Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Quantum mechanical algebraic variational methods for inelastic and reactive molecular collisions

The quantum mechanical problem of reactive or nonreactive scattering of atoms and molecules is formulated in terms of square-integrable basis sets with variational expressions for the reactance matrix. Several formulations involving expansions of the wave function (the Schwinger variational principle) or amplitude density (a generalization of the Newton variational principle), single-channel or multichannel distortion potentials, and primitive or contracted basis functions are presented and tested. The test results, for inelastic and reactive atom-diatom collisions, suggest that the methods may be useful for a variety of collision calculations and may allow the accurate quantal treatment of systems for which other available methods would be prohibitively expensive.

Schwenke, David W.↗
NASA NTRS1989

Reactive iron in marine sediments

The influence of reactive iron oxides on sediment pore-water chemistry is considered in detail. A carefully calibrated extraction scheme is used to determine the depth distributions of reactive iron phases at two very different localities: the relatively iron-rich Mississippi Delta and the relatively iron-poor FOAM site in Long Island Sound. Closed system incubations are used to characterize the rates of reaction between sulfide and both naturally occurring and pure iron mineral phases. Rates of iron liberation to pore solution are measured in the presence and absence of sulfate reduction, and the origin of dissolved iron in organic-rich sediments is speculated upon.

Canfield, Donald E.↗
NASA NTRS1989

Evidence for Phanerozoic reactivation of the Najd Fault System in AVHRR, TM, and SPOT images of central Arabia

SPOT stereoscopic and TM multispectral images support evidence in AVHRR thermal-IR images of a major unmapped shear zone in Phanerozoic cover rocks southeast of the ancient Najd Fault System in the Arabian Shield. This shear zone and faults of the Najd share a common alignment, orientation, and sinistral sense of movement. These similarities suggest a 200-km extension of the Najd Fault System and reactivation since it formed in the late Precambrian. Topographic and lithologic features in the TM and SPOT data along one of three faults inferred from the AVHRR data indicate sinistral offsets up to 2.5 km, en echelon folds and secondary faults like those predicted by models of left-lateral strike-slip faulting. The age of the affected outcrops indicates reactivation of Najd faults in the Cretaceous, judging from TM and SPOT data or in the Tertiary, based on AVHRR data. The total length of the system visible at the surface measures 1300 km. If the Najd Fault System is extrapolated beneath sands of the Empty Quarter to faults of a similar trend in South Yemen, the shear zone would span the Arabian Plate. Furthermore, if extensions into the Arabian Sea bed and into Egypt proposed by others are considered, it would exceed 3000 km.

Andre, Constance G.↗
NASA NTRS1990

Relative merits of reactive and forward-look detection for wind-shear encounters during landing approach for various microburst escape strategies

The goal was to quantify the benefits of airborne forward-look windshear detection and to develop and test a candidate set of strategies for recovery from inadvertent microburst encounters during the landing approach, given the utilization of both reactive-only and forward-look windshear detection. Candidate strategies were developed and evaluated using a non-piloted simulation consisting of a simple point-mass performance model of a transport-category airplane flying through an analytical microburst model. The results indicate that the factor which most strongly effects a microburst recovery is the time at which the recovery is initiated. Forward-look alerts given 10 seconds prior to microburst entry permitted recoveries to be made with negligible altitude loss. The results also show that no single microburst scenario can be used to evaluate the relative merits of various recovery strategies. The type of alert used to initiate the recovery (reactive or forward-look) and the altitude of the microburst encounter had an effect on the type of recovery strategy that performed best. These factors may have serious implications for the design and certification of windshear systems.

Hinton, David A.↗
NASA NTRS1989

Reactive behavior, learning, and anticipation

Reactive systems always act, thinking only long enough to 'look up' the action to execute. Traditional planning systems think a lot, and act only after generating fairly precise plans. Each represents an endpoint on a spectrum. It is argued that primitive forms of reasoning, like anticipation, play an important role in reducing the cost of learning and that the decision to act or think should be based on the uncertainty associated with the utility of executing an action in a particular situation. An architecture for an adaptable reactive system is presented and it is shown how it can be augmented with a simple anticipation mechanism that can substantially reduce the cost and time of learning.

Whitehead, Steven D.↗
NASA NTRS1990

Time-dependent wave-packet method for the complete determination of S-matrix elements for reactive molecular collisions in three dimensions

An alternative time-dependent wave-packet method for treating three-dimensional gas phase reactive atom-diatom collisions is presented. The method employs a nonreactive body-frame wave packet propagation procedure, made possible by judicious use of absorbing optical potentials, a novel scheme for interpolating the wave function from coordinates in one arrangement to those in another and the fact that the time-dependent Schroedinger equation is an initial-value problem. The last feature makes possible a computationally viable and accurate procedure for changing from one arrangement's coordinates to another. In addition, the method allows the determination of S-matrix elements over a wide range of energies from a single wave-packet propagation. The method is illustrated by carrying out detailed calculations of inelastic and reactive scattering in the H + H2 system using the Liu-Siegbahn-Truhlar-Horowitz potential surface.

Judson, Richard S.↗
NASA NTRS1990

Measurements of reactive nitrogen oxides (NO/y/) within and above a tropical forest canopy in the wet season

Measurements of ambient concentrations of reactive nitrogen oxides were made in the Amazon rain forest, near Manaus, Brazil, continuously at 39 m (above the canopy), and on several days and nights at 19 m (within the canopy). Concentrations were very low, typically 100-700 pptv, except for brief periods when up to 5000 pptv of NO(y) was observed, indicating polluted air from the urban area of Manaus. The forest was a net sink for NO(y) with the NO(y) flux = -7.6 + or - 5.0) x 10 to the 9th molecules/sq cm per sec in unpolluted periods, even though soils emitted NO at a significant rate (8.9 + or - 1.5 x 10 to the 9th molecules/sq cm per sec). The deposition rate for NO(y) appeared to be much larger during the daytime than at night, suggesting that uptake was controlled either by plant processes (stomatal opening) or by supply of reactive components of NO(y) (e.g., HNO3) during the daytime. Implications for regional and global atmospheric chemistry are discussed.

Bakwin, Peter S.↗
NASA NTRS1990

Reactivity of pi-complexes of Ti, V, and Nb towards dithioacetic acid: Synthesis and structure of novel metal sulfur-containing complexes

In order to use sulfur-containing resources economically and with minimal environmental damage, it is important to understand the desulfurization processes. Hydrodesulfurization, for example, is carried out on the surface of a heterogeneous metal sulfide catalyst. Studies of simple, soluble inorganic systems provide information regarding the structure and reactivity of sulfur-containing compounds with metal complexes. Further, consistent with recent trends in materials chemistry, many model compounds warrant further study as catalyst precursors. The reactivity of low-valent organometallic sandwich pi-complexes toward dithiocarboxylic acids is described. For example, treatment of bisbenzene vanadium with CH3CSSH affords a divanadium tetrakis(dithioacetate) complex. The crystallographically determined V-V bond distance, 2.800(2), is nearly the same as the V-V bond distance in a V(mu-nu squared-S2)2V' unit in the mineral patonite (VS4)n. The stability of the V2S4 core in the dimer is demonstrated by evidence of V2S4(+) in the mass spectrum (70 eV, solid probe) of the vanadium dimer. Several other systems relevant to HDS catalysis are also discussed.

Duraj, Stan A.↗
NASA NTRS1991

The influence of polar heterogeneous processes on reactive chlorine at middle latitudes - Three dimensional model implications

Three-dimensional model calculations with the NASA/GSFC chemistry and transport model have been designed to consider the impact of heterogeneous processes occurring on polar stratospheric clouds (PSCs) in the Arctic vortex on the HCl distribution. By examining the HCl concentration for a calculation with PSCs relative to a calculation with gas phase chemistry only, the impact of polar processing on reactive chlorine species at middle latitudes is inferred. Results from the chemistry and transport model reproduce basic features of the ClO measurements (Toohey et al., 1991), which were made on the ferry flights of the ER-2 from Stavanger, Norway to Moffett Field, California via Wallops Island, Virginia on February 20 and 21, 1989. The model indicates that perturbed air which is contained within the polar vortex during winter is not homogeneously mixed, and that the ferry flights were made through air with the largest conversion of HCl to reactive chlorine that is seen at middle latitudes.

Douglass, Anne R.↗
NASA NTRS1991

Recent spectroscopic findings concerning clay/water interactions at low humidity: Possible applications to models of Martian surface reactivity

A feasibility study assessing the utility of the adaptation of near infrared correlation spectroscopy to quantifying iron and adsorbed water in some clay-based Mars soil analog materials (MarSAM's). The work was intended to constitute Phase 1 of an approach to identifying optical analytical wavelength regions, not only for important mineral classes, but for chemically active centers within them. Many of these centers are common to unrelated mineral classes and of disproportionate influence relative to the mineral structure as a whole in determining the surface reactivity of mineral surfaces. We previously reported linearity between reflectance and total iron and total moisture over a large range of both key variables. We also discovered interesting relationships between the intensity of iron bands and the relative humidity of the systems. These relationships were confirmed. We also show that, in the low humidity range, reflectance is linearly dependent on a different kind of water from that best representing the full humidity range (the kind of water associated, in clays, with surface acidity). These relationships and the sensitivity and capability of quantitation of near infrared data indicate high promise with the production of reactive surface intermediates of products of surface reactions.

Coyne, L.↗
NASA NTRS1991

Inelastic and reactive scattering of hyperthermal atomic oxygen from amorphous carbon

The reaction of hyperthermal oxygen atoms with an amorphous carbon-13 surface was studied using a modified universal crossed molecular beams apparatus. Time-of-flight distributions of inelastically scattered O-atoms and reactively scattered CO-13 and CO2-13 were measured with a rotatable mass spectrometer detector. Two inelastic scattering channels were observed, corresponding to a direct inelastic process in which the scattered O-atoms retain 20 to 30 percent of their initial kinetic energy and to a trapping desorption process whereby O-atoms emerge from the surface at thermal velocities. Reactive scattering data imply the formation of two kinds of CO products, slow products whose translational energies are determined by the surface temperature and hyperthermal (Approx. 3 eV) products with translational energies comprising roughly 30 percent of the total available energy (E sub avl), where E sub avl is the sum of the collision energy and the reaction exothermicity. Angular data show that the hyperthermal CO is scattered preferentially in the specular direction. CO2 product was also observed, but at much lower intensities than CO and with only thermal velocities.

Minton, Timothy K.↗
NASA NTRS1992

Reactivation and upgrade of the NASA Ames 16-Inch Shock Tunnel - Status report

The NASA Ames 16-Inch Shock Tunnel has been reactivated after seventeen years of inactivity. In the years before deactivating the facility, it was operated at enthalpies of 4,700 J/gm and pressures up to 260 atm or at enthalpies of 1900 J/gm over a wide pressure range. Since reactivating, the facility has been operated at enthalpies up to 12,000 J/gm and pressures up to 408 atm. The present paper describes the steps taken in upgrading the facility and summarizes the currently achievable conditions. The selection of the driver gas, the steps taken to improve the driver burn, and the diaphragm opening techniques are described. The pressure and heat flux instrumentation, the optical diagnostics and the data acquisition system are also described.

Bogdanoff, David W.↗
NASA NTRS1992

Photochemical partitioning of the reactive nitrogen and chlorine reservoirs in the high-latitude stratosphere

The correlated set of measurements in the lower stratosphere from polar missions of the NASA ER-2 is used to derive partitioning of the major components of the reactive nitrogen and inorganic chlorine reservoirs. The results provide a consistent method for comparing distributions, and hence the controlling processes, between different areas of the near-polar regions. Clear evidence of the effects of heterogeneous processes in the atmosphere is found. Values for NO2, ClONO2, N2O5, and Cl2O2 are derived in a simplified steady-state model based on in situ NO, ClO, O3, temperature, and pressure measurements, laboratory-measured reaction rates; and modeled photodissociation rates. Values for the reservoir totals are independently derived from measurements of N2O, organic chlorine, and total reactive nitrogen. The relative abundances of the measured and derived species within the reservoirs are calculated, and the longer-lived species HCl and HNO3 are estimated as the residuals of their respective reservoirs.

Kawa, S. R.↗
NASA NTRS1992

Studies on the reactive melt infiltration of silicon and silicon-molybdenum alloys in porous carbon

Investigations on the reactive melt infiltration of silicon and silicon-1.7 and 3.2 at percent molybdenum alloys into porous carbon preforms have been carried out by process modeling, differential thermal analysis (DTA) and melt infiltration experiments. These results indicate that the initial pore volume fraction of the porous carbon preform is a critical parameter in determining the final composition of the raction-formed silicon carbide and other residual phases. The pore size of the carbon preform is very detrimental to the exotherm temperatures due to liquid silicon-carbon reactions encountered during the reactive melt infiltration process. A possible mechanism for the liquid silicon-porous (glassy) carbon reaction has been proposed. The composition and microstructure of the reaction-formed silicon carbide has been discussed in terms of carbon preform microstructures, infiltration materials, and temperatures.

Singh, M.↗
NASA NTRS1992

Using qualitative maps to direct reactive robots

The principal advantage of mobile robots is that they are able to go to specific locations to perform useful tasks rather than have the tasks brought to them. It is important therefore that the robot be used to reach desired locations efficiently and reliably. A mobile robot whose environment extends significantly beyond its sensory horizon must maintain a representation of the environment, a map, in order to attain these efficiency and reliability requirements. We believe that qualitative mapping methods provide useful and robust representation schemes and that such maps may be used to direct the actions of a reactively controlled robot. In this paper we describe our experience in employing qualitative maps to direct, through the selection of desired control strategies, a reactive-behavior based robot. This mapping capability represents the development of one aspect of a successful deliberative/reactive hybrid control architecture.

Bertin, Randolph↗
NASA NTRS1993

A review of chemically reactive turbulent flow mixing mechanisms and a new design for a low NO(x) combustor

A review of chemically reactive flow analysis is presented. Key studies are reviewed. The approaches to modeling chemically reactive flows that are discussed are PDF, conserved PDF, conserved scalar, stochastic, and mixing length. Turbulent mixing mechanisms are also discussed and a model is formulated that could be used for optimizing non-premixed gas reacting systems. Consequently, a re-examination of the NO(x) reduction concepts for nonpremixed reactants are suggested together with two new designs for low NO(x) subsonic combustor research.

Mcbeath, Giorgio↗
NASA NTRS1994

Reactive Melt Infiltration Of Silicon Into Porous Carbon

Report describes study of synthesis of silicon carbide and related ceramics by reactive melt infiltration of silicon and silicon/molybdenum alloys into porous carbon preforms. Reactive melt infiltration has potential for making components in nearly net shape, performed in less time and at lower temperature. Object of study to determine effect of initial pore volume fraction, pore size, and infiltration material on quality of resultant product.

Behrendt, Donald R.↗
NASA NTRS1994

Formation and chemical reactivity of carbon fibers prepared by defluorination of graphite fluoride

Defluorination of graphite fluoride (CFX) by heating to temperatures of 250 to 450 C in chemically reactive environments was studied. This is a new and possibly inexpensive process to produce new carbon-based materials. For example, CF 0.68 fibers, made from P-100 carbon fibers, can be defluorinated in BrH2C-CH = CH-CH2Br (1,4-dibromo-2butene) heated to 370 C, and graphitized to produce fibers with an unusually high modulus and a graphite layer structure that is healed and cross-linked. Conversely, a sulfur-doped, visibly soft carbon fiber was produced by defluorinating CF 0.9 fibers, made from P-25, in sulfur (S) vapor at 370 C and then heating to 660 C in nitrogen (N2). Furthermore, defluorination of the CF 0.68 fibers in bromine (Br2) produced fragile, structurally damaged carbon fibers. Heating these fragile fibers to 1100 C in N2 caused further structural damage, whereas heating to 150 C in bromoform (CHBr3) and then to 1100 C in N2 healed the structural defects. The defluorination product of CFX, tentatively called activated graphite, has the composition and molecular structure of graphite, but is chemically more reactive. Activated graphite is a scavenger of manganese (Mn), and can be intercalated with magnesium (Mg). Also, it can easily collect large amounts of an alloy made from copper (Cu) and type 304 stainless steel to form a composite. Finally, there are indications that activated graphite can wet metals or ceramics, thereby forming stronger composites with them than the pristine carbon fibers can form.

Hung, Ching-Cheh↗