SEARCH · Engineering Papers

Results for “Simulation software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Geometric error characterization and error budgets

Procedures used in characterizing geometric error sources for a spaceborne imaging system are described using the LANDSAT D thematic mapper ground segment processing as the prototype. Software was tested through simulation and is undergoing tests with the operational hardware as part of the prelaunch system evaluation. Geometric accuracy specifications, geometric correction, and control point processing are discussed. Cross track and along track errors are tabulated for the thematic mapper, the spacecraft, and ground processing to show the temporal registration error budget in pixel (42.5 microrad) 90%.

Beyer, E.↗

NASA NTRS1982

CLASS - A comprehensive satellite link simulation package

CLASS (Communications Link Analysis and Simulation System) is a software package developed for NASA to predict the communications and tracking performance of the Tracking and Data Relay Satellite System (TDRSS) services. This paper describes the capabilities of CLASS and the communications link model used and discusses typical applications for CLASS.

Braun, W. R.↗

NASA NTRS1985

Modeling techniques used in the communications link analysis and simulation system (CLASS)

CLASS (Communications Link Analysis and Simulation System) is a software package developed for NASA to predict the communication and tracking performance of the Tracking and Data Relay Satellite System (TDRSS) services. The modeling techniques used in CLASS are described. The components of TDRSS and the performance parameters to be computed by CLASS are too diverse to permit the use of a single technique to evaluate all performance measures. Hence, each CLASS module applies the modeling approach best suited for a particular subsystem and/or performance parameter in terms of model accuracy and computational speed.

Braun, W. R.↗

NASA NTRS1985

Validation of the communications link analysis and simulation system (CLASS)

CLASS (Communication Link Analysis and Simulation System) is a software package developed for NASA to predict the communication and tracking performance of the Tracking and Data Relay Satellite System (TDRSS) services. The methods used to verify CLASS are described. The usefulness of a software tool such as CLASS depends strongly on the reliability and accuracy of the results it produces. For this reason, considerable attention was paid to validation throughout the CLASS development.

Braun, W. R.↗

NASA NTRS1985

New atmospheric sensor analysis study

A progress report of the activities pertaining to the Atmospheric Sensor Analysis Study is given. The current revision of the Perkin-Elmer Operating System OS/32 MT 7.2.1 was installed on the Atmospheric Modeling and Simulation System (AMASS). This software appears to offer a means of distributing disc storage among the user community in a more optimal manner than previously available using the file manager. Next Generation Weather Radar (NEXRAD) software has been received from the National Severe Storms Laboratory (NSSL) and has been loaded onto the Perkin-Elmer. Extensive modifications will be required to permit the software to be compatible with the operating system.

Parker, K. G.↗

NASA NTRS1985

Estimation of finite mixtures using the empirical characteristic function

A problem which occurs in analyzing LANDSAT scenes is the problem of separating the components of a finite mixture of several distinct probability distributions. A review of the literature indicates this is a problem which occurs in many disciplines, such as engineering, biology, physiology and economics. Many approaches to this problem have appeared in the literature; however, most are very restrictive in their assumptions or have met with only a limited degree of success when applied to realistic situations. A proceudre is investigated with combines the k-L procedure of (Feurverger and McDunnough, 1981) with the MAICE procedure of (Akaike, 1974). The feasibility of this approach is being investigated numerically via the development of a computer software package enabling a simulation study and comparison with other procedures.

Anderson, C.↗

NASA NTRS1985

Demonstration of various rotor instabilities (exhibit of Bently Rotor Dynamics Research Corporation Laborator rigs at symposium on instability in rotaing machinery)

The operation of rotor rigs used to demonstrate various instability phenomena occurring in rotating machines is described. The instability phenomena demonstrated included oil whirl/whip antiswirl, rub, loose rotating parts, water-lubricated bearing instabilities, and cracked shaft. The rotor rigs were also used to show corrective measures for preventing instabilities. Vibrational response data from the rigs were taken with modern, computerized instrumentation. The rotor nonsynchronous perturbation rig demonstrated modal identification techniques for rotor/bearing systems. Computer-aided data acquisition and presentation, using the dynamic stiffness method, makes it possible to identify rotor and bearing parameters for low modes. The shaft mode demonstrator presented the amplified modal shape line of the shaft excited by inertia forces of unbalance (synchronous perturbation). The first three bending modes of the shaft can be demonstrated. The user-friendly software, Orbits, presented a simulation of rotor precessional motion that is characteristic of various instability phenomena. The data presentation demonstration used data measured on a turbine driven compressor train as an example of how computer aided data acquisition and presentation assists in identifying rotating machine malfunctions.

Muszynska, A.↗

NASA NTRS1988

Computational structural mechanics for engine structures

The computational structural mechanics (CSM) program at Lewis encompasses the formulation and solution of structural mechanics problems and the development of integrated software systems to computationally simulate the performance, durability, and life of engine structures. It is structured to supplement, complement, and, whenever possible, replace costly experimental efforts. Specific objectives are to investigate unique advantages of parallel and multiprocessing for reformulating and solving structural mechanics and formulating and solving multidisciplinary mechanics and to develop integrated structural system computational simulators for predicting structural performance, evaluating newly developed methods, and identifying and prioritizing improved or missing methods.

Chamis, Christos C.↗

NASA NTRS1988

Analytical investigation of the dynamics of tethered constellations in earth orbit

This Quarterly Report on Tethering in Earth Orbit deals with three topics: (1) Investigation of the propagation of longitudinal and transverse waves along the upper tether. Specifically, the upper tether is modeled as three massive platforms connected by two perfectly elastic continua (tether segments). The tether attachment point to the station is assumed to vibrate both longitudinally and transversely at a given frequency. Longitudinal and transverse waves propagate along the tethers affecting the acceleration levels at the elevator and at the upper platform. The displacement and acceleration frequency-response functions at the elevator and at the upper platform are computed for both longitudinal and transverse waves. An analysis to optimize the damping time of the longitudinal dampers is also carried out in order to select optimal parameters. The analytical evaluation of the performance of tuned vs. detuned longitudinal dampers is also part of this analysis. (2) The use of the Shuttle primary Reaction Control System (RCS) thrusters for blowing away a recoiling broken tether is discussed. A microcomputer system was set up to support this operation. (3) Most of the effort in the tether plasma physics study was devoted to software development. A particle simulation code has been integrated into the Macintosh II computer system and will be utilized for studying the physics of hollow cathodes.

Lorenzini, Enrico C.↗

NASA NTRS1987

A neurocomputer based on an analog-digital hybrid architecture

A novel analog-digital hybrid architecture based on the utilization of high density digital random access memories for the storage of the synaptic weights of a neural network, and high speed analog hardware to perform neural computation is described. An electronic neurocomputer based on such an architecture is ideally suited for investigating the dynamics, associative recall properties, and computational capabilities of neural networks and provides significant speed improvement in comparison to conventional software based neural network simulations. As a demonstration of the feasibility of the hybrid architectural concept, a prototype breadboard hybrid neurocomputer system with 32 neurons has been designed and fabricated with off-the-shelf hardware components. The performance of the breadboard system has been tested for variety of applications including associative memory and combinatorial problem solving such as Graph Coloring, and is discussed in this paper.

Moopenn, A.↗

NASA NTRS1989

Computational structural mechanics for engine structures

The computational structural mechanics (CSM) program at Lewis encompasses: (1) fundamental aspects for formulating and solving structural mechanics problems, and (2) development of integrated software systems to computationally simulate the performance/durability/life of engine structures. It is structured to mainly supplement, complement, and whenever possible replace, costly experimental efforts which are unavoidable during engineering research and development programs. Specific objectives include: investigate unique advantages of parallel and multiprocesses for: reformulating/solving structural mechanics and formulating/solving multidisciplinary mechanics and develop integrated structural system computational simulators for: predicting structural performances, evaluating newly developed methods, and for identifying and prioritizing improved/missing methods needed. Herein the CSM program is summarized with emphasis on the Engine Structures Computational Simulator (ESCS). Typical results obtained using ESCS are described to illustrate its versatility.

Chamis, C. C.↗

NASA NTRS1989

Computational structural mechanics for engine structures

Chamis, Christos C.↗

NASA NTRS1989

Computer-aided software development process design

The authors describe an intelligent tool designed to aid managers of software development projects in planning, managing, and controlling the development process of medium- to large-scale software projects. Its purpose is to reduce uncertainties in the budget, personnel, and schedule planning of software development projects. It is based on dynamic model for the software development and maintenance life-cycle process. This dynamic process is composed of a number of time-varying, interacting developmental phases, each characterized by its intended functions and requirements. System dynamics is used as a modeling methodology. The resulting Software LIfe-Cycle Simulator (SLICS) and the hybrid expert simulation system of which it is a subsystem are described.

Lin, Chi Y.↗

NASA NTRS1991

A reconfigurable multicarrier demodulator architecture

An architecture based on parallel and pipline design approaches has been developed for the Frequency Division Multiple Access/Time Domain Multiplexed (FDMA/TDM) conversion system. The architecture has two main modules namely the transmultiplexer and the demodulator. The transmultiplexer has two pipelined modules. These are the shared multiplexed polyphase filter and the Fast Fourier Transform (FFT). The demodulator consists of carrier, clock, and data recovery modules which are interactive. Progress on the design of the MultiCarrier Demodulator (MCD) using commercially available chips and Application Specific Integrated Circuits (ASIC) and simulation studies using Viewlogic software will be presented at the conference.

Kwatra, S. C.↗

NASA NTRS1992

Control of robot dynamics using acceleration control

Acceleration control of robotic devices can provide improvements to many space-based operations using flexible manipulators and to ground-based operations requiring better precision and efficiency than current industrial robots can provide. This paper reports on a preliminary study of acceleration measurement on robotic motion during parabolic flights on the NASA KC-135 and a parallel study of accelerations with and without gravity arising from computer simulated motions using TREETOPS software.

Workman, G. L.↗

NASA NTRS1992

Viewing analyses for the assembly of Space Station Freedom (SSF)

Analyses are currently being conducted in the Man-Systems Division of the NASA Johnson Space Center, on the restructured Space Station Freedom configuration to determine viewing requirements for both robotic tasks and for extravehicular crew activities. The use of the PLAID software, a 3D modeling simulation tool, provides a simulation of the environment and the system hardware to identify potential problem areas needing further refinement in design development. This process enables human factor considerations and issues to be explored during the design process to identify and correct problems before hardware is actually constructed. Preliminary results have identified several potential viewing problem areas with the available lighting for both robotic and EVA tasks. To rectify the potential viewing problems identified through simulation, additional cameras and lighting enhancements are being proposed at various sites along the truss and on the Shuttle to provide more complete coverage of work task sites. Supplementing the existing cameras with color coded alignment aids will also help reduce the workload involved with robotic tasks.

Stealey, Sheryl↗

NASA NTRS1991

Using a focal-plane array to estimate antenna pointing errors

The use of extra collecting horns in the focal plane of an antenna as a means of determining the Direction of Arrival (DOA) of the signal impinging on it, provided it is within the antenna beam, is considered. Our analysis yields a relatively simple algorithm to extract the DOA from the horns' outputs. An algorithm which, in effect, measures the thermal noise of the horns' signals and determines its effect on the uncertainty of the extracted DOA parameters is developed. Both algorithms were implemented in software and tested in simulated data. Based on these tests, it is concluded that this is a viable approach to the DOA determination. Though the results obtained are of general applicability, the particular motivation for the present work is their application to the pointing of a mechanically deformed antenna. It is anticipated that the pointing algorithm developed for a deformed antenna could be obtained as a small perturbation of the algorithm developed for an undeformed antenna. In this context, it should be pointed out that, with a deformed antenna, the array of horns and its associated circuitry constitute the main part of the deformation-compensation system. In this case, the pointing system proposed may be viewed as an additional task carried out by the deformation-compensation hardware.

Zohar, S.↗

NASA NTRS1992

Analog/digital pH meter system I.C.

The project utilizes design automation software tools to design, simulate, and fabricate a pH meter integrated circuit (IC) system including a successive approximation type seven-bit analog to digital converter circuits using a 1.25 micron N-Well CMOS MOSIS process. The input voltage ranges from 0.5 to 1.0 V derived from a special type pH sensor, and the output is a three-digit decimal number display of pH with one decimal point.

Vincent, Paul↗