Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Space Robotics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Lessons Learned from Astrobee Operations on the International Space Station

Since its launch in 2019, NASA has been operating three Astrobee free-flying robots providing an autonomous and adaptable research platform aboard the International Space Station (ISS). These robots have not only facilitated a myriad of national and international research endeavors in microgravity but have also served as a STEM outreach platform for student competitions aboard the ISS. Amidst its extensive operational tenure, spanning over five years and exceeding 1200 hours of cumulative free-flyer operation as of April 2024, the Astrobee robots have encountered software and hardware anomalies. Despite its inherent design for on-orbit repair or replacement, certain anomalies have proven to be complex, necessitating remote resolution via software and firmware updates or, in extreme cases, hardware replacements or the return of faulty units to NASA's ground facilities for repair. Such challenges underscore the delicate balance between the autonomous functionality of Astrobee and the occasional need for human intervention to maintain optimal performance. One recurring point of failure identified during Astrobee's operational lifespan has been the SD card, a critical component utilized by the different Astrobee processors and the Dock Station. The occurrence of SD card anomalies, both on orbit and within ground units, has provided invaluable insights into the improvement of Astrobee's systems and mitigation to future faults. This presentation will focus on four key areas: 1. Overview of Faults and Anomalies: A comprehensive examination of the diverse array of faults and anomalies encountered by Astrobee and its associated systems both in orbit and on the ground. From software glitches to hardware malfunctions, this section provides insights into the challenges faced during Astrobee's operational tenure. 2. Resolution Processes and Procedures: An in-depth discussion of the methodologies and procedures implemented to resolve the encountered anomalies. This includes remote troubleshooting, software patches, firmware updates, and, when necessary, the logistics involved in hardware replacements or down-massing for repair. 3. Implementation of Software Updates and Hardware Upgrades: A detailed exploration of the strategies employed to mitigate the risk of recurring anomalies through the implementation of software updates and hardware upgrades. This section highlights the iterative nature of Astrobee's development, emphasizing the continuous pursuit of robustness and reliability. 4. Lessons Learned and Future Directions: Reflecting on the insights gained from addressing anomalies, this section examines the lessons learned and outlines future directions for enhancing Astrobee's robustness and resilience. It underscores the iterative nature of space exploration and the importance of adaptability and continuous improvement in the pursuit of scientific discovery. Through a nuanced examination of Astrobee's operational challenges and the strategies employed to overcome them, this presentation sheds light on the complexities of operating autonomous robotic systems in the ISS environment. It underscores NASA's commitment to pushing the boundaries of exploration and innovation while navigating the inherent challenges of space exploration.

Astrobee↗
DOE OSTI2024

A dynamic Bayesian optimized active recommender system for curiosity-driven partially Human-in-the-loop automated experiments

Optimization of experimental materials synthesis and characterization through active learning methods has been growing over the last decade, with examples ranging from measurements of diffraction on combinatorial alloys at synchrotrons, to searches through chemical space with automated synthesis robots for perovskites. In virtually all cases, the target property of interest for optimization is defined a priori with the ability to shift the trajectory of the optimization based on human-identified findings during the experiment is lacking. Thus, to highlight the best of both human operators and AI-driven experiments, here we present the development of a human–AI collaborated experimental workflow, via a Bayesian optimized active recommender system (BOARS), to shape targets on the fly with human real-time feedback. Here, the human guidance overpowers AI at early iteration when prior knowledge (uncertainty) is minimal (higher), while the AI overpowers the human during later iterations to accelerate the process with the human-assessed goal. We showcase examples of this framework applied to pre-acquired piezoresponse force spectroscopy of a ferroelectric thin film, and in real-time on an atomic force microscope, with human assessment to find symmetric hysteresis loops. It is found that such features appear more affected by subsurface defects than the local domain structure. This work shows the utility of human–AI approaches for curiosity driven exploration of systems across experimental domains.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Advanced automation for space missions: Technical summary

Several representative missions which would require extensive applications of machine intelligence were identified and analyzed. The technologies which must be developed to accomplish these types of missions are discussed. These technologies include man-machine communication, space manufacturing, teleoperators, and robot systems.

Source record↗
NASA NTRS1981

Pneumatic inflatable end effector

The invention relates to an end effector device for robot or teleoperated type space vehicle which includes an inflatable balloon member carried on the end of tubular member which has a hollow center or conduit through which a suitable pressurized fluid is supplied. The device may be inserted into a variety of shaped openings or truss-type structures for handling in space.

Clark, K. H.↗
NASA NTRS1982

Technology assessment of advanced automation for space missions

Six general classes of technology requirements derived during the mission definition phase of the study were identified as having maximum importance and urgency, including autonomous world model based information systems, learning and hypothesis formation, natural language and other man-machine communication, space manufacturing, teleoperators and robot systems, and computer science and technology.

Source record↗
NASA NTRS1986

Seam tracking performance of a Coaxial Weld Vision System and pulsed welding

This report describes a continuation of a series of tests on the Coaxial Weld Vision System at MSFC. The ability of the system to compensate for transients associated with pulsed current welding is analyzed. Using the standard image processing approach for root pass seam tracking, the system is also tested for the ability to track the toe of a previous weld bead, for tracking multiple pass weld joints. This Coaxial Weld Vision System was developed by the Ohio State University (OSU) Center for Welding Research and is a part of the Space Shuttle Main Engine Robotic Welding Development System at MSFC.

Gangl, K. J.↗
NASA NTRS1988

Cartesian path control of a two-degree-of-freedom robot manipulator

The problem of cartesian trajectory control of a closed-kinematic chain mechanism robot manipulator with possible space station applications is considered. The study was performed by both computer simulation and experimentation for tracking of three different paths: a straight line, a sinusoid and a circle. Linearization and pole placement methods are employed to design controller gains. Results show that the controllers are robust and there are good agreements between simulation and experimentation. Excellent tracking quality and small overshoots are also evident.

Nguyen, Charles C.↗
NASA NTRS1988

The use of computer graphic simulation in the development of robotic systems

The use of computer graphic simulation techniques to resolve critical design and operational issues for robotic systems is described. Use of this technology will result in greatly improved systems and reduced development costs. The major design issues in developing effective robotic systems are discussed and the use of ROBOSIM, a NASA developed simulation tool, to address these issues is presented. Three representative simulation case studies are reviewed: off-line programming of the robotic welding development cell for the Space Shuttle Main Engine; the integration of a sensor to control the robot used for removing the Thermal Protection System from the Solid Rocket Booster; and the development of a teleoperator/robot mechanism for the Orbital Maneuvering Vehicle.

Fernandez, Ken↗
NASA NTRS1989

New results concerning the use of kinematically redundant manipulators in microgravity environments

This paper is concerned with the development of control strategies for kinematically redundant manipulators to be used in Space Station laboratories. These robots must be able to conduct experiments and manufacturing processes without disturbing the microgravity environment, and thus their dynamic base reactions/motions must be nearly eliminated. Redundant degrees of freedom permit the inverse kinematics problem to be solved in conjuction with the minimization of a cost function defined as a weighted sum of the base reactions. It is shown that the weights in the cost function should be used as an additional set of parameters in the minimization problem. The actual performance of the local optimal trajectory approach is demonstrated to be not as good as was previously reported.

Quinn, R. D.↗
NASA NTRS1990

Test Bed For Telerobots

Assembly of electromechanical and electronic equipment (including computers) constitutes test bed for development of advanced robotic systems for remote manipulation. Combines features not found in commercial systems. Its architecture allows easy growth in complexity and level of automation. System national resource for validation of new telerobotic technology. Intended primarily for robots used in outer space, test bed adapted to development of advanced terrestrial telerobotic systems for handling radioactive materials, dangerous chemicals, and explosives.

Matijevic, Jacob R.↗
NASA NTRS1989

Perceptual telerobotics

A sensory world modeling system, congruent with a human expert's perception, is proposed. The Experiential Knowledge Base (EKB) system can provide a highly intelligible communication interface for telemonitoring and telecontrol of a real time robotic system operating in space. Paradigmatic acquisition of empirical perceptual knowledge, and real time experiential pattern recognition and knowledge integration are reviewed. The cellular architecture and operation of the EKB system are also examined.

Ligomenides, Panos A.↗
NASA NTRS1990

Evolution and advanced technology

The NASREM architecture with its standard interfaces permits development and evolution of the Flight Telerobotic Servicer to greater autonomy. Technologies in control strategies for an arm with seven DOF, including a safety system containing skin sensors for obstacle avoidance, are being developed. Planning and robotic execution software includes symbolic task planning, world model data bases, and path planning algorithms. Research over the last five years has led to the development of laser scanning and ranging systems, which use coherent semiconductor laser diodes for short range sensing. The possibility of using a robot to autonomously assemble space structures is being investigated. A control framework compatible with NASREM is being developed that allows direct global control of the manipulator. Researchers are developing systems that permit an operator to quickly reconfigure the telerobot to do new tasks safely.

Ollendorf, Stanford↗
NASA NTRS1990

Dextrous robot hands

Recent studies of human hand function and their implications for the design of robot hands are discussed in reviews and reports. Topics addressed include human grasp choice and robotic grasp analysis, opposition space and human prehension, coordination in normal and prosthetic reaching, and intelligent exploration by the human hand. Consideration is given to a task-oriented dextrous manipulation architecture, the control architecture for the Belgrade/USC hand, the analysis of multifingered grasping and manipulation, and tactile sensing for shape interpretation. Diagrams, graphs, and photographs are provided.

Venkataraman, Subramanian T.↗
NASA NTRS1991

Testbed For Telerobotic Servicing

Telerobot testbed used to evaluate technologies for remote servicing, including assembly, maintenance, and repair. Enables study of advantages and disadvantages of modes and problems encountered in implementing them. Best technologies for implementing modes chosen. Provides delays simulating transmission delays between control stations on ground and orbiting spacecraft. Includes five major equipment subsystems, each consisting of such commercially available equipment as video cameras, computers, and robot arms. Used on Space Station and on Space Shuttle and satellites in orbit. Also used in hazardous and underwater environments on Earth.

Matijevic, Jacob R.↗
NASA NTRS1991

Architectures for intelligent machines

The theory of intelligent machines has been recently reformulated to incorporate new architectures that are using neural and Petri nets. The analytic functions of an intelligent machine are implemented by intelligent controls, using entropy as a measure. The resulting hierarchical control structure is based on the principle of increasing precision with decreasing intelligence. Each of the three levels of the intelligent control is using different architectures, in order to satisfy the requirements of the principle: the organization level is moduled after a Boltzmann machine for abstract reasoning, task planning and decision making; the coordination level is composed of a number of Petri net transducers supervised, for command exchange, by a dispatcher, which also serves as an interface to the organization level; the execution level, include the sensory, planning for navigation and control hardware which interacts one-to-one with the appropriate coordinators, while a VME bus provides a channel for database exchange among the several devices. This system is currently implemented on a robotic transporter, designed for space construction at the CIRSSE laboratories at the Rensselaer Polytechnic Institute. The progress of its development is reported.

Saridis, George N.↗
NASA NTRS1993

An expert system executive for automated assembly of large space truss structures

Langley Research Center developed a unique test bed for investigating the practical problems associated with the assembly of large space truss structures using robotic manipulators. The test bed is the result of an interdisciplinary effort that encompasses the full spectrum of assembly problems - from the design of mechanisms to the development of software. The automated structures assembly test bed and its operation are described, the expert system executive and its development are detailed, and the planned system evolution is discussed. Emphasis is on the expert system implementation of the program executive. The executive program must direct and reliably perform complex assembly tasks with the flexibility to recover from realistic system errors. The employment of an expert system permits information that pertains to the operation of the system to be encapsulated concisely within a knowledge base. This consolidation substantially reduced code, increased flexibility, eased software upgrades, and realized a savings in software maintenance costs.

Allen, Cheryl L.↗
NASA NTRS1996

STS-72 Post Flight Presentation

In this post flight presentation video for the STS-72 mission, the flight crew, Cmdr. Brian Duffy, Pilot Brent Jett, and Mission Specialists Daniel T. Barry, Winston E. Scott, Leroy Chiao, and Koichi Wakata (NASDA), discuss their mission using flight footage and slides. The pre-launch and launching activities are shown. Using the robot arm inside the space shuttle's cargo bay, the Japanese Space Flyer Unit (SFU) is retrieved and berthed and the Office of Aeronautics and Space Technology (OAST) Flyer satellite is deployed, retrieved, and reberthed. Chiao and Barry performed the first of the two 6 1/2 hour EVAs and Chiao and Scott performed the second. In both EVAs, the thermal properties of the new space suits were tested, along with new tools and equipment that will eventually be used to build the International Space Station. Space shuttle landing activities are also shown. Earth views include cloud shadows, Africa, Brazil, Australia, and Mt. Kilimanjaro.

Peterson, Glen↗
NASA NTRS1997

Neural Network Based Sensory Fusion for Landmark Detection

NASA is planning to send numerous unmanned planetary missions to explore the space. This requires autonomous robotic vehicles which can navigate in an unstructured, unknown, and uncertain environment. Landmark based navigation is a new area of research which differs from the traditional goal-oriented navigation, where a mobile robot starts from an initial point and reaches a destination in accordance with a pre-planned path. The landmark based navigation has the advantage of allowing the robot to find its way without communication with the mission control station and without exact knowledge of its coordinates. Current algorithms based on landmark navigation however pose several constraints. First, they require large memories to store the images. Second, the task of comparing the images using traditional methods is computationally intensive and consequently real-time implementation is difficult. The method proposed here consists of three stages, First stage utilizes a heuristic-based algorithm to identify significant objects. The second stage utilizes a neural network (NN) to efficiently classify images of the identified objects. The third stage combines distance information with the classification results of neural networks for efficient and intelligent navigation.

Kumbla, Kishan -K.↗