Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compaction banding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High-energy emission from a magnetar giant flare in the Sculptor galaxy

Magnetars are the most highly magnetized neutron stars in the cosmos (with magnetic field 10 13 –10 15 G). Giant flares from magnetars are rare, short-duration (about 0.1 s) bursts of hard X-rays and soft γ rays. Owing to the limited sensitivity and energy coverage of previous telescopes, no magnetar giant flare has been detected at gigaelectronvolt (GeV) energies. Here, we report the discovery of GeV emission from a magnetar giant flare on 15 April 2020 (refs. 3,4 and A. J. Castro-Tirado et al., manuscript in preparation). The Large Area Telescope (LAT) on board the Fermi Gamma-ray Space Telescope detected GeV γ rays from 19 s until 284 s after the initial detection of a signal in the megaelectronvolt (MeV) band. Our analysis shows that these γ rays are spatially associated with the nearby (3.5 megaparsecs) Sculptor galaxy and are unlikely to originate from a cosmological γ-ray burst. Thus, we infer that the γ rays originated with the magnetar giant flare in Sculptor. Furthermore, we suggest that the GeV signal is generated by an ultra-relativistic outflow that first radiates the prompt MeV-band photons, and then deposits its energy far from the stellar magnetosphere. After a propagation delay, the outflow interacts with environmental gas and produces shock waves that accelerate electrons to very high energies; these electrons then emit GeV γ rays as optically thin synchrotron radiation. This observation implies that a relativistic outflow is associated with the magnetar giant flare, and suggests the possibility that magnetars can power some short γ-ray bursts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Ultrahigh supercurrent density in a two-dimensional topological material

Ongoing advances in superconductors continue to revolutionize technology thanks to the increasingly versatile and robust availability of lossless supercurrents. In particular, high supercurrent density can lead to more efficient and compact power transmission lines, high-field magnets, as well as high-performance nanoscale radiation detectors and superconducting spintronics. In this work, we report the discovery of an unprecedentedly high superconducting critical current density (17 MA / cm 2 at 0 T and 7 MA / cm 2 at 8 T) in 1T'–WS 2 , exceeding those of all reported two-dimensional superconductors to date. 1T'–WS 2 features a strongly anisotropic (both in- and out-of-plane) superconducting state that violates the Pauli paramagnetic limit signaling the presence of unconventional superconductivity. Spectroscopic imaging of the vortices further substantiates the anisotropic nature of the superconducting state. More intriguingly, the normal state of 1T'–WS 2 carries topological properties. The band structure obtained via angle-resolved photoemission spectroscopy and first-principles calculations points to a Z 2 topological invariant. The concomitance of topology and superconductivity in 1T'–WS 2 establishes it as a topological superconductor candidate, which is promising for the development of quantum computing technology.

36 MATERIALS SCIENCE↗
DOE OSTI2025

SULI Intern Final Report: Computationally Investigating Hydrogen Thermo-Diffusion in Yttrium Hydride Using Multiscale Methods

The renaissance of nuclear energy has arrived, heralding an age of abundant inexpensive clean energy, and renewed space exploration. In nuclear-powered spacecraft and microreactors, safety and size are of utmost importance. Yttrium Hydride (YHx) is being researched for its utility as a neutron moderator in nuclear reactors; the hydrogen in YHx slows down neutrons, enabling a continuous nuclear reaction in the reactor. This has the benefit of allowing reactors to be more safe, compact, and efficient. The goal of this effort is to computationally predict the coefficient of temperature-dependent hydrogen diffusion within YHx, the Soret coefficient. This parameter is essential for determining the safe operating modes of YHx moderators. Zirconium Hydride (ZrHx) is used in the Training, Research, Isotopes, General Atomics (TRIGA) reactor, is the reference material for these calculations. In this work, nanoscale atomic modeling in the Vienna Ab initio Simulation Package (VASP) is combined with the mesoscale finite element phase-field module in the Multiphysics Object-Oriented Simulation Environment (MOOSE); this culminates in a new multiscale computational method to simulate Soret diffusion of hydrogen in YHx. This data is useful for predicting experimental outcomes. This workflow involves convergence testing followed by static, Nudged Elastic Band (NEB), Quasi-Harmonic Approximation (QHA), and Molecular Dynamics (MD) calculations - linked with phase field simulation. NEB simulates hydrogen migration, while QHA and MD predict temperature-dependent properties. The static calculations align with literature, and preliminary NEB and QHA calculations yield accurate results. Once the atomic calculations are complete, we will incorporate Electron Backscatter Diffraction (EBSD) images and VASP-generated parameters into the phase field module to simulate intra- and intergranular transport of hydrogen in ZrHx and YHx. Future research will extend our approach to fuel-moderator materials systems such as Uranium-Yttrium Hydride (U-YHx). This work contributes to the development of advanced nuclear energy solutions for space travel.

36 - MATERIALS SCIENCE↗
DOE OSTI2023

Mitigating the allergenicity of peanut allergen Ara h 1 by cold atmospheric pressure argon plasma jet

Abstract BACKGROUND Peanut allergy is recognized as a major food allergy that triggers severe and even fatal symptoms. Avoidance of peanuts in the diet is the main option for current safety management. Processing techniques reducing peanut allergenicity are required to develop other options. Cold plasma is currently considered as a novel non‐thermal approach to alter protein structure and has the potential to alleviate immunoreactivity of protein allergen. RESULTS The application of a cold argon plasma jet to peanut protein extract could reduce the amount of a 64 kDa protein band corresponding to a major peanut allergen Ara h 1 using sodium dodecyl sulfate–polyacrylamide gel electrophoresis, but the overall protein size distribution did not change significantly. A decrease in peanut protein solubility was a possible cause that led to the loss of protein content in the soluble fraction. Immunoblotting and enzyme‐linked immunosorbent assay elucidated that the immunoreactivity of Ara h 1 was significantly decreased with the time treated with plasma. Ara h 1 antigenicity reduced by 38% after five scans (approximately 3 min) of cold argon plasma jet treatment, and the reduction was up to 66% after approximately 15 min of treatment. CONCLUSION The results indicate that cold argon plasma jet treatment could be a suitable platform for alleviating the immunoreactivity of peanut protein. This work demonstrates an efficient, compact, and rapid platform for mitigating the allergenicity of peanuts, and shows great potential for the plasma platform as a non‐thermal technique in the food industry. © 2023 Society of Chemical Industry.

Hsu, Fu‐Chiun↗
DOE OSTI2024

The XRISM/Resolve View of the Fe K Region of Cyg X-3

The X-ray binary system Cygnus X-3 (4U 2030+40, V1521 Cyg) is luminous but enigmatic owing to the high intervening absorption. High-resolution X-ray spectroscopy uniquely probes the dynamics of the photoionized gas in the system. In this Letter, we report on an observation of Cyg X-3 with the XRISM/Resolve spectrometer, which provides unprecedented spectral resolution and sensitivity in the 2–10 keV band. We detect multiple kinematic and ionization components in absorption and emission whose superposition leads to complex line profiles, including strong P Cygni profiles on resonance lines. The prominent Fe xxv Heα and Fe xxvi Lyα emission complexes are clearly resolved into their characteristic fine-structure transitions. Self-consistent photoionization modeling allows us to disentangle the absorption and emission components and measure the Doppler velocity of these components as a function of binary orbital phase. We find a significantly higher velocity amplitude for the emission lines than for the absorption lines. The absorption lines generally appear blueshifted by ∼−500–600 km s −1 . We show that the wind decomposes naturally into a relatively smooth and large-scale component, perhaps associated with the background wind itself, plus a turbulent, denser structure located close to the compact object in its orbit.

Audard, Marc (ORCID:000000034721034X)↗
DOE OSTI2022

SPT-3G+: mapping the high-frequency cosmic microwave background using kinetic inductance detectors

We present the design and science goals of SPT-3G+, a new camera for the South Pole Telescope, which will consist of a dense array of 34100 kinetic inductance detectors measuring the cosmic microwave background (CMB) at 220, 285 and 345 GHz. The SPT-3G+ dataset will enable new constraints on the process of reionization, including measurements of the patchy kinematic Sunyaev-Zeldovich effect and improved constraints on the optical depth due to reionization. At the same time, it will serve as a pathfinder for the detection of Rayleigh scattering, which could allow future CMB surveys to constrain cosmological parameters better than from the primary CMB alone. In addition, the combined, multi-band SPT-3G and SPT-3G+ survey data, will have several synergies that enhance the original SPT-3G survey, including: extending the redshift-reach of SZ cluster surveys to z > 2; understanding the relationship between magnetic fields and star formation in our Galaxy; improved characterization of the impact of dust on inflationary B-mode searches; and characterizing astrophysical transients at the boundary between mm and sub-mm wavelengths. Finally, the modular design of the SPT-3G+ camera allows it to serve as an on-sky demonstrator for new detector technologies employing microwave readout, such as the on-chip spectrometers that we expect to deploy during the SPT-3G+ survey. In this paper, we describe the science goals of the project and the key technology developments that enable its powerful yet compact design.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Silicon-Lattice-Matched Boron-Doped Gallium Phosphide: A Scalable Acousto-Optic Platform

The compact size, scalability, and strongly confined fields in integrated photonic devices enable new functionalities in photonic networking and information processing, both classical and quantum. Gallium phosphide (GaP) is a promising material for active integrated photonics due to its high refractive index, wide bandgap, strong nonlinear properties, and large acousto-optic figure of merit. Here, this study demonstrates that silicon-lattice-matched boron-doped GaP (BGaP), grown at the 12-inch wafer scale, provides similar functionalities as GaP. BGaP optical resonators exhibit intrinsic quality factors exceeding 25,000 and 200,000 at visible and telecom wavelengths, respectively. It further demonstrates the electromechanical generation of low-loss acoustic waves and an integrated acousto-optic (AO) modulator. High-resolution spatial and compositional mapping, combined with ab initio calculations, indicate two candidates for the excess optical loss in the visible band: the silicon-GaP interface and boron dimers. These results demonstrate the promise of the BGaP material platform for the development of scalable AO technologies at telecom and provide potential pathways toward higher performance at shorter wavelengths.

36 MATERIALS SCIENCE↗
DOE OSTI2021

SN 2020bqj: A Type Ibn supernova with a long-lasting peak plateau

We report type Ibn supernovae (SNe Ibn) are a rare class of stripped envelope supernovae interacting with a helium-rich circumstellar medium (CSM). The majority of the SNe Ibn reported in the literature display a surprising homogeneity in their fast-evolving lightcurves and are typically found in actively starforming spiral galaxies. We present the discovery and the study of SN 2020bqj (ZTF20aalrqbu), a SN Ibn with a long-duration peak plateau lasting 40 days and hosted by a faint low-mass galaxy. We aim to explain its peculiar properties using an extensive photometric and spectroscopic data set. We compare the photometric and spectral evolution of SN 2020bqj with regular SNe Ibn from the literature, as well as with other outliers in the SN Ibn subclass. We fit the bolometric and multi-band lightcurves with powering mechanism models such as radioactive decay and CSM interaction. We also model the host galaxy of SN 2020bqj. The risetime, peak magnitude and spectral features of SN 2020bqj are consistent with those of most SNe Ibn, but the SN is a clear outlier in the subclass based on its bright, long-lasting peak plateau and the low mass of its faint host galaxy. We show through modeling that the lightcurve of SN 2020bqj can be powered predominantly by shock heating from the interaction of the SN ejecta and a dense CSM, combined with radioactive decay. The peculiar Type Ibn SN 2011hw is a close analog to SN 2020bqj in terms of lightcurve and spectral evolution, suggesting a similar progenitor and CSM scenario. In this scenario a very massive progenitor star in the transitional phase between a luminous blue variable and a compact Wolf-Rayet star undergoes core-collapse, embedded in a dense helium-rich CSM with an elevated opacity compared to normal SNe Ibn, due to the presence of residual hydrogen. This scenario is consistent with the observed properties of SN 2020bqj and the modeling results. SN 2020bqj is a compelling example of a transitional SN Ibn/IIn based on not only its spectral features, but also its lightcurve, host galaxy properties and the inferred progenitor properties. The strong similarity with SN 2011hw suggests this subclass may be the result of a progenitor in a stellar evolution phase that is distinct from those of progenitors of regular SNe Ibn.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Searching for dark clumps with gravitational-wave detectors

Dark compact objects (“clumps”) transiting the Solar System exert accelerations on the test masses (TM) in a gravitational-wave (GW) detector. We reexamine the detectability of these clump transits in a variety of current and future GW detectors, operating over a broad range of frequencies. TM accelerations induced by clump transits through the inner Solar System have frequency content around f ~ μ Hz . Some of us [Fedderke et al., Phys. Rev. D 105, 103018 (2022)] recently proposed a GW detection concept with μ Hz sensitivity, based on asteroid-to-asteroid ranging. From the detailed sensitivity projection for this concept, we find both analytically and in simulation that purely gravitational clump–matter interactions would yield one detectable transit every ~ 20 yrs , if clumps with mass m cl ~ 10 14 kg saturate the dark-matter (DM) density. Other (proposed) GW detectors using local TMs and operating in higher frequency bands are sensitive to smaller clump masses and have smaller rates of discoverable signals. We also consider the case of clumps endowed with an additional attractive long-range clump–matter fifth force significantly stronger than gravity (but evading known fifth-force constraints). For the μ Hz detector concept, we use simulations to show that, for example, a clump–matter fifth-force ~ 10 3 times stronger than gravity with a range of ~ AU would boost the rate of detectable transits to a few per year for clumps in the mass range 10 11 kg ≲ m cl ≲ 10 14 kg , even if they are a ~ 1 % subcomponent of the DM. The ability of μ Hz GW detectors to probe asteroid-mass-scale dark objects that may otherwise be undetectable bolsters the science case for their development.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Hygrothermal aging effects on polyimide and acrylate-based adhesive materials in high-performance flat-flex cable assemblies

Flat-flex assemblies are widely used across a diverse range of technologies, including consumer electronics, automotive systems, aerospace and defense applications, and medical devices, due to their compact form factor and flexibility. However, environmental stressors like temperature and humidity are known to degrade performance over time, though the main mechanisms for degradation remain unknown. Here, in this work, we examined the aging behavior of copper/polyimide/adhesive laminate systems under varying temperature and humidity conditions, focusing on material degradation and its effects on mechanical and dielectric properties. Results show that peel strength and breakdown voltage decrease with exposure time, temperature, and humidity; spectroscopic characterization revealed that the adhesive, and not the polyimide, is the weak link in the material stack-up. The adhesive, identified as a butyl acrylate-acrylonitrile (BA-AN) copolymer, exhibited age-related spectral changes that correlated with exposure severity and duration. Hydrolysis at BA ester and AN nitrile groups was identified as the primary degradation mechanism, producing amides, acids, and alcohols. We developed a mechanistic model that connects kinetic parameters for BA-AN spectral band decay to peel strength and breakdown voltage, and implicates hydrolysis at the AN moiety, not BA, in performance decrements. Modeling predictions at ambient conditions indicate faster decline in peel strength than dielectric strength at early times, followed by plateauing of both properties at longer times. These findings provide critical insights into laminate aging mechanisms and highlight the importance of addressing BA-AN degradation to improve the long-term reliability of these systems in high-humidity environments.

organic↗
DOE OSTI2026

Octave-spanning terahertz quarter-wave plates based on over-coupled Fabry–Pérot resonances in reflective metal–dielectric–metal metasurfaces

Compact devices for broadband polarization control in the terahertz (THz) regime remain challenging to realize due to the intrinsic phase dispersion associated with birefringent materials and resonant structures. Here, we demonstrate achromatic THz quarter-wave plates with near-unity efficiency and operating under a wide range of incidence angles, based on over-coupled metal–dielectric–metal reflective metasurfaces. The devices operate as single-port anisotropic Fabry–Pérot cavities, in which the phase dispersion of the over-coupled resonances is engineered to maintain an approximately constant relative phase delay between orthogonal field components over a broad frequency range. Four complementary metasurface designs operating at an incidence angle of 45° collectively cover the 0.25–3 THz frequency range accessible to a typical THz time-domain spectroscopy system. Each device exhibits an approximately octave-wide operational bandwidth, with axial ratios below 3 dB and polarization-conversion efficiencies exceeding 80% across most of the operating band. Systematic structural optimization suppresses coupling to diffraction and guided-wave modes, thereby further extending the usable bandwidth while preserving the required phase relationship between orthogonal polarizations. The demonstrated metasurfaces are compatible with wafer-scale fabrication processes, and experimental results show excellent agreement with simulations. These findings establish over-coupled reflective metasurfaces as a robust, scalable, and versatile platform for broadband THz polarization control.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unravelling the origin of extended radio emission in narrow-line Seyfert 1 galaxies with the JVLA

Narrow-line Seyfert 1 galaxies (NLS1s) are believed to be active galactic nuclei (AGN) in the early stages of their evolution. Several dozen of them have been found to host relativistic jets, whilst the majority of NLS1s have not even been detected in radio, emphasising the heterogeneity of the class in this band. In this paper, our aim is to determine the predominant source of radio emission in a sample of 44 NLS1s, selected based on their extended kiloparsec-scale radio morphologies at 5.2 GHz. Here, we accomplish this by analysing their spatially resolved radio spectral index maps, centred at 5.2 GHz, as the spectral index carries information about the production mechanisms of the emission. In addition, we utilise several diagnostics based on mid-infrared emission to estimate the star formation activity of their host galaxies. These data are complemented by archival data to draw a more complete picture of each source. We find an extraordinary diversity among our sample. Approximately equal fractions (~10–12 sources) of our sources can be identified as AGN-dominated, composite, and host-dominated. Among the AGN-dominated sources are a few NLS1s with very extended jets, reaching distances of tens of kiloparsecs from the nucleus. One of these, J0814+5609, hosts the most extended jets found in an NLS1 so far. We also identify five NLS1s that could be classified as compact steep-spectrum sources. In addition, one source shows a possible kiloparsec-scale relic that reaches well outside the host galaxy as well as restarted nuclear activity, and one could belong to the sub-class of NLS1s that host relativistic jets that seem to be absorbed at lower radio frequencies (< 10 GHz). We further conclude that, due to the variety seen in NLS1s, simple proxies, such as the star formation diagnostics also employed in this paper and the radio loudness parameter, are not ideal tools for characterising NLS1s. We emphasise the necessity of examining NLS1s as individuals instead of making assumptions based on their classification. When these issues are properly taken into account, NLS1s offer an exceptional environment for studying the interplay between the host galaxy and several AGN-related phenomena, such as jets and outflows.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Spectral, Compositional, and Physical Properties of the Upper Murray Formation and Vera Rubin Ridge, Gale Crater, Mars

During 2018 and 2019, the Mars Science Laboratory Curiosity rover investigated the chemistry, morphology, and stratigraphy of Vera Rubin ridge (VRR). Using orbital data from the Compact Reconnaissance Imaging Spectrometer for Mars, scientists attributed the strong 860 nm signal associated with VRR to the presence of red crystalline hematite. However, Mastcam multispectral data and CheMin X-ray diffraction (XRD) measurements show that the depth of the 860 nm absorption is negatively correlated with the abundance of red crystalline hematite, suggesting that other mineralogical or physical parameters are also controlling the 860 nm absorption. Here, we examine Mastcam and ChemCam passive reflectance spectra from VRR and other locations to link the depth, position, and presence or absence of iron-related mineralogic absorption features to the XRD-derived rock mineralogy. Correlating CheMin mineralogy to spectral parameters showed that the ~860 nm absorption has a strong positive correlation with the abundance of ferric phyllosilicates. New laboratory reflectance measurements of powdered mineral mixtures can reproduce trends found in Gale crater. We hypothesize that variations in the 860 nm absorption feature in Mastcam and ChemCam observations of VRR materials are a result of three factors: (1) variations in ferric phyllosilicate abundance due to its ~800–1,000 nm absorption; (2) variations in clinopyroxene abundance because of its band maximum at ~860 nm; and (3) the presence of red crystalline hematite because of its absorption centered at 860 nm. We also show that relatively small changes in Ca-sulfate abundance is one potential cause of the erosional resistance and geomorphic expression of VRR.

58 GEOSCIENCES↗
DOE OSTI2022

The MeerKAT Galaxy Cluster Legacy Survey I. Survey Overview and Highlights

MeerKAT’s large number (64) of 13.5 m diameter antennas, spanning 8 km with a densely packed 1 km core, create a powerful instrument for wide-area surveys, with high sensitivity over a wide range of angular scales. The MeerKAT Galaxy Cluster Legacy Survey (MGCLS) is a programme of long-track MeerKAT L-band (900–1670 MHz) observations of 115 galaxy clusters, observed for ~6–10 h each in full polarisation. The first legacy product data release (DR1), made available with this paper, includes the MeerKAT visibilities, basic image cubes at ~8" resolution, and enhanced spectral and polarisation image cubes at ~8" and 15" resolutions. Typical sensitivities for the full-resolution MGCLS image products range from ~3–5 μJy beam –1 . The basic cubes are full-field and span 2° × 2°. The enhanced products consist of the inner 1.2° × 1.2° field of view, corrected for the primary beam. The survey is fully sensitive to structures up to ~10' scales, and the wide bandwidth allows spectral and Faraday rotation mapping. Relatively narrow frequency channels (209 kHz) are also used to provide H I mapping in windows of 0 < z < 0.09 and 0.19 < z < 0.48. Here, in this paper, we provide an overview of the survey and the DR1 products, including caveats for usage. We present some initial results from the survey, both for their intrinsic scientific value and to highlight the capabilities for further exploration with these data. These include a primary-beam-corrected compact source catalogue of ~626 000 sources for the full survey and an optical and infrared cross-matched catalogue for compact sources in the primary-beam-corrected areas of Abell 209 and Abell S295. We examine dust unbiased star-formation rates as a function of cluster-centric radius in Abell 209, extending out to 3.5 R 200 . We find no dependence of the star-formation rate on distance from the cluster centre, and we observe a small excess of the radio-to-100 μm flux ratio towards the centre of Abell 209 that may reflect a ram pressure enhancement in the denser environment. We detect diffuse cluster radio emission in 62 of the surveyed systems and present a catalogue of the 99 diffuse cluster emission structures, of which 56 are new. These include mini-halos, halos, relics, and other diffuse structures for which no suitable characterisation currently exists. We highlight some of the radio galaxies that challenge current paradigms, such as trident-shaped structures, jets that remain well collimated far beyond their bending radius, and filamentary features linked to radio galaxies that likely illuminate magnetic flux tubes in the intracluster medium. We also present early results from the H I analysis of four clusters, which show a wide variety of H I mass distributions that reflect both sensitivity and intrinsic cluster effects, and the serendipitous discovery of a group in the foreground of Abell 3365.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Observing the onset of the accretion wake in Vela X-1

High-mass X-ray binaries (HMXBs) offer a unique opportunity to investigate accretion onto compact objects and the wind structure in massive stars. A key source for such studies is the bright neutron star HMXB Vela X-1 whose convenient physical and orbital parameters facilitate analyses and in particular enable studies of the wind structure in HMXBs. Here, we analyse simultaneous XMM-Newton and NuSTAR observations at $\phi_{orb}$ ≈ 0.36–0.52 and perform time-resolved spectral analysis down to the pulse period of the neutron star based on our previous NuSTAR-only results. For the first time, we are able to trace the onset of the wakes in a broad 0.5–78 keV range with a high-time resolution of ~283 s and compare our results with theoretical predictions. Here we observed a clear rise in the absorption column density of the stellar wind N H,1 starting at orbital phase ~0.44, corresponding to the wake structure entering our line of sight towards the neutron star, together with local extrema throughout the observation, which are possibly associated with clumps or other structures in the wind. Periods of high absorption reveal the presence of multiple fluorescent emission lines of highly ionised species, mainly in the soft-X-ray band between 0.5 and 4 keV, indicating photoionisation of the wind.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

The ‘Giraffe’: discovery of a stripped red giant in an interacting binary with an ∼2 M ⊙ lower giant

We report the discovery of a stripped giant + lower giant Algol-type binary, 2M04123153+6738486 (2M0412), identified during a search for non-interacting compact object – star binaries. 2M0412 is an evolved ( T eff, giant ≃ 4000 K), luminous ( L giant ≃ 150 L ⊙ ) red giant in a circular P = 81.2 d binary. 2M0412 is a known variable star previously classified as a semiregular variable. The cross-correlation functions of follow-up Keck/HIRES and LBT/Potsdam Echelle Polarimetric and Spectroscopic Instrument (PEPSI) spectra show an radial velocity variable second component with implied mass ratio q = M giant / M comp ≃ 0.20 ± 0.01. The All-Sky Automated Survey for SuperNovae (ASAS-SN), Asteroid Terrestrial-impact Last Alert System (ATLAS), Transiting Exoplanet Survey Telescope ( TESS ), and Zwicky Transient Facility (ZTF) light curves show that the giant is a Roche lobe filling ellipsoidal variable with an inclination of 49.4 ± 0.3°, and a giant mass of M giant = 0.38 ± 0.01 M ⊙ for a distance of ≃ 3.7 kpc. The mass of the giant indicates that its envelope has been partially stripped. The giant companion on the lower red giant branch has a mass of M comp = 1.91 ± 0.03 M ⊙ with T eff, comp ≃ 5000 K, L comp ≃ 60 L ⊙ , and R comp ≃ 11 R ⊙ . The lower giant contributes ${\sim }35{{\ \rm per\ cent}}$ of the flux in the V band. We also identify an orbital phase dependent, broad $\rm H\,\alpha$ emission line which could indicate ongoing accretion from the stripped red giant on to the companion.

(stars:) binaries: spectroscopic↗
DOE OSTI2024

Electron Density Measurements Using USPR (Final Scientific/Technical Report)

UC Davis has fabricated an ultrashort pulse reflectometer (USPR) diagnostic instrument for electron density profile measurements on compact, short duration, magnetically-confined fusion-energy concept devices such as spheromaks and FRCs. The USPR system transmits extremely short duration (~few nsec) chirped waveforms that together span 29 to 75 GHz. These chirped waveforms illuminate and reflect from the target plasma, with each frequency component reflecting from a different density layer (higher frequencies probe deeper into the plasma before reflecting). The reflected waveforms are split into roughly 42 different frequencies; time-of-flight (TOF) measurements made at each frequency with high resolution (~25 psec measurement resolution which corresponds to ~5 mm). These TOF data may then be inverted via software to generate electron density profiles with high time resolution (~10 μsec). At the heart of the system is a field programmable gate array (FPGA) based controller which collects and processes all of the USPR data in addition to generating all of the control signals required for maximum flexibility. The FPGA controller has the software flexibility to be easily reconfigured for different plasma devices, and the entire system sufficiently compact to be easily and quickly transported between devices. A high speed impulse generator was transformed into a set of three ultrashort pulse transmitter chirps using a combination of dispersive waveguide, frequency doublers and high-pass filters. A mm-wave controller was fabricated to sequentially switch between the three chirps, directing the chirps one-by-one to three different mm-wave assemblies spanning 29-75 GHz. Each mm-wave assembly consists of a high power active multiplier chain which converts the transmitter chirp to higher frequencies, and a broadband mixer which downconverts the reflected waveform to the 2-18 GHz range of the UPSR receiver. The 16-channel receiver (shared by all 3 mm-wave assemblies) was fabricated employing custom TOF modules capable of operating at a high 1 MHz sampling rate. Laboratory testing of the full system revealed the presence of unwanted harmonics from the multiplication process, with interference observed in the downconverted reflections at selected frequency channels that could not be completely filtered out. Additional interference effects arising from internal reflections within the mm-wave assemblies were minimized using a high-speed switch which served to “gate out” much of these reflections. The USPR diagnostic was transported and installed onto the HIT-SIU plasma device, becoming operational on 11/08/2022. Although designed to span 3 distinct mm-wave bands, the HIT-SIU plasmas at this time were sufficiently low density such that only the lowest of the three bands was likely to have strong plasma reflections. The system was then set to operate on only the lowest band (assembly #1), with data collected every 1 μsec rather than 3 μsec which would have been the case when cycling through all three bands. Connected to HIT-SIU, time-varying plasma reflections were observed on 9 of 16 possible frequency channels. Close examination of the data collected revealed issues previously unobserved in laboratory testing, associated with (a) reflections from the small aperture horns required for operation within the HIT-SIU device, and (b) a dependence of the recorded TOF with the threshold voltage of a given channel. Plans were made to address each of these issues before undertaking any future campaigns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A Study of Integrated Signal and Power Transfer for Compact Isolated SiC MOSFET Gate-Drivers

This work discusses a novel set of alternate implementations of isolated gate driver circuits for power electronic transistors. The proposed topologies for the driver have been designed specifically for SiC power MOSFET. Three different solutions are discussed, all of them providing the required gate turn-on and turn-off command signal with galvanic isolation, but also supplying power to the secondary side of the driver by means of magnetic transformers. The resulting solutions, all of them implemented with simple circuitry, enable the integration of the driver into the power cell, allowing for theoretical higher power density values in the final system. The principle of operation of the different solutions is discussed, and then the main relevant implementation details are presented. After that, the operation of the circuits is demonstrated experimentally, by testing a set of prototypes of these drivers. This provides a comprehensive design example that assesses the feasibility of the proposed solutions. Finally, the main results of the performance of the three gate drivers, on an SiC MOSFET-based prototype are presented and compared.

42 ENGINEERING↗