Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Material Attractiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Unlocking large compressive strains in thin active elastocaloric layers

Elastocaloric cooling attracts broad interest and rapidly growing attention due to its potential for high efficiency and low environmental impact. While it is common knowledge that triggering reversible entropy and temperature changes with stress applied in compression prevents rapid failures of materials, realizing this regime in elastocaloric systems is highly challenging because nearly all geometries suited for efficient heat transfer are prone to buckling even under modest loads. This work describes a concept of a novel composite, where an active NiTi layer is embedded into a polymer support structure such that the elastocaloric material is entirely in compression when the assembly is subjected to bending. The active layer achieves 8.1 K temperature change at 2.5% compressive strain without buckling. After 10,000 cycles at 2% compressive strain, the composite maintains mechanical integrity without degradation of the elastocaloric effect. The results demonstrate that NiTi and, potentially, other elastocalorically active materials in geometries previously thought impossible can be successfully implemented in regenerative cooling systems operating in compression.

42 ENGINEERING↗
DOE OSTI2020

Dry-pressed lithium nickel cobalt manganese oxide (NCM) cathodes enabled by holey graphene host

There is an increasing demand for electric vehicle batteries with higher energy densities that can be manufactured with low cost utilizing environmentally friendly processes. Lithium nickel cobalt manganese oxides (NCM), such as LiNi(0.5)Co(0.2)Mr(0.3)O(2) (NCM523), are commonly used in commercial lithium ion batteries for electric vehicle applications. These cathodes are typically fabricated using environmentally hazardous, energy intensive, and time-consuming solvent-based slurry casting processes. Polymeric binders, also required for cathode preparation, add weight and can undergo parasitic reactions during battery cycling. Here we report a facile, solvent-free, binder-free, and rapid cold-press electrode fabrication process to prepare high mass loading NCM cathodes within minutes. This process is enabled by the use of holey graphene, a unique lightweight, compressible carbon nanomaterial that serves as both a binder and an electrically conductive matrix. NCM cathodes fabricated by this method are stable and exhibit good active material utilization. A significant advantage for the dry-press process is that the electrode mass loadings can be readily increased simply by adding more composite powder to the compression molding die, resulting in improved areal capacities that are attractive for applications requiring high energy per unit footprint. (C) 2020 Elsevier Ltd. All rights reserved.

25 ENERGY STORAGE↗
DOE OSTI2021

Iron-iminopyridine complexes as charge carriers for non-aqueous redox flow battery applications

Non-aqueous redox flow batteries (RFBs) have been gaining increased attention in the energy storage arena. Some of their attractive features include the promise for high energy densities, wider voltage windows compared to aqueous systems, as well as wider operating temperature ranges. One of the major challenges in the development of these systems is the lack of electroactive materials that can undergo reversible redox events within the larger potential window of organic solvents. In this paper, we present the design, synthesis, and measurement of electrochemical properties of some iron-based imine- and iminopyridine complexes as promising candidates for RFB applications. Synthesized complexes afforded three reversible redox couples over a ~3 V range. The redox events were also computationally explored and are in good agreement with experimental data. Theoretical calculations show that the redox event at the positive potential can be characterized as metal-centered event corresponding to Fe 3+ → Fe 2+ reduction, while the two redox events at negative potentials are associated with the consecutive reductions of iminopyridine or diimine moieties. This work has led to the identification of a promising anolyte material, [tris(imino)pyridine)Fe][OTf] 2 (1), which is soluble in acetonitrile and is synthesized in two simple steps. This species shows outstanding performance when cycled between 1.0 V and 2.35 V, with 93% coulombic efficiency, 84% energy efficiency, and a capacity decay rate of 0.61% per cycle at 5 mA cm –2 . Further modifications to this kind of charge carrier may lead to the development of high energy density materials for grid scale energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Demonstration of active neutron interrogation of special nuclear materials using a high-intensity short-pulse-laser-driven neutron source

Detecting shielded special nuclear material, such as nuclear explosives, is a difficult challenge pursued by non-proliferation, anti-terrorism, and nuclear security programs worldwide. Interrogation with intense fast-neutron pulses is a promising method to characterize concealed nuclear material rapidly but is limited by suitable source availability and proven instrumentation. In this study we have pioneered a demonstration of such an interrogation method using a high-intensity, short-pulse, laser-driven neutron source that offers potential benefits compared to conventional neutron sources. The measurement results reported here represent the first experimental demonstration of this interrogation approach on enriched uranium items and demonstrate the feasibility of a precise measurement using realistic nuclear materials, representative of field scenarios, even with just a single laser-driven neutron pulse. Bright pulsed sources can overcome the nuisance background of items with strong internal neutron sources, improving analytical power, while single-shot assay is attractive in high-throughput situations where time is at a premium. The science and technology of this type of neutron production is developing rapidly, and we anticipate that practical mobile interrogation systems will become available based on the detection concepts demonstrated here to meet the growing measurement needs.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
NASA NTRS1991

Thermal characterization and toughness of ethynyl containing blends

As part of an effort to develop high performance structural resins with an attractive combination of properties for aerospace applications, a series of ethynyl-terminated polysulfones of different molecular weights were prepared and blended with a low molecular weight ethynyl-terminated coreactant. Upon heating above 200 C, these ethynyl containing materials react to form a chain extended and crosslinked network structure. This reaction renders the materials insoluble in common solvents, but also reduces the toughness as compared to high molecular weight linear polysulfones. The thermal characterization of these blends and the toughness of the resulting cured materials are discussed.

Jensen, Brian J.↗
NASA NTRS2001

Adaptive-Grid Methods for Phase Field Models of Microstructure Development

Modeling solidification microstructures has become an area of intense study in recent years. The properties of large scale cast products, ranging from automobile engine blocks to aircraft components and other industrial applications, are strongly dependent on the physics that occur at the mesoscopic and microscopic length scales during solidification. The predominant morphology found in solidification microstructures is the dendrite, a tree-like pattern of solid around which solidification proceeds. The microscopic properties of cast products are determined by the length scales of these dendrites, and their associated segregation profiles. For this reason understanding the mechanisms for pattern selection in dendritic growth has attracted a great deal of interest from the experimental and theoretical communities. In particular, a great deal of research has been undertaken to understand such issues as dendrite morphology, shape and growth speed. Experiments on dendrite evolution in pure materials by Glicksman and coworkers on succinonitrile (SCN), and more recently pivalic acid (PVA), as well as other transparent analogs of metals, have provided tests of theories for dendritic growth, and have stimulated considerable theoretical progress. These experiments have clearly demonstrated that in certain parameter ranges the physics of the dendrite tip can be characterized by a steady value for the dendrite tip velocity, radius of curvature and shape. Away from the tip, the time-dependent dendrite exhibits a characteristic sidebranching as it propagates, which is not yet well understood. These experiments are performed by observing individual dendrites growing into an undercooled melt. The experiments are characterized by the dimensionless undercooling. Most experiments are performed at low undercooling.

Dantzig, Jonathan A.↗
NASA NTRS1999

High Temperature Thermosets

A thermoset or network polymer is an organic material where the molecules are tied together through chemical bonds (crosslinks) and therefore they cannot move past one another. As a result, these materials exhibit a certain degree of dimensional stability. The chemical composition and the degree of crosslink density of the thermoset have a pronounced effect upon the properties. High temperature thermosets offer a favorable combination of properties that makes them attractive for many applications. Their most important features are the excellent processability particularly of the low molecular weight precusor forms, the chemical and solvent resistance and the dimensional stability. The market for high temperature thermosets will increase as new uses for them are uncovered and new thermosets with better combinations of properties are developed.

Hergenrother, Paul M.↗
NASA NTRSDate not supplied

Assimilating Lessons Learned – From URGE to NASA's Student Airborne Science Activation (SaSa) Project

In the first half of 2021, formal and informal pods at several universities and NASA Center affiliates participated in the Unlearning Racism in Geosciences (URGE) curriculum and deliverables. As a result, several members from different URGE pods are propagating and applying the URGE lessons learned to the new 5-year NASA Student Airborne Science Activation project (SaSa). Starting in the Summer of 2022, SaSa will provide an 8-week summer Earth Science research experience focused on attracting and retaining early undergraduate students from historically underrepresented groups from minority-serving institutions (MSIs). The multicenter and field-based research experience will provide the students access to and experience with NASA airborne resources. Additionally, integrating NASA material into the MSI curricula and providing student mentorship at both MSIs and NASA Centers will enhance students' exposure to Earth Science research. The objectives of URGE and SaSa are highly compatible with one another, and the project timing allows for the integration of URGE lessons early in the SaSa curriculum design phase. As of December 2021, the first SaSa summer program application will be open and the first SaSa semester at the host MSIs will be completed. This presentation will discuss the assimilation of URGE lessons learned from our respective pods into the first SaSa academic semester and into the preparations for the first SaSa summer cohort. We will welcome additional feedback from the broader URGE community in advance of SaSa's first summer session.

Kristina Pistone↗
NASA NTRSDate not supplied

Scalable Variable Charge Molecular Dynamics Simulations of Metal-Oxide Systems

Interfaces between metals and oxides are an important feature in many technologically relevant materials, e.g., oxidation of metal surfaces, oxide-dispersion strengthened (ODS) alloys, dielectric components, and thermal barrier coatings among others. Experimental studies of such interfaces are challenging since the majority are buried within the bulk, making computational modeling an attractive alternative. Molecular dynamics (MD) simulations operate at the length scales relevant to many interface-mediated mechanisms, but the requisite interatomic potentials for metal-oxide systems require computationally expensive variable charge schemes to account for the disparate bonding types, thus often limiting their effectiveness. Here we introduce several improvements to the charge transfer interatomic potential (CTIP) model which enable greater computational efficiency for large scale MD simulations. Then, using a new CTIP parametrization for the Ni-O system, we demonstrate its capabilities to capture critical atomic scale mechanisms associated with metal-oxide interfaces. Long time scale simulations (>10 ns) are used to investigate high temperature oxidation and oxide precipitation from the melt, and large length scale simulations (> 1 million atoms) are used to study the interaction of dislocations with oxide particles. We have implemented the new CTIP model in the widely used, open-source MD code LAMMPS.

Gabriel Plummer↗
DOE OSTI2020

Helium Ion Microscopy

Nanotechnology research led to the development of various instruments to be used for imaging or fabrication. The helium ion microscope (HIM) became available in 2006 but quickly gained popularity. Its unique gas field ion source enables high-resolution imaging, nanofabrication, direct write, and the recent combination with a secondary ion mass spectrometer offers chemical imaging with ~15 nm resolution. Particularly attractive are the small interaction volume of He and Ne (the two gases offered), small beam spot size, and a moderate sputtering rate. Additionally, the HIM is an excellent imaging tool for insulating samples in soft, polymeric, and biological materials. It can be expected that helium ion microscopy will continue to have a strong influence on broad range of scientific disciplines, including chemistry, materials science, and biology.This chapter aims at providing an overview of the current status of HIM for imaging, analysis, and nanofabrication. It introduces the reader to key components of the instrument, theoretical background, and latest results in the areas of imaging, material fabrication, and chemical analysis capabilities of helium ion microscopy.

Belianinov, Alex↗
DOE OSTI2020

Understanding effects of conductive additives in lithium-sulfur batteries

Since 2009, lithium-sulfur (Li-S) batteries have been attracting much research interest, ascribed to their high energy density and cost-effectiveness. However, their S cathodes are harassed by the poor conductivity, shuttling of lithium polysulfides (LPSs), and large volume change. In improving conductivity of S cathodes, carbon materials are widely used as conductive additives. However, there still lacks a comparative study on their geometric and structural effects in Li-S batteries. To this end, a systematic investigation is conducted on two different typical conductive additives, carbon black (CB) 1 and nitrogen-doped graphene nanosheets (N-GNS) 2 . This work reveals that, compared to the zero-dimensional (0D) CB nanoparticles, the two-dimensional (2D) N-GNS is structurally less defective and has a larger surface area. Furthermore, as a result, the 2D structure of the N-GNS helps achieve higher capacity retention but inhibits Li-ion transportation. In comparison, the 0D structure of the CB facilitates the transportation of Li-ions with a higher initial capacity but exposed to a severer shuttling behavior of LPSs. It is also found that a combination of the CB and N-GNS enables better performance of Li-S batteries, in terms of sustainable capacity, Coulombic efficiency, and rate capability. This study is inspiring for designing better S cathodes for Li-S batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Dopamine-Mediated Polymer Coating Facilitates Area-Selective Atomic Layer Deposition

Area-selective atomic layer deposition (ALD) has the potential to significantly improve current fabrication approaches by introducing a bottom-up process in which robust and conformal thin films are selectively deposited onto patterned substrates. This bottom-up approach requires selective areas of the substrates to be masked to inhibit deposition. Spontaneous self-assembly and organization of a mask, incorporating adhesion and other functions, are particularly attractive for this role as they do not require a separate patterning step. In this work, we make use of the pH/light tunability of catechol adhesion to develop a catechol-functionalized polymer that exhibits tunable adhesion strengths on different materials based on their specific chemistry. Tunable selective deposition was shown between metal/metal oxide substrates by controlling the local pH. Moreover, by controlling the adhesion strength through UV light, the deposition of hafnium oxide (HfO 2 ) during ALD was successfully inhibited.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Anisotropy of antiferromagnetic domains in a spin-orbit Mott insulator

The temperature-dependent behavior of magnetic domains plays an essential role in the magnetic properties of materials, leading to widespread applications. However, experimental methods to access the three-dimensional (3D) magnetic domain structures are very limited, especially for antiferromagnets. Over the past decades, the spin-orbit Mott insulator iridate Sr 2 IrO 4 has attracted particular attention because of its interesting magnetic structure and analogy to superconducting cuprates. Here, in this work, we apply resonant x-ray magnetic Bragg coherent diffraction imaging to track the real-space 3D evolution of antiferromagnetic ordering inside a Sr 2 IrO 4 single crystal as a function of temperature, finding that the antiferromagnetic domain shows anisotropic changes. The anisotropy of the domain shape reveals the underlying anisotropy of the antiferromagnetic coupling strength within Sr 2 IrO 4 . These results demonstrate the high potential significance of 3D domain imaging in magnetism research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Phonon dynamics in the site-disordered Kitaev spin liquid

The Kitaev honeycomb model provides a paradigmatic example of an exactly solvable quantum spin liquid (QSL), where spins fractionalize into itinerant Majorana fermions coupled to a static background of ℤ 2 gauge fluxes. This model has attracted significant interest due to its potential experimental realization in spin-orbit Mott insulators like 𝛼−RuCl 3 . Among various experimental techniques, ultrasound measurements of sound attenuation have emerged as a promising approach to detect spin fractionalization in these materials. However, deviations from the ideal Kitaev model, often due to disorder, introduce localized modes that dominate the low-energy physics. To investigate these effects, we calculate the sound attenuation coefficient in the site-disordered Kitaev honeycomb model under an applied magnetic field that breaks time-reversal symmetry. Our analysis reveals that quasilocalized modes from quasivacancies impact the phonon self-energy, yet the sound attenuation coefficient maintains its sixfold symmetry and linear temperature dependence at low temperatures, even with disorder. This robustness underscores sound attenuation's reliability as a probe for spin fractionalization. As a result, we show that this linear behavior persists under an external field and in the random-flux sector, highlighting the persistent influence of fractionalized excitations, despite disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Modified atomic layer deposition of MoS 2 thin films

As one of the most attractive transition metal dichalcogenides (TMDs), the growth of molybdenum disulfide (MoS 2 ) with industrial compatibility is of great importance. Atomic layer deposition (ALD) has been shown to be a promising method to achieve the growth of high-quality TMD materials. However, MoS 2 films deposited by ALD often are amorphous with nonideal stoichiometry and require high-temperature post-deposition annealing. Here, we introduce a modified ALD recipe using Mo(CO) 6 and H 2 S, resulting in controllable linear growth behavior, a S-to-Mo ratio of 2:1, and crystalline films at a temperature as low as 190 °C. The growth mechanisms and key factors leading to this improvement are proposed and complemented by kinetics calculations. This newly developed methodology relies on aligning the process time with the reaction kinetics of carbonyl disassociation. The MoS 2 films prepared herein were shown to be active hydrogen evolution reaction catalysts.

2D materials↗
DOE OSTI2020

Water on Actinide Dioxide Surfaces: A Review of Recent Progress

The fluorite structured actinide dioxides (AnO 2 ), especially UO 2 , are the most common nuclear fuel materials. A comprehensive understanding of their surface chemistry is critical because of its relevance to the safe handling, usage, and storage of nuclear fuels. Because of the ubiquitous nature of water (H 2 O), its interaction with AnO 2 has attracted significant attention for its significance in studies of nuclear fuels corrosion and the long-term storage of nuclear wastes. The last few years have seen extensive experimental and theoretical studies on the H 2 O–AnO 2 interaction. Herein, we present a brief review of recent advances in this area. We focus on the atomic structures of AnO 2 surfaces, the surface energies, surface oxygen vacancies, their influence on the oxidation states of actinide atoms, and the adsorption and reactions of H 2 O on stoichiometric and reduced AnO 2 surfaces. Finally, a summary and outlook of future studies on surface chemistry of AnO 2 are given. We intend for this review to encourage broader interests and further studies on AnO 2 surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1984

Lunar origin: role of giant impacts

The explanation that lunar origin involved giant impacts remains attractive. Large planetesimals are consistent with current accretion models, and may have been widely scattered in the early solar system; their existence is a reasonable, assumption in Moon origin models. Isotopic data require the Moon's formation primarily from local material resembling Earth's upper mantle, not material from elsewhere in the solar system. Giant impacts are stochastic, class predictable events that would provide the required type of ejected Earth mantle material without requiring large moons to form near other planets (a problem with less stochastic processes). Such material may have mixed with incoming meteorites during lunar formation, affecting lunar chemistry.

Hartmann, W. K.↗