Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Generation of Large-Volume High-Pressure Plasma by Spatio-Temporal Control of Space Charge

Due to the fundamental limitations of scaling, very little progress has been made towards achieving a large-volume dense non-equilibrium plasma near atmospheric pressures. Commercially available state-of-the art glow-like atmospheric plasma devices for industrial applications are either narrow tubes or wide slits with narrow openings. Often multiple sources are put together in various configurations to process larger surfaces. The traditional methods of exciting electrodes create spatially fixed electric fields. As a result, the space charge at atmospheric pressure tends to be spatially confined resulting in non-uniformity which eventually leads to instability as the discharge is scaled. Theoretical work done under this project showed that it is possible to generate a spatially rotating electric field by exciting a set of electrodes with phase staggered sinusoidal waveforms. The modeling and simulations were done using plasma fluid models. It was shown that such a field can produce a uniform plasma. At the conclusion of the project, experimental proof of concept with an eight-electrode system in various gases (Air, Helium and Argon) was demonstrated. Power measurements and spectral investigation show that the concept can be used to generate a uniform stable plasma. This plasma source has the potential of opening new applications of nonthermal plasma including combustion of carbon-free fuel. The current limitation of the proposed method in scaling to higher volume and pressure is the need for multiple high voltage amplifiers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Molecular admixtures and impurities in atmospheric pressure plasma jets

A more complete understanding of reactive chemistry generated by atmospheric pressure plasma jets (APPJs) is critical to many emerging medical, agricultural, and water treatment applications. Adding molecular gases to the noble working gas which flows through the jet is a common method to tailor the resulting production of reactive oxygen and nitrogen species (RONS). In this paper, results are discussed from a computational investigation of the consequences of H 2 O and O 2 admixtures on the reactive chemistry of He APPJs flowing into humid air. This investigation, performed with a 2-dimensional plasma hydrodynamics model, addresses the RONS that are initially produced and the evolution of that chemistry on longer time scales. Without an admixture, the impurities in 99.999% pure helium are a major source of RONS. The addition of H 2 O decreases the production of reactive nitrogen species (RNS) and increases the production of reactive oxygen species (ROS). The addition of O 2 significantly decreases the production of RNS, as well as hydrogen-containing ROS, but increases the production of ROS without hydrogen. This selectivity comes from the lower ionization energy of O 2 compared to N 2 and H 2 O, which then allows for charge exchange reactions. These charge exchange reactions change the RONS which are produced in the afterglow by dissociative recombination. The consequences of impurities were also examined. Humid air impurities as low as 10 ppm in the helium can account for 79%-98% of the production of most RONS in the absence of an intentional admixture. The degree to which the impurities affect the RONS production depends on the electrode configuration and can be reduced by molecular admixtures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electric probe investigations of microwave generated, atmospheric pressure, plasma jets

We examine the applicability of the Langmuir-type of characterization for atmospheric pressure plasma jets generated in a millimeter-size cavity microwave resonator at 2.45 GHz. Wide range I-V characteristics of helium, argon, nitrogen, air and oxygen are presented for different gas fluxes, distances probe-resonator, and microwave powers. A detailed analysis is performed for the fine variation in the current around the floating potential. A simplified theory specially developed for this case is presented, considering the ionic and electronic saturation currents and the floating potential. Based on this theory, we conclude that, while the charge carrier density depends on gas flow, distance to plasma source, and microwave absorbed power, the electron temperature is quite independent of these parameters. The resulting plasma parameters for helium, argon, and nitrogen are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reaction Pathways and Energy Consumption in NH 3 Decomposition for H 2 Production by Low Temperature, Atmospheric Pressure Plasma

Pathways for NH 3 decomposition to N 2 and N 2 H 4 by atmospheric pressure nonthermal plasma are analyzed using a combination of molecular beam mass spectrometry measurements and zero-dimensional kinetic modeling. Experimental measurements show that NH 3 conversion and selectivity towards N 2 formation scale monotonically with the specific energy input into the plasma with ~ 100% selectivity to N 2 formation achieved at specific energy inputs above 0.12 J cm −3 (3.1 eV (molecule NH 3 ) −1 ). The kinetic model recovers these trends, although it underpredicts N 2 selectivity at low specific energy input. These discrepancies can be explained by the underestimation of reaction rate coefficients for reactions that consume N 2 H x species in collisions with H radicals and/or radial nonuniformities in power deposition, gas temperature, and species concentrations that are not represented by the plug flow approximation used in the model. The kinetic model shows that N 2 formation proceeds through N 2 H x decomposition pathways rather than NH x decomposition pathways in low temperature, atmospheric pressure plasma. Higher selectivity toward N 2 production can be achieved by operating at higher NH 3 conversion and with a higher gas temperature. Furthermore, the high energy cost of NH 3 decomposition by atmospheric pressure nonthermal plasma found in this work (25–50 eV (molecule NH 3 converted) −1 ; 17–33 eV (molecule H 2 formed) −1 ) is a result of the energy requirement for electron-impact dissociation of NH 3 and the significant re-formation of NH 3 by three-body recombination reactions between NH 2 and H.

Nonthermal plasma↗

On the mechanism of atmospheric pressure plasma plume

For the purpose of unveiling the parameters influencing the length of atmospheric pressure plasma plume, an over 165 cm long argon plasma plume is generated in the quartz tube attached to the nozzle of the device. Dependence of plasma length on discharge parameters such as applied voltage, frequency of power supply, and argon gas flow rate was investigated. Experimental results indicated that (a) the applied voltage plays crucial roles on plasma plume length, that is, the plasma plume length exponentially increases with the applied voltage, (b) the plasma plume length increases with frequency, more obviously when the applied voltage is higher, (c) the plasma plume length increases with argon gas flow rate, reaches its maximum at critical value of the gas flow rate, and then decreases again. An evaluation of the physical phenomena involved in streamer propagation, particularly of the energy balance, was investigated. The numerical results were qualitatively consistent with previous experimental results by successfully indicating the high velocity of ''plasma bullet'' and providing physical mechanism of energy balance determining streamer length.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of the low-pressure plasma effect on polypropylene nonwovens

In this work we have used low-pressure plasma with a gas based on methane and oxygen mixture to improve wettability and durability of a PP nonwoven fabrics. The obtained results show good durability with the use of methane-oxygen plasma mixture gas. The effects of the plasma are similar to a plasmapolymerization process but in this case we obtain hydrophilic properties with high durability. The surface does not suffer important changes and the roughness of the material remains constant.

36 MATERIALS SCIENCE↗

Propagation of atmospheric pressure plasmas through interconnected pores in dielectric materials

We report the propagation of atmospheric pressure plasmas (APPs) on and through porous dielectric materials is being investigated for plasma-catalysis and functionalizing biomedical materials for tissue scaffolding and bone regeneration. Such plasma functionalization improves wettability and cell attachment, and so uniformity of the treatment of the pore surfaces is important. The method of propagation of APPs through porous media is not well characterized. In this paper, we discuss results from a computational investigation of humid air APPs propagating through short fully interconnected pore-chains in a dielectric substrate. The properties of the dielectric and pores (diameter 150 μm) were chosen to resemble bone scaffolding. We found that photoionization is an important feature in plasma propagation through pore-chains to seed electrons in the following pore in the chain. This seeding of electrons in regions of high electric field allows for the formation of micro-streamers and surface ionization waves. This is particularly important when the openings between pores are small. The orientation of the pore-chain with respect to the applied electric field has a significant impact on plasma generation, mode of propagation, and fluences of short-lived, reactive species to the surfaces of the pores. The uniformity of fluences of charged and short-lived neutral species to the pore surfaces decreases as the angle of the pore chain deviates from being aligned with the applied electric field. Diffusion within pores

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of metallic powder behavior in very low pressure plasma spraying (VLPPS) — Application to the manufacturing of titanium–aluminum coatings

In this study, metallic materials made of aluminum and titanium were manufactured implementing very low pressure plasma spraying (VLPPS). Aluminum was selected at first as a demonstrative material due to its rather low vaporization enthalpy ( i.e ., 381.9 kJ·mol⁻¹). Developments were then carried out with titanium which exhibits a higher vaporization enthalpy ( i.e. , 563.6 kJ·mol⁻¹). Optical emission spectroscopy (OES) was implemented to analyze the behavior of each solid precursor (metallic powders) when it is injected into the plasma jet under very low pressure ( i.e. , in the 150 Pa range). Besides, aluminum, titanium and titanium–aluminum coatings were deposited in the same conditions implementing a stick-cathode plasma torch operated at 50 kW, maximum power. Coating phase compositions were identified by X-Ray Diffraction (XRD). Coating elementary compositions were quantified by Glow Discharge Optical Emission Spectroscopy (GDOES) and Energy Dispersive Spectroscopy (EDS) analyses. The coating structures were observed by Scanning Electron Microscopy (SEM). The coating void content was determined by Ultra-Small Angle X-ray Scattering (USAXS). The coatings exhibit a two-scale structure corresponding to condensed vapors (smaller scale) and solidified areas (larger scale). Titanium–aluminum sprayed coatings, with various Ti/Al atomic ratios, are constituted of three phases: metastable α-Ti, Al and metastable α₂-Ti₃Al. This latter is formed at elevated temperature in the plasma flow, before being condensed. Its rather small fraction, impeded by the rather small amount of vaporized Ti, does not allow modifying however the coating hardness.

Vautherin, B.↗

Nonequilibrium atmospheric pressure plasma with ultrahigh electron density and high performance for glass surface cleaning

We produced a nonequilibrium atmospheric pressure plasma by applying an alternative current between two electrodes. The gas temperature and electron density were evaluated using optical emission spectroscopy. It was found that the plasma had gas temperatures from 1800 to 2150 K and ultrahigh electron densities in the order of 10{sup 16} cm{sup -3}. A remarkably high oxygen radical concentration of 1.6x10{sup 15} cm{sup -3} was obtained at a 1% O{sub 2}/Ar gas flow rate of 15 slm (standard liters per minute). Contact angles below 10 deg. were obtained in the process of glass cleaning with a plasma exposure time of 23 ms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tribological Characterization of SiC and B{sub 4}C Manufactured by Plasma Pressure Compaction

The objective of the present study was to assess the tribological properties and the wear behavior of silicon carbide and boron carbide ceramics, produced by the plasma pressure compaction sintering process. Reciprocating sliding tests were executed to evaluate the tribological behavior of silicon carbide and boron carbide. Samples of each material with distinct values of surface roughness Ra were tested. Wear mass loss, coefficients of friction and wear mechanism of the boron carbide and silicon carbide were evaluated by means of microscopes and an energy-dispersive spectroscopy probe. The coefficient of friction of the evaluated boron carbide was found to be 0.8, and the surface roughness affects only the starting transient, while for silicon carbide the steady-state value ranges from 0.5 to 0.8 depending on the roughness value Ra.

36 MATERIALS SCIENCE↗

Plasma pressures in the magnetosphere

Plasma energy density estimation near equatorial magnetopause considering only solar wind protons and plasma effect on geomagnetic field

PLASMA SPECTRUM↗

Characteristics of high-purity Cu thin films deposited on polyimide by radio-frequency Ar/H{sub 2} atmospheric-pressure plasma jet

With a view to fabricating future flexible electronic devices, an atmospheric-pressure plasma jet driven by 13.56 MHz radio-frequency power is developed for depositing Cu thin films on polyimide, where a Cu wire inserted inside the quartz tube was used as the evaporation source. A polyimide substrate is placed on a water-cooled copper heat sink to prevent it from being thermally damaged. With the aim of preventing oxidation of the deposited Cu film, we investigated the effect of adding H{sub 2} to Ar plasma on film characteristics. Theoretical fitting of the OH emission line in OES spectrum revealed that adding H{sub 2} gas significantly increased the rotational temperature roughly from 800 to 1500 K. The LMM Auger spectroscopy analysis revealed that higher-purity Cu films were synthesized on polyimide by adding hydrogen gas. A possible explanation for the enhancement in the Cu film deposition rate and improvement of purity of Cu films by H{sub 2} gas addition is that atomic hydrogen produced by the plasma plays important roles in heating the gas to promote the evaporation of Cu atoms from the Cu wire and removing oxygen from copper oxide components via reduction reaction.

36 MATERIALS SCIENCE↗

Dynamics of the water-plasma interface in various discharge modes of atmospheric-pressure plasmas

This paper presents an experimental study of the dynamics of the water-plasma interface during the interaction high-voltage (HV) atmospheric pressure discharge with the water surface. Under the influence of the voltage applied to the pin type electrode, discharges are formed at the air layer between the sharp-tip HV electrode and deionized water. Three discharge regimes were identified from synchronized electrical waveforms and imaging: (i) a weak linear regime at 3–10.6 kV, (ii) a branching streamer regime at the maximum applied voltage of 12.6 kV, and (iii) a continuous arc-like regime occurring during the transition to lower voltage and higher current (e.g., U ≈ 3.2 kV, I ≈ 4.07 mA). High-speed shadowgraph images showed a symmetric interfacial cavity whose depth increased nonlinearly with voltage from h 0 ≈ 0.1 mm at 3 kV to h 0 ≈ 2.7 mm at 10.6 kV, reaching a maximum depth of h 0 ≈ 5.9 mm at 12.6 kV, while the cavity disappeared in the continuous-channel regime and was replaced by outward-propagating wave-like motion. The deformation of the water surface during the discharge-water interaction is governed by the balance between electric field forces, surface tension, gravitational forces, and electrohydrodynamic forces, whose relative contributions vary with the applied voltage. This effect was explained by quantitatively estimating the magnitudes of the acting forces and establishing the force balance. Optical emission spectroscopy in the continuous-channel regime indicated air plasma signatures and yielded a gas temperature of approximately 400 K, while prolonged operation (≈ 20 min) increased the water temperature to ~ 70 °C, reduced the water-layer thickness from 6 mm to 3 mm, and decreased pH from 7 to 4. These regime-resolved, quantitative results clarify how the dominant interfacial forcing shifts with discharge mode and provide a mechanistic basis for controlling plasma-water interactions in atmospheric-pressure applications.

atmospheric pressure plasma↗

Selective killing of ovarian cancer cells through induction of apoptosis by nonequilibrium atmospheric pressure plasma

Two independent ovarian cancer cell lines and fibroblast controls were treated with nonequilibrium atmospheric pressure plasma (NEAPP). Most ovarian cancer cells were detached from the culture dish by continuous plasma treatment to a single spot on the dish. Next, the plasma source was applied over the whole dish using a robot arm. In vitro cell proliferation assays showed that plasma treatments significantly decreased proliferation rates of ovarian cancer cells compared to fibroblast cells. Flow cytometry and western blot analysis showed that plasma treatment of ovarian cancer cells induced apoptosis. NEAPP could be a promising tool for therapy for ovarian cancers.

60 APPLIED LIFE SCIENCES↗

An Assessment of the Residual Stresses in Low Pressure Plasma Sprayed Coatings on an Advanced Copper Alloy

Modeling studies were conducted on low pressure plasma sprayed (LPPS) NiAl top coat applied to an advanced Cu-8(at.%)Cr-4%Nb alloy (GRCop-84) substrate using Ni as a bond coat. A thermal analysis suggested that the NiAl and Ni top and bond coats, respectively, would provide adequate thermal protection to the GRCop-84 substrate in a rocket engine operating under high heat flux conditions. Residual stress measurements were conducted at different depths from the free surface on coated and uncoated GRCop-84 specimens by x-ray diffraction. These data are compared with theoretically estimated values assessed by a finite element analysis simulating the development of these stresses as the coated substrate cools down from the plasma spraying temperature to room temperature.

Raj, S. V.↗

Simulation study of nanoparticle coating in a low pressure plasma reactor

A self-consistent combination of plasma fluid model, nanoparticle heating model, and surface deposition model is used to investigate the coating of nanosize particles by amorphous carbon layers in a low pressure plasma reactor. The numerical results show that, owing to the net heat release in the surface reactions, the particle temperature increases and its equilibrium value remains always 50 K above the background gas temperature. The deposition rate decreases with increasing of the particle temperature and the corresponding time scale is of the order of 10 ms. The deposition rate is also strongly affected by the change in plasma parameters. When the electron temperature is increased, the deposition rate first increases due to the enhanced ion and radical generation, shows a maximum and then declines as the particle temperature rises above the gas temperature. An enhancement in the background gas pressure and/or temperature leads to a reduction in the deposition rate, which can be explained in terms of the enhanced etching by atomic hydrogen and particle heating by the background gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of He in enhancing the intensity and lifetime of H and D emissions from laser-induced atmospheric-pressure plasma

A series of measurements have been performed on the time dependences of the intensities of helium, hydrogen, and deuterium emission lines from the corresponding laser-induced helium plasma at atmospheric pressure for two different He flow rates. The prolonged H{sub a}lpha and H{sub b}eta emissions along with their constant intensity ratio over a relatively extended period indicate the need to provide an alternative excitation mechanism other than the well-known thermal excitation process in a hot plasma. This additional excitation mechanism is also related to the metastable excited state of a He atom as indicated by the similar characteristics of the observed time dependence of the emission intensities. The enhanced intensity and lifetime of He emission at a high He flow rate was explained in terms of the collision-induced increase in the number of He atoms excited to above the 2 {sup 1}S{sub 0} metastable state, which was also responsible for the delayed excitation of H and D atoms via an energy transfer mechanism involving a Penning-like chemi-ionization process. Finally, the benefits of He-assisted delayed excitation of H and D atoms and the aforementioned enhanced intensity and lifetime at a high He flow rate were demonstrated by the achievement of clearly resolved H{sub a}lpha and D{sub a}lpha emission lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atmospheric pressure plasma jet in Ar and Ar/H{sub 2}O mixtures: Optical emission spectroscopy and temperature measurements

An atmospheric pressure plasma jet generated in Ar/water vapor mixtures has been investigated and the effect of water content on plasma properties has been studied. Plasma generated in Ar/water (0.05%) mixture shows higher intensity of OH radicals in emission spectra than pure argon alone. Plasma density has been estimated from current measurement and is in order of 1.5x10{sup 13} cm{sup -3}. Electron temperature has been estimated as 0.97 eV in pure Ar and it decreases with an increase in water content in plasma. The gas temperature has been determined by fitting of the experimental spectra and using the Boltzmann plot method. The gas temperature increases with the addition of water to feed gas from 620 K in pure Ar up to 1130 K for 0.76%H{sub 2}O.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗