the Ohio State University Research Reactor. All demonstrations were conducted with a heated experiment rig up to 850°C.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SERPENT 2 and TRIPOLI-4 neutronics benchmarking of the Jules Horowitz reactor

Jules Horowitz Reactor (JHR) is a future center for nuclear material testing in Europe, currently under construction at CEA Cadarache in southern France. It has been modelled extensively with CEA's HORUS3D/N neutron calculation package, that includes a Monte-Carlo neutron transport code TRIPOLI-4. In order to support the future computational analyses on the reactor core physics, VTT's Monte Carlo neutronics code SERPENT 2 has been used to create an alternative model of the JHR, taking advantage of the pre-existing Constructive Solid Geometry (CSG) structures on which the TRIPOLI-4 model was built. This work describes a benchmark, in which two JHR core configurations were analyzed using both of these models. The first configuration is a fresh fuel core at the beginning of life, in which aluminum based dummy-devices are installed in the reactor test positions. The second configuration represents the end-of-cycle equilibrium core with a heterogeneous burnup distribution, in which CALIPSO devices containing cladding material samples are installed at the in-core experimental positions, while the reflector positions are occupied by DEN-REP devices containing UO{sub 2} fuel. Neutron flux spectra and heat deposition are the parameters of interest in this study, due to their high importance in creating the desired experimental irradiation environment. The impact of delayed gamma energy deposition will be studied in detail, since the two models account for it with different methods. This work aims to establish a SERPENT 2 model of JHR, understanding its differences and agreements with TRIPOLI-4, and discussing its potential future applications. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Comment on “Test of the Stark-effect theory using photoionization microscopy”

An article by Zhao et al. [Phys. Rev. A 86, 053413 (2012)] tests the local frame transformation (LFT) theory by comparing it with benchmark coupled-channel calculations. The system under consideration is an alkali-metal atom that is two-photon ionized in the presence of a static external electric field. Zhao et al. state that the differential cross sections computed in the LFT theory disagree with their supposedly more accurate coupled-channel calculations. They went on to diagnose the discrepancy and claimed that it originates in an inaccurate correspondence between the irregular functions in spherical and parabolic-cylindrical coordinates, a correspondence that lies at the heart of LFT theory. We have repeated the same tests and find that our calculations rule out the discrepancies that were claimed in Zhao et al. [Phys. Rev. A 86, 053413 (2012)] to exist between the LFT approximation and the exact calculations. Lastly, this Comment thus helps to clarify the accuracy of the Harmin-Fano theory and demonstrates that it is in fact remarkably accurate not only for the total photoionization cross section in the Stark effect, but also for the differential cross section in photoionization microscopy.

74 ATOMIC AND MOLECULAR PHYSICS↗

A New Shutdown Dose Rate Benchmark Problem for Representative Fusion Applications

Here, this work introduces a new benchmark problem for calculating shutdown dose rates (SDDRs) aimed at fusion reactor applications. The model is designed to represent a simplified version of a typical ITER port plug. The responses of interest include neutron flux, gamma flux, and gamma SDDR at 12 different locations scattered throughout the port. This article outlines the geometry specifications of the problem, provides material definitions for the components, specifies the required responses to be calculated, and presents the source definition information. The need for this benchmark arises from the limited availability of publicly accessible references, with only one benchmark representing the typical dimensions and materials found in fusion systems. This existing benchmark has been cited extensively, reflecting the demand within the scientific community to test both established and novel workflows for SDDR calculations. However, since its presentation at a conference in 2011, the results have become increasingly well known. Moreover, the absence of formal publication and peer review has led to the details of this benchmark being extracted from secondary sources, such as subsequent studies that reference it. As a result, analysts are left with significant flexibility in interpreting the key parameters, which can be adjusted to account for unknown systematic errors, ultimately reproducing the already well-known responses. This new benchmark serves as an updated version of that earlier work, with the aim of providing a more reliable description of the materials and their impurities, which is crucial for assessing activation and subsequent gamma emission. Additionally, it seeks to provide a geometry that more closely represents an ITER port plug. The improvements in the problem definition will lead to a more reproducible benchmark problem, while also presenting the radiation transport community with a completely new challenge. The results will be published in a future article to allow analysts adequate time to analyze this problem independently.

Benchmark↗

A large-scale benchmarking of deterministic and stochastic derivative-free optimization algorithms

This presentation summarizes our work in the PrOMMiS project on benchmarking of data-driven optimization algorithms and their applications in self-driving laboratories. This work supports the broader project goal of accelerating the identification of promising separation methods and operating conditions for critical minerals separation processes. We present a systematic benchmarking study of 42 data-driven optimization algorithms on a broad collection of 502 test problems. The results identify BAM, GLCCLUSTER, and MULTIMIN as the most effective optimization solvers, with BAM showing the highest overall performance and solving more than 80% of the benchmark problems. The study also shows that no single solver consistently outperforms the others across all problem types, indicating that our future laboratory applications may benefit from using a small set of strong solvers rather than relying on a single method. The presentation also illustrates an in-silico chemical reactor case study showing that data-driven optimization methods can guide autonomous experimentation in a self-driving laboratory and identify optimal operating conditions within a small number of experiments. Overall, the results provide a basis for selecting efficient optimization methods and demonstrate the practical use of data-driven optimization in self-driving laboratory workflows.

36 MATERIALS SCIENCE↗

Algorithm-guided experimentation for autonomous AI systems in self-driving laboratories

This presentation summarizes our work in the PrOMMiS project on benchmarking of data-driven optimization algorithms and their applications in self-driving laboratories. This work supports the broader project goal of accelerating the identification of promising separation methods and operating conditions for critical minerals separation processes. We present a systematic benchmarking study of 42 data-driven optimization algorithms on a broad collection of 502 test problems. The results identify BAM, GLCCLUSTER, and MULTIMIN as the most effective optimization solvers, with BAM showing the highest overall performance and solving more than 80% of the benchmark problems. The study also shows that no single solver consistently outperforms the others across all problem types, indicating that our future laboratory applications may benefit from using a small set of strong solvers rather than relying on a single method. The presentation also illustrates an in-silico chemical reactor case study showing that data-driven optimization methods can guide autonomous experimentation in a self-driving laboratory and identify optimal operating conditions within a small number of experiments. Overall, the results provide a basis for selecting efficient optimization methods and demonstrate the practical use of data-driven optimization in self-driving laboratory workflows.

36 MATERIALS SCIENCE↗

GPU-accelerated kinetic Hall thruster simulations in WarpX

Abstract Two-dimensional (axial-azimuthal) simulations of a Hall thruster are performed using the open-source particle-in-cell code WarpX. The simulation conditions are chosen to match those of the axial-azimuthal benchmark first reported by Charoy et al. in 2019. A range of numerical and solver parameters is investigated in order to find those which yield the best performance. It is found that WarpX completes the benchmark case in 3.8 days on an Nvidia V100 GPU, and in as low as 1.5 days on a more recent Nvidia H100 GPU. Of the numerical parameters investigated, it is determined that the field-solve tolerance and particle resampling thresholds have the largest effect on the simulation wall time and that particle resampling may artificially widen electron velocity distribution functions, leading to unphysical heating. A semi-implicit scheme for the electrostatic field solve is tested and is found to produce results consistent to within 10% of the benchmark in less than twelve hours. The scaling properties of the electrostatic solver to multiple GPUs are also assessed on a uniform plasma test problem. The results of this work are discussed in the context of advancements in GPU hardware and the suitability of kinetic Hall thruster simulations for engineering applications.

Marks, Thomas A.↗

PRELIMINARY REPORT ON EVALUATION OF POTENTIAL ELUANTS FOR NON-ACID ELUTION OF CESIUM FROM RESORCINOL-FORMALDEHYDE RESIN

Small-column ion exchange (SCIX) units installed in high-level waste tanks to remove Cs-137 from highly alkaline salt solutions are among the waste treatment plans in the DOE-complex. Spherical Resorcinol-Formaldehyde (sRF) is the ion exchange resin selected for use in the Hanford Waste Treatment and Immobilization Plant (WTP). It is also the primary ion exchange material under consideration for SCIX at the Hanford site. The elution step of the multi-step ion exchange process is typically done with 0.5 M nitric acid. An acid eluant is a potential hazard in the event of a spill, leak, etc. because the high-level waste tanks are made of carbon steel. Corrosion and associated structural damage may ensue. Studies are ongoing to explore non-acid elution as an alternative. Batch contact sorption equilibrium screening tests have been conducted with 36 potential non-acid eluants. The sorption tests involve equilibrating each cesium-containing eluant solution with the sRF resin for 48 hours at 25 C in a shaker oven. In the sorption tests, an eluant is deemed to have a high cesium elution potential if it minimizes cesium sorption onto the sRF resin. The top candidates (based on lowest cesium sorption distribution coefficients) include ammonium carbonate, ammonium carbonate/ammonium hydroxide, ammonium bicarbonate, rubidium carbonate, ammonium acetate, ammonium acetate/ammonium hydroxide, ammonium bicarbonate/ammonium hydroxide, calcium chloride, and magnesium chloride. The next phase of testing for this work will focus on the following down selected eluants: Ammonium carbonate, ammonium acetate, calcium acetate, magnesium acetate, nitric acid, and ammonium hydroxide. The next testing phase is a confirmation of the elution ability of the selected eluants. It will mimic a typical sRF cesium ion exchange process i.e., sorption or loading, caustic wash, water rinse, and elution via batch contact sorption and quasi column caustic wash/water rinse/elution. Due to corrosion concerns, calcium acetate and magnesium acetate will be tested instead of calcium chloride and magnesium chloride respectively. Nitric acid is for benchmarking since it is the baseline sRF eluant. The information at hand indicates ammonium hydroxide, while a weak base, may hold promise as an effective eluant. Hence, its inclusion among the eluants to be studied despite the fact that it was not tested as a stand-alone eluant earlier.

36 MATERIALS SCIENCE↗