Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “practical conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Wettability and CHF limits of Accident-Tolerant nuclear fuel cladding materials in light water reactor conditions

Here, we present the results of experimental investigations aimed at evaluating the thermal–hydraulic performance of chromium-coated zircaloy, i.e., one of the most promising accident tolerant fuel (ATF) cladding material for light water nuclear reactors. Precisely, we investigate the wettability and critical heat flux (CHF) limits of chromium-coated and conventional zircaloy surfaces in prototypical reactor conditions. For both surface types, we measure the contact angle in a vapor-saturated atmosphere from ambient pressure to the operating pressure of pressurized water reactors (PWRs), i.e., ~15 MPa. We measure the ambient-pressure steady-state flow boiling CHF with a spatially uniform heat flux. We measure the high-pressure steady-state flow boiling CHF with a cosine shape heat flux (up to 20 MPa) and with a uniform heat flux (up to 15 MPa), also exploring the effect of CRUD deposits on the chromium-coated surface. Our results reveal that the chromium surface and the bare zircaloy surface have similar wettability and both become super-hydrophilic in PWR conditions, and that there is practically no difference in the steady-state CHF limits, both at low-pressure and high-pressure conditions, also when the chromium-coated surface is covered by a CRUD deposit. However, while the chromium-coating does not improve the CHF compared to the bare zircaloy surface, it improves the post-CHF behavior. The chromium coating prevents the reaction between zircaloy and steam, which results in the formation of a brittle zirconium oxide through the surface of the cladding. We also measure the transient CHF under exponentially escalating heat flux inputs of a nano-smooth and a rough surface mimicking a chromium-coated zircaloy cladding. Interestingly, the results of the transient heat flux tests suggest that the CHF limit for very short periods (i.e., fast transients) is independent of the surface finish, being the same for a rough chromium surface or a nano-smooth surface.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Bayesian discovery of optimal reduced order models from mechanistic and experimental data: A case study of Pd penetration in TRISO fuels using BISON

TRistructural ISOtropic (TRISO) particles rely on a silicon carbide (SiC) layer as the primary structural material and barrier to metallic fission products (FPs) release. Accurate prediction of palladium (Pd) transport and penetration is therefore critical for qualifying TRISO fuels for advanced reactors. The empirical correlation for Pd penetration in BISON is derived from historical particle-fuel data, but cannot explain the large scatter in the experimental data that arises from varying experimental conditions. To aid fuel qualification, we previously developed a mechanistic reduced order model (ROM) using BISON that resolves these dependencies. Here, in this work we build on that mechanistic ROM and perform validation and quantify its uncertainty using Bayesian uncertainty quantification (UQ). calibration against a suite of in-pile and out-of-pile experiments spanning particle compositions, geometries, and operating conditions, and we benchmark it against the empirical correlation. Bayesian UQ identifies influential parameters, calibrates them to data, and yields predictive intervals. Results show that while the empirical correlation can be tuned to fit a single experiment type, it transfers poorly; the mechanistic ROM sustains accuracy with credible uncertainty across disparate conditions. This demonstrates a practical path—via Bayesian UQ applied to mechanistic ROMs—to leverage single-effect experiments for inferring in-reactor behavior and supporting TRISO fuel qualification.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

A scalable framework for quantifying field-level agricultural carbon outcomes

Agriculture contributes nearly a quarter of global greenhouse gas (GHG) emissions, which is motivating interest in adopting certain farming practices that have the potential to reduce GHG emissions or sequester carbon in soil. The related GHG emission (including N 2 O and CH 4 ) and changes in soil carbon stock are defined here as “agricultural carbon outcomes”. Accurate quantification of agricultural carbon outcomes is the basis for achieving emission reductions for agriculture, but existing approaches for measuring carbon outcomes (including direct measurements, emission factors, and process-based modeling) fall short of achieving the required accuracy and scalability necessary to support credible, verifiable, and cost-effective measurement and improvement of these carbon outcomes. Here we propose a foundational and scalable framework to quantify field-level carbon outcomes for farmland, which is based on the holistic carbon balance of the agroecosystem: Agroecosystem Carbon Outcomes = Environment (E) × Management (M) × Crop (C). Following a comprehensive review of the scientific challenges associated with existing approaches, as well as their tradeoffs between cost and accuracy, we propose that the most viable path for the quantification of field-level carbon outcomes in agricultural land is through an effective integration of various approaches (e.g. diverse observations, sensor/in-situ data, and modeling), defined as the “System-of-Systems” solution. Such a “System-of-Systems” solution should simultaneously comprise the following components: (1) scalable collection of ground truth data and cross-scale sensing of environment variables (E), management practices (M), and crop conditions (C) at the local field level; (2) advanced modeling with necessary processes to support the quantification of carbon outcomes; (3) systematic Model-Data Fusion (MDF), i.e. robust and efficient methods to integrate sensing data and models at each local farmland level; (4) high computation efficiency and artificial intelligence (AI) to scale to millions of individual fields with low cost; and (5) robust and multi-tier validation systems and infrastructures to ensure solution fidelity and true scalability, i.e. the ability of a solution to perform robustly with accepted accuracy on all targeted fields. In this regard, we provide here the detailed scientific rationale, current progress, and future research and development (R&D) priorities to achieve different components of the “System-of-Systems” solution, thus accomplishing the Environment×Management×Crop framework to quantify field-level agricultural carbon outcomes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A visco-plastic constitutive model for accurate densification and shape predictions in powder metallurgy hot isostatic pressing

Powder metallurgy hot isostatic pressing (PM-HIP) is an advanced manufacturing process that produces near net shape parts with high material utilization and uniform microstructures. Despite being used frequently to produce small-scale components, the application of PM-HIP to large-scale components is limited due to inadequate understanding of its complex mechanisms that cause unpredictable post-HIP shape distortions. A computational model can provide necessary information about the intermediate and final stages of the HIP process that can help understand it better and make accurate predictions. Generally, two types of computational models are employed for PM-HIP of metal powders, namely, plastic and visco-plastic models. Between these, the plastic model is preferred due to its cheaper calibration approach requiring less experimental data. However, the plastic model sometimes produces incorrect predictions when slight variations of the HIP conditions are encountered in practical situations. Therefore, this work presents a visco-plastic model that addresses these limitations of the plastic model. A novel modified calibration approach is employed for the visco-plastic model that utilizes less experimental data than existing approaches. With the new approach, the data requirement is same for both plastic and visco-plastic models. This also enables a quantitative comparison of plastic and visco-plastic models, which have been only qualitatively compared in the past. When calibrated with the same experimental data, both the models are found to produce similar results. In conclusion, the calibrated visco-plastic model is applied to several complex geometries, and the predictions are found to be in good agreement with experimental observations.

Hot isostatic pressing↗
DOE OSTI2025

Advancements in the modification of TiFe alloys for enhanced hydrogen Storage: Strategies and future Directions

Hydrogen is considered a promising clean energy source, and a potential alternative to conventional fossil fuels. TiFe alloy has been particularly interesting due to its ability to reversibly absorb and desorb hydrogen at room temperature and low pressure. The initial hydrogen absorption stage of TiFe alloy requires activation under high-temperature and high-pressure conditions, which hinders its practical application. Here, this paper primarily examines the impact of elemental substitution methods on the hydrogen storage capabilities of TiFe alloys, with a particular emphasis on elucidating the mechanisms associated with various substituent elements. Commonly utilized elements, such as Mn, V, and Zr, significantly improve the activation performance of TiFe alloys. Additionally, the incorporation of elements such as Ni, Cr, Ce, and Y contributes to the modulation of phase composition, as well as the enhancement of activation and kinetic properties. However, there exists a notable deficiency in systematic investigations concerning alternative elements, coupled with a frequent oversight of the preparation process's influence on the hydrogen storage characteristics of these alloys. Consequently, the mechanisms by which different elements affect the hydrogen storage process in TiFe alloys remain inadequately understood among current research, thereby complicating the establishment of experiment-based design guidelines for TiFe alloys. Furthermore, the plasma treatment and high-entropy alloying present new approaches for optimizing the hydrogen storage properties of TiFe alloys. This paper aims to present novel research perspectives and insights to scholars in the field by introducing methods for the modification of TiFe alloys.

Hydrogen storage↗
DOE OSTI2025

Growth and structure of alpha-Ta films for quantum circuit integration

Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. The remaining loss pathways originate in microscopic defects that manifest as two level systems (TLSs) at low temperatures. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we investigate the growth of tantalum using magnetron sputtering on sapphire, Si, and photoresist substrates. In the case of sapphire, we present procedures for the growth of fully-oriented films with α-Ta [1 1 1]//Al2O3 [0 0 0 1] and α-Ta [1 −1 0]//Al2O3 [1 0 −1 0] orientational relationships and having residual resistivity ratio (RRR) ∼ 60 for 220 nm thick films. On Si, we find a complex grain texturing with Ta [1 1 0] normal to the substrate and RRR ∼ 30. We further demonstrate airbridge fabrication using Nb to nucleate α-Ta on photoresist surfaces. For the films on sapphire, resonators show TLS-limited quality factors of 1.3 ± 0.3 × 106 at 10 mK (for a waveguide gap and conductor width of 3 and 6 μm, respectively). Structural characterization using scanning electron microscopy, x-ray diffraction, low temperature transport, secondary ion mass spectrometry, and transmission electron microscopy reveal the dependence of residual impurities and screw dislocation density on processing conditions. The results provide practical insights into the fabrication of advanced superconducting devices including qubit arrays and guide future works on crystallographically deterministic qubit fabrication.

42 ENGINEERING↗
DOE OSTI2026

A comprehensive framework to assess elemental mercury in the Department of Energy: A time series analysis

Objective: This study investigated whether seasonal categories affect airborne mercury concentrations in the U.S. Department of Energy operations. Methods: We conducted an initial assessment of the general variability of airborne elemental mercury time-weighted average (TWA) samples. Then, we performed a two-component time series analysis to determine whether long-term, cyclical temperature change patterns affect mercury concentrations. Results: Both ARIMA time series models demonstrated stationary, non-random means (χ² = 83.8, p < 0.001) and standard deviation (χ² = 55.8, p < 0.001) of mercury concentrations. Here, our results indicate that the seasonal factors did not influence mercury concentration. Conclusions: Our results demonstrate that mercury concentrations primarily emanate from operational activities, work practices, and/or transient environmental conditions rather than seasonal fluctuations.

Cannady, Ryan T. [Oak Ridge National Laboratory (O↗
DOE OSTI2026

Emerging Flexible Designs for Geospatial Multimodal Foundation Models

Foundation models are rapidly transforming Earth observation by enabling scalable pretraining across diverse unlabeled geospatial modalities. However, their architectural diversity—ranging from encoder-only to encoder-decoder and masked autoencoding paradigms—makes it challenging to assess performance trade-offs in a consistent manner. In this work, we present an apples-to-apples comparison of leading FM architectures designed for geospatial multimodal reasoning, with a particular focus on flexibility across varied spectral band configurations. We standardize pretraining using identical self-supervised learning objectives and training datasets, and evaluate all models under consistent parameterization on the GEOBench benchmark across classification and segmentation tasks. Our results offer new insights into the design trade-offs between model flexibility, modality alignment, and downstream task performance. By highlighting architectural strengths and limitations under controlled conditions, this study provides practical guidance for building next-generation geospatial foundation models capable of robust multimodal reasoning.

Ambrozio Dias, Philipe [ORNL] (ORCID:0000000194277↗
DOE OSTI2021

Performance Comparison of Circular and Spherical Error Probable Estimators

This report compares the performance of three Circular Error Probable (CEP) estimators: the Grubbs-Patnaik estimator, a new, non-iterative, radial-integration estimator, and a median estimator. It also compares the performance of two Spherical Error Probable (SEP) estimators. The performance of each estimator is assessed in terms of bias, uncertainty, robustness, and computational complexity. Robustness is evaluated with respect to outliers, variations in the underlying statistical distribution characterizing munition impact positions, and impact-position measurement errors. The performance assessments indicate the radial-integration and Grubbs-Patnaik estimators perform nearly identically providing the statistical distribution of impact-position coordinates is jointly normal with zero means. In that case, both estimators outperform the median estimator by about 2% relative to the true CEP in terms of estimator uncertainty. The bias performance of the radial-integration and median estimators is close to zero for jointly normal impacts, however, the Grubbs-Patnaik estimator can be significantly biased for jointly normal impacts with non-zero means. When the statistical distribution characterizing impact positions is known, but not jointly normal, the radial-integration estimator is superior. In this case, the median estimator also outperforms the Grubbs-Patnaik estimator but is not quite as good as the radial-integration estimator. If the statistical distribution characterizing impacts is unknown and not jointly normal, or if distribution parameters are difficult or impractical to estimate, or if test data is corrupted with outliers, then the median estimator dramatically outperforms the other estimators, especially in terms of estimation bias. Unexpectedly, measurement noise did not significantly degrade the performance of any of the estimators, except for cases with signal to noise ratios less than five. Although the Grubbs-Patnaik estimator has remained the gold standard for CEP estimation for over half a century, the performance assessments indicate the new, non-iterative, radial-integration estimator and the median estimator offer significant advantages and, in most practical real-world conditions, are superior estimators. These estimators are also useful for SEP estimation whereas the Grubbs-Patnaik estimator does not extend to three dimensions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Characterization of throughput on the AXI DMA bus for burst data transfer over Ethernet

cThe Xilinx AXI Direct Memory Access (AXI DMA) module is an efficient solution for medium-speed data transfer in Xilinx SoC FPGAs, supporting data rates greater than 1000 Gbps even in very suboptimal operating modes. It facilitates direct transfer of AXI stream data into processor memory without constant software intervention, which reduces overhead and ensures consistent data logging. By utilizing the FPGA's available memory, large circular buffers (1-5 GiB) are used to buffer data and accommodate network limitations, enabling high-rate data bursts. In this study, we measured the performance of AXI DMA under conditions simulating its lowest practical data transfer speeds. The Arbitrary Length Data Sender was used to transmit AXI stream packets at 32-bit width and 100 MHz frequency, a narrow width and slow speed. Results show that the AXI DMA can transfer up to 3192.76 Mbps with large packet sizes but experiences reduced performance for smaller packets, as low as 2.6 Mbps for 4-byte packets. For Ethernet-limited applications, packet sizes between 8,000 and 16,000 bytes provided optimal transfer speeds of 874 to 1600 Mbps. These findings suggest that the AXI DMA is not the limiting factor in systems where packet sizes exceed 8,000 bytes.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Liquid Core Detection and Strand Condition Monitoring in a Continuous Caster Using Optical Fiber

Real-time monitoring of the liquid core position during the continuous casting of steel has been demonstrated using low-cost distributed optical-fiber-based strain sensors. These sensors were installed on the containment roll support structures in the segments of a production continuous caster to detect the position of the solid–liquid interface and monitor the strand condition during the continuous casting. Distributed Fiber Bragg Grating sensors (FBGs) were used in this work to monitor strain at six roll positions in the caster. The sensor performance was first validated by comparing optical strain measurements with conventional strain gauge measurements in the lab. Next, optical strain measurements were performed on an isolated caster segment in a segment maintenance facility using hydraulic jacks to simulate the presence of a liquid core under the roll. Finally, the sensors were evaluated during caster operation. The sensors successfully detected the load increase associated with the presence of a liquid core under each instrumented roll location. Incidents of bulging and roll eccentricity were also detected using frequency analysis of the optical strain signal. The liquid core position measurements were compared using predictions from computer models (digital twins) in use at the production site. The measurements were in good agreement with the model predictions, with a few exceptions. Under certain transient caster operating conditions, such as spraying practice changes and SEN exchanges, the model predictions deviated slightly from the liquid core position determined from strain measurements.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

From Neglect to Progress: Assessing Social Sustainability and Decent Work in the Tourism Sector

Measuring social sustainability performance involves assessing firms’ implementation of social goals, including working conditions, health and safety, employee relationships, diversity, human rights, community engagement, and philanthropy. The concept of social sustainability is closely linked to the notion of decent work, which emphasizes productive work opportunities with fair income, secure workplaces, personal development prospects, freedom of expression and association, and equal treatment for both genders. However, the tourism sector, known for its significant share of informal labor-intensive work, faces challenges that hinder the achievement of decent work, such as extended working hours, low wages, limited social protection, and gender discrimination. This study assesses the social sustainability of the Portuguese tourism industry. The study collected data from the “Quadros do Pessoal” statistical tables for the years 2010 to 2020 to analyze the performance of Portuguese firms in the tourism sector and compare them with one another and with the overall national performance. The study focused on indicators such as employment, wages, and work accidents. The findings reveal fluctuations in employment and remuneration within the tourism sector and high growth rates in the tourism sector compared to the national average. A persistent gender pay gap is identified, which emphasizes the need to address this issue within the tourism industry. Despite some limitations, such as the lack of comparable data on work quality globally, incomplete coverage of sustainability issues, and challenges in defining and measuring social sustainability indicators, the findings have implications for policy interventions to enhance social sustainability in the tourism industry. By prioritizing decent work, safe working conditions, and equitable pay practices, stakeholders can promote social sustainability, stakeholder relationships, and sustainable competitive advantage. Policymakers are urged to support these principles to ensure the long-term sustainability of the tourism industry and foster a more inclusive and equitable society. This study provides insights for Tourism Management, sustainable Human Resource Management, Development Studies, and organizational research, guiding industry stakeholders in promoting corporate social sustainability, firm survival, and economic growth.

Santos, Eleonora (ORCID:0000000346930804)↗
DOE OSTI2021

Design and analysis of a wake model for spatially heterogeneous flow

Abstract. Methods of turbine wake modeling are being developed to more accurately account for spatially variant atmospheric conditions within wind farms. Most current wake modeling utilities are designed to apply a uniform flow field to the entire domain of a wind farm. When this method is used, the accuracy of power prediction and wind farm controls can be compromised depending on the flow-field characteristics of a particular area. In an effort to improve strategies of wind farm wake modeling and power prediction, FLOw Redirection and Induction in Steady State (FLORIS) was developed to implement sophisticated methods of atmospheric characterization and power output calculation. In this paper, we describe an adapted FLORIS model that features spatial heterogeneity in flow-field characterization. This model approximates an observed flow field by interpolating from a set of atmospheric measurements that represent local weather conditions. The objective of this method is to capture heterogeneous atmospheric effects caused by site-specific terrain features, without explicitly modeling the geometry of the wind farm terrain. The implemented adaptations were validated by comparing the simulated power predictions generated from FLORIS to the actual recorded wind farm output from the supervisory control and data acquisition (SCADA) recordings and large eddy simulations (LESs). When comparing the performance of the proposed heterogeneous model to homogeneous FLORIS simulations, the results show a 14.6 % decrease for mean absolute error (MAE) in wind farm power output predictions for cases using wind farm SCADA data and a 18.9 % decrease in LES case studies. The results of these studies also indicate that the efficacy of the proposed modeling techniques may vary with differing site-specific operational conditions. This work quantifies the accuracy of wind plant power predictions under heterogeneous flow conditions and establishes best practices for atmospheric surveying for wake modeling.

17 WIND ENERGY↗
DOE OSTI2021

Method for optimization of huff-n-puff gas injections in hydrocarbon reservoirs

Methods for optimization of liquid oil production by huff-n-puff in shale reservoirs to achieve an improved (and optimal) oil recovery factor. The process determines and utilizes the optimum huff and puff times, number of cycles and soaking time under practical operation and reservoir conditions. The huff time in the process is a period so long that the pressure near the wellbore reaches the set maximum injection pressure during the huff period. The puff time in the process is the time required for the pressure near the wellbore to reach the set minimum production pressure during the puff period. Soaking is typically not necessary during the huff-n-puff gas injection in shale oil reservoirs. The number of huff-n-puff cycles is determinable by the time in which the economic rate cut-off is reached.

Sheng, James J.↗
DOE OSTI2023

Method for optimization of huff-n-puff gas injection in hydrocarbon reservoirs

Methods for optimization of liquid oil production by huff-n-puff in shale reservoirs to achieve an improved (and optimal) oil recovery factor. The process determines and utilizes the optimum huff and puff times, number of cycles and soaking time under practical operation and reservoir conditions. The huff time in the process is a period so long that the pressure near the wellbore reaches the set maximum injection pressure during the huff period. The puff time in the process is the time required for the pressure near the wellbore to reach the set minimum production pressure during the puff period. Soaking is typically not necessary during the huff-n-puff gas injection in shale oil reservoirs. The number of huff-n-puff cycles is determinable by the time in which the economic rate cut-off is reached.

Sheng, James J.↗
DOE OSTI2023

Degeneracy Removal of Spin Bands in Collinear Antiferromagnets with Non–Interconvertible Spin–Structure Motif Pair

Energy bands in antiferromagnets are supposed to be spin degenerate in the absence of spin–orbit coupling (SOC). Recent studies have identified formal symmetry conditions for antiferromagnetic crystals in which this degeneracy can be lifted, spin splitting, even in the vanishing SOC (i.e., non-relativistic) limit. Materials having such symmetries could enable spin-split antiferromagnetic spintronics without the burden of using heavy-atom compounds. However, the symmetry conditions that involve spin and magnetic symmetry are not always effective as practical material selection filters. Furthermore, these symmetry conditions do not readily disclose trends in the magnitude and momentum dependence of the spin-splitting energy. Here, it is shown that the formal symmetry conditions enabling spin-split antiferromagnets can be interpreted in terms of local motif pairs, such as octahedra or tetrahedra, each carrying opposite magnetic moments. Here, collinear antiferromagnets with such a spin-structure motif pair, whose components interconvert by neither translation nor spatial inversion, will show spin splitting. Such a real-space motif-based approach enables an easy way to identify and design materials (illustrated in real example materials) having spin splitting without the need for SOC, and offers insights into the momentum dependence and magnitude of the spin splitting.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Integrated Issues and Risk Management: A Theoretical Framework Overview

The contractor requirements document for DOE O 226.1B, Implementation of Department of Energy Oversight Policy, requires DOE/NNSA contractors to establish an assurance system that includes, among other things, “Rigorous, risk-informed, and credible self-assessment and feedback and improvement activities. Assessment programs must be risk-informed, formally described and documented, and appropriately cover potentially high consequence activities” and “Contains an issues management process that is capable of categorizing the significance of findings based on risk and priority and other appropriate factors….” However, the term “risk-informed” is not defined in this or any other DOE order, and no formal guidance on how to integrate the two concepts currently exists. The Risk Management Guide for Defense Programs released by NA-18, Office of Systems Engineering and Integration (SE&I), states it is “a framework and general guidance to program office personnel on the effective management of program risks and issues”, however it then defines issues as “events with 100% likelihood of affecting program objectives” and states “unless specified otherwise, the term “risk” will also serve to represent issues for the remainder of this plan,” severally limiting its ability to provide adequate guidance on this topic. Outside of DOE scope, the U.S. Nuclear Regulatory Commission (U.S. NRC) imposes similar requirements. ASME NQA-1-2015 Requirement 16 states “Conditions adverse to quality shall be identified promptly and corrected as soon as practicable. In the case of a significant condition adverse to quality, the cause of the condition shall be determined, and corrective action taken to preclude recurrence. The identification, cause, and corrective action for significant conditions adverse to quality shall be documented and reported to appropriate levels of management. Completion of corrective actions shall be verified”. The purpose of this document is to provide a best-in-class framework for an integrated risk and issues management process. This process would provide a robust feedback loop between risk management and issues management to: Enhance risk identification and characterization, use risk handling principles to improve corrective action planning, and ensure regulatory compliance.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗