Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “State Variable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

A physical model for the reverse leakage current in (In,Ga)N/GaN light-emitting diodes based on nanowires

We investigated the origin of the high reverse leakage current in light emitting diodes (LEDs) based on (In,Ga)N/GaN nanowire (NW) ensembles grown by molecular beam epitaxy on Si substrates. To this end, capacitance deep level transient spectroscopy (DLTS) and temperature-dependent current-voltage (I-V) measurements were performed on a fully processed NW-LED. The DLTS measurements reveal the presence of two distinct electron traps with high concentrations in the depletion region of the p-i-n junction. These band gap states are located at energies of 570 ± 20 and 840 ± 30 meV below the conduction band minimum. The physical origin of these deep level states is discussed. The temperature-dependent I-V characteristics, acquired between 83 and 403 K, show that different conduction mechanisms cause the observed leakage current. On the basis of all these results, we developed a quantitative physical model for charge transport in the reverse bias regime. By taking into account the mutual interaction of variable range hopping and electron emission from Coulombic trap states, with the latter being described by phonon-assisted tunnelling and the Poole-Frenkel effect, we can model the experimental I-V curves in the entire range of temperatures with a consistent set of parameters. Our model should be applicable to planar GaN-based LEDs as well. Furthermore, possible approaches to decrease the leakage current in NW-LEDs are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterizing forecastability of wind sites in the United States

With the rapid growth of wind power, managing its uncertainty and variability becomes critical in power system operations. Wind forecasting is one of the enablers to partially tackle challenges associated with wind power uncertainty. To improve the 'forecasting ability', defined as forecastability, different forecasting methods have been developed to assist grid integration of wind energy. However, forecasting performance not only relies on the power of forecasting models, but is also related to local weather conditions and (known as wind characteristics) wind farm properties. In this study, geospatial and instance spatial distributions of six wind characteristics and two forecasting error metrics are first analyzed based on 126,000 + wind sites in the United States. Forecasts in different look-ahead times are generated by using a machine learning based multi-model forecasting framework model and the Weather Research and Forecasting model. A forecastability quantification method is developed by characterizing the relationship between forecastability and wind series entropy using three regression methods, i.e., linear approximation, locally weighted scatterplot smoother nonlinear nonparametric regression, and quantile regression. It is found that the forecastability of a wind site can be successfully characterized by wind series characteristics, thereby providing valuable information at different stages of wind energy projects.

17 WIND ENERGY↗

A projection gradient method for computing ground state of spin-2 Bose–Einstein condensates

In this paper, a projection gradient method is presented for computing ground state of spin-2 Bose–Einstein condensates (BEC). We first propose the general projection gradient method for solving energy functional minimization problem under multiple constraints, in which the energy functional takes real functions as independent variables. We next extend the method to solve a similar problem, where the energy functional now takes complex functions as independent variables. We finally employ the method into finding the ground state of spin-2 BEC. The key of our method is: by constructing continuous gradient flows (CGFs), the ground state of spin-2 BEC can be computed as the steady state solution of such CGFs. We discretized the CGFs by a conservative finite difference method along with a proper way to deal with the nonlinear terms. We show that the numerical discretization is normalization and magnetization conservative and energy diminishing. Numerical results of the ground state and their energy of spin-2 BEC are reported to demonstrate the effectiveness of the numerical method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fine-Scale Variability of Observed and Simulated Surface Albedo Over the Southern Great Plains

Surface albedo can be highly variable in both space and time. The Department of Energy’s Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems (HI-SCALE) field study provides a unique opportunity to characterize the variability over the Southern Great Plains of the United States using integrated tower, aircraft, and satellite observations of the surface albedo and Normalized Difference Vegetation Index (NDVI). The primary advantage of the aircraft and satellite observations is the ability to examine the spatial distribution of surface albedo and NDVI over a large area, while the tower measurements have the ability to examine both diurnal and day-to-day variability at a single location. In general, consistency was found between both the broadband (BB) albedo and NDVI measured from the surface, air and space. There was a small increase from 0.186 to 0.194 in the aircraft BB surface albedo between May and September (about 4% change), while the MODIS black-sky BB surface albedo increased from 0.151 to 0.166 over the same period (about 10% change) while the standard deviations in the aircraft and MODIS BB albedo were similar. The largest seasonal differences in both the aircraft BB albedo and NDVI were found for areas with winter wheat or forest, while areas with pasture or grasses showed a smaller seasonal diversity. The Weather Research and Forecasting (WRF) model was used to simulate the BB surface albedo. In comparison with the aircraft and satellite observations, the WRF-simulated BB surface albedo had no seasonal change and a much narrower distribution.

Berg, Larry K.↗

The Role of Input Assumptions and Model Structures in Projections of Variable Renewable Energy: A Multi-Model Perspective of the U.S. Electricity System

Recent wind and solar deployment in the United States has grown at unprecedented rates, but the extent to which this growth will continue is a key question. Energy-economic planning models are often used to develop future projections of these technologies, and although it is well-understood that model outcomes are sensitive to assumptions about technology developments and market conditions, it is less clear how underlying model structures might impact outcomes. For wind and solar technologies, model structures might be an even larger driver due to the complexity required to represent their variability, uncertainty, and location-dependence. Here, we apply three state-of-the-art electric sector planning models to evaluate variable renewable generation under different conditions with both harmonized and native input assumptions to isolate the impact that model structures might have on deployment outcomes. We find growth in wind and solar deployment in all models under a business-as-usual scenario (without new policies), where the median value for variable renewable energy generation share is found to be 27% by 2050 - but with a wide range of estimates (18-43%), types of renewable technologies deployed, and regional distributions across models. With harmonized assumptions about technology costs and market conditions the range narrows slightly, but a large range in penetration outcomes remains (24-41% by 2050) suggesting that model representations play significant roles in projections of future wind and solar deployment. We also assess the implications of achieving 55% wind and solar penetration by 2050 - to assess potential challenges at higher penetration levels - and the magnitude of variable generation under a carbon-constrained future. Finally, we identify research needs to better assess the future deployment of variable renewable energy.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Parameterized anomalous transport model for current-carrying collisionless plasmas in pulsed power inertial confinement fusion

Current delivery in pulsed power inertial confinement fusion is influenced by collisionless current-carrying microturbulent plasmas, which are sourced from electrode surfaces. In this setting, the lower hybrid drift instability—triggered by plasma acceleration—is a leading candidate driver of difficult-to-predict momentum and energy transport. To characterize the nonlinear state of the microturbulent plasma, a parameterized anomalous transport model is developed for the instability, with analytic formulas for anomalous collision frequency, resistivity, and species heating rates. The formulas are expressed in terms of linear-theory variables and four dimensionless parameters that characterize the macroscopic plasma state. The model is built on linear theory analysis, power law analysis, and quasilinear theory analysis, and is validated using a series of nonlinear continuum kinetic Vlasov–Poisson simulations. The theoretical and computational investigation demonstrates that the anomalous collision frequency associated with the instability can be reliably approximated, within about a factor of five or better, by the unscaled linear theory growth rate of the fastest-growing wavenumber mode. This finding enables efficient calculation of anomalous resistivity and species heating rates over a wide range of plasma conditions, resulting in improved predictive capabilities.

Complex functions↗

Rigidity of the Laughlin Liquid

We consider general N-particle wave functions that have the form of a product of the Laughlin state with filling factor 1/ℓ and an analytic function of the N variables. This is the most general form of a wave function that can arise through a perturbation of the Laughlin state by external potentials or impurities, while staying in the lowest Landau level and maintaining the strong correlations of the original state. We show that the perturbation can only shift or lower the 1-particle density but nowhere increase it above a maximum value. Consequences of this bound for the response of the Laughlin state to external fields are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

BPS operators from the Wilson loop in the 3-dimensional supersymmetric Chern-Simons theory

We consider the small deformation of the pointlike Wilson loop in the 3-dimensional N=6 superconformal Chern-Simons theory. By Taylor expansion of the pointlike Wilson loop in powers of the loop variables, we obtain the BPS operators that correspond to the excited string states of the dual IIA string theory on the pp wave background. The BPS conditions of the Wilson loop constrain both the loop variables and the forms of the operators obtained in the Taylor expansion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact of amorphous pockets on displacement damage evolution in silicon

Silicon has long been known to exhibit amorphization in response to heavy particle bombardment. For doses below the total amorphization threshold, partial amorphization is observed in the form of scattered amorphous pockets. While extensive research has gone into modeling the formation and evolution of amorphous pockets in response to irradiation, no studies yet investigate their impact on the evolution of other damage such as interstitial supersaturation and clustering. In this study, we survey the impact of amorphous pockets on defect evolution in silicon when treated as static sinks. MD is first used to show that amorphous pockets provide energetically favorable sites for point defects relative to the crystalline bulk, supporting the hypothesis that they act as sinks. A 0-D cluster dynamics model is then constructed, taking an interstitial clustering model from the literature and including amorphous pockets as a sink species. We conduct our survey for temperatures between 30 and 400 °C and sink strengths between 1 to 6 x 10 10 cm −2 . Both implantation- and radiation-induced damage states are investigated using interstitial and vacancy concentrations as initial condition variables. We find that, due to the differing migration rates of the interstitial and the vacancy, amorphous pockets have a non-monotonic impact on the final damage state depending on the effective sink strength of the amorphous pockets, resulting in increased damage formation in regimes of intermediate amorphization. In conclusion, this result emphasizes the important role of amorphous pockets in governing the evolution of damage in partially amorphized crystalline materials.

36 MATERIALS SCIENCE↗

Fundamental quantum limits on phase-insensitive linear amplification and phase conjugation in a practical framework

We present experimentally testable quantum limitations on the phase-insensitive linear amplification and phase conjugation with respect to the transformation of a Gaussian-distributed set of coherent states following the footing to assess the success of continuous-variable quantum teleportation and quantum memory devices. The results enable us to compare the real device with the quantum-limited device via the feasible input of coherent states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characteristics and estimates of double parton scattering at the Large Hadron Collider.

We evaluate the kinematic distributions in phase space of 4-parton final-state subprocesses produced by double parton scattering, and we contrast these with the final-state distributions that originate from conventional single parton scattering. Our goal is to establish the distinct topologies of events that arise from these two sources and to provide a methodology for experimental determination of the relative magnitude of the double parton and single parton contributions at Large Hadron Collider energies. We examine two cases in detail, the bb{sup -} jet-jet and the 4 jet final states. After full parton-level simulations, we identify a few variables that separate the two contributions remarkably well, and we suggest their use experimentally for an empirical measurement of the relative cross section. We show that the double parton contribution falls off significantly more rapidly with the transverse momentum p{sub T}{sup j1} of the leading jet, but, up to issues of the relative normalization, may be dominant at modest values of p{sub T}{sup j1}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the dineutrino system kinematic variables in dileptonic top quark pair production in proton-proton collisions at $\sqrt{s}=13$ TeV

Differential top quark pair production cross sections are measured in the dilepton final states e + e − , μ + μ − , and e ± μ ∓ , as a function of kinematic variables of the two-neutrino system: the transverse momentum $p^{vv}_{\textrm{T}}$ of the dineutrino system, the minimum distance in azimuthal angle between $\vec{p}^{vv}_{\textrm{T}}$ and leptons, and in two dimensions in bins of both observables. The measurements are performed using CERN LHC proton-proton collisions at $\sqrt{s}=13$ TeV, recorded by the CMS detector between 2016 and 2018, corresponding to an integrated luminosity of 138 fb −1 . The measured cross sections are unfolded to the particle level using an unregularized least squares method. Results are compared with predictions by the standard model of particle physics, and found to be in agreement with theoretical calculations as well as Monte Carlo simulations.

Hadron-Hadron Scattering↗

Application of advanced causal analyses to identify processes governing secondary organic aerosols

Abstract Understanding how different physical and chemical atmospheric processes affect the formation of fine particles has been a persistent challenge. Inferring causal relations between the various measured features affecting the formation of secondary organic aerosol (SOA) particles is complicated since correlations between variables do not necessarily imply causality. Here, we apply a state-of-the-art information transfer measure coupled with the Koopman operator framework to infer causal relations between isoprene epoxydiol SOA (IEPOX-SOA) and different chemistry and meteorological variables derived from detailed regional model predictions over the Amazon rainforest. IEPOX-SOA represents one of the most complex SOA formation pathways and is formed by the interactions between natural biogenic isoprene emissions and anthropogenic emissions affecting sulfate, acidity and particle water. Since the regional model captures the known relations of IEPOX-SOA with different chemistry and meteorological features, their simulated time series implicitly include their causal relations. We show that our causal model successfully infers the known major causal relations between total particle phase 2-methyl tetrols (the dominant component of IEPOX-SOA over the Amazon) and input features. We provide the first proof of concept that the application of our causal model better identifies causal relations compared to correlation and random forest analyses performed over the same dataset. Our work has tremendous implications, as our methodology of causal discovery could be used to identify unknown processes and features affecting fine particles and atmospheric chemistry in the Earth’s atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of 3D Oxide–Metal Hybrid Metamaterial for Tailorable Light–Matter Interactions in Visible and Near-Infrared Region

Dielectric–metallic hybrid metamaterials exhibit extraordinary optical properties due to the light–matter interactions at the dielectric–metallic interfaces. The ability in precision control of the light–matter interactions in nanoscale is key to tailor the optical properties of hybrid metamaterials. In this work, a complex 3D framework of multilayered self-assembled BaTiO 3 (BTO)-Au hybrid thin films is demonstrated with such precision control of the light–matter interaction in nanoscale. Here, unique “bamboo-like” Au nanostructures are formed via the bilayer and trilayer stacking of BTO-Au hybrid layers with interlayers of SrTiO 3 , CeO 2 , or MgO. Different film strain states introduced by the three interlayers result in variable diameter and density of Au nanopillars. Both simulated and experimental optical data demonstrate the localized surface plasmon resonance change and hyperbolic dispersion wavelength shift in visible to near-infrared because of the effective tuning of the Au nanopillar aspect ratio and free electron density. The highly tunable optical properties along with the ferroelectric behavior and thermal robustness of the 3D hybrid film enable it to be a great candidate for multifunctional applications. This study demonstrates a unique 3D approach for precision optical property tuning and combined functionalities in oxide–metal metamaterial systems toward future integrated photonic and electronic devices.

36 MATERIALS SCIENCE↗

Compressional wave velocity and effective stress in unsaturated soil: Potential application for monitoring moisture conditions in vadose zone sediments

Compressional seismic (P-wave) velocities were measured experimentally at different water potentials and confining pressure states using a variety of sediments collected from the US Department of Energy Hanford Site in southeastern Washington State. P-wave velocity was measured in variably saturated sediments using ultrasonic piezoelectric transducers and water potential was measured with a heat dissipation sensor. We propose a model to relate changes in P-wave velocity to soil stress conditions using an effective stress formulation that includes capillary stress as well as adsorptive stress. We show that compressional wave velocities can be related to water potential and confining stress using a model with five fitted parameters. A single set of parameters provides an excellent fit to data acquired from all of the sediment samples. Under very dry conditions, corresponding to low water potentials, water flow occurs in adsorptive thin films associated with very low unsaturated hydraulic conductivities. The results presented here suggest the utility of seismic methods for establishing low water potential and flow conditions within variably saturated Hanford formation sediments and providing feedback on the performance of mitigation efforts such as soil desiccation and surface infiltration barriers. Seismic methods can provide minimally invasive, three-dimensional information on relevant flow conditions in vadose zone sediments as well as changes that occur over time.

Linneman, Dorothy C.↗

High-order fully implicit solver for all-speed fluid dynamics: AUSM ride from nearly incompressible variable-density flows to shock dynamics

We introduce a novel Newton–Krylov (NK)-based fully implicit algorithm for solving fluid flows in a wide range of flow conditions—from variable density nearly incompressible to supersonic shock dynamics. The key enabling feature of our all-speed solver is the ability to efficiently solve conservation laws by choosing a set of independent variables that produce a well-conditioned Jacobian matrix for the linear iterations of the global nonlinear iterative solver. In particular, instead of choosing to discretize the conservative variables (density, momentum, total energy), which is traditionally used in Eulerian high-speed compressible fluid dynamics, we demonstrate superior performance by discretizing the primitive variables—pressure–velocity–temperature in the very low-Mach flow limits or density–velocity–temperature/entropy in the shock dynamics range. Moreover, our method allows us to avoid direct inversion of the mass matrix in discrete time derivatives, which is usually an additional source for stiffness, especially pronounced when going to very high-order schemes with non-orthogonal basis functions. Here, we show robust solutions obtained for discontinuous finite element discretization up to seventh-order accuracy. Another important aspect of the solution algorithm is the Advection Upstream Splitting Method (AUSM), adopted to compute numerical fluxes within our reconstructed discontinuous Galerkin (rDG) spatial discretization scheme. The use of the low-Mach modification of the hyperbolic flux operator is found to be necessary for enabling robust simulations of very stiff liquids and metals for Mach numbers below M=10 -5 , which is well known to be very computationally challenging for compressible solvers. We demonstrate that our fully implicit rDG-NK solver with the AUSM + -up flux treatment produces efficient and high-resolution numerical solutions at all speeds, ranging from vanishing Mach numbers to transonic and supersonic, without substantial modifications of the solution procedures. (At high speed, we add limiting and use a simpler preconditioning of the Krylov solver.) Numerical examples include nearly incompressible constant-property flow past a backward-facing step with heat transfer, low-Mach variable-property channel flow of water at supercritical state, phase change and melt pool dynamics for laser spot welding and selective laser melting in additive manufacturing, and Mach 3 flow in a wind tunnel with a step.

97 MATHEMATICS AND COMPUTING↗

The MOOSE fluid properties module

The Fluid Properties module within the Multiphysics Object-Oriented Simulation Environment (MOOSE) is used to compute fluid properties for numerous applications, ranging from nuclear reactor thermal hydraulics to geothermal energy. Those applications drove the development of the module to enable numerous different fluid equations of states, property lookups with primitive and conserved flow variable to cater to pressure and density-driven solvers, and an object-oriented design facilitating expansion and maintenance. Each fluid property is implemented in its own class but inherits capabilities such as automatic differentiation, automated out-of-bounds handling or variable conversion capabilities. Here, this paper presents the module, its design, its user and developer interface, its content in terms of fluids and properties, and several of its applications showing its major role in the MOOSE simulation ecosystem.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗