Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IONIC CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Optimization of catholyte for halide-based all-solid-state batteries

Halide solid electrolytes gain significant attention due to their high ionic conductivity, low processing temperature, dry air compatibility, and high-voltage stability. However, low cathode active material (CAM) loading in the composite cathode constrains the realization of high energy density for halide-based all-solid-state batteries. In this study, three halide materials, raw Li 3 YBrCl 5 (LYBC-R, <30μm), milled LYBC (LYBC-M, <5 μm) and freeze-dried Li 3 InCl 6 (LIC, <500 nm), were used as catholytes, combined with LYBC-M as the electrolyte and LiIn alloy as the anode. The CAM:catholyte ratio was investigated as well as stack pressure and operating temperature. Our study demonstrates that particle size of the catholyte plays an important role only for high CAM loading or high C-rate cycling. At moderate CAM loading (65 and 70wt% LiNi 0.83 Mn 0.06 Co 0.11 O 2 ) and 0.1 C-rate, all the three catholytes perform well, providing initial discharge capacities >177 mAh/g. At high CAM loading (85wt%) and 0.1 C-rate, a cathode with the nano-scale LIC catholyte provides discharge capacity of 175 mAh/g, while the larger particle size catholytes suffer significantly reduced capacity. Both LYBC and LIC catholytes provided capacity retention >80% after 200 cycles at 0.5C. These results imply that cathode particle size is critically important for performance at high CAM loading. Furthermore, both electrolyte and cathode were tape cast to scale up size and prepare realistic layer thicknesses. A small amount of binder was used in both layers, to balance the electrochemical performance and mechanical properties. Further, the discharge capacity of a tape cell was 152mA h/g at 0.1C with a capacity retention of 81.8% after 20 cycles at 0.5C. The results demonstrate the excellent performance of LYBC as an electrolyte, and provide guidance for halide-based cathode design.

25 ENERGY STORAGE↗

Composite biopolymer electrolytes for high-performance reversible zinc-air batteries

Zinc-air batteries (ZABs) are regarded as one of the most promising candidates for next-generation energy storage systems due to their inherent safety, high energy density, and low cost. In this study, we optimized the composition of gel polymer electrolytes (GPEs), which play a crucial role in enhancing ZAB reversibility due to their water retention capabilities. The GPEs are synthesized using a combination of polyacrylic acid (PAA), polyacrylamide (PAM), and biopolymer kappa-carrageenan (KC), with and without additional additives. Among these, the composite GPE containing KC, PAA, and PAM demonstrated superior ionic conductivity (6.68 mS/cm at 30 °C) and enhanced water retention compared to the PAA–PAM-based GPE. Furthermore, this composite electrolyte operates within a wider electrochemical window of −1.0 V–2.2 V. A bifunctional catalyst, nickel–iron layered double hydroxide (NiFe-LDH), is electrochemically synthesized on a modified activated carbon cloth (CC). The catalyst loading is optimized based on oxygen evolution reaction (OER) performance, showing an overpotential of 555 mV. The oxygen reduction reaction (ORR) occurred at a half-wave potential of 0.620 V, which is lower than that of Pt/C (0.852 V), indicating better catalytic activity. The KC based cell exhibit better cycling stability than PAA–PAM-based GPE. The electrochemical performance of ZAB cells is evaluated under various atmospheres: ambient air and humid conditions and temperatures. Notably, in a humid environment, the cells achieved extended cycling stability, operating for over 500 h—significantly longer than under open-air conditions. Overall, this study highlights the importance of tailored GPE design and efficient bifunctional catalysts to enhance the performance and longevity of zinc-air batteries for long-duration energy storage applications.

Catalyst↗

Predicting Si-Anode Calendar Life Using Machine Learning: Correlating Electrolyte Properties and Electrochemical Signals

This study evaluates novel electrolytes tailored for Si-containing anodes to promote calendar-life. Drawing inspiration from advancements in electrolytes for Li-metal cells, the work investigates correlations between predicted electrolyte properties and measured electrochemical performance using several machine-learning models. By leveraging machine learning and advanced modeling techniques, this study aims to establish predictive frameworks that accelerate calendar-aging experiments and inform rational electrolyte design for Si-containing cells. In the present study, fifteen different electrolytes are evaluated in a Si-containing cell using an accelerated calendar-life protocol. For each electrolyte considered, 87 properties (features) from the Advanced Electrolyte Model were produced to identify key property/performance relationships. In this study, the best performing electrolytes were generally those formulations that included non-coordinating fluoroether solvents, and the most predictive features for long-term calendar-life were features related to salt concentration and electrolyte viscosity as well as early capacity, ionic conductivity, and Coulombic efficiency measurements. The framework developed in this study correlating electrolyte properties to measured electrochemical performance is expected to accelerate electrolyte design for Si-containing anodes and ultimately enable high-energy-density, long-life Li-ion batteries.

25 - ENERGY STORAGE↗

Vanadium-enhanced Na 2 FePO 4 F cathodes for high-performance sodium-ion batteries

Sodium fluorophosphate Na 2 FePO 4 F holds great potential for sodium-ion batteries due to its high theoretical capacity, excellent structural stability, abundant resources, and affordability. However, its poor electronic and ionic conductivities limit its practical applications. Therefore, ion doping and carbon coating have been employed as synergistic strategies in this study to overcome these limitations. A one-step, energy-efficient solid-state method using sucrose as a carbon coating source was used to synthesize Na 2 FePO 4 F/C (NFPF/C) and its doped variant, Na 2 Fe 0.85 V 0.1 PO 4 F/C (NFVPF/C). 23 Na-MAS-NMR spectra confirm the existence of two distinct sites for sodium (Na1/Na2). The ex-situ 23 Na-MAS-NMR performed at different states-of-charge reveals the activity of only one sodium. The scanning electron microscopy findings reveal a reduction in the particle size with V-introduction, enhancing the energetic performances. NFVPF/C delivers higher specific capacity of 122 mAh g −1 compared to 116 mAh g −1 for NFPF/C at 0.1C. It also demonstrates improved cycling stability, retaining 81 % of its initial capacity after 120 cycles, in contrast to 46 % for the pristine material. The doped phase outperforms the pristine at higher current rates, delivering specific capacities of 81 and 55 mAh g −1 at 2C and 3C, respectively, compared to 35 and 17 mAh g −1 for NFPF/C.

25 ENERGY STORAGE↗

The structure, composition, and performance impact of a YSZ-GDC interdiffusion layer in solid oxide electrolysis cells

This study provides a combined experimental and computational investigation into the structure and impact of the cation interdiffusion layer that appears at the gadolinium doped ceria (GDC)/yttria stabilized zirconia (YSZ) interface in solid oxide electrolysis cells (SOECs). Scanning transmission electron microscopy (STEM) illustrates that a ∼0.4 μm interdiffusion layer (IDL) with an intermixed cation distribution and fine grain size forms upon sintering. STEM identifies that the interdiffusion layer exists in the cubic fluorite structure despite changes in cation composition. The interdiffusion layer microstructure formed during sintering does not change during SOEC testing at either 1.3V or heightened voltage pulse testing. Modeling predicts that ionic conductivity may decrease in the interdiffusion layer due to Coulombic trapping between mobile oxygen vacancies and excess Gd 3+ acceptor dopants. Yet, the density and continuous nature of the layer should benefit cell stability by substantially reducing the formation of SrZrO 3 , which is corroborated by STEM and Synchrotron X-ray diffraction (XRD). We conclude that the interdiffusion layer acts as a beneficial barrier to Sr diffusion, when operating in a regime where electrolyte void formation is not observed.

organic↗

Alkali metal – yttrium borohydrides: The link between coordination of small and large rare-earth

The system Li–A–Y–BH{sub 4} (A=K, Rb, Cs) is found to contain five new compounds and four further ones known from previous work on the homoleptic borohydrides. Crystal structures have been solved and refined from synchrotron X-ray powder diffraction, thermal stability of new compounds have been investigated and ionic conductivity measured for selected samples. Significant coordination flexibility for Y{sup 3+} is revealed, which allows the formation of both octahedral frameworks and tetrahedral complex anions with the tetrahydroborate anion BH{sub 4} both as a linker and terminal ligand. Bi- and trimetallic cubic double-perovskites c-A{sub 3}Y(BH{sub 4}){sub 6} or c-A{sub 2}LiY(BH{sub 4}){sub 6} (A=Rb, Cs) form in all the investigated systems, with the exception of the Li–K–Y system. The compounds with the stoichiometry AY(BH{sub 4}){sub 4} crystallize in all investigated systems with a great variety of structure types which find their analog amongst metal oxides. In-situ formation of a new borohydride – closo-borane is observed during decomposition of all double perovskites. - Graphical abstract: The system Li–A–Y–BH{sub 4} (A=K, Rb, Cs) is found to contain five novel compounds and four further ones previously reported. Significant coordination flexibility of Y{sup 3+} is revealed, which can be employed to form both octahedral frameworks and tetrahedral complex anions, very different structural topologies. Versatility is also manifested in three different simultaneously occurring coordination modes of borohydrides for one metal cation, as proposed by DFT optimization of the monoclinic KY(BH{sub 4}){sub 4} structural model observed by powder diffraction. - Highlights: • The system Li-A-Y-BH{sub 4} (A=K, Rb, Cs) contains nine compounds in total. • Y{sup 3+} forms octahedral frameworks and tetrahedral complex anions. • Bi- and trimetallic double-perovskites crystallize in most systems. • Various AY(BH{sub 4}){sub 4} crystallize with structure types analogous to metal oxides. • Double-perovskites decompose and form a novel borohydride-closo-borane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal chemistry of the orthorhombic Ln{sub 2}TiO{sub 5} compounds with Ln=La, Pr, Nd, Sm, Gd, Tb and Dy

The crystal structures of seven samples of orthorhombic (Pnma) Ln{sub 2}TiO{sub 5} compounds with Ln=La, Pr, Nd, Sm, Gd, Tb and Dy were refined by Rietveld analysis of synchrotron X-ray powder diffraction (S-XRD) data. With increasing size of the lanthanide cation, the lattice parameters increase systematically: c by only ~1.5% whereas both a and b by ~6% from Dy{sub 2}TiO{sub 5} to La{sub 2}TiO{sub 5}. The mean Ti–O bond length only increases by ~1% with increasing radius of the Ln cation from Gd to La, primarily due to expansion of the pair of Ti–O{sub 3} bonds to opposite corners of the Ti–O{sub 5} square based pyramid polyhedra. For Dy{sub 2}TiO{sub 5} and Tb{sub 2}TiO{sub 5}, a significant variation in Ti–O{sub 1} and Ti–O{sub 4} bond lengths results in an increased deformation of the Ti–O{sub 5} base. The particular configuration consists of large rhombic shaped tunnels and smaller triangular tunnels along the b axis, which have implications for defect formation and migration caused by radiation damage or the ionic conductivity. - Graphical abstract: Figure: The crystallographic study of a systematic series of compounds with nominal stoichiometry Ln{sub 2}TiO{sub 5} (with Ln representing La, Pr, Nd, Sm, Gd, Tb and Dy) and orthorhombic, Pnma, symmetry shows changes in cell parameters which fit a linear trend. However, bond lengths are shown to deviate from trend with compounds containing the smaller, heavier lanthanides. - Highlights: • First fabrication and crystallographic refinement of compound Pr{sub 2}TiO{sub 5}. • First systematic study of the crystallography, using S-XRD, for Ln{sub 2}TiO{sub 5} series. • Cation to anion bonding trends and valence states are investigated. • The densities and band-gaps of the series are experimentally determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the La{sub 2}O{sub 3}–Nb{sub 2}O{sub 5}–WO{sub 3} ternary phase diagram: Isolation and crystal structure determination of the original La{sub 3}NbWO{sub 10} material

In the course of the exploration of the La{sub 2}O{sub 3}–WO{sub 3}–Nb{sub 2}O{sub 5} ternary phase diagram, a new compound with the formula La{sub 3}NbWO{sub 10} was discovered. Its structure was determined from a combination of powder X-ray and neutron diffraction data. It crystallizes in the tetragonal space group P4{sub 2}/nmc (no. 137) with the lattice parameters: a=10.0807(1) Å; c=12.5540(1) Å. The structure is built up from infinite ribbons of octahedra (W/Nb)O{sub 5} which are perpendicular to each other, lanthanum ions being distributed around these ribbons. The electrical properties of this compound were investigated on sintered pellets by means of complex impedance spectroscopy. - Graphical abstract: Projection along the c-axis of cationic and anionic positions of a La{sub 3}NbWO{sub 10} unit cell. - Highlights: • The structure of La{sub 3}NbWO{sub 10} was resolved from the XRD and ND data. • The structure was described in many ways. • The ionic conduction property was studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the phase stability window, phase transformation behavior, and anisotropic thermal expansion of rhombohedral bismuth oxide

Rhombohedral bismuth oxide has emerged as a promising SOFC electrolyte material, particularly at low-to-intermediate temperatures. The stability window of this phase was explored using a co-doped system, using yttrium and lanthanum or aluminum, over 7.5–25 % total dopant content and 0.907–1.154 Å weighted average dopant cationic radius. The phase transformation behavior of rhombohedral-rich phase mixtures was also investigated in situ from 360 to 656 °C to assess the effects of minor impurity phases and thermal evolution pathways. Our results reveal that low-dopant, rhombohedral-rich compositions exhibit poor structural stability upon heating. Anisotropic thermal expansion behavior was observed over 450–656 °C, serving as a sensitive indicator of sequential phase changes, including the rhombohedral β2-to-β1 transition (∼450 °C), monoclinic phase formation, and delayed or incomplete formation of the cubic phase (∼ 550 °C). These multiple unfavorable phase transitions compromise the mechanical robustness required for SOFC operation. This study underscores the need for compositional tuning to balance ionic conductivity with thermal phase stability in rhombohedral Bi 2 O 3 -based systems.

36 MATERIALS SCIENCE↗

Synthesis and characterization of a PbO{sub 2}-clay nanocomposite: Removal of lead from water using montmorillonite

Graphical abstract: The replacement of Na by Pb in the interlayer space of the smectite leads to a decrease in the intensity of the the (0 0 1) reflection as the concentration of lead nitrate increases. A significant restructuring at the particle scale is observed leading probably to the exfoliation of the caly. In addition, the thermal behaviour of the montmorillonite samples with regard to their dehydration and dehydroxilation capacities is significantly influenced. This leads to a lowering of the water content and a decrease in the ionic conductivity of the clay. Highlights: Black-Right-Pointing-Pointer In the clay, Pb replaces Na ions and a significant restructuring at the particle scale is observed. Black-Right-Pointing-Pointer Pb influenced significantly the thermal behaviour of the clay with regard to its dehydration. Black-Right-Pointing-Pointer In the interlayer space, the exchange of Na by Pb leads to a decrease in the protonic conductivity. Black-Right-Pointing-Pointer A PbO{sub 2}-clay nanocomposite material with good conductivity is synthesized. -- Abstract: The aim of this paper is to present the results obtained with Pb(II) sorption on an Algerian Clay. The experiments were carried out using a batch process. Powder X-rays diffraction patterns (PXRD) prove that in the montmorillonite Pb replaces Na ions. A significant restructuring at the particle scale is observed leading to the disappearance of the d{sub 001} reflection of the clay at high concentrations of lead. The replacement of hydrated Na with Pb ions influenced significantly the thermal behaviour of the montmorillonite samples with regard to their dehydration and dehydroxilation capacities with a lowering of the water content. A PbO{sub 2}-clay composite material with good electrical conductivity is synthesized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanodomain formation and distribution in Gd-doped ceria

Highlights: Black-Right-Pointing-Pointer Comprehensive investigation of nanodomain formation and distribution in Gd-doped ceria. Black-Right-Pointing-Pointer Direct experimental evidence of nanodomain formation at grain boundaries. Black-Right-Pointing-Pointer Nanodomain at grain boundaries would be another possible reason for grain boundary resistivity. -- Abstract: A comprehensive study, with a combination of diverse analytical techniques, was performed to investigate nanodomain formation and distribution in gadolinium-doped ceria. It is illustrated that the nanodomain formation, originating from the aggregation and segregation of dopant cations together with associated charge-compensating oxygen vacancies, is ubiquitous throughout doped ceria. The formation of nanodomains is not limited to bulk areas as previously reported but exists at grain boundaries as well. With enhanced ordering level, such nanodomains formed at grain boundaries will decrease the ionic conductivity as a result of hindered the mobility of oxygen vacancies in doped ceria. Particularly, the nanodomains formed at grain boundaries, with strong defect interactions due to enrichment of dopants and ordered oxygen vacancies, are suggested to be another possible reason for the grain-boundary resistance, other than the widely accepted space-charge layers.

36 MATERIALS SCIENCE↗

Electrochemical properties of all solid state Li/S battery

All-solid-state lithium/sulfur (Li/S) battery is prepared using siloxane cross-linked network solid electrolyte at room temperature. The solid electrolytes show high ionic conductivity and good electrochemical stability with lithium and sulfur. In the first discharge curve, all-solid-state Li/S battery shows three plateau potential regions of 2.4 V, 2.12 V and 2.00 V, respectively. The battery shows the first discharge capacity of 1044 mAh g{sup −1}-sulfur at room temperature. This first discharge capacity rapidly decreases in 4th cycle and remains at 512 mAh g{sup −1}-sulfur after 10 cycles.

36 MATERIALS SCIENCE↗

Facile preparation of apatite-type lanthanum silicate by a new water-based sol–gel process

Highlights: ► We use a Na{sub 2}SiO{sub 3} waste solution as source of Si. ► We present a simple, rapid and low temperature method of lanthanum silicate apatite preparation. ► TEOS, a high cost reagent, was successfully substituted by a cheap price Na{sub 2}SiO{sub 3}, to obtain pure La{sub 9.56}(SiO{sub 4})6O{sub 2.33} lanthanum silicate apatite. - Abstract: In recent years, apatite-type lanthanum silicates ([Ln{sub 10−x}(XO{sub 4})6O{sub 3–1.5x}] (X = Si or Ge)) have been studied for use in SOFC (solid oxide fuel cells), at low temperature (600–800 °C), due to its ionic conductivity which is higher than that of YSZ (Yttrium Stabilized Zirconia) electrolyte. For this reason they are very promising materials as solid electrolyte for SOFCs. Synthesis of functional nanoparticles is a challenge in the nanotechnology. In this work, apatite-type lanthanum silicate nanoparticles were synthesized by a water-based sol–gel process, i.e., sol–gel technique followed by chemical precipitation of lanthanum hydroxide on the gel of the silica. Na{sub 2}SiO{sub 3} waste solution was used as silica source. Spherical aerogel silica was prepared by acid catalyzed reaction, followed by precipitation of lanthanum hydroxide to obtain the precursor of apatite-type lanthanum silicate. Powders of apatite-type lanthanum silicate achieved from the precursor were characterized by thermal analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area measurements (BET). The apatite phase was formed at 900 °C.

36 MATERIALS SCIENCE↗

Rapid scalable plasma processing of thin-film Li–La–Zr–O solid-state electrolytes

Solid-state electrolytes, such as lithium lanthanum zirconium oxide (LLZO), show promise as technologies for next-generation high-energy-density batteries, but commercial development has been hindered by a lack of scalable processing methods. Current fabrication methods are costly or require long annealing steps to create dense films. We report an atmospheric pressure blown-arc nitrogen plasma jet process to rapidly form sub-micrometer-thick, dense amorphous LLZO (a-LLZO) films from sol-gel precursors. Films are processed in less than 2 min, an order of magnitude faster than what has previously been reported. We demonstrate 500-nm-thick a-LLZO films processed at 350°C with an ionic conductivity of 2 × 10 −6 S/cm at 30°C and 2 × 10 −3 S/cm at 100°C and a conductance of 19 S at 100°C, the highest conductance of any LLZO phase to date. Here, the films exhibit outstanding smooth surface morphology with low defectivity, advancing atmospheric plasma processing as a scalable processing method for solid-state electrolytes.

25 ENERGY STORAGE↗

Multiscale water dynamics in model Anion Exchange Membranes for Alkaline Membrane Fuel Cells

Ionic conductivity and water transport through alkaline Anion Exchange Membranes (AEM) are key properties for application in Alkaline Membrane Fuel Cells (AMFC), Redox-Flow-Cells, or Alkaline Membrane Electrolysis. AEMs consist of a polymer domain with cationic side groups and a pervading water domain through which anions are conducted. In this study, Quasielastic Neutron Scattering (QENS) is employed to study water rotational and diffusive dynamics in the hydroxide form of a model AEM (Fumatech FAA-3) at water contents relevant for application. Two distinct diffusion time- and length-scales are accessed: “Localized” diffusion at the lower Ångstrom/tens of picosecond scale and “extended” diffusion at the higher Ångstrom/hundreds of picosecond scale. The localized diffusion length scale is smaller than the membrane's water domain thickness and its diffusion coefficients remain close to the value of bulk water even at decreasing water content. Extended diffusion approaches the thickness of the water domain and its diffusion coefficients decrease strongly with decreasing water content. In conclusion, a master curve links water domain thickness to the extended water diffusion coefficients for the alkaline hydrocarbon model AEM and literature data on acidic per-fluorinated Proton Exchange Membranes.

59 BASIC BIOLOGICAL SCIENCES↗

Application of GO anchored mediator in a polymer electrolyte membrane for high-rate solid-state supercapacitors

Here, we synthesized a novel polymer electrolyte membrane by combining poly (vinylidene fluoride) (PVDF) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) with graphene oxide (GO) nanosheets and a lithium salt of tungstosilicic acid (Li 4 SiW 12 O 40 , hereafter, referred to SiWLi). The impact of the addition of GO/SiWLi on the microstructure and morphology of the membrane were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). We found that adding the GO/SiWLi to the PVDF/LiTFSI polymer electrolyte membrane significantly reduced the pore size. Furthermore, the addition of the GO/SiWLi resulted in not only an increase of the ionic conductivity from 0.87 $\times$ 10 –2 to 3.12 $\times$ 10 –2 Scm –1 but also an increase in the lithium-ion transference number from 0.52 to 0.87. The polymer electrolyte membranes with and without GO/SiWLi were utilized to fabricate solid-state supercapacitors. The supercapacitors fabricated with the membrane containing GO/SiWLi displayed 37.2% lower equivalent series resistance and 88.2% greater specific capacitance than those fabricated using the membrane without GO/SiWLi at 200mVs –1 .

42 ENGINEERING↗

The need for ion-exchange membranes with high charge densities

Ion-exchange membranes (IEMs) are essential for controlling ion transport in electrochemical membrane-based technologies for water purification, energy generation, and energy storage. In general, IEMs must exhibit high ionic conductivity and selectivity, both of which are significantly influenced by the charge and water content of the hydrated membrane. In this perspective, we compiled the charge and water contents of approximately 1,000 IEMs reported over the past several decades to assess their range and variability, as well as to reveal gaps and set clear targets for future membrane design. We compared the charge and water content of negatively and positively charged membranes, as well as membranes developed for desalination and energy applications. The majority of IEMs, regardless of structure or intended application, have volumetric charge densities below 3 mol/L[membrane]. This narrow range of charge densities limits the performance of IEMs and contributes to the observed tradeoff between ion throughput and selectivity. It is critical to develop IEMs with higher charge densities to overcome this performance limitation. Further, we highlighted several design strategies that yielded IEMs with fixed charge densities higher than 3 mol/L[membrane]. These strategies provide valuable insights and can guide the design of next-generation IEMs with high charge densities.

36 MATERIALS SCIENCE↗

Electrostatic limits on charge selectivity in ultrahigh charge density polymer membranes

Ion-exchange membranes (IEMs) with ultrahigh charge densities offer the promise of enhanced ion transport for electrochemical technologies, yet the fundamental limits of this membrane design strategy are not yet understood. In this work, we present a systematic study of bis(1-vinyl-3-imidazolium) cross-linked polymer membranes with fixed charge contents ranging from 6 to 9 mol/L[dry polymer], synthesized to isolate the effects of charge density at constant membrane water content. While ionic conductivity increases monotonically with increasing charge density, a sharp decline in charge selectivity is observed for the most densely charged membranes, defying conventional expectations. Structural, thermal, and mechanical analyses reveal a critical onset of network disruption and anomalous ion partitioning behavior in these densely charged membranes. With proper consideration of cross-linker geometry, these results are interpreted using Manning's counter-ion condensation theory, which suggests that closely packed charged cross-linkers amplify inter-chain electrostatic interactions and trigger excess counter-ion condensation. Our findings suggest that, beyond a threshold spacing between fixed charges, increased functionalization may harm rather than help charge selectivity of IEMs.

36 MATERIALS SCIENCE↗