Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “decoding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Hexagonal uniformly redundant arrays for coded-aperture imaging

Uniformly redundant arrays are used in coded-aperture imaging, a technique for forming images without mirrors or lenses. This technique is especially important for the high energy X-ray and gamma-ray region above 20 kev. In this technique, a mask consisting of opaque (closed) and trasparent (open) areas is placed between the photon sources to be imaged and a position sensitive detector or a detector array. Each source casts a shadow pattern of the mask or aperture onto the detector. This shadow pattern may be viewed as an encoded signal for that source direction. If each possible source code is unique, the detected composite of overlapping shadow patterns may be decoded to produce an image of the source distribution.

Finger, M. H.↗

Cosmic rays 10Be biennal data and their relationship to aurorae and sunspots

The galactic cosmic ray (C.R.) variations which should give information on three dimensional aspects of the heliospheric magnetic fields and on the solar wind, which modulate their influx into the Solar System were studied. In order to decode the information from the C.R. series it is necessary to know the mechanisms through which the modulation is produced. It it clear that a balance of effects with sources at different heliospheric latitudes results in the modulated C.R. intensity. It is found that the modulation of 10Be in polar ice may be due to at least two main contributions: (1) negative and in phase with the Solar flare activity modulating the cosmic ray flux in Forbush-type decreases, and (2) positive in phase with the appearance of large wind streams situated at both polar coronal holes. It is found that the high heliolatitude activity is related to a stable periodicity of 11.1y whereas the low heliolatitude activity contributes to the wondering of the solar cycles.

Attolini, M. R.↗

Landsat-4 on-board ephemeris determination utilizing the Global Positioning System

The Global Positioning System (GPS) is a worldwide system of navigation data satellites currently being deployed by the United States for land, sea, air and space-borne users. Currently several development satellites have been launched for system evaluation. Eventually the system will include 18 operational satellites. The GPS system utilizes precision clocks to allow users to measure the one-way propagation delay of navigational signals from the satellites, so that users can infer their position by decoding the navigation signal and observing the delay from several satellites. Landsat-4 is the first spacecraft to carry a GPS navigation system into orbit. This paper describes the Landsat-4 GPS experiment, Landsat-4 requirements for ephemeris data and the in-flight performance of the system.

Korenstein, D. A.↗

New short constraint length, rate 1/N convolutional codes which minimize the required SNR for given desired bit error rates

It is pointed out that for a convolutional coding system, the Bit Error Rate (BER) at the Viterbi decoder output is upper-bounded by the transfer function bound. A large number of rate 1/N convolutional codes have been reported. The criteria used for determining the quality of a code in code search procedures, however, may not be very suited for cases in which the required BER is in the moderate range. For this reason, it may be best to select the code with the aim to minimize the required SNR for a given disired BER. Partial code searching techniques are presented, and a table listing the code search results is provided.

Lee, P. J.↗

Four-dimensional modulation and coding - An alternate to frequency-reuse

Four dimensional modulation as a means of improving communication efficiency on the band-limited Gaussian channel, with the four dimensions of signal space constituted by phase orthogonal carriers (cos omega sub c t and sin omega sub c t) simultaneously on space orthogonal electromagnetic waves are discussed. 'Frequency reuse' techniques use such polarization orthogonality to reuse the same frequency slot, but the modulation is not treated as four dimensional, rather a product of two-D modulations, e.g., QPSK. It is well known that, higher dimensionality signalling affords possible improvements in the power bandwidth sense. Four-D modulations based upon subsets of lattice-packings in four-D, which afford simplification of encoding and decoding are described. Sets of up to 1024 signals are constructed in four-D, providing a (Nyquist) spectral efficiency of up to 10 bps/Hz. Energy gains over the reuse technique are in the one to three dB range t equal bandwidth.

Wilson, S. G.↗

A minimal living system and the origin of a protocell

The essential molecular attributes of a minimal living system are discussed, and the evolution of a protocell from such a system is considered. Present thought on the emergence and evolution of life is summarized, and the complexity of biological systems is reviewed. The five fundamental molecular attributes considered are: informational molecules, catalytic peptides, a decoding and translation system, protoribosomes, and protomembranes. Their functions in a primitive cell are discussed. Positive feedback interaction between proto-RNA, proto-AA-tRNA, and protoenzyme are identified as the three major steps to the formation of a primitive living cell.

Oro, J.↗

VLSI Architectures for Computing DFT's

Simplifications result from use of residue Fermat number systems. System of finite arithmetic over residue Fermat number systems enables calculation of discrete Fourier transform (DFT) of series of complex numbers with reduced number of multiplications. Computer architectures based on approach suitable for design of very-large-scale integrated (VLSI) circuits for computing DFT's. General approach not limited to DFT's; Applicable to decoding of error-correcting codes and other transform calculations. System readily implemented in VLSI.

Truong, T. K.↗

A cascaded coding scheme for error control

A cascaded coding scheme for error control was investigated. The scheme employs a combination of hard and soft decisions in decoding. Error performance is analyzed. If the inner and outer codes are chosen properly, extremely high reliability can be attained even for a high channel bit-error-rate. Some example schemes are studied which seem to be quite suitable for satellite down-link error control.

Kasami, T.↗

A VLSI single chip 8-bit finite field multiplier

A Very Large Scale Integration (VLSI) architecture and layout for an 8-bit finite field multiplier is described. The algorithm used in this design was developed by Massey and Omura. A normal basis representation of finite field elements is used to reduce the multiplication complexity. It is shown that a drastic improvement was achieved in this design. This multiplier will be used intensively in the implementation of an 8-bit Reed-Solomon decoder and in many other related projects.

Deutsch, L. J.↗

Error and erasure probabilities for Galileo uplink code

The Galileo uplink Frame Erasure probability and Undetected Frame Error probability are derived. The performance meets desired specification under normal operations. The Galileo command system will work well even in an emergency condition, where the bit error rate into the command decoder is 1.00 X 0.001 (although Galileo's command threshold error rate is 1.00 X 0.00001).

Berner, J. B.↗

A cascaded coding scheme for error control

A cascade coding scheme for error control is investigated. The scheme employs a combination of hard and soft decisions in decoding. Error performance is analyzed. If the inner and outer codes are chosen properly, extremely high reliability can be attained even for a high channel bit-error-rate. Some example schemes are evaluated. They seem to be quite suitable for satellite down-link error control.

Shu, L.↗

Viterbi algorithm on a hypercube: Concurrent formulation

The similarity between the Fast Fourier Transform and the Viterbi algorithm is exploited to develop a Concurrent Viterbi Algorithm suitable for a multiprocessor system interconnected as a hypercube. The proposed algorithm can efficiently decode large constraint length convolutional codes, using different degrees of parallelism, and is attractive for VLSI implementation.

Pllara, F.↗

Maximum likelihood estimation of signal-to-noise ratio and combiner weight

An algorithm for estimating signal to noise ratio and combiner weight parameters for a discrete time series is presented. The algorithm is based upon the joint maximum likelihood estimate of the signal and noise power. The discrete-time series are the sufficient statistics obtained after matched filtering of a biphase modulated signal in additive white Gaussian noise, before maximum likelihood decoding is performed.

Kalson, S.↗

A VLSI pipeline design of a fast prime factor DFT on a finite field

A conventional prime factor discrete Fourier transform (DFT) algorithm is used to realize a discrete Fourier-like transform on the finite field, GF(q sub n). A pipeline structure is used to implement this prime factor DFT over GF(q sub n). This algorithm is developed to compute cyclic convolutions of complex numbers and to decode Reed-Solomon codes. Such a pipeline fast prime factor DFT algorithm over GF(q sub n) is regular, simple, expandable, and naturally suitable for VLSI implementation. An example illustrating the pipeline aspect of a 30-point transform over GF(q sub n) is presented.

Truong, T. K.↗

The Venus Balloon Project

On June 11 and 15, 1985, two instrumental balloons were released from the Soviet VEGA 1 and VEGA 2 spacecraft and deployed in the atmosphere of Venus. The VEGA probes flew by the planet on their way to a rendezvous with comet Halley in March 1986. Drifting with the wind at altitudes of 54 km, the balloons traveled one-third of the way around the planet during their 46-hour lifetimes. Sensors on-board the gondolas made periodic measurements of pressure, temperature, vertical wind velocity, cloud particle density, ambient light level, and frequency of lightning. The data were transmitted to Earth and received at the Deep Space Network (DSN) 64-m stations and at several large antennas in the USSR. Approximately 95 percent of the telemetry data were successfully decoded at the DSN complexes and in the Soviet Union, and were provided to the international science team for analysis. Very Long Baseline Interferometry (VLBI) data were acquired by 20 radio observatories around the world for the purpose of monitoring the Venus winds. The DSN 64-m subnet was part of a 15-station VLBI network organized by the Centre National d'Etudes Spatiales (CNES) of France. In addition, five antennas of the Soviet network participated. VLBI data from the CNES network are currently being processed at the Jet Propulsion Laboratory.

Stelzried, C. T.↗

The Venus Balloon Project telemetry processing

The peculiarities of the Venus Balloon telemetry system required the development of a new methodology for the telemetry processing, since the capabilities of the Deep Space Network (DSN) telemetry system do not include burst processing of short frames with two different bit rates and first bit acquisition. A software package was produced for the non-real time detection, demodulation, and decoding of the telemetry streams obtained from an open loop recording utilizing the DSN spectrum processing subsystem-radio science (DSP-RS). A general description of the resulting software package (DMO-5539-SP) and its adaptability to the real mission's variations is contained.

Urech, J. M.↗

Coding for reliable satellite communications

This research project was set up to study various kinds of coding techniques for error control in satellite and space communications for NASA Goddard Space Flight Center. During the project period, researchers investigated the following areas: (1) decoding of Reed-Solomon codes in terms of dual basis; (2) concatenated and cascaded error control coding schemes for satellite and space communications; (3) use of hybrid coding schemes (error correction and detection incorporated with retransmission) to improve system reliability and throughput in satellite communications; (4) good codes for simultaneous error correction and error detection, and (5) error control techniques for ring and star networks.

Gaarder, N. T.↗

Laser microprobe study of cosmic dust (IDPs) and potential source materials

The study of cosmic dust or interplanetary dust particles (IDP) can provide vital information about primitive materials derived primarily from comets and asteroids along with a small unknown fraction from the nearby interstellar medium. The study of these particles can enhance our understanding of comets along with the decoding of the history of the early solar system. In addition the study of the cosmic dust for IDP particles can assist in the elucidation of the cosmic history of the organogenic elements which are vital to life processes. Studies to date on these particles have shown that they are complex, heterogeneous assemblages of both amorphous and crystalline components. In order to understand the nature of these particles, any analytical measurements must be able to distinguish between the possible sources of these particles. A study was undertaken using a laser microprobe interfaced to a quadrupole mass spectrometer for the analysis of the volatile components present in cosmic dust particles, terrestrial contaminants present in the upper atmosphere, and primitive carbonaceous chondrites. From the study of the volatiles released from the carbonaceous materials it is hoped that one could distinguish between components and sources in the IDP particles analyzed. The technique is briefly described and results for the CI, CM, and CV chondrites and cosmic dust particle W7027B8 are presented.

Gibson, E. K., Jr.↗