Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photoelectron spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Ultra-stable and poison tolerant oxygen evolution activity enabled by surface In 2 O 3- x (OH) y of Co 3 In 2 S 2 large single crystals

Water is an earth-abundant source for clean hydrogen production via electrochemical water electrolysis (WE). However, the surface poisoning that occurs in aqueous electrolytes drastically deactivates the electrocatalytic performance of electrodes. Here, in this study, we report electrochemically formed In 2 O 3-x (OH) y on the surface of a large (1–1.5 mm long, 0.5–0.6 mm wide and 0.3–0.5 mm thick) single crystal of Weyl semimetal Co 3 In 2 S 2 (Co 3 In 2 S 2 /In 2 O 3-x (OH) y ) as an ultra-stable and poison tolerant electrode for the oxygen evolution reaction (OER) in 1 M KOH, addressing a bottleneck in WE. The OER activity of the powder form of Co 3 In 2 S 2 is limited by its aerophilic nature. Remarkably, the single-crystal electrodes maintained their high activity for a continuous operational period of 5 h in 1 M KOH electrolyte with/without 10 mM strong surface-poisoning ligands i.e., potassium cyanide, bipyridine, and ethylenediaminetetraacetate disodium salt. The electrodes exhibited stable OER activity for 1000 h at 100 mA cm -2 (1.73 V vs. RHE). The temperature-dependent OER polarization curves (10–70 °C) unambiguously revealed surface poisoning through the suppression of precatalytic Co-redox peaks on the bipyridine poisoned electrode, which led to the stabilization of surface Co-sites. The X-ray photoelectron spectroscopy analyses of pristine, poisoned and post-electrocatalytic single-crystal Co 3 In 2 S 2 electrodes revealed the existence of an In 2 O 3-x (OH) y surface phase, which could be the potential heterostructure for the origin of ultra-stable and poison tolerant OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

K–Co–Mo–S x chalcogel: high-capacity removal of Pb 2+ and Ag + and the underlying mechanisms

Chalcogenide-based aerogels, known as chalcogels, represent a novel class of nanoparticle-based porous amorphous materials characterized by high surface polarizability and Lewis base properties, exhibiting promising applications in clean energy and separation science. This work presents a K–Co–Mo–S x (KCMS) chalcogel as a highly efficient sorbent for heavy metal ions and details its sorption mechanisms. Its incoherent structure comprises Mo 2 V (S 2 ) 6 and Mo 3 IV S(S 6 ) 2 anion-like clusters with four- and six-coordinated Co–S polyhedra, forming a Co–Mo–S covalent network that hosts K + ions through electrostatic attraction. The interactions of KCMS with heavy metal ions, particularly Pb 2+ and Ag + , reveal that KCMS is exceptionally effective in removing these ions from ppm concentrations down to trace levels (≤5 ppb). KCMS rapidly removes Ag + (≈81.7%) and Pb 2+ (≈99.5%) within five minutes, achieving >99.9% removal within an hour, with a distribution constant K d ≥10 8 mL g -1 . KCMS exhibits an impressive removal capacity of 1378 mg g -1 for Ag + and 1146 mg g -1 for Pb 2+ , establishing it as one of the most effective materials known to date for heavy metal removal. This material is also effective for the removal of Ag + and Pb 2+ along with Hg 2+ , Ni 2+ , Cu 2+ , and Cd 2+ from various water sources even in the presence of highly concentrated and chemically diverse cations, anions, and organic species. Analysis of the post-interacted KCMS by synchrotron X-ray pair distribution function (PDF), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDS) revealed that the sorption of Pb 2+ , Ag + , and Hg 2+ mainly occurs by the exchange of K + and Co 2+ . Despite being amorphous, this material exhibits unprecedented ion-exchange mechanisms both for the ionically and covalently bound K + and Co 2+ , respectively. In conclusion, this discovery advances our knowledge of amorphous gels and guides material synthesis principles for the highly selective and efficient removal of heavy metal ions from water.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Expanding the Zinc Precursor Toolbox: A Comparative Study of Precursors for Thermal ALD of ZnO Thin Films

Atomic layer deposition (ALD) of zinc oxide (ZnO) has been widely researched using diethyl zinc (DEZ)-based methods. The significant importance of thin films of ZnO as transparent conductive oxides (TCO) in optoelectronic devices and photovoltaics warrants examining alternative Zn precursors for ZnO ALD as potential replacements for the pyrophoric DEZ. In this study, we investigated three alternative Zn precursors: Zn(EEKI)2, Zn(DMP)2, ZnEt(HMDS), in the process development for high-quality ZnO thin films and compared them to DEZ. The ALD processes were studied using in situ spectroscopic ellipsometry. The properties of the ALD ZnO films were characterized using ex situ X-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectrometry and nuclear reaction analysis (RBS/NRA), X-ray diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM), and ultraviolet-visible (UV/Vis) spectrophotometry. These measurements confirmed the formation of pure, stoichiometric, and polycrystalline ZnO films using all four Zn precursors. Although the selected precursors are chemically diverse Zn compounds, they all yielded saturating ALD processes and high-quality ZnO thin films at 200 °C. This study highlights the potential benefits of alternative zinc precursors in designing ALD processes for ZnO thin films.

Obenlüneschloß, Jorit↗
DOE OSTI2025

Electrolytic gold plating, stripping, and ion transport dynamics through a solid-state iodide perovskite

The pronounced electrochemical reactivity between halide perovskites and metal electrodes can introduce mobile extrinsic metal ions which can cause device instability or enable novel functionalities. Here we systematically investigate the kinetics of gold cation (Au + ) migration in indium tin oxide (ITO)/methylammonium lead triiodide (MAPbI 3 )/Au model devices under long-term potentiostatic biasing. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) analyses reveal that Au + ions, electrochemically generated at the Au anode, traverse the perovskite layer with diffusion coefficients on the order of 10 −11 to 10 −10 cm 2 s −1 and are subsequently reduced at the cathode as Au 0 clusters, resembling metal plating behavior in electrolytic cells and solid-state batteries during charging. Furthermore, reversing the applied bias strips the plated Au 0 , revealing reversibility suitable for bipolar resistive switching devices and providing direct evidence of the electrochemical and ionic nature of Au transport within the perovskite matrix. Quantitatively determining diffusion coefficients and ion concentrations provides foundational inputs for future drift-diffusion modelling opportunities and allows us to relate our findings to implications on long term operation of devices like photovoltaic modules. These results clearly demonstrate the solid-state electrochemical nature of perovskite devices, highlight methods to be more quantitative about ion transport properties, provide and emphasize the importance of disentangling electro-, photo-, photoelectrochemical processes for understanding device performance and unlocking new functionalities.

14 SOLAR ENERGY↗
DOE OSTI2025

Critical role of oxide anchoring groups in organic electron transport layers for perovskite solar cell stability

Charge transport layers (CTLs) play a critical role in the performance and long-term stability of perovskite solar cells (PSCs) by facilitating efficient charge extraction and providing interfacial stabilization. For organic CTLs, different functional groups have been designed to modulate the interactions with the substrate. Anchoring groups are used to establish strong adhesion to transparent conductive oxides (TCOs) but are not routinely incorporated in organic CTL design. In this study, we investigate the influence of anchoring groups in organic electron transport layers (ETLs) on PSC performance and stability by synthesizing and evaluating two naphthalene diimide (NDI)-based ETLs: NDI-(PhPA) 2 , functionalized with polar phenyl phosphonic acid (PhPA) groups, and NDI-(PhBr) 2 , modified with nonpolar bromophenyl (PhBr) groups. X-ray photoelectron spectroscopy confirms that PhPA functionalization leads to NDIs anchored onto fluorine-doped tin oxide (FTO) following chemical bath deposition, while NDI-(PhBr) 2 shows no detectable surface presence after deposition. We show that NDI-(PhPA) 2 deposits as a thin film on FTO, exhibiting strong adhesion, high solvent resistance, and enhanced light and thermal stability, achieving a maximum device efficiency of 14.3%. Stability assessments conducted under continuous illumination at 25 °C for 200 hours and at 65 °C for 100 hours demonstrate performance on par with TiO 2 -based ETLs. In contrast, NDI-(PhBr) 2 , which lacks strong anchoring interactions, fails to adhere to the FTO surface, resulting in a rapid decrease in efficiency over a few hours, comparable to devices without an ETL. These findings highlight the importance of anchoring groups in organic CTLs for achieving long-term PSC stability under operational conditions.

Kim, Sanggyun [Georgia Institute of Technology, At↗
DOE OSTI2025

Elucidating the reversible exsolution–dissolution behaviour of high-entropy oxides in crystalline and amorphous phases

High-entropy oxides (HEOs), as a subclass of high-entropy materials (HEMs), offer a versatile platform for catalysis by leveraging entropy-stabilized solid solutions with tunable compositions, lattice structures, and electronic properties. While exsolution–dissolution of metal species in crystalline HEOs has emerged as a promising strategy for reversible active sites regeneration, the dynamic behaviour of HEOs possessing amorphous nature remains under-explored, particularly the difference with crystalline counterparts. In this work, we systematically investigate the architecture-dependent exsolution–dissolution behavior of HEOs by comparing a crystalline-phase HEO (c-HEO) and an amorphous-phase HEO (a-HEO), both comprising Ni, Mg, Cu, Zn, and Co as principal metal elements. Using a combination of in situ variable-temperature X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), electron microscopy, and in situ CO diffuse reflectance infrared Fourier transform spectroscopy (CO-DRIFTS), the structural evolution of the two HEO phases under redox conditions was elucidated. Both materials exhibit reversible exsolution of metallic species or alloys in reducing environments, followed by re-incorporation into the host lattice upon oxidation. Remarkably, the a-HEO demonstrates more facile and dynamic self-healing behavior, with alloy exsolution and dissolution occurring under milder conditions because of its enhanced reducibility and structural disorder. This study provides critical insights into the design of next-generation regenerable catalysts based on amorphous HEOs, highlighting the role of phase structure in governing reversible metal-site formation dynamics and catalytic performance.

Wang, Qingju [Univ. of Tennessee, Knoxville, TN (U↗
DOE OSTI2025

Layer-by-layer growth of graphene oxide multilayers using robust interlayer linking chemistry. 1. Zr-bisphosphates

Graphene oxide (GO) holds substantial interest because of its utility in applications ranging from chemical sensing to catalysis and energy storage. We report on the layer-by-layer formation of graphene oxide phosphate (P-GO) multilayers on silica and oxidized silicon supports, with the layers connected via Zr-bisphosphate (ZP) linking chemistry. Layers were grown either directly by ZP linkages between P-GO sheets, or with the use of 1,4-phenylene bisphosphate (BP1) or [1,1′-biphenyl]4,4′-diyl bisphosphate (BP2). The layers have been characterized using optical null ellipsometry, X-ray photoelectron spectroscopy (XPS), UV-visible absorption spectroscopy and scanning electron microscopy (SEM). There is a linear dependence of assembly thickness on the number of layers deposited and the integrated area of the optical absorbance bands also increases linearly with number of layers deposited. XPS data provides information on interlayer linking stoichiometry. SEM images provide insight into the morphology of the adlayers, suggesting the structure and length of the interlayer linking moieties used in the multilayer assembly play a significant role in the organization of the resulting system.

Mukherjee, Neelanjana [Michigan State University, ↗
DOE OSTI2025

Layer-by-layer growth of graphene oxide multilayers using robust interlayer linking chemistry. 2 Zr–bissulfates

We report on the facile layer-by-layer growth of graphene oxide sulfate (GO-S) multilayer structures. The layers are bonded to a modified planar silica support using Zr 4+ ions. Optical ellipsometry shows step-by-step layer growth with layer thickness consistent with that expected from molecular mechanics calculations. The reaction to form Zr–bissulfate linkages is facile, with multistep layer deposition occurring within six to ten minutes per layer. The GO-S layers can be deposited directly on GO-S underlayer(s) or interlayer spacers can be incorporated to control the spacing with GO-S layers. X-ray photoelectron spectroscopy (XPS) data provides information on the density of the sulfonated groups present at the graphene oxide surface and on the Zr : S ratio. This is the first report we are aware of that demonstrates robust layer-by-layer growth of graphene oxide structures.

Graphene oxide↗
DOE OSTI2025

Investigation of electrode passivation during oxidation of a nitroxide radical relevant for flow battery applications

Nitroxide-radicals such as 2,2,6,6-tetramethylpiperidin-1-oxyl (TEMPO) and their derivatives have gained interest as redox-active organic molecules for applications in grid-scale energy storage. In particular, the higher solubility of 4-hydroxy-TEMPO in aqueous media greatly improves its energy density, but unusual kinetics associated with its surface-mediated electrooxidation have limited further development. Here, the apparent passivation behavior of species formed during 4-hydroxy-TEMPO electrooxidation in concentrated electrolytes is investigated. A combination of surface microscopy, X-ray photoelectron spectroscopy, and quartz-crystal gravimetry confirms the formation of a polymeric-type layer over the electrode surface composed of 4-hydroxy-TEMPO-like subunits, which is otherwise not observed with TEMPO. This study indicates that the design of high energy density and stable TEMPO-based redox molecules must also consider the reactivity that may occur due to the molecular characteristics of solubility-enhancing moieties. It is found that the extent of passivation is dependent on the voltage scan rate and 4-hydroxy-TEMPO concentration, underscoring the importance of studying materials at conditions relevant for their proposed applications. Evidence of incomplete passivation and an electrode self-cleaning process is presented, suggesting a materials design strategy to mitigate surface passivation from side reactions that may occur in redox active materials for energy storage applications.

Buchanan, Cailin [Argonne National Laboratory (ANL↗
DOE OSTI2025

Operando APXPS for direct probing of Li ion battery LCO electrode/electrolyte interface chemistry during lithiation/delithiation

The real-time interface chemistry between the lithium cobalt oxide (LCO) working electrode and the LiClO 4 /propylene carbonate (PC) electrolyte is investigated during lithiation/delithiation using dip-and-pull ambient pressure photoelectron spectroscopy (APXPS). The APXPS results appear to exhibit the seldom discussed Co 2+ state in the LCO structure, where the operando measurements indicate electron transfer among Co 2+ , Co 3+ , and Co 4+ states. Specifically, the lithiation of LCO reduces the Co 4+ state to both Co 3+ and Co 2+ states, where, as a function of voltage, reduction to the Co 2+ state is initially more pronounced followed by Co 3+ formation. In addition, a delay in surface delithiation is observed during the reverse potential steps. This is discussed in terms of overpotential at the interface measurement position as a consequence of the dip-and-pull setup for this experiment. Finally, the shifts in the apparent binding energies of the spectral features corresponding to the electrolyte and LCO at their interface show that the electrochemical potentials at delithiation voltage steps are different from the lithiation steps at the same applied voltages. This further explains the non-responsive delithiation. The BE shift observed from the LCO surface is argued to be dominantly due to the semi-conductive nature of the sample. Overall, this article shows the importance of operando APXPS for probing non-equilibrium states in battery electrodes for understanding electron transfer in the reactions.

Liu, Qianhui [Uppsala Univ. (Sweden)] (ORCID:00000↗
DOE OSTI2025

Titanium nitride prepared by the urea-glass synthesis gives an active electrocatalyst for the oxygen reduction reaction

Rock-salt-structured titanium nitride (TiN) has emerged as a leading earth-abundant electrocatalyst for the oxygen reduction reaction (ORR). We compare TiN prepared in three ways starting from urea: the urea–glass method, by a direct reaction between urea and titanium(IV) chloride, and through a discrete monomeric complex. In the urea-glass route, a new-found [Ti 4 (µ-O) 6 (OC(NH 2 ) 2 ) 12 ] 4+ oxo-bridged titanium–urea precursor can be synthesized in a single-pot reaction at room temperature starting from titanium(IV) chloride, urea, and ethanol with a urea-to-titanium ratio of 6. Subsequent annealing of the polymeric gel that results at 750 °C in an N 2 atmosphere yields phase-pure, TiN particles on the 100 µm size scale. TiN can be deposited as an ink with PiperlON®anion exchange dispersion onto a glassy carbon rotating disk electrode (RDE), and of the three synthesis methods, the urea-glass method gives the most active ORR catalyst. The onset potential for ORR activity is −131 mV vs. Hg/HgO, and Koutecký–Levich analysis of linear-sweep voltammetry recorded at varying rotation rates supports a two-electron reduction pathway to H 2 O 2 , with a rate constant of 0.0172 cm s −1 . The higher activity is ascribed to a more oxygen-rich surface—boh defect sites and active oxygen species—afforeded by the oxo-bridged precursor, corrorborated by X-ray photoelectron spectroscopy (XPS) analysis.

Xie, Wanrui [University of Michigan, Ann Arbor, MI↗
DOE OSTI2025

Elucidating the geometric and electronic structure of a fully sulfided analog of an Anderson polyoxomolybdate cluster

The catalytic activity of transition metal sulfide (TMS) clusters in small molecule activation, redox transformations, and charge transfer has inspired the design of novel TMS-based materials for energy-related catalysis and chemical applications. Polyoxometalates (POMs), known for their structural diversity, can in principle be transformed into TMS clusters; however, fully sulfided analogs are rarely isolated, likely due to the strong tendency of uncapped TMS clusters to agglomerate. Here, we report the geometric and electronic structure of a capping ligand-free fully sulfided analog of heptamolybdate Anderson POM [Mo VI 7 O 24 ] 6− , synthesized through the sulfidation of a nanoconfined POM secured within a porous Zr-metal organic framework (NU-1000). A combined computational and experimental analysis indicates that the sulfided counterpart of the Anderson POM is geometrically and electronically more sophisticated than the parent POM. Comparison of experimental pair distribution function (PDF) data with computational simulations confirms that, unlike the oxygen-only [Mo VI 7 O 24 ] 6− cluster, the [Mo IV 7 (μ 3 -S) 6 (μ 2 -SH) 6 (S 2 ) 6 ] 2− polythiometalate (PTM) exhibits diverse sulfur anions (S 2− , HS − , S 2 2− ). DFT calculations indicate that H 2 S acts as a reducing agent, and together with terminal disulfide (S 2 2− ) ligands in the PTM structure, facilitates the complete reduction of all seven Mo VI centers in the parent POM to Mo IV . These findings are supported by X-ray photoelectron spectroscopy (XPS), which confirms exclusive Mo IV , and elemental analysis, which shows quantitative sulfur incorporation. Difference envelope density (DED) mapping further reveals that the PTM clusters are spatially confined within the MOF pores, preventing agglomeration and preserving molecular integrity.

Rabbani, S. M. Gulam [The Ohio State University, C↗
DOE OSTI2026

Ammonolysis with N 2 -diluted NH 3 suppresses Ta( IV ) defects in BaTaO 2 N and enhances photocatalytic water oxidation

BaTaO 2 N stands out among oxynitride photocatalysts because of its ability to capture visible light and to drive the photoelectrochemical water oxidation reaction. However, its solar energy conversion performance is limited by electron–hole recombination at Ta( IV ) defects in the material. These defects are formed by overreduction of the Ta(v) oxide precursor by excess ammonia under the high temperature conditions during ammonolysis. Here we show for the first time that Ta( IV ) defect concentrations can be lowered by conducting the ammonolysis reaction in mixed NH 3 /N 2 gas. The obtained BaTaO 2 N samples crystallize in the cubic CaTiO 3 structure type and form 200–300 nm faceted nanocrystals, based on X-ray diffraction, scanning electron microscopy, and HRTEM. Electron paramagnetic resonance spectra observe the Ta( IV ) defects at g = 1.999 and confirm an 11-fold reduction for the product synthesized in mixed (0.13 : 1.0 vol) NH 3 /N 2 gas, equivalent to 1.14 × 10 16 cm −3 Ta( IV ) ions. This optimized BaTaO 2 N has nearly twice the photocatalytic oxygen evolution activity (AQE of 6.78% at 400 nm) of a reference material made with 1.0 atm ammonia and 78% higher photoelectrochemical water oxidation photocurrent (0.9 mA cm −2 at 1.23 V vs. RHE) under simulated sunlight. According to X-ray photoelectron spectroscopy, remaining Ta( IV ) defects are concentrated in the surface region of the BaTaO 2 N particles, where >50% of all Ta ions are found in the +4 oxidation state. This surface Ta( IV ) population can be directly observed in Vibrating Kelvin Probe Surface Photovoltage Spectra (VK-SPV) via its 1.2–1.4 eV photovoltage onset. Here, it suggests that the surface Ta( IV ) ions contribute empty d-states 0.5–0.7 eV below the BaTaO 2 N conduction band edge. These findings highlight how the energetics and concentrations of Ta( IV ) defects influence the photoelectrochemical water oxidation ability of BaTaO 2 N. Additionally, the work establishes ammonolysis with diluted NH 3 as a new tool to minimize defects in BaTaO 2 N and to raise its solar energy conversion efficiency toward its theoretical limit. Because of its simplicity, the reduced ammonia pressure strategy will likely be applicable to other oxynitrides, which generally suffer from overreduction problems during ammonolysis.

Salmanion, Mahya [University of California, Davis,↗
DOE OSTI2025

Two-step spin-coating of vacancy-ordered double perovskites enables growth of thin films for electronic devices

Vacancy-ordered double perovskites (VODPs), such as Cs 2 TeX 6 (X = Cl, Br, I), are lead-free alternatives to conventional metal-halide perovskites (MHPs). One limitation of VODPs is the lack of processes to form thin films relevant for physical characterization and electronic devices. A two-step spin-coating method was developed for synthesizing high-quality films of Cs 2 TeBr 6 . Independently depositing CsBr and TeBr 4 enables high precursor concentrations and control over crystallization kinetics. By optimizing the spin-coating parameters, conversion of precursors to phase pure films was observed using structural and surface characterization methods. The growth of mixed-halide systems was investigated using alternative salts including CsCl and CsI. The formation of halide alloys was found to depend on the existence of routes to byproducts. Lastly, single carrier diodes of Cs2TeBr6 were designed following valence band characterization with photoelectron spectroscopy. Temperature-dependent space-charge-limited current measurements revealed that transport occurs by hopping and the hole mobility is 3.2 × 10 −5 cm 2 V −1 s −1 near room temperature. As a result, the insights from the 2-step procedure provide a pathway towards making semiconducting devices from VODPs.

Kuklinski, Owen [University of California, Santa B↗
DOE OSTI2026

NiFeCo-based catalysts in high current zero-gap anion exchange membrane water electrolyzers

Understanding degradation mechanisms in pure water anion exchange membrane water electrolyzers is essential for developing durable and precious metal-free hydrogen production systems, yet electronic, chemical, and transport-driven pathways often occur simultaneously at the anode. To separate these effects, we establish a morphology invariant Ni/Fe/Co thin film model catalyst platform using physical vapor deposition and systematically compare composition-dependent behavior under both pure water and 0.1 M KOH feeds. Devices were operated under industrially relevant current density conditions, galvanostatically at 1 A cm −2 for 24 hours; metal dissolution, ionomer oxidation, and resistance growth were quantified using inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy. Under pure-water operation, Ni-rich films showed voltage increases that correlated with rising total cell resistance (ΔV ≈ 243 mV, ΔR ≈ 0.17 Ω cm 2 ). Co-rich films maintained near constant voltages with minimal resistance change (ΔV < 10 mV, ΔR ≈ 0.03 Ω cm 2 ) but induced pronounced ionomer oxidation observed by XPS. In 0.1 M KOH, ionomer oxidation is suppressed, and impedance growth is minimized (<0.08 Ω cm 2 ) across all compositions, consistent with reduced transport limitations and improved ionic conduction relative to pure-water feeds. These results demonstrate how a controlled thin film model platform can isolate composition electrolyte relationships and provide mechanistic design principles for stable pure water anion exchange membrane electrolyzers.

Milenia Rojas Mendoza, B. [Stanford Univ., CA (Uni↗
DOE OSTI2026

Evolution of size-selected Pt cluster catalysts on prototypical oxide supports

The current quest for new pathways into sustainable, efficient and durable energy conversion technologies makes the used for a fundamental understanding of the atomic-scale phenomena underlying catalytic processes ever more pressing. In this context, characterizing catalyst particles in situ provides valuable information about the evolution of their composition, structure, oxidation state and charge state during an ongoing process. To disentangle the influence of individual parameters – temperature, pressure, gas composition, cluster size, as well as support acidity, redox state and defect density – it is crucial to control them precisely and separately in experiments. At the example of size-selected Pt n clusters – i.e. sub-nm particles defined to the exact number of atoms – on flat oxide supports, we follow their rich evolution phenomena via (synchrotron-based) X-ray photoelectron spectroscopy (XPS) and scanning tunnelling microscopy (STM) during temperature ramps and in various gas environments. Here, we present our experience with these highly defined, yet complicated-to-create samples in ultra-high vacuum (UHV) and at mbar pressures. We discuss their stability during transport to synchrotrons and under reaction conditions on three prototypical oxide supports and show the various phenomena that can be disentangled. Ptn clusters on the non-reducible silicon dioxide, SiO 2 , remain size-selected and show remarkable stability. Doping strongly influences the size-dependent binding energy shifts and changes the Pt response to oxidative and reaction conditions, which we attribute to different cluster geometries: p-type doping leads to wetting, enhanced sinter resistance and a diminished response to oxidative environments, compared to clusters on n-type doped samples. We compare the system with our previous findings of a similar change in dimensionality for Pt 20 clusters on the reducible ceria, CeO 2 (111), support, induced by modulation of its O vacancy density. The Pt n /CeO 2 system is particularly interesting for strategies to stabilize and redisperse Pt clusters dynamically. Finally, we study the evolution of Pt n clusters on another reducible oxide support, magnetite, Fe 3 O 4 (001), in 0.1 mbar alternating redox conditions at RT and elevated temperature. In analogy to findings previously reported for Pt/TiO 2 (110), the clusters either become encapsulated by a thin oxide film via strong metal–support interaction (SMSI) or deeply buried in the magnetite. Overall, our approach of following the evolution of size-selected clusters on oxide supports leads to fundamental atomic-scale insights on nano-scale catalyst materials, on our path to sustainable, dynamic and self-repairing catalysts.

Falling, Lorenz J. [Technical Univ. of Munich (Ger↗
DOE OSTI2020

Morphology and chemical behavior of model CsO x /Cu 2 O/Cu(111) nanocatalysts for methanol synthesis: Reaction with CO 2 and H 2

Cs is a promoter of Cu-based catalysts for the synthesis of alcohols from CO 2 hydrogenation. Scanning tunneling microscopy and ambient-pressure x-ray photoelectron spectroscopy were used to study the morphology and chemical properties of surfaces generated by the deposition of cesium on Cu 2 O/Cu(111) and Cu(111) substrates. CsO x nanostructures were formed after Cs metal was deposited on Cu 2 O/Cu(111) at 300 K. The formed CsO x protrude over the surface of copper oxide by 2–4 Å, with the dimension at the base of the nanostructures being in the range of 1–3 nm. Heating to elevated temperature induced significant changes in the size and dispersion of the CsO x nanostructures, and there was a clear reconstruction of the copper oxide substrate, which then exhibited long range order with a hexagonally packed structure. The as-deposited and annealed surfaces of CsO x /Cu 2 O/Cu(111) were more reactive toward CO 2 than plain Cu 2 O/Cu(111) or clean Cu(111). Yet, none of them were stable in the presence of H 2 , which fully reduced the copper oxide at 400–450 K. In CsO x /Cu(111), the CsO x nanoclusters were dispersed all over the metallic copper in no particular order. The CsO x species had an average width of 2 nm and ~1 Å height. The CsO x /Cu(111) systems exhibited the highest activity for the binding and dissociation of CO 2 , indicating that the CsO x -copper interface plays a key role in alcohol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Use of Au@Void@TiO 2 yolk-shell nanostructures to probe the influence of oxide crystallinity on catalytic activity for low-temperature oxidations

A series of Au@Void@TiO 2 yolk-shell structures were synthesized and characterized, and their catalytic activity was tested for the oxidation of carbon monoxide. The target of this study was to evaluate the effects of (1) the crystallinity of the TiO 2 shell and (2) the presence of titanate phases. Transmission electron microscopy and X-ray diffraction data show that increasing calcination temperatures, from 850 to 1250 K, leads to the formation of larger titania crystallites. These crystallites are typically in the form of anatase, but some rutile is also made at high temperatures. The general yolk-shell nanostructures retain their basic characteristics upon calcination and upon treatment with HCl (used to remove the titanate phases), but a few structural and chemical changes do take place: (1) the void-space diameter is reduced by approximately 10% when going from T Calc = 850 K to T Calc = 1250 K, a change that is accompanied by a decrease in the surface area (estimated from N 2 adsorption-desorption isotherms); (2) the shell thickness remains unaffected by either calcination or HCl treatment; (3) the pore volume also remains approximately constant with increasing calcination temperature in the catalysts free of titanates but diminishes significantly in the samples with titanate phases; (4) the mesoporosity is minimal in all yolk-shell nanostructures but more noticeable with the pure TiO 2 shells; (5) the titanates have high Na content (measured by X-ray photoelectron spectroscopy), but that Na is fully removed upon treatment with HCl; (6) no Ti 3+ was detectable in any of the samples, but silica, together with C and (minor amounts of) N, was present in all; (7) all Au is in metallic form; (8) two temperature regimes were observed for the catalytic oxidation of CO, as reported for other similar samples in the past, an Arrhenius regime around or above room temperature, and a cryogenic range going to temperatures as low as 120 K; (9) the latter regime is only seen with the samples containing titanate phases; (10) the titanates seem to also aid in the oxidation at higher temperatures; and (11) in general, increasing titania crystallinity leads to a decrease the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗