Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Effect of the Surface Modification of Synthetic Diamond with Nickel or Tungsten on the Properties of Copper–Diamond Composites

Tungsten- and nickel-containing coatings have been produced on the surface of synthetic diamond crystals by rotary chemical vapor deposition (RCVD) using tungsten hexacarbonyl, W(CO){sub 6}, and nickelocene, Ni(C{sub 5}H{sub 5}){sub 2}, as gaseous precursors. The thickness, composition, and morphology of the coatings have been shown to depend on the RCVD process duration and reactant concentrations in the vapor phase. The synthetic diamond microcrystals with tungsten- and nickel-containing coatings have been used to produce copper–diamond heat-conducting composites. Powder mixtures containing 50 vol % diamond with a particle size of 50, 100, or 200 μm have been consolidated by spark plasma sintering or hot pressing. It has been shown that the highest relative density (97%) and thermal conductivity (340 W/(m K)) are offered by the composites produced by spark plasma sintering using tungsten carbide-coated 50-μm diamond crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Abrasion on the Crystal Structure of ZnS and ZnSe Ceramics

Zinc sulfide and zinc selenide ceramic samples prepared by hot pressing (HP) and chemical vapor deposition (CVD) have been subjected to dry grinding simulating dust erosion of these materials under real service conditions. It has been demonstrated that photoluminescence measurements allow one to follow the degradation of the crystal structure of ceramic grains by monitoring the intensity of structure-sensitive emission bands. The crystal structure of ZnS, a harder material, has been shown to be less sensitive to abrasion. Moreover, the abrasion resistance of the ceramics produced by CVD exceeds that of the HP ceramics of the same composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanochemical synthesis of nonstoichiometric nanocrystals La{sub 1-y}Ca{sub y}F{sub 3-y} with a tysonite structure and nanoceramic materials from CaF{sub 2} and LaF{sub 3} crystals

The nonstoichiometric phases La{sub 1-y}Ca{sub y}F{sub 3-y} (y = 0.15, 0.20) with a tysonite (LaF{sub 3}) structure have been prepared for the first time by the mechanochemical synthesis from CaF{sub 2} and LaF{sub 3} crystals. The average size of coherent scattering regions is approximately equal to 10-30 nm. It has been shown that the compositions of the phases prepared by the mechanochemical synthesis are inconsistent with the phase diagram of the CaF{sub 2}-LaF{sub 3} system. The 'mechanohydrolysis' of the La{sub 1-y}Ca{sub y}F{sub 3-y} phase has been observed for the first time. Under these conditions, the La{sub 1-y}Ca{sub y}F{sub 3-y} phase partially transforms into lanthanum calcium oxyfluoride for a milling time of 180 min with intermediate sampling. The La{sub 1-y}Ca{sub y}F{sub 3-y} nanoceramic materials have been prepared from a powder of the mechanochemical synthesis product by pressing under a pressure of (2-6) x 10{sup 8} Pa at room temperature. The electrical conductivity of the synthesized materials at a temperature of 200 deg. C is equal to 4.9(6) x 10{sup -4} S/cm, and the activation energy of electrical conduction is 0.46(2) eV. These data for the nanoceramic materials coincide with those obtained for migration of fluorine vacancies in single-crystal tysonite fluoride materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Yield stress and plasticity of nanostructured titanium of different purity at 300, 77, and 4.2 K

Specimens of nanostructured titanium with different dopant concentrations were prepared by intense plastic deformation via equal-channel-angular pressing. The low-temperature mechanical characteristics of the specimens subjected to active deformation under uniaxial tension and compression were studied. The yield stress and the limit uniform deformation of nanostructured and coarse-grained polycrystalline titanium were compared.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluorine-ion conductivity of different technological forms of solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (LaF{sub 3} Type ) (M = Ca, Sr, Ba; R Are Rare Earth Elements)

We have investigated the conductivity of some representatives of different technological forms of fluoride-conducting solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (M = Ca, Sr, Ba; R are rare earth elements) with an LaF{sub 3} structure: single crystals, cold- and hot-pressing ceramics based on a charge prepared in different ways (mechanochemical synthesis, solid-phase synthesis, and fragmentation of single crystals), polycrystalline alloys, etc. It is shown (by impedance spectroscopy), that different technological forms of identical chemical composition (R, M, y) exhibit different electrical characteristics. The maximum conductivity is observed for the single-crystal form of R{sub 1–y}M{sub y}F{sub 3–y} tysonite phases, which provides (in contrast to other technological forms) the formation of true volume ion-conducting characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the interaction conditions of the probe of an atomic-force microscope with the n-GaAs surface on the triboelectrization phenomenon

Triboelectrization as a result of the scanning of an atomic-force-microscope probe over an n-GaAs surface in the contact mode is investigated. The dependences of the local potential variation on the scanning rate and the pressing force of the probe are obtained. The results are explained by point-defect formation in the surface layers of samples under the effect of deformation of these layers during probe scanning. The charge localized at these defects in the case of equilibrium changes the potential of surface, which is subject to triboelectrization. It is shown that, for qualitative explanation of the observed dependences, it is necessary to take into account both the generation and annihilation of defects in the region experiencing deformation.

36 MATERIALS SCIENCE↗

Structure of the Cu{sub 2}Se compound produced by different methods

Copper-selenide (Cu{sub 2}Se) samples are produced by mechanochemical synthesis and compaction by spark plasma sintering and hot pressing. The structure and phase composition of the samples before and after heat treatment are studied by the X-ray diffraction technique and electron microscopy. The character of changes in the shape and size of structural elements of the samples is shown. Variations in the phase composition of copper selenide in the temperature range from 25 to 500°C are studied in situ.

36 MATERIALS SCIENCE↗

Thermoelectric properties of Bi{sub 2}Te{sub 2.4}Se{sub 0.6} solid solutions of different particle-size composition

The thermoelectric properties of n-type Bi{sub 2}Te{sub 2.4}Se{sub 0.6} solid solution prepared by the vacuum hot pressing of powder mixtures with different particle sizes are investigated. The powders were prepared by the mechanical grinding of ingots and melt spinning. The microstructure and fracture pattern of a sample cleavage surface are analyzed using scanning electron microscopy and optical microscopy. The thermoelectric characteristics (the Seebeck coefficient, electrical conductivity, and thermal conductivity) are measured at room temperature and in the temperature range of 100–700 K.

36 MATERIALS SCIENCE↗

Materials Based on Solid Solutions of Bismuth Chalcogenides of n-Type Conductivity Prepared by Melt Crystallization in a Liquid

The microstructure, mechanical, and thermoelectric properties of samples of the n-type Bi{sub 2}Te{sub 3}–Bi{sub 2}Se{sub 3} solid-solution samples containing 6, 8, and 10 mol % Bi{sub 2}Se{sub 3}, doped with antimony iodide, cadmium chloride, and hexabromobenzene, are investigated. The samples are formed by hot pressing and the extrusion of granules prepared by melt crystallization in a liquid and ground in a mortar, cutting mill, and ball mill. Measurements are performed at room temperature and in the range of 100–600 K. The formation conditions and compositions of materials with an ultimate compressive strength of ~250 MPa and thermoelectric efficiency of (ZT){sub max} = (0.9–1.0) in the temperature range of 320–430 K are found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Materials Based on Solid Solutions of Bismuth and Antimony Tellurides Formed by Rapid Melt Crystallization Methods

p-type Bi 0.5 Sb 1.5 Te 3 solid solutions prepared by hot pressing and the extrusion of powders prepared by rapid melt crystallization methods such as melt spinning and melt crystallization in a liquid are investigated. The morphology of the powders, the sample cleavage surface, and their microstructure are investigated using optical microscopy, scanning electron microscopy, and scanning tunneling microscopy. The mechanical properties of the samples are investigated by room-temperature compression tests. The Seebeck coefficient, electrical conductivity, and thermal conductivity of the materials are measured in the temperature range of 100–600 K. The highest limiting compressive strength σ B = 145 MPa at 300 K and maximal thermoelectric efficiency (ZT) max = 1.34 at 370 K are found for materials extruded from granules prepared by melt crystallization in water and ground in a ball mill.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelectric Properties of Nanocomposite Bi{sub 0.45}Sb{sub 1.55}Te{sub 2.985} Solid Solution with SiO{sub 2} Microparticles

Nanocomposite thermoelectrics based on Bi{sub 0.45}Sb{sub 1.55}Te{sub 2.985} solid solution of p-type conductivity are fabricated by the hot pressing of nanopowders of this solid solution with the addition of SiO{sub 2} microparticles. Investigations of the thermoelectric properties show that the thermoelectric power of the nanocomposites increases in a wide temperature range of 80–420 K, while the thermal conductivity considerably decreases at 80–320 K, which, despite a decrease in the electrical conductivity, leads to an increase in the thermoelectric efficiency in the nanostructured material without the SiO{sub 2} addition by almost 50% (at 300 K). When adding SiO{sub 2}, the efficiency decreases. The initial thermoelectric fabricated without nanostructuring, in which the maximal thermoelectric figure of merit ZT = 1 at 390 K, is most efficient at temperatures above 350 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Percolation transition in carbon composite on the basis of fullerenes and exfoliated graphite

The electrical conductivity of a carbon composite on the basis of C{sub 60} fullerenes and exfoliated graphite is investigated in the range of relative contents of components from 0 to 100%. The samples are obtained by the thermal treatment of the initial dispersed mixtures in vacuum in the diffusion–adsorption process and their further cold pressing. The resistivity of the samples gradually increases with an increase in the fraction of fullerenes, and a sharp transition from the conductive state to the dielectric one is observed after achieving certain concentrations of C{sub 60}. The interpretation of the results within the percolation theory makes it possible to evaluate the percolation threshold (expressed as a relative content of graphite) as equal to 4.45 wt % and the critical conductivity index as equal to 1.85 (which is typical for three-dimensional two component disordered media including those having pores).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Carbon on the Electrical Properties of Copper Oxide-Based Bulk Composites

The effect of carbon filler on the electrical resistance and the thermopower of copper oxide-based composites produced by ceramic technology by hot pressing has been studied. It is found that the dependences of the electrical resistivity on the filler concentration are characteristic by S-like curves that are typical of percolation systems; in this case, the resistivity decreases more substantially as the carbon content increases as compared to the decrease in thermopower value, which is accompanied by the existence of the maximum of the factor of thermoelectric power near the percolation threshold. The studies of the temperature dependences of the resistivity and the thermopower at low temperatures show that, in the range 240–300 K, the predominant mechanism of the electrotransfer of all the composites under study is the hopping mechanism. At temperatures lower than 240 K, the composites with a nanocrystalline CuO matrix have a hopping conductivity with a variable hopping distance over localized states of the matrix near the Fermi level, which is related to the conductivity over intergrain CuO boundaries. A schematic model of the band structure of nanocrystalline CuO with carbon filler is proposed on the base of the analysis of the found experimental regularities of the electrotransfer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size-scaling of tensile failure stress in boron carbide

Weibull strength-size-scaling in a rotary-ground, hot-pressed boron carbide is described when strength test coupons sampled effective areas from the very small (~ 0.001 square millimeters) to the very large (~ 40,000 square millimeters). Equibiaxial flexure and Hertzian testing were used for the strength testing. Characteristic strengths for several different specimen geometries are analyzed as a function of effective area. Characteristic strength was found to substantially increase with decreased effective area, and exhibited a bilinear relationship. Machining damage limited strength as measured with equibiaxial flexure testing for effective areas greater than ~ 1 mm2 and microstructural-scale flaws limited strength for effective areas less than 0.1 mm2 for the Hertzian testing. The selections of a ceramic strength to account for ballistically-induced tile deflection and to account for expanding cavity modeling are considered in context with the measured strength-size-scaling.

36 MATERIALS SCIENCE↗

Macromolecular powder diffraction : structure solution via molecular.

Macromolecular powder diffraction is a burgeoning technique for protein structure solution - ideally suited for cases where no suitable single crystals are available. Over the past seven years, pioneering work by Von Dreele et al. [1,2] and Margiolaki et al. [3,4] has demonstrated the viability of this approach for several protein structures. Among these initial powder studies, molecular replacement solutions of insulin and turkey lysozyme into alternate space groups were accomplished. Pressing the technique further, Margiolaki et al. [5] executed the first molecular replacement of an unknown protein structure: the SH3 domain of ponsin, using data from a multianalyzer diffractometer. To demonstrate that cross-species molecular replacement using image plate data is also possible, we present the solution of hen egg white lysozyme using the 60% identical human lysozyme (PDB code: 1LZ1) as the search model. Due to the high incidence of overlaps in powder patterns, especially in more complex structures, we have used extracted intensities from five data sets taken at different salt concentrations in a multi-pattern Pawley refinement. The use of image plates severely increases the overlap problem due to lower detector resolution, but radiation damage effects are minimized with shorter exposure times and the fact that the entire pattern is obtained in a single exposure. This image plate solution establishes the robustness of powder molecular replacement resulting from different data collection techniques.

59 BASIC BIOLOGICAL SCIENCES↗

FINAL TECHNICAL REPORT

This research effort was directed towards the development of a novel cold-setting adhesive for the manufacture of laminated veneer lumber, LVL. The adhesives studied were isocyanate-reactive polyurethanes that cure at room temperature and bond to high moisture content veneer (12%). The elimination of hot-pressing and the reduction in veneer drying is expected to provide substantial energy savings and decreases in VOC emissions. Furthermore, the use of higher moisture content veneer was expected to reduce or eliminate the tendency for veneer over drying, and the related reduction in wood surface energy. The effort produced a novel emulsion polymer isocyanate (EPI) adhesive that performed better than the standard phenol-formaldehyde adhesive. This performance comparison/evaluation suggested that the new adhesive could perhaps meet the original project goals, stated above. However, this effort was not translated into technological practice, nor evaluated on a larger pilot scale, because the participating companies experienced personnel changes that altered outlook for this technology.

09 BIOMASS FUELS↗

Assessment of Biomass Resources in Afghanistan

Afghanistan is facing many challenges on its path of reconstruction and development. Among all its pressing needs, the country would benefit from the development and implementation of an energy strategy. In addition to conventional energy sources, the Afghan government is considering alternative options such as energy derived from renewable resources (wind, solar, biomass, geothermal). Biomassenergy is derived from a variety of sources -- plant-based material and residues -- and can be used in various conversion processes to yield power, heat, steam, and fuel. This study provides policymakers and industry developers with information on the biomass resource potential in Afghanistan for power/heat generation and transportation fuels production. To achieve this goal, the study estimatesthe current biomass resources and evaluates the potential resources that could be used for energy purposes.

09 BIOMASS FUELS↗