Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface transformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Dielectric and magnetic properties of microwave-absorbing FeAl x O y catalysts fabricated via solution combustion synthesis

Iron-based alumina (FeAl x O y ) nanocomposites are microwave-absorbers and catalysts, which makes them promising for emerging microwave-assisted thermocatalytic technologies. Solution combustion synthesis (SCS) has been used to synthesize FeAl x O y powders, and prior work has demonstrated that adjusting SCS parameters significantly changes phase composition and specific surface area of the products. However, it is unclear how synthesis parameters affect their microwave-absorbing properties, which are essential for optimizing microwave-assisted technologies. To address this challenge, in the present work, twelve different FeAl x O y products were synthesized at different combinations of the SCS parameters such as two fuels (citric acid and glycine), two heating modes (hotplate and muffle furnace), and three Fe:Al molar ratios (2:1, 1:1, 1:2). Dielectric and magnetic properties of the products were characterized using a network analyzer and a vibrating sample magnetometer. Based on the measured permittivity and permeability, penetration depth and reflection loss were calculated as a function of frequency and bed thickness. The products were heated by microwaves at 2.45 GHz and then examined with X-ray diffraction (XRD) analysis. For all products, the magnetic saturation was lower than for bulk iron oxides because of the small crystallite size and aluminum substitution. The use of glycine induced high dielectric losses and enabled fast microwave-heating rates compared to citric acid. Higher Fe:Al ratio also led to higher dielectric and magnetic losses. With glycine fuel, SCS in a furnace induced larger penetration depth and lower microwave absorption than SCS on a hotplate. The minimization of reflected power was more sensitive to the thickness of the product bed than to the frequency of the electromagnetic field. Post-heating XRD analysis revealed different phase transformations in the FeAl x O y powders depending on the SCS parameters. As a result, an FeAl x O y material, synthesized via incipient wetness impregnation, lacked magnetic losses and did not heat well as compared to the SCS products.

Combustion synthesis↗
DOE OSTI2025

Multi-energy ion irradiation effects and distinctive features of color center generation in yttria-stabilized zirconia driven by structural discrepancy

Regarding a requirement for inert matrix fuel (IMF) to burn minor actinides and plutonium and high-level waste immobilization, Yttria-stabilized zirconia (ZrO 2 -6.5 wt% Y 2 O 3 ) (YSZ) crystals with cubic phase are selected to comprehensively evaluate the irradiation resistance by irradiation-induced structural discrepancies across multiple energy conditions. Electronic excitation and nuclear collisions reveal distinct color centers, influenced by varying component ratios that reflect their formation mechanisms. Key factors driving ultra-fast structural transitions include collision cascades, pressure waves, and energy dissipation from electronic excitation. In this work, we find that in the electronic energy loss (E ele )-dominant region, internal latent tracks with unique surface nanostructures emerge, distinct from the defect clusters seen in the nuclear energy loss (E nuc )-dominant region, while the threshold for latent track formation and melting are identified. In conclusion, structural discrepancies driven by different energy-loss mechanisms promote the generation of singly ionized and nearest-neighbor doubly ionized oxygen vacancies, which respectively dominate the formation of F⁺ and T-centers, resulting in bandgap narrowing (4.80 eV → 4.73 eV), and furthermore triggering visible light emission (2.17 eV → 2.20 eV) in irradiated YSZ crystals, thus, enabling the design of novel irradiation-tailored material functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigation of Exciton Delocalization and Exciton Coherence in Chromophores and Acoustic Nanostructures

Quantum materials have a rich potential for providing transformative energy technologies ranging from new energy efficient computation paradigms to lossless energy transport across the national grid. The field of quantum materials, however, is still in its infancy with many quantum materials systems requiring cyrogenic temperatures to be viable. Few viable, room-temperature quantum materials systems have been identified; therefore, identifying additional such systems is vitally important. This state of the science combined with the low number of potential systems that exhibit room-temperature quantum character make this field of research fertile ground for EPSCoR states (states eligible for funding under the Established Program to Stimulate Competitive Research program) such as Idaho to compete on a national level. As a result, this project proposed and accomplished two main goals in advancing two room-temperature quantum materials systems: (1) advance the science for demonstrating room temperature exciton delocalization in two excitonic systems and (2) build capacity and expertise in developing and understanding quantum materials at both Boise State University and Idaho National Laboratory. The work at Boise State focused mainly on the use of nucleic acid self-assembled chromophore molecule networks that offer a much easier and mature approach to construct aggregates of chromophores that can be tailored to specific two-dimensional and three-dimensional geometries and allow exciton manipulation towards achieving room-temperature quantum computation. A second complementary effort performed at Boise State and INL focused on confining excitons on quantum length scales using coherent surface acoustic phonons

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mathematical Modeling of Hydroxide-Exchange-Membrane Water Electrolyzer

Water electrolyzers can transform intermittent renewable energy like solar energy and wind energy into the chemical energy of hydrogen with zero greenhouse-gas emissions. The hydroxide-exchange membrane electrolyzer (HEME) combines the capability to produce pressurized hydrogen with the advantage of being able to use low or non-platinum group metal (PGM) electrocatalysts in the alkaline environment.1 Hydroxide salts, for example, KOH, are added to the HEME water feed on both anode and cathode to improve its performance. However, the specific mechanism of performance improvement still needs to be further understood. In addition, at high current densities, bubble evolution can result in mass-transport limitations, a less well studied phenomena. Mathematical modeling is ideal to explore these issues as it is cost and time efficient and can deconvolute the physics, processes, and observed phenomena and study the applied-voltage breakdown. In this work, we extend our previously developed 1D two-phase continuum model2 to study the varies processes in the HEME and provide insights on performance optimizations. First, the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) kinetics at different hydroxide concentrations have been studied by rotating disk electrodes (RDE) and implemented in the model. Then, the model is calibrated and validated against experimental HEME polarization curves for different KOH concentrations as a liquid electrolyte. The model clearly shows a performance increase with increasing KOH concentrations, which is consistent with the experimental results. The reduced ohmic resistance and increased electrochemical active surface area (ECSA) are the two main reasons for performance increase. The large amount of hydroxide in the liquid electrolyte not only helps to distribute the reactant hydroxide throughout the catalyst layer (CL), which reduces ohmic loss, but also enables reaction at the interface between the liquid electrolyte and electrocatalyst, which increases the ECSA. Applied-voltage breakdown demonstrates that the electrolyzer performance is dominated by anode kinetics and ohmic loss. A comparison with the DI water feed shows a more uniform current distribution in the anode CL when KOH is added, which indicates a higher utilization of the CL. Second, we present modeling on the effects of bubble coverage. As gas evolves, part of the ECSA is minimized due to bubble coverage. To account for this effect, an empirical relationship between the fractional bubble coverage and the current density is implemented in the model.3 The model shows this bubble coverage effect is more pronounced at large current densities with DI water feed. Acknowledgements This work was funded under the HydroGEN Consortium by the Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, of the U. S. Department of Energy under contract number DE-AC02-05CH11231. References R. Abbasi, B. P. Setzler, S. Lin, J. Wang, Y. Zhao, H. Xu, B. Pivovar, B. Tian, X. Chen, G. Wu and Y. Yan, 31, 1805876 (2019). L. N. Stanislaw, M. R. Gerhardt and A. Z. Weber, ECS Transactions, 92, 767 (2019). H. Vogt and R. J. Balzer, Electrochimica Acta, 50, 2073 (2005).

Liu, Jiangjin↗
DOE OSTI2024

Solvation Environment and Interface Dynamics of Li 2 B 12 H 12 and Li 2 B 12 F 12 Electrolytes Uncovered by Theory and Operando Optical and FTIR Spectroelectrochemistry

In this work, we evaluated two closo-borate salts (Li 2 B 12 H 12 and Li 2 B 12 F 12 ) in propylene carbonate from theoretical and experimental perspectives to understand how the coordination environment influences their spectroscopic and electrochemical properties. The coordination environments of the closo-borate salts were modeled via density functional theory (DFT) and molecular dynamics (MD). Vibrational spectra calculated from the predicted coordination environments are in agreement with experimentally measured steady-state FTIR data. This theoretical investigation also suggested that Li 2 B 12 F 12 would possess a higher ionic conductivity than Li 2 B 12 H 12 , which was corroborated experimentally. Additionally, an electrochemical cell was designed and fabricated that enabled operando optical and FTIR spectroelectrochemical (OP-IR-SEC) measurements. This allowed for the simultaneous measurement of the relative changes of species at a lithium electrode-liquid electrolyte interface and the visualization of lithium plating at the electrode surface. This technique could provide new chemical insights and potentially link optical changes at the electrode–electrolyte interface to specific chemical species in similar electrochemical systems. The Li 2 B 12 F 12 electrolyte was found to have a higher thermal stability, which may find utility in applications for batteries that are subject to high-temperature conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unusual plastic strain-induced phase transformation phenomena in silicon

Pressure-induced phase transformations (PTs) in Si, the most important electronic material, have been broadly studied, whereas strain-induced PTs have never been studied in situ. Here, we reveal in situ various important plastic strain-induced PT phenomena. A correlation between the direct and inverse Hall-Petch effect of particle size on yield strength and pressure for strain-induced PT is predicted theoretically and confirmed experimentally for Si-I→Si-II PT. For 100 nm particles, the strain-induced PT Si-I→Si-II initiates at 0.3 GPa under both compression and shear while it starts at 16.2 GPa under hydrostatic conditions. The Si-I→Si-III PT starts at 0.6 GPa but does not occur under hydrostatic pressure. Pressure in small Si-II and Si-III regions of micron and 100 nm particles is ~5–7 GPa higher than in Si-I. For 100 nm Si, a sequence of Si-I → I + II → I + II + III PT is observed, and the coexistence of four phases, Si-I, II, III, and XI, is found under torsion. Retaining Si-II and single-phase Si-III at ambient pressure and obtaining reverse Si-II→Si-I PT demonstrates the possibilities of manipulating different synthetic paths. The obtained results corroborate the elaborated dislocation pileup-based mechanism and have numerous applications for developing economic defect-induced synthesis of nanostructured materials, surface treatment (polishing, turning, etc.), and friction.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Elucidating the speciation of extracted lanthanides by diglycolamides

Many studies over the past few decades have been devoted to addressing the application of diglycolamides (DGAs) for hydrometallurgical-based, f-element separations. Work to date has shown the molecular structure of a DGA derivative can have a significant impact on intra-lanthanide partitioning patterns. More recent studies have pushed towards probing the structure function relationship of the lanthanide-DGA complex to enable the design of more efficient lanthanide separation systems. Spectroscopic techniques, such as UV–Visible, Fourier Transformed Infrared Spectroscopy (FT-IR), Nuclear Magnetic Resonance (NMR), and Extended X-ray Absorption Fine Structure (EXAFS), provide information regarding the inner-sphere coordination of a given lanthanide-DGA complex. Scattering techniques, such as Dynamic Light Scattering (DLS), Small-Angle X-ray Scattering (SAXS), and Small-Angle Neutron Scattering (SANS), address nanoscale structures including aggregate sizes and morphology. Here, this review assesses the current state-of-knowledge regarding lanthanide-DGA hydrometallurgical (i.e., solvent extraction systems) interrogated using spectroscopic and scattering techniques to characterize the extracted Ln 3+ DGA species. Of particular interest to this review is the impact of varied diluents, inclusion and variation of phase modifiers, and DGA derivatization on system characteristics. While there has been extensive literature on the application of DGAs for f-element separations, the literature lacks a collective assessment of the speciation of Ln 3+ in the organic phase. This review provides new insights into the field of DGA separations, explicitly with an application to intra-lanthanide separations. Specifically, this review illustrates the importance of both the co-extraction anion (Cl - , NO 3 - , or ClO 4 - ) as it pertains to both the aggregate size and Ln 3+ distribution coefficient. It is evident the ability of the anion to disrupt the hydrogen bonding network limits both aggregate size and distribution coefficients according to the Hoffmeister series. This suggests the importance of the large, softer anions with a low charge-to-surface area ratio on encouraging hydrogen bond interactions. In addition, the co-extracted cation (H + vs Na + ) is important for mitigating transfer of Ln 3+ from the aqueous to the organic phase through extensive hydrogen bonding networks. These networks are responsible for forming supramolecular aggregates where a change in morphology is observed with increasing concentrations of H + and/or Ln 3+ in the organic phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

R&D Effort of Geologic Hydrogen Production at the National Renewable Energy Lab (NREL)

Geologic hydrogen (geoH2) is an emerging technology with massive current market interest and distinct potential to change the paradigm of hydrogen production. Two major subsurface processes influence the amount of geoH2 that are available for energy extraction: 1) geochemical reactions of H2O and Fe2+-bearing rocks which can produce hydrogen in the subsurface environment, where 2) various active microbial communities consume hydrogen as an energy source before the hydrogen reaches the surface. The net gain of hydrogen from these two competing processes dictates the production rate of geoH2. A recent study (Templeton et al., 2024) suggested that for most natural geoH2 systems, five orders of magnitude of production rate enhancement are needed to make geoH2 production economical in the near term. Effective enhancement of the production rate requires an in-depth understanding of the two geoH2 processes, in order to promote the H2-generating geochemical processes and suppress the H2-consuming microbial processes. However, current significant knowledge gaps in these two processes hinders the efforts to formulate strategies to enhance geoH2 production. The National Renewable Energy Laboratory (NREL) is a U.S. Department of Energy National Laboratory with the core mission of leading research, innovation, and strategic partnership to deliver solutions for a clean energy based economy. NREL's extensive research portfolio in hydrogen, bioenergy, geothermal, industrial decarbonization, and energy analysis makes us well positioned to conduct interdisciplinary research and facilitate technology deployment in the geoH2 space. In this presentation, we will discuss ongoing geoH2 research and engagement efforts at NREL, including: 1) geochemical investigation to understand the reaction mechanisms and production rate and potential of different source minerals and rocks, 2) microbiological investigation to understand methanogenesis and acetogenesis in the subsurface geoH2 environment, and identify effective inhibitors for these microbial processes, and 3) preliminary analysis for geoH2 production in the State of Minnesota, where abundant Fe-rich rocks for stimulated geoH2 production and ample opportunity to utilize geoH2 in transforming iron and steel industries are currently available.

08 HYDROGEN↗
DOE OSTI2020

Critical nuclei at hetero-phase interfaces

Two-step nucleation, in which a metastable intermediate phase acts as a precursor for nucleating a thermodynamically stable phase, has been widely observed in many materials systems and solid-state reactions. Among the advantages of two-step nucleation is that the stable phase may nucleate heterogeneously at the hetero-phase interface between the original and the precursory phases. Although heterogeneous nucleation (HN) theories for homo-phase grain boundaries and inert surfaces are well established, our understanding of HN at reactive hetero-phase interfaces remains incomplete. This deficiency stems from the discontinuity of the chemical potential driving force across the hetero-phase interface, which profoundly affects the fundamental properties of the nucleus in a way that is not properly accounted for in existing models. In this work, we incorporate these effects to extend the classical nucleation theory to HN at hetero-phase interfaces. Our extended model demonstrates that the nucleus shape along the minimum energy path is strongly size-dependent, and this additional degree of freedom can result in the reduction of the critical nucleus volume and associated activation energy barrier by orders of magnitude relative to conventional predictions. The simulation results are used to construct a sensitivity map in the parameter space of interfacial energy and bulk driving force ratios, which quantifies the difference in nucleation barriers predicted by different models.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Fostering a Guiding Multiscale Model for the Development of Advanced MgB 2 Hydrogen Storage Materials (Final Technical Report)

Project Goal and Objective. The demand for energy and for an upgraded energy infrastructure has steadily grown, as have the needs for energy independence and alternatives to our reliance on petroleum. Hydrogen is considered the most viable fuels for wide-scale implementation in the near future as it is less-polluting, non-toxic, and has more stored energy than petroleum. It is envisioned that hydrogen can eventually become the prime energy carrier, integrating the transportation, grid, and chemical sectors in a way that improves resiliency, diversifies feedstocks, and affords new economic opportunities. A key remaining challenge is the development materials with enhanced gravimetric and volumetric hydrogen storage capacities that offer a higher performance than compressed gas. These materials would eliminate the need for large-scale compression, thereby dramatically reducing the footprint and cost of gas storage. The high gravimetric and volumetric hydrogen capacities of complex hydrides has prompted an intensive investigation of the potential of this class of materials as hydrogen storage media over the past 25 years. Among the many complex hydrides that have been explored, magnesium borohydride, Mg(BH 4 ) 2 , has been found to possess the best combination of practical thermodynamic properties. These include a gravimetric H 2 density of 14.9 wt% H 2 and thermodynamics for the dehydrogenation of Mg(BH 4 ) 2 to MgB 2 (equation 1) (ΔH° = 39 kJ/mol H 2 , ΔS = 112 J/K mol H 2 ) which lie in the narrow window required Mg(BH 4 ) 2 $\Leftrightarrow$ MgB 2 + 4 H 2 (1) for reversibility under moderate pressure and temperature. However, overcoming the extremely slow kinetics of the reversible release of hydrogen by this material in the solid state is a daunting challenge. At temperatures greater than 400 °C, the borohydride releases up to 14 wt% hydrogen giving MgB 2 . We discovered that the direct re-hydrogenation of MgB 2 to Mg(BH 4 ) 2 can be accomplished under 950 bar H 2 at 400 °C. While this demonstrated that complete reversibility can be achieved, the conditions employed are far too extreme for commercial hydrogen storage applications. More recently, we found through US DOE funded research projects (EERE HyMARC and HySCOR), that hydrogen cycling, can be accomplish at much milder conditions upon modification of the borohydride or boride. Guided by these discoveries these discoveries, the objective of this research project was to obtain key information that will enable the development of a model of reversible hydrogenation of MgB 2 to Mg(BH 4 ) 2 . The ultimate goal of our efforts is to attain a model of this transformation that can be utilized to accelerate development further advanced materials. This project directly follows on discoveries that were made over the course of a US DOE, EERE HyMARC project that was focused on improvement of the hydrogen cycling kinetics of modified MgB 2 . We found that that mechanical milling with graphene results the desired, pronounced kinetic enhancement. The dramatic lowering of the conditions required for the hydrogenation of MgB 2 is a significant step towards overcoming its chemical inertness allowing its development as a practical onboard hydrogen storage material. However, the exact nature of the modification(s) of MgB 2 that is responsible for its activation towards hydrogenation is completely unknown. This situation is not unique, as efforts to develop hydrogen storage materials typically have a narrow focus rather than a comprehensive approach that takes atomic level bonding and structure; molecular dynamics; long range, nano- and mesoscale-structure and their interconnection all into account. The goal of this project was the development of a comprehensive, multi-scale computational model of reversible hydrogenation of MgB 2 to Mg(BH 4 ) 2 that can be utilized for development of higher performance versions of the modified material. Development of the model requires determination of: 1) the bulk, nano-scale, and meso-scale structural changes occurring at elevated pressure following mechano-chemical modification of MgB 2 ; 2) the reaction pathway of the reversible hydrogenation of MgB 2 to Mg(BH 4 ) 2 ; 3) the effect of elevated pressure and mechano-chemical modification on the chemical reaction pathways; 4) the interactions at solid-gas interfaces; and particle surfaces; and 5) the kinetics and thermodynamic parameters associated with each step of the hydrogenation reaction pathway. This investigation required advanced techniques as preliminary, standard XRD, 11 B NMR, and FTIR analysis showed no signs of material modification. In order to gain this level of understanding of modified MgB 2 , required the teaming of a diverse group of experts and state-of-the art experimental capabilities at the University of Hawaii at Manoa (UHM) and collaborating National Laboratories: Craig Jensen , Department of Chemistry (PI and Project Director), solid state, solution, and high pressure NMR spectroscopy; solid-state synthesis; and high pressure hydrogenation (collaboration with SNL); Godwin Severa , Hawaii Natural Energy Institute (co-PI) calorimetry; infrared and Raman spectroscopy (collaboration with NREL); Dera , high pressure X-ray diffraction including in situ experiments (collaboration with ANL); Hope Ishii , Hawaii Institute of Geophysics electron microscopy investigations (collaboration with LBNL); and Joe Brown , Mechanical Engineering , material electronic structure and electric field effects.

08 HYDROGEN↗
DOE OSTI2022

Crosslinked Polyethyleneimine Gel Polymer Interface to Improve Cycling Stability of RFBs

Redox flow batteries are considered a promising technology for grid energy storage. However, capacity decay caused by crossover of active materials is a universal challenge for many flow battery systems, which are based on various chemistries. In this paper, using the vanadium redox flow battery as an example, we demonstrate a new gel polymer interface (GPI) consisting of crosslinked polyethyleneimine with a large amount of amino and carboxylic acid groups introduced between the positive electrode and the membrane. The GPI functions as a key component to prevent vanadium ions from crossing the membrane, thus supporting stable long-term cycling. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were conducted to investigate the effect of GPI on the electrochemical properties of graphitic carbon electrodes (GCFs) and redox reaction of catholyte. X-ray photoelectron spectroscopy (XPS) and 1 H nuclear magnetic resonance (NMR) spectra demonstrated that the crosslinked GPI is chemically stable for 100 cycles without dissolution of polymers and swelling in the strong acidic electrolytes. Results from inductively coupled plasma mass spectrometry (ICP-MS), Fourier-transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray (EDX) spectroscopy proved that the GPI is effective in maintaining the concentration of vanadium species in their respective half-cells, resulting in improved cycling stability because of it prevents active species from crossing the membrane and stabilizes the oxidation states of active species.

Lim, Hyung-Seok↗
DOE OSTI2026

Microchannel-based Membrane-less Extraction of Li from Unconventional Lithium Sources & the Separation of REE

This final report provides an overview of the Project's entire duration, covering July 1, 2021 to December 31, 2023. It primarily focuses on the achievements, technological developments, and unique challenges the team faced while working on separating and extracting Lithium from produced waters. The project's primary aim was to create an integrated, high-throughput, membrane-less, and modular microfluidic platform that could extract Lithium from unconventional sources. We have successfully met all goals and milestones envisioned in the SOPO document. The most critical primary milestones, including the Go-No-Go milestone (refer to the Gantt chart in the Appendices), were successfully accomplished. We demonstrated phase separation (>90%) and extraction (>85%) performance in the MPSE using synthetic, and representative produced water composition feed at 50 ml/min total flow through MPSE 36. We have also performed a parametric study of the MPSE operations, beyond the scope of SOPO, exploring operating conditions of current and broader interest. The extended investigation of operational parameters is concurrent with our efforts to seek further development of the MPSE technology beyond the scope of the Project. Along these lines of development, we have made efforts to be responsive to DOE calls for technological developments of other types of resources (beyond PW) for the recovery of Critical Materials and higher TRL development (beyond TRL 4). During the work on this Project, we developed and implemented three innovative technical approaches that emerged from our efforts to successfully meet the Project milestones. The innovative & original technical approaches developed and implemented in this Project are now the contributions to process engineering that could be clearly credited to the Project. First, Convergent Design Approach is a comprehensive feedforward & feedback loop of four design phases: i) design for functionality, ii) design for manufacturing, iii) design for sustainability, and iv) design for market. Next was Process Intensification. A major aim of this Project was to create an innovative phase separation & extraction microscale-based technology for Li separation – thus the words microchannel-based in the Project title. A microscale-based technology is intrinsically in the center of the Process Intensification domain as defined by its unique principles. Therefore, Process Intensification was implicitly envisioned in the Project’s SOPO. Lastly, Time Scale Analysis is a novel tool for discovering the needs and directions of Process Intensification implementations in any process technology. This Project is fully credited for developing and implementing the three novel technical approaches mentioned above. These are general contributions to process engineering that emerged from this Project. Beyond the original SOPO scope, the OSU-U.Pitt research group utilized a Convergent Design methodology, integrating first-principles mathematical modeling with experimental validation on the Minimum Development Vehicle. By creating these Digital Twins, the team rapidly assessed manufacturing iterations to support TEA analysis. This framework further enabled the development of advanced Surface Modification Techniques, where hydrophobic and oleophobic coating strategies were optimized via Digital Twin tools and validated through rigorous 100-hour longevity testing. TEA Analysis: The closing efforts of this Project were focused on the TEA analysis. TEA analysis had two primary functions: i) enabling critical assessments of design variations withing 10 the Concurrent Design Approach, thus enabling evolution of the MPSE design to reach faster- better-cheaper alternatives; and ii) to create a bridge between the accomplishments of this Project and future projects of higher TRL, beyond TRL 6 level. It is important to note that the TEA model created in the Project stirred the technological solutions for the recovery of critical materials toward a vision of a very profitable modular plant that has unique zero-waste water discharge signature. More importantly, thanks to our experimental performance data and conservative assumptions, the TEA model predicts minimal technological and investment risks. Low cost of a modular unit of a nominal capacity of [1000 tons of Li 2 CO 3 /year] positions the MPSE based technology within the reach of community investors, thus offering a paradigm shift in the development of critical technologies. The project successfully navigated two primary challenges: solvent selection and manufacturing adaptation. Restricted by the SOPO to existing literature for lithium recovery, the team identified a critical need for a "material excellence program" to develop next-generation solvents, eventually concluding with a preliminary investigation into promising Ionic Liquids (ILs). Simultaneously, COVID-19 supply chain disruptions forced a pivot from traditional manufacturing to advanced additive methods at ATAMI-OSU. By transitioning from stainless steel to 3D-printed polymer substrates, the team achieved a transformative three-order-of- magnitude reduction in manufacturing costs and compressed prototyping timelines from several months to just two days. The MPSE technology offers significant energy, environmental, and economic advantages by overcoming the traditional bottlenecks of phase-separation hardware and contactor size. Unlike conventional mixer-settlers or membrane-based systems, MPSE operates without moving parts or fouling-prone membranes, achieving robust performance even with challenging, viscous, or particulate-heavy feeds. Key performance metrics include an energy intensity reduction of 5–50x (3–40 kJ/m 3 ) compared to incumbent technologies and a dramatic reduction of processing time to under 60 seconds, which drastically reduces the physical plant footprint. These technical efficiencies translate into superior economic outcomes; for a 100 t/year Li 2 CO 3 facility, implementing MPSE is projected to nearly halve contactor CAPEX (from $\$$6.08M to $\$$3.01M) and significantly increase the project's Net Present Value (NPV), derisking new investment and enabling distributed critical-mineral processing configurations. The commercialization of MPSE technology is being spearheaded by Vigsur Dynamics Inc., which has adopted a structured, parallel approach to technical and business development since its formation in January 2026. Following extensive customer discovery and engagement with the Oregon State University accelerator, Vigsur Dynamics is working to establish a business model that transitions from pilot demonstrations to modular hardware sales, ultimately aiming for a "build-own-operate" service strategy. Current technical milestones—including 100 hours of continuous operation, superior energy efficiency, and successful 6-unit modular scale-up— provide a foundation for this transition. Backed by ongoing IP licensing and a growing network of industrial and venture advisors, the company is actively de-risking the platform to replace conventional mixer-settler systems in the critical minerals market.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Vapor-Phase Heteroatom Incorporation into Semiconductive Molecular-Scale Magic-Size Clusters

Magic-size metal chalcogenide clusters of molecular size exhibit well-defined structure and unique properties that might be further expanded with the incorporation or substitution of a second metal. Here, we report the postmodification of magic-size clusters synthesized in polymer thin films via exposure to volatile metal organic precursors commonly utilized for atomic layer deposition. Exposure of In 6 S 6 (CH 3 ) 6 clusters to dimethylcadmium results in exposure-dependent incorporation of Cd 2+ , which extends the optical absorbance of the clusters into the visible spectrum. The mechanism for Cd 2+ incorporation is consistent with Cd 2+ replacement of In 3+ that includes methyl ligand removal to maintain charge neutrality. Even for clusters embedded in a polymer matrix, ligand loss leads to sintering and transformation into larger nanoscale aggregates with zinc blende-type structure. The extent of Cd incorporation can be modulated by varying the process temperature and volatile metal organic exposure as well as the choice of volatile metal organic precursor. A computational thermodynamic analysis of heteroatom incorporation for several metals and chemistries reveals that both the stability of the substituted cluster and the favorability of reaction byproducts jointly determine the favorability of cation incorporation.

atomic layer deposition↗
DOE OSTI2021

Multi-mode lasing in terahertz metasurface quantum-cascade VECSELs

To date, terahertz quantum-cascade vertical-external-cavity surface-emitting lasers (QC-VECSELs) have tended to oscillate in only one or two lasing modes at a time. This is due to the fact that the interaction between all of the longitudinal external cavity modes and the QC gain material is mediated through a single metasurface resonance, whose spatial overlap changes little with frequency; this suppresses spatial-hole-burning induced multi-mode operation. In this Letter, a VECSEL external cavity is demonstrated using an output coupler based upon a high-resistivity silicon etalon, which presents a periodic reflectance spectrum that is nearly matched with the external cavity mode spectrum. As the cavity length is varied, a systematic transition between a single/double-mode lasing regime and a multi-mode lasing regime is realized due to the Vernier effect. Up to nine modes lasing simultaneously with a free-spectral-range of approximately 21 GHz is demonstrated. Furthermore, this result provides a path toward the multi-mode operation necessary for eventual frequency comb operation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Development of Explainable, Knowledge-Guided AI Models to Enhance the E3SM Land Model Development and Uncertainty Quantification

Focal Area(s): (2)Predictive modeling using AI techniques and AI-derived model components; use of AI and other tools to design a prediction system comprising of a hierarchy of models. (3) Insight gleaned from complex data (both observed and simulated) using AI, big data analytics, and other advanced methods, including explainable AI and physics- or knowledge- guided AI. Science Challenge: The Energy Exascale Earth System Model (E3SM) is a fully coupled, state-of-the-science Earth system model that uses code optimized for DOE's advanced computers to address the most critical scientific questions facing our nation and society (Golaz et al., 2019). The E3SM Land model (ELM) is designed to understand how the changes in terrestrial land surfaces will interact with other Earth system components and has been used to understand hydrologic cycles, biogeophysics, and ecosystem dynamics. In spite of great successes, the ELM has several known issues that restrain rapid improvements. For example, the ELM uses equilibrium models to simulate dynamic land-climate interactions and it requires long model spin-up time to identify suitable initial conditions for transient simulations. The ELM lacks built-in uncertainty mechanisms that can improve the robustness of model predictions. The ELM is a holistic, deterministic model system with a rigid design, and in many situations, it is hard to modify the ELM system to incorporate new theory/hypothesis and new data across scales to address emerging science problems (such as predicting the impacts of water cycle extremes). In addition, The ELM is technically optimized for traditional CPU-centric computers and it cannot fully utilize the current and incoming leadership computers for model simulations and uncertainty quantification (UQ). The success of artificial intelligence (AI) has inspired scientists to use AI models to discover intrinsic features from simulation data (Chattopadhyay et al., 2020) and observational data (Reichstein et al., 2019) to gain further process understanding of Earth science problems. However, autonomous AI model training through deep learning usually requires a huge amount of annotated data. To overcome the limitations from the data and computing resources, knowledge-guided AI models are necessary where human-knowledge is ingested in model construction (Banino et al., 2018) and training process (Silver et al., 2016) for efficient learning. Herein, we present a new way that leverages the process understanding from the ELM to guide AI model development for the ELM enhancement and UQ. We hope this study can inspire further Earth and environmental system model developments and transformations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

All-digital Sensor System for Distributed Downhole Pressure Monitoring in Unconventional Fields

This project developed and validated (through field tests) a new low-cost all-digital pressure sensing technology for in situ distributed downhole pressure monitoring in unconventional oil and gas (UOG) fields. The all-digital sensing technology uses a built-in non-electric analog-to-digital converter (ADC) to transform the pressure information into a combination of binary (ON/OFF) states. As such, the system does not need downhole electronics for signal conditioning and telemetry. The all-digital sensors can be remotely logged over a long distance, and many sensors can be multiplexed for distributed sensing. Based on a review of unconventional wells in the Lower 48 states, the specification of the sensor is to measure pressure up to 69 MPa (10,000 psi) and temperature up to 250°C. A sensor with a helical bourdon sensing element and a digital signal decoder of 50 mm diameter and 109 mm length was constructed. The helical bourdon sensing element was made of 304L stainless steel and filled with motor oil. The digital converter was made up of 8 digital reading pads constructed of high-temperature epoxy with conductive inserts made of stainless steel. The sensor had a linear response to pressure with an accuracy of 0.14 MPa (20 psi). To withstand the high pressure, the sensor was enclosed in a stainless-steel pressure housing with a wall thickness of 5.5 mm, a diameter of 73 mm, and a length of 724 mm. In the laboratory tests, the sensor exhibited no temperature-related effects on the results. The sensor did not show drift over a 14-day test period at elevated pressure. A field test was conducted where the sensor was deployed in a test wellbore at the Quest drilling test facility to a depth of 0 feet over three weeks. The sensor was attached to the production rods, along with a downhole reference sensor of PPS27 type, which is a permanent downhole monitoring system. During the testing phase, the test well annular blow-out preventer was closed, and the well was pressurized at the surface to 11 MPa (1600 psi). The sensor read the elevated bottom hole pressure of 1500 psi. A multiplexing unit was created for the sensor to deploy multiple sensors on one data transmission line in a distributed approach. The multiplexing unit was tested in a simulated environment of 3048 m (10,000 ft) with five sensors distributed. The sensors were pressurized at different intervals. The multiplexed sensors recorded the correct pressure, and the multiplexing did not interfere with the readings. The proposed concept of an all-digital pressure sensor for harsh downhole environments was designed, manufactured, and tested in the laboratory and tested at the field to a up to 69 MPa and 250°C. This technology has high-temperature tolerance and has potential in downhole areas outside oil and gas, such as carbon capture and storage (CCS) and geothermal wells. The sensor concept has been proven in this project, but to create a commercially viable product, manufacturing a sensor with a smaller diameter needs to be performed.

02 PETROLEUM↗
DOE OSTI2024

Photoelectrochemical CO 2 Reduction to CO Enabled by a Molecular Catalyst Attached to High-Surface-Area Porous Silicon

A high-surface-area p-type porous Si photocathode containing a covalently immobilized molecular Re catalyst is highly selective for the photoelectrochemical conversion of CO 2 to CO. It gives Faradaic efficiencies of up to 90% for CO at potentials of –1.7 V (versus ferrocenium/ferrocene) under 1 sun illumination in an acetonitrile solution containing phenol. Here, the photovoltage is approximately 300 mV based on comparisons with similar n-type porous Si cathodes in the dark. Using an estimate of the equilibrium potential for CO 2 reduction to CO under optimized reaction conditions, photoelectrolysis was performed at a small overpotential, and the onset of electrocatalysis in cyclic voltammograms occurred at a modest underpotential. The porous Si photoelectrode is more stable and selective for CO production than the photoelectrode generated by attaching the same Re catalyst to a planar Si wafer. Further, facile characterization of the porous Si-based photoelectrodes using transmission mode FTIR spectroscopy leads to highly reproducible catalytic performance.

14 SOLAR ENERGY↗
DOE OSTI2022

Ab initio calculations for void swelling bias in α - and δ -plutonium

Void swelling can develop in materials under persistent irradiation when nonequilibrium vacancy and self-interstitial populations migrate under sufficiently asymmetric interaction biases. In conventional metals, the propensity is determined to the first approximation by comparing point-defect relaxation strains. We thus present DFT-based calculations of structures and formation energies and volumes of point defects in the α and the δ phases of plutonium. Here we discuss the pros and cons of various levels of electronic structure theory: spin polarization, spin-orbit coupling, and orbital polarization. Our results show that lattice defects in δ-Pu, in contrast to most fcc metals, have surprisingly small formation volumes. Equally unexpected are the large defect formation volumes found in the low-symmetry α-Pu phase. Both these unusual properties can be satisfactorily explained from defect-induced spin/orbital moment formation and destruction in the Pu phases. Surprisingly, the point defects in α-Pu are found to induce far larger transformation of the local electronic structure than in δ-Pu. When we use the calculated defect properties to estimate the classic void swelling bias in each of the phases, we find it to be unusually small in δ-Pu but likely much larger in α-Pu. Hence, swelling rates and mechanisms can diverge dramatically between the different phases of Pu. Especially in the transient regime before the formation of large defect clusters, the swelling rate of α-Pu can reliably be expected to be much larger than δ-Pu. However, accurate forecasts over longer times will require the conventional void-swelling theory to be modified to handle the complexities presented by the different Pu phases. As a case in point, we show the possible anomalous temperature dependence of vacancy properties in δ-Pu, caused by entropic contributions from defect-induced spin-lattice fluctuations. Such complications may affect defect-defect interactions and thus alter the void swelling bias.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗