Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Al2O3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Olefin metathesis over supported MoO x catalysts: influence of the oxide support

Here, a series of supported MoO x catalysts on different oxide supports (Al2O3, TiO2, ZrO2, SiO2) were synthesized and investigated for propylene metathesis, characterized with in situ spectroscopies (DRIFTS, Raman, UV-vis) and chemically probed with propylene-TPSR-MS, propylene-TPSR-IR, and ethylene/2-butene titration. Under dehydrated conditions at monolayer coverage or maximum surface dispersion, the surface MoO x sites are present as a mixture of isolated di-oxo (O=) 2 Mo(–O–Al) 2 and oligomeric mono-oxo O=Mo(–O–Al) 4/5 sites on Al 2 O 3 , primarily oligomeric mono-oxo O=Mo(–O–Ti) 4/5 on TiO 2 , isolated di-oxo (O=) 2 Mo(–O–Zr) 2 and oligomeric mono-oxo O=Mo(–O–Zr) 4/5 on ZrO 2 , and isolated di-oxo (O=) 2 Mo(–O–Si) 2 on SiO 2 . The bridged (S 2 -OH) and tri-coordinated (S 3 -OH) anchoring surface hydroxyls of the oxide supports with strong support cation electronegativity control the activation and number of active surface MoO x sites at low temperatures (<100 °C). The isolated anchoring surface hydroxyls (S-OH) of the oxide supports with strong support cation electronegativity control the activation and number of active surface MoO x sites at high temperatures (>350 °C). Olefin metathesis by the more redox active supported MoO x /TiO 2 and MoO x /ZrO 2 catalysts is retarded by the formation of stable surface acetone and acetate species that block olefin adsorption. The oxide supports are potent ligands that tune the activation and surface chemistry of the surface MoOx sites for olefin metathesis. This is the first time that the influence of oxide supports on the activation and surface chemistry of supported MoO x sites has been systematically examined.

02 PETROLEUM↗
DOE OSTI2022

Spectral and polarization based imaging in deep-ultraviolet excited photoelectron microscopy

Using photoelectron emission microscopy, nanoscale spectral imaging of atomically thin MoS2 buried between Al2O3 and SiO2 is achieved by monitoring the wavelength and polarization dependence of the photoelectron signal excited by deep-ultraviolet light. Although photons induce the photoemission, images can exhibit resolutions below the photon wavelength as electrons sense the response. To validate this concept, the dependence of photoemission yield on the wavelength and polarization of the exciting light was first measured and then compared to simulations of the optical response quantified with classical optical theory. A close correlation between experiment and theory indicates that photoemission probes the optical interaction of UV-light with the material stack directly. The utility of this probe is then demonstrated when both the spectral and polarization dependence of photoemission observe spatial variation consistent with grains and defects in buried MoS2. Taken together, these new modalities of photoelectron microscopy allow mapping of optical property variation at length scales unobtainable with conventional light-based microscopy.

Beechem, Thomas E. (ORCID:0000000275360719)↗
DOE OSTI2024

Dielectric loss due to charged-defect acoustic phonon emission

The coherence times of state-of-the-art superconducting qubits are limited by bulk dielectric loss, yet the microscopic mechanism leading to this loss is unclear. Here, we propose that the experimentally observed loss can be attributed to the presence of charged defects that enable the absorption of electromagnetic radiation by the emission of acoustic phonons. Our explicit derivation of the absorption coefficient for this mechanism allows us to derive a loss tangent of 7.2 × 10−9 for Al2O3, in good agreement with recent high-precision measurements [Read et al., Phys. Rev. Appl. 19, 034064 (2023)]. We also find that for temperatures well below ∼0.2 K, the loss should be independent of temperature, which is also in agreement with observations. Our investigations show that the loss per defect depends mainly on properties of the host material, and a high-throughput search suggests that diamond, cubic BN, AlN, and SiC are optimal in this respect.

Turiansky, Mark E. (ORCID:0000000291543582)↗
DOE OSTI2025

Characterization of chromium impurities in β -Ga2O3

Chromium is a common transition-metal impurity that is easily incorporated during crystal growth. It is perhaps best known for giving rise to the 694.3 nm (1.786 eV) emission in Cr-doped Al2O3, exploited in ruby lasers. Chromium has also been found in monoclinic gallium oxide, a wide-bandgap semiconductor being pursued for power electronics. In this work, we thoroughly characterize the behavior of Cr in Ga2O3 through theoretical and experimental techniques. β-Ga2O3 samples are grown with the floating zone method and show evidence of a sharp photoluminescence signal, reminiscent of ruby. We calculate the energetics of formation of Cr from first principles, demonstrating that Cr preferentially incorporates as a neutral impurity on the octahedral site. Cr possesses a quartet ground-state spin and has an internal transition with a zero-phonon line near 1.8 eV. By comparing the calculated and experimentally measured luminescence lineshape function, we elucidate the role of coupling to phonons and uncover features beyond the Franck–Condon approximation. The combination of strong emission with a small Huang–Rhys factor of 0.05 and a technologically relevant host material renders Cr in Ga2O3 attractive as a quantum defect.

Turiansky, Mark E. (ORCID:0000000291543582)↗
DOE OSTI2026

Crystallographic registry in epitaxial V3O5 thin films

Crystallographic orientation plays a central role in determining transport properties in correlated oxides with low-hysteresis metal–insulator transitions. Here, V3O5 thin films were grown on Al2O3 (0001) and their crystallographic registry was evaluated using x-ray diffraction and cross-sectional transmission electron microscopy. θ–2θ measurements show a single out-of-plane orientation defined by the (202) reflection. Azimuthal φ-scans of the V3O5 (310) reflection exhibit twelve discrete maxima over 360°, indicating a finite set of in-plane orientations imposed by the substrate symmetry. High-resolution TEM and fast Fourier transform analysis confirm crystallographic coherence at the film–substrate interface. The electrical conductivity exhibits a metal–insulator transition at TMIT ≈ 423 K with no measurable thermal hysteresis and a total change of ~1.6 orders of magnitude between 300 and 480 K. These results establish crystallographic registry in epitaxial V3O5 thin films and provide a structurally well-defined system for future studies of orientation-dependent transport.\r\nT

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quadratic magnetoresistance across the insulator–metal transition in V4O7 thin films

We present a comparative magnetotransport study of V4O7 thin films grown simultaneously on single-crystal Al2O3 (r-cut) and amorphous SiO2 substrates, to examine substrate-induced effects on electronic transport across the insulator–metal transition (IMT). Temperature-dependent resistivity reveals a broad electronic ordering regime below the IMT, with both films exhibiting similar transition temperatures but differing by nearly an order of magnitude in absolute resistivity. Despite this strong substrate dependence of the resistivity scale, the magnetoresistance remains predominantly quadratic in magnetic field over wide temperature intervals for both substrates. Analysis of the quadratic magnetoresistance defines an effective mobility scale that evolves systematically across the IMT and exhibits a similar temperature dependence for the two films. Structural characterization, including atomic-resolution scanning transmission electron microscopy of the V4O7/Al2O3 interface and azimuthal X-ray diffraction measurements, reveals a sharp interface and well-defined in-plane crystallographic registry for the r-cut film, in contrast to the rotationally averaged in-plane structure expected for films grown on amorphous SiO2. These results indicate that while substrate-controlled structural registry modifies the resistivity scale, the quadratic magnetotransport response across the IMT remains largely robust, providing a consistent diagnostic of electronic transport in V4O7 thin films.

25 ENERGY STORAGE↗
DOE OSTI2020

Prediction of giant and ideal Rashba-type splitting in ordered alloy monolayers grown on a polar surface

Abstract A large and ideal Rashba-type spin-orbit splitting is desired for the applications of materials in spintronic devices and the detection of Majorana fermions in solids. Here, we propose an approach to achieve giant and ideal spin-orbit splittings through a combination of ordered surface alloying and interface engineering, that is, growing alloy monolayers on an insulating polar surface. We illustrate this unique strategy by means of first-principle calculations of buckled hexagonal monolayers of SbBi and PbBi supported on Al2O3(0001). Both systems display ideal Rashba-type states with giant spin-orbit splittings, characterized with energy offsets over 600 meV and momentum offsets over 0.3 Å−1, respectively. Our study thus points to an effective way of tuning spin-orbit splitting in low-dimensional materials to draw immediate experimental interest.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

THE IMPACT OF OXIDATION-INDUCED DEGRADATION ON MATERIALS USED IN HYDROGEN-FIRED MICROTURBINES

Hydrogen-fueled microturbines are being considered as part of the future green microgrid. However, the use of hydrogen as a fuel presents new challenges for selection and development of suitable high temperature materials for hydrogen combustion. The burning of hydrogen is expected to result in higher operating temperatures and higher than typically observed water vapor contents in exhaust gases than after burning natural gas. In the present work, foil specimens of various Fe- and Ni-based alloys were oxidized in air + 10vol.% H2O and air + 60vol.% H2O for up to 5,000 h at 700 °C to simulate the exhaust atmosphere of natural gas and hydrogen-fueled microturbines. The impact of alloy composition and water vapor content on the oxidation/ volatilization induced loss of wall thickness was experimentally evaluated. Enhanced external oxidation and volatilization of Cr¬2O3 and Ti-doped Cr2O3 scales was observed in 60 % H2O compared to 10% H2O. No significant impact of the higher water vapor content was observed on Al2O3 scales formed on Fe-based alumina forming alloys. Lifetime modeling was employed to predict the combined effects of water vapor content, gas flow rates, temperature and alloy composition on the oxidation-induced lifetime of the investigated materials

Romedenne, Marie↗
DOE OSTI2020

Consistency and reproducibility in atomic layer deposition

Atomic layer deposition (ALD) is a thin film synthesis technique that can provide exquisite accuracy and precision in film thickness and composition even on complex, large area substrates. Based on self-limiting surface chemistry, ALD can be insensitive to process conditions and reactor designs, allowing an ALD process developed in one lab to be easily reproduced in other labs. In practice, however, ALD is sometimes difficult to reproduce or replicate, and the results can vary substantially between ALD reactors and between labs. This is exemplified by large deviations in reports on the growth of, e.g., Al2O3, FeOx, and TiO2 given the same precursors under similar conditions. Furthermore, the problem of irreproducibility seems to be growing as ALD is adopted by more researchers and integrated into new applications. In this article, the authors highlight some of the major sources of variations and errors and common misconceptions related to ALD. In particular, the authors focus on issues related to precursors, substrates, and deposition tools. The authors illustrate these problems through examples from the literature, and they present results from numerical simulations that describe how nonidealities would manifest in thickness profiles in a typical cross-flow reactor. They also describe how reproducibility in ALD is linked to consistent experimental practice and reporting between labs. The authors’ hope is that by educating newcomers to ALD and advocating for consistent reporting of deposition conditions, they can minimize irreproducibility and enable ALD practitioners to realize the full potential afforded by self-limiting surface chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Spatial Atomic Layer Deposition to Scale Manufacturing of Robust Catalysts for Biomass Conversion Applications: Cooperative Research and Development Final Report, CRADA Number CRD-17-715

This CRADA will facilitate technology maturation for NREL-developed ALD-coated catalyst materials that are tailored for durability during harsh biomass conversion chemistries. This project will address optimizing process parameters for scale-up of Al2O3 ALD-coated catalysts, demonstrating ALD-coated catalyst performance for muconic acid hydrogenation, and validating economic models that project significant cost benefits for ALD-enhanced catalytic processes. This work will strengthen private-public partnerships in the area of advanced catalyst manufacturing for energy-related technology. Critical information will be collected to elevate the Technology Readiness Level and increase our competitiveness for cooperative R&D agreements and licensing. Success of this work will be crosscutting as it can facilitate advanced catalyst development for both renewable and conventional processes.

09 BIOMASS FUELS↗
DOE OSTI2021

Validation and Verification for INL Modelica-based TEDS models Via Experimental Results

This report provides an overview on the verification and validation (V&V) of the Thermal Energy Distribution System (TEDS) model developed in the Modelica process modeling ecosystem using experimental data. Model development has led to the creation of a dynamic process model of the experimental TEDS facility housed within the Energy Systems Laboratory (ESL) at Idaho National Laboratory (INL). The model was then used during the preconstruction phase of the experimental effort to inform experimental design (e.g., insulation requirements, bypass line placement, expected performance of components) and to test innovative control schemes prior to the initial operation. The TEDS model developed in Modelica includes the primary components of the TEDS experimental unit: a 200kW Chromalox heater; a single-tank packed-bed thermal energy storage system filled with 0.125-inch alumina (Al2O3) beads; an ethylene-glycol-to-Therminol-66 heat exchanger; system piping; five control valves; and all associated temperature, pressure, and volumetric flow sensors. Using the Institute of Electrical and Electronics Engineers (IEEE) V&V methodologies, considered the gold standard in the engineering field, the model was verified using a combination of static analysis, spatial convergence, and regression tests. Then using dynamic time warping (DTW) initial runs to validate and tune the TEDS model versus the experiment were conducted. This tuning method was accomplished using the INL Risk Analysis Virtual ENvironment (RAVEN) software package. Tuning is required to account for physical phenomena that are less understood within the empirical heat transfer correlations. Through the commencement of this work, a systems-level model of TEDS with associated control systems, sensors, piping diameters, and component capabilities has been created. This model was utilized in the pre-experimental phase to inform system design, insulation thicknesses, and potential control schemes to operate the system effectively and safely. Then, initial experimental startup and operational data were used to demonstrate the validation and tuning methodology. This process demonstrates the classical two-step approach of a model informing experimental design followed by the experiment validation and tuning the model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Design, Deployment, and Characterization of the World’s First Flexible Large Power Transformer

GE Research and its partner Prolec GE have designed, built and deployed in the field the world’s first flexible power transformer. The flexible power transformer is a transmission class 3-phase autotransformer configurable in impedance and in voltage which allows it to serve as a universal spare for multiple units in a given fleet. However, the key innovation in this new concept is the online adjustable leakage impedance which allows the transformer to change its impedance without interrupting the transmission line operation. The flexible power transformer can be designed with up to three low voltage transmission class ratings and up to 12 impedance values changeable both online and offline. This report provides an overview of the design, manufacturing, testing, and commissioning of the 165kV, 60MVA prototype built including the results of the field performance validation tests. The prototype was specified in collaboration with Cooperative Energy, the utility host. It was designed and tested in the factory according to IEEE standard C57.12.00 and followed all protocols for transportation, installation, and commissioning of a power transformer. In addition to the prototype, a flexible protection system capable of automatically adjusting its settings upon the transformer impedance was also developed and deployed in the for testing and validation. On September 3, 2021 the prototype was energized in Cooperative Energy’s substation in Columbia, Mississippi to become the world’s first flexible power transformer in operation. Its performances and impact on the grid operation were demonstrated through different field tests. Results obtained confirm that the impedance of the flexible transformer can be varied under load through its full range, from 4.3% to 9.3%, without adverse impacts on the line operation, the protection system, the transformer stability and health condition. Results also proved that the flexible transformer is very effective in controlling power transfer through the line or load sharing between units operating in parallel. Indeed, it was proven that higher impedances decrease the thruput power of the transformer while lower impedances increase it. Up to 26MW was controllable on a line loading of 45MVA. It was also possible to demonstrate that the variation of the transformer impedance has no effect on the circulating current between units in parallel, except a minor transient during the impedance change. It was also proven that the flexible protection relay can update its protection settings automatically when the impedance change was detected. The prototype has operated continuously for more than 12 months now with a peak load exceeding 50MVA corresponding to >80% of its ONAN power rating. No alarm, trip or sign of failure has been reported by the utility. In addition to the development and deployment of the flexible transformer prototype, investigations were carried out on new nanodielectric fluids to replace the mineral oil used in power transformers with the goal of reducing their footprint and weight. The key parameters that were targeted for improvement included the breakdown voltage to reduce clearances between windings and tank hence the footprint; viscosity and thermal conductivity to increase the cooling efficiency and therefore to reduce the winding material. Several nanodielectric mixtures with mineral oil including with alumina (Al2O3), titania (TiO2) and Borum Nitrate (BN) with different surfactants have been analyzed and tested. Unfortunately, despite encouraging results no nanofluid candidate has been found viable to replace mineral oil. With the formulations tested, breakdown voltages are generally similar to mineral oil at lower particle contents and worse at higher particle contents. Viscosity appreciably increased at particles concertation over 2 wt% and thermal conductivity increased slightly at 5wt% and appears to be 10-15% higher at 10 wt% particle content. It is recommended to continue investigations to find solutions that can help increase the power density of future flexible power transformers. Flexible power transformers can significantly help the future power grid by providing more flexibility and resiliency. Indeed, by providing voltage and impedance flexibility, flexible power transformers reduce the need for multiple spares, hence inventory costs for utilities. With their online controllable impedance, they can provide support to the grid and help manage short-circuit currents, power flow, line congestion, and grid stability which will become more important with higher penetrations of intermittent renewable resources. During the field validation tests, it was demonstrated that up to 26MW was controllable on a line loading of 45MVA when the transformer impedance was varied from its minimum to its maximum range. Also, with the impedance range, the short-circuit currents could be reduced by up to 38% at the load side of the transformer. With its controllable impedance, flexible transformers can be used in future strategies of grid resilience to help better prepare the grid to face forecasted severe events including storms, heat waves and contingencies. The flexible power transformers can also find role in other applications including high voltage transmission cables such as offshore wind farms where solutions for energizing the cables and managing the reactive power are of critical importance. The designed flexible power transformer is now fully validated and ready for commercialization. Further analysis on the benefits of flexible power transformers for grid stability and short-circuit management including current limiting capability, reclosure and line restoration, control of inrush current, sizing of flexible AC components (FACTS) would help its rapid adoption by the industry.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Alkaline Modified Solid Oxide Catalysts for Condensation Reactions between Biomolecules

The coupling of oxygenates derived from biomass is critical to the production of sustainable commodity chemicals. However, most current industrial oxygenate condensation processes rely on highly corrosive homogenous basic catalysts. To find greener alternatives, several condensation reactions were screened using a variety of alkaline-doped MgO and MgO-Al2O3 heterogenous catalysts. These include i) the self-condensation of hexanedione to methylcyclopentenone, ii) the self-condensation of methyl ethyl ketone to form C8 or C12 ketones, and iii) the coupling of dimethyl succinate and benzaldehyde. We demonstrate substantial yields for several condensation reactions that typically require homogenous base catalysts

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Diagnosing and overcoming recombination and resistive losses in non-silicon solar cells using a silicon-inspired characterization platform

This project aimed to generate the characterization tools needed for accurate and systematic loss analysis in non-silicon photovoltaic solar cell technologies and, through the use of these tools and analysis techniques, contribute to the development of a novel class of hetero-contacts to II-VI absorbers, with the final goal of demonstrating record-breaking CdSeTe devices. CdSeTe solar cells provide a prime example of the potential impact of the techniques we proposed to develop and implement: record poly-CdSeTe cells have bandgap-voltage deficits (W oc ) of approximately 550 mV, as compared with below 400 mV for all other mature PV technologies. Similarly, these record CdSeTe devices have FFs below 80%, when other mature cells are near or above 85%. Frustratingly, a systematic identification of the origin of these sub-par performances—for example recombination or resistive losses—has been lacking, thus slowing down the development of these technologies. Similarly, it is often asserted that CdSeTe cells need a better back (hole) contact. Although most believe this is true, no one knew—at the start of this project—how high the V oc and FF could be for a given cell if it had a perfect back contact. Such characterization techniques and loss analysis methods exist and are routinely performed on c-Si solar cells (e.g. injection-dependent lifetime, Suns-V oc , transfer length method, etc). Over the years, they have been instrumental in the development of silicon devices that operate at 91% of their theoretical (Auger) limit. Lifetime testing, and the associated reconstruction of the implied-J-V curve, can moreover be performed at every cell-processing step, thus allowing a direct peek into the impact of that step on cell performance. Therefore, adapting these techniques and tools to non-Si devices would greatly improve their learning rate. In this project, we developed a Suns-ERE technique—the equipment, methodology, and know-how—to measure the implied-J-V curve, the pseudo-J-V curve, and the actual J-V curve of a thin-film solar cell, allowing an accurate assessment of the quality of the bulk material and its surface passivation, the selectivity of the contact, and its resistivity. We used this technique to show that the absorber of present CdSeTe solar cells is capable of achieving 1 V Voc,, that passivation layers exist (e.g., Al2O3) that can support such high voltages, and that the barrier is identifying contact layers that are both passivating and carrier-selective. The characterization platform created in this project and the understanding generated using it will accelerate the progress of non-silicon PV technologies. In particular, the project will contribute to CdSeTe solar cells with Voc > 1 V and cell efficiency > 24%. Such cells provide a pathway to module-level efficiencies >23%. As CdSeTe presently competes with silicon on module cost (in $\$ $/W) and yet has significantly more room for efficiency gains, the potential for LCOE reduction is particularly large. For example, CdTe modules with an efficiency of 21% would allow an LCOE below $\$ $0.04kWh -1 in average US climates.

14 SOLAR ENERGY↗
DOE OSTI2024

Report on use of Inoculants in Missile Application Alloys

This report documents the status of current inoculant research relevant to missile application alloys and MTCR control language. The information is intended to provide data on current inoculants for us determining the current state of development and identifying potential research directions. Although there has been significant scientific research into the development and synthesis of inoculants, their current availability is limited is traditional powder inoculants employed during casting processes. However, research continues the development of complex oxides, ribbon materials, high entropy alloys, and other inoculant product forms, including the use of inoculants in the melt pools produced during additive manufacturing. Research to date has focused primarily on aluminum and steel alloys with emphasis on refining grain structures and evolving equiaxed morphologies while increasing strength and castability. The primary inoculants in steel and cast irons include TiN, SiC, FeSi75, and Ce which have increased strength properties. Chief inoculants for Al alloys often include TiC, SiC, Al3Sc(x) and TiB2 to aid in precipitation and refinement. Ti and Ni alloys have fewer research activities involving inoculants, although TiN, TiB, ZrN and LaB6 (for Ti alloys) and WC, Co3FeNb2, and CrFeNb (for Ni alloys) have been used. Sic, Al2O3, Mg and Ti are key inoculants for Mg alloys. Multiple cast alloys from each of the material classes demonstrated increased strength and performance properties using inoculants, with several approaching requirements applicable to missile service environments. The continued evolution of advanced manufacturing capabilities is making it easier to produce high temperature near net shape structural materials using inoculant powders. These shapes may include the geometric shapes addressed within the MTCR (tubes and limited wall thicknesses). The use of inoculants may enable further development of high temperature alloys into near net shapes traditionally produced via casting processes due to limited ductility. This may decrease material and manufacturing costs. In addition, inoculation provides controlled kinetics and achievable chemical segregation that enables potential for far-from equilibrium thermodynamic microstructures and chemistries that could provide new metastable alloy states and subsequent properties to address co-design engineering constraints, including needs for increased strength and ductility. It is recommended that specific material combinations within these alloy classes be carefully watched as the materials evolve, with controls aimed at those having material properties above current MTCR levels. This specifically includes the use of refractory inoculants in alloys, and the application of inoculants in high strength and high temperature alloys via additive manufacturing processes, with care to link capabilities to product forms similar to the current requirements on tube geometries and material feed stocks. The continued development of nanoparticle inoculants will increase strength and ductility of high strength castings and additive manufactured metallic components. For example, adding inoculants into the casting of maraging steels and other precipitation strengthened alloys may drastically elevate mechanical properties above the control limit of current regulations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of Support on Iron-Based Catalyst Toward CO2-Free H2 Production From Methane Pyrolysis

The global demand for low-emission hydrogen production is increasing rapidly due to the potential for hydrogen to substitute conventional fossil fuels in energy-related applications. Among practical technologies such as steam reforming of methane (SMR), water electrolysis, and methane pyrolysis, methane pyrolysis has the most potential to produce economical- and near-zero-emission hydrogen. The reaction during methane pyrolysis produces a solid carbon by-product that can be monetized to offset production costs. However, this route is not without research challenges, and the selective formation of high-value carbon remains a critical issue. Supported nickel, iron, and cobalt, have been widely investigated for methane pyrolysis. Although iron-based catalysts are less active than Ni, iron catalysts offer less resistance to coke formation, are inexpensive, and have a longer lifetime. One area not sufficiently explored is the effect of support materials other than Al2O3 for the iron-based catalysts. Therefore, we investigated a detailed variation of support materials to study their influence on the catalytic performance. Moreover, this study offers a fair and direct comparison among all catalytic materials which were synthesized and studied under identical conditions. This direct comparison of the obtained results is important because results reported in different publications are often not comparable due to very different reaction conditions.

Gull, Nathan↗
DOE OSTI2024

Study of Mechanical Grinding Effects on Niobium Surface

Mechanical grinding is commonly employed to eliminate surface defects such as scratches and pits from niobium cavity surfaces or sheets before cavity fabrication. Subsequently, chemically buffered polishing or electropolishing is often utilized to completely remove residues of the polishing media and any defects induced by mechanical grinding, ensuring a pristine surface. In this study, we conducted a systematic investigation to assess the influence of mechanical grinding using silicon carbide (SiC) and aluminium oxide (Al2O3) polishing media on niobium surfaces. Additionally, the study examines the effects of post-mechanical grinding chemical treatments on surface quality.

Chouhan, V.↗
DOE OSTI2024

Effect of Support on Iron-Based Catalyst Toward CO2-Free H2 Production From Methane Pyrolysis

The global demand for low-emission hydrogen production is increasing rapidly due to the potential for hydrogen to substitute conventional fossil fuels in energy related applications. Among all the current practical technologies – Steam Reforming of Methane (SMR), Water Electrolysis, and Methane Pyrolysis – methane pyrolysis has the potential to produce economical- and near-zero-emission hydrogen because the reaction produces a solid carbon by-product that can be monetized to offset production costs. However, this route is not without research challenges, and the selective formation of high-value carbon remains a critical issue. Supported nickel, iron, and cobalt, have been widely investigated for methane pyrolysis. Although iron-based catalysts are less active than Ni, iron catalysts offer less resistance to coke formation, are inexpensive, and have a longer lifetime. One area not sufficiently explored is the effect of support materials other than Al2O3 for the iron-based catalysts. Therefore, in this study we investigated a detailed variation of support material to study their influence on the catalytic performance. Moreover, this study offers a fair comparison because all catalytic materials were synthesized and studied under identical conditions, allowing a direct comparison of the obtained results; this is important because results reported in different publications in literature are often not comparable, due to very different reaction conditions.

Aireddy, Divakar Reddy↗