Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EROSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Late Holocene Cliff Retreat in Del Mar, CA, Revealed From Shore Platform 10 Be Concentrations and Numerical Modeling

Rocky coast cliff retreat presents a hazard to coastal communities and infrastructure that is potentially amplified under rising sea level conditions, among other factors. Unfortunately, constraints on retreat rates are typically limited to those derived from imagery and maps spanning the last ~100 years. Here, we use a newly developed coupled model of shore platform profile evolution and cosmogenic radionuclide production that considers the influence of relative sea level (RSL) rise, weathering, material resistance, and wave height decay to model cliff retreat over millennial timescales and its potential drivers in Del Mar, California. We demonstrate the ability to use topographic and bathymetric measurements from a narrow shore platform along with a limited data set of nine cosmogenic 10Be concentrations extending ~125 m from the cliff base to obtain modeled cliff retreat rates that steadily range from 5.0 to 12.5 cm yr -1 over the last two millennia until 100 years before present. These rates are consistent with modern retreat rates of about 2–19 cm yr -1 here. RSL rise in Southern California remained relatively constant during the late Holocene, potentially explaining the relatively stable modeled cliff retreat rate over this time. We also explore the relative influence of weathering, material resistance, and wave erosion efficacy and find that both weathering and wave-driven erosion are necessary to replicate the measured data at this location, with the latter exerting a stronger control on model acceptance, suggesting that waves may provide a possible mechanism by which RSL rise may influence coastal cliff erosion in southern California.

58 GEOSCIENCES↗

Eroding Permafrost Coastlines Release Biodegradable Dissolved Organic Carbon to the Arctic Ocean

Coastal erosion mobilizes large quantities of organic matter (OM) to the Arctic Ocean where it may fuel greenhouse gas emissions and marine production. While the biodegradability of permafrost-derived dissolved organic carbon (DOC) has been extensively studied in inland soils and freshwaters, few studies have examined dissolved OM (DOM) leached from eroding coastal permafrost in seawater. To address this knowledge gap, we sampled three horizons from bluff exposures near Drew Point, Alaska: seasonally thawed active layer soils, permafrost containing Holocene terrestrial and/or lacustrine OM, and permafrost containing late-Pleistocene marine-derived OM. Samples were leached in seawater to compare DOC yields, DOM composition (chromophoric DOM, Fourier transform ion cyclotron resonance mass spectrometry), and biodegradable DOC (BDOC). Holocene terrestrial permafrost leached the most DOC compared to active layer soils and Pleistocene marine permafrost. However, DOC from Pleistocene marine permafrost was the most biodegradable (33 ± 6% over 90 days), followed by DOC from active layer soils (23 ± 5%) and Holocene terrestrial permafrost (14 ± 3%). Permafrost leachates contained relatively more aliphatic and peptide-like formulae, whereas active layer leachates contained relatively more aromatic formulae. BDOC was positively correlated with nitrogen-containing and aliphatic formulae, and negatively correlated with polyphenolic and condensed aromatic formulae. Using estimates of eroding OM, we scale our results to estimate DOC and BDOC inputs to the Alaska Beaufort Sea. While DOC inputs from coastal erosion are relatively small compared to rivers, our results suggest that erosion may be an important source of BDOC to the Beaufort Sea when river inputs are low.

Bristol, Emily M.↗

Soil Organic Matter Stabilization by Polyvalent Cations in a Buried Alkaline Soil

Buried paleosols can store large quantities of organic carbon (C), much of which persists for millennia due to isolation from surface processes that promote decomposition. Subsoil organic matter (SOM) persistence is often enhanced by mineral associations and ionic conditions—particularly high clay content and polyvalent cations—that limit microbial degradation and leaching. However, the vulnerability of these deep C stocks under erosion or environmental change remains poorly understood. This study investigates controls on SOM stabilization in the Brady paleosol and overlying modern soils across contrasting geomorphic settings in the Great Plains of Nebraska where Late Quaternary loess deposition and erosion created a sequence of buried and exposed paleosols. We sampled soils along burial and erosional toposequences and analyzed their physicochemical properties and radiocarbon‐based persistence of occluded particulate organic matter (oPOM) and mineral fractions (MF). Brady paleosol showed greater persistence (lower Fm) of oPOM and MF than modern soils, particularly under burial. This was linked to higher silt and clay content, elevated electrical conductivity, and increased exchangeable calcium and magnesium content, supporting roles for organo‐mineral interactions, flocculation, and carbonate cementation. In modern soils, SOM persistence and C content were more strongly tied to pH and cation exchange capacity. Erosional exposure reduced SOM stability and promoted geochemical convergence toward modern surface soils. These findings show that burial enhances SOM persistence via multiple stabilization mechanisms, while erosion increases subsoil C vulnerability. Our results underscore the importance of geomorphic and geochemical context in predicting soil C stability under environmental change.

Environmental sciences↗

Ion-assisted phase separation in compound films: An alternate route to ordered nanostructures

In recent years, observations of highly ordered, hexagonal arrays of self-organized nanostructures on binary or impurity-laced targets under normal-incidence ion irradiation have excited interest in this phenomenon as a potential route to high-throughput, low-cost manufacture of nanoscale devices or nanostructured coatings. The currently prominent explanation for these structures is a morphological instability driven by ion erosion discovered by Bradley and Shipman; however, recent parameter estimates via molecular dynamics simulations suggest that this erosive instability may not be active for the representative GaSb system in which hexagonal structures were first observed. Motivated by recent experimental and numerical evidence suggesting the likely importance of phase separation during thin-film processing, we here generalize the Bradley-Shipman theory to include the effect of ion-assisted phase separation. The resulting system admits a chemically driven finite-wavelength instability that can explain the order of observed patterns even when the erosive Bradley-Shipman instability is inactive. In a relevant simplifying limit, it also provides an intuitive instability criterion similar to results in thin-film deposition, as well as predictions on pattern wavelengths that agree qualitatively with experimental observations. Finally, we identify a characteristic experimental signature that distinguishes the chemical and morphological instabilities and highlights the need for specific additional experimental data on the GaSb system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MODELING COLLISIONAL CASCADES IN DEBRIS DISKS: THE NUMERICAL METHOD

We develop a new numerical algorithm to model collisional cascades in debris disks. Because of the large dynamical range in particle masses, we solve the integro-differential equations describing erosive and catastrophic collisions in a particle-in-a-box approach, while treating the orbital dynamics of the particles in an approximate fashion. We employ a new scheme for describing erosive (cratering) collisions that yields a continuous set of outcomes as a function of colliding masses. We demonstrate the stability and convergence characteristics of our algorithm and compare it with other treatments. We show that incorporating the effects of erosive collisions results in a decay of the particle distribution that is significantly faster than with purely catastrophic collisions.

79 ASTRONOMY AND ASTROPHYSICS↗

Small resonant magnetic perturbations result in three-dimensional material transport in the fusion plasma edge

Erosion patterns in a 3D magnetic topology are significantly altered when compared to an axisymmetric scenario due to differences in the impurity transport in a plasma environment. When resonant magnetic perturbations are applied in L-Mode discharges, eroded impurities can buildup in regions where an axisymmetric plasma would otherwise lead to zones of net erosion across the full toroidal length of the divertor. The reduction on the local and integrated erosion observed across a parametric study of the anomalous diffusion and impurity content in a plasma, can lead to the extension of divertor lifetimes in low power scenarios when 3D fields are applied. By contrast, in axisymmetric scenarios, most of the carbon eroded from the divertor are carried away to the far scrape-off layer.

DIII-D↗

Comprehensive new insights on the potential use of SiC as plasma-facing materials in future fusion reactors

Abstract The performance of silicon carbide as an alternative plasma facing material (PFM) was studied at various irradiation conditions relevant to ion energies and fluxes of a fusion reactor. This analysis involves detailed modeling of subsurface plasma/material interactions, sputtered particle transport above the surface and redeposition, and related changes in material composition and microstructure induced by steady-state and Edge Localized Mode ion fluxes. Transition of a crystalline SiC surface to semi-crystalline and amorphous phases was analyzed based on advanced modeling of DIII-D tokamak experiments where SiC was irradiated in single- and multiple- L-mode and H-mode discharges. This analysis shows that displacement damage, particle deposition/redeposition, and D accumulation on the SiC divertor surface can lead to significant microstructural changes that result in enhanced sputtering erosion in comparison with the original crystalline material. However, the resulting total net erosion rate for a full-coverage, advanced tokamak, SiC coated divertor may well be acceptably low. Moreover, the C sputtering yield from the evolved SiC surface can be seven times lower than from a pure graphite surface; this would imply significantly reduced tritium co-deposition rates in a D-T tokamak reactor, compared with a pure carbon surface. It was also determined that chemical sputtering of both C and Si should not result in any noticeable effect on the net erosion, for attached plasma regimes. Our results thus show encouraging results overall for use of SiC as a PFM in tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SOLEDGE3X full vessel plasma boundary simulations of ITER non-active phase plasmas

The onset of detachment in the ITER machine is analyzed in this work through the help of 2D-axisymmetric boundary plasma simulations with the SOLEDGE3X-EIRENE code, which features a numerical domain for the plasma solver extending up to the first wall. The plasma boundary is computed in scenarios from the first non-active phase of ITER, in pure H and at 20 MW. This set of simulations is used in two aspects: first, to study the plasma detachment in the divertor, and second, the plasma conditions, fluxes, and beryllium erosion at the first wall. Here, the code results are also compared to those obtained with the well-established SOLPS-ITER code, which includes a plasma numerical domain only covering the main SOL. Results show an increase in the SOL width λ q with increasing density, and a detailed analysis is carried out, for the first time, on each of the different plasma-neutral interactions in the code’s physics model in EIRENE. The gross beryllium erosion rates of first wall panels are estimated from 2D simulations, with the aim of assessing their sensitivity to two parameters: the divertor density regime, and the presence of density shoulders in the far-SOL formed by enhanced perpendicular transport at this location. The erosion contributions from neutrals and ions are considered in each case, and the charge-exchange atoms fluxes and energy distributions are provided, highlighting the two atom populations (cold and charge-exchange).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Amorphization and siliconization of silicon carbide as a first wall material

The understanding and prediction of silicon carbide (SiC) material evolution exposed to SOL plasma conditions is of prime interest because SiC represents a promising main chamber wall plasma-facing material for next-step fusion devices (low hydrogenic diffusion, good mechanical and thermal properties under neutron irradiation). Gross and net Si erosion rates from SiC surfaces in contact with a well-diagnosed L-mode plasma in the DIII-D tokamak have been simulated and the surface concentrations of impurities have been tracked as a function of time. Coupled simulation of surface model and impurity transport demonstrates amorphization of crystalline SiC exposed to L-mode plasma due to the accumulation of displacement damages under ion irradiation. This affects the lifetime of SiC plasma facing components. Surface evolution is tightly coupled to impurity transport in the plasma and therefore needs to be integrated with impurity transport simulations to effectively predict Si erosion rates and sub-surface concentrations as a function of time. The simulation workflow couples a semi-analytical surface model to the impurity transport code GITR. The surface model is a homogeneous mixed-material model that tracks physical & chemical sputtering and reflection of impurities. Gross erosion is primarily influenced by the background plasma parameters and redeposition patterns are mainly influenced by the prompt redeposition due to the gyro-orbits of impurity ions. Although crystalline form of SiC is preferable for fusion wall applications because of resistance to neutron irradiation, this work indicates that crystalline SiC will undergo amorphization under D plasma contact with implications of higher sputtering and fuel retention. These results direct us to explore the effects of amorphization on crystalline SiC and further the physics basis of SiC usage as first wall material for fusion environments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Assessment of the literature about Be-W mixed material layer formation in the fusion reactor environment

Abstract All plasma facing surfaces in a fusion reactor, whether initially pure or an alloy, will rapidly evolve into a mixed material due to plasma-induced erosion, migration and redeposition. Beryllium (Be) erosion from the main chamber, and its transport and deposition on to a tungsten (W) divertor results in the growth of mixed Be-W layers, which can evolve to form beryllides. These Be-W mixed materials exhibit generally less desirable properties than pure tungsten or pure beryllium, such as lower melting points. In order to better understand the parameter space for growth of these alloys, this paper reviews the literature on Be-W mixed material formation experiments—in magnetically confined fusion reactors, in linear plasma test stands, and during thin-film deposition—and on computational modeling of Be-W interactions, as well as briefly assesses the Be-W growth kinetics. We conclude that the following kinetic steps drive the material mixing: adsorption of the implanted/deposited ion on the metal surface; diffusion of the implanted/deposited ion from surface into the bulk, which is accelerated by defects; and loss of deposited material through erosion. Adsorption dominates (or prevents) material mixing in thin-film deposition experiments, whereas diffusion drives material mixing in plasma exposures due to the energetic ion implantation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Riverbank temperatures on the Selawik River, Alaska 2010-2012, and Koyukuk River, Alaska June to July 2018.

The data package includes temperature measurements from riverbanks along the Selawik and Koyukuk Rivers in northwest Alaska. The Selawik River data also includes meteorological data collected locally and the Koyukuk River includes bulk density and ice content data from the riverbanks. The Selawik River data was collected between 2010 and 2013 with meteorological data collected for the entire time period and riverbank temperatures collected in shorter time intervals between 2010 to 2012. All of the Selawik River data were collected a single river bend. The Koyukuk River temperature data was collected from late June to early July 2018 at a total of five locations on three riverbanks. Ice content measurements on the Koyukuk were made at five riverbank locations. The data collection on both rivers was done in support of studies on the influence of permafrost on riverbank erosion. The temperature data was collected to monitor the thermal conditions of the river banks both seasonally and during periods of erosion. The ice content of the banks was measured to better understand how bank erosion rates are influenced by ice in the frozen riverbanks.

54 ENVIRONMENTAL SCIENCES↗

Is Corn Stover Harvest Predictable Using Farm Operation, Technology, and Management Variables?

Core Ideas Corn stover removal was not common in 2010. Crop sequences were similar for stover and non‐stover harvest farms. State‐level variation occurred in the relative size of farms removing corn stover. Soil erosion control measures were not frequently adopted by either farm group. Crop residue management, provision of animal feed or bedding, and increased income are potential reasons for harvesting corn ( Zea mays L.) stover. Reasons for not doing so include the need for crop residue to restore or increase soil organic matter, protect against wind and water erosion, and cycle plant nutrients. Bioenergy market development may increase the number of producers harvesting corn stover. Can farming practice data predict the likelihood for harvesting corn stover at a national scale? Farm operation, technology, and management variables from the 2010 Agricultural Resource Management Survey (ARMS) of U.S. corn growers were compared between operations that removed corn stover and those that did not. Nationwide, stover was removed from approximately 6.3% of all corn operations, indicating stover harvest was not a common practice in 2010. Factors increasing the likelihood for stover harvest included producing feed corn, managing crop residues for pest control, and farmland ownership. Technology and conservation practice adoption rates were similar in both groups. Excessive stover removal can increase soil degradation. Both groups had erosion control adoption rates of ≤10%, which may provide an additional disincentive to harvest stover. Overall, the evaluated variables were similar between producers that did and did not harvest stover. This assessment provides a 2010 national baseline that can be used for future evaluations as bioenergy and bioproduct markets develop.

54 ENVIRONMENTAL SCIENCES↗

OECD/MCCI 2-D Core Concrete Interaction (CCI) tests : final report February 28, 2006.

Although extensive research has been conducted over the last several years in the areas of Core-Concrete Interaction (CCI) and debris coolability, two important issues warrant further investigation. The first issue concerns the effectiveness of water in terminating a CCI by flooding the interacting masses from above, thereby quenching the molten core debris and rendering it permanently coolable. This safety issue was investigated in the EPRI-sponsored Melt Attack and Coolability Experiments (MACE) program. The approach was to conduct large scale, integral-type reactor materials experiments with core melt masses ranging up to two metric tons. These experiments provided unique, and for the most part repeatable, indications of heat transfer mechanism(s) that could provide long term debris cooling. However, the results did not demonstrate definitively that a melt would always be completely quenched. This was due to the fact that the crust anchored to the test section sidewalls in every test, which led to melt/crust separation, even at the largest test section lateral span of 1.20 m. This decoupling is not expected for a typical reactor cavity, which has a span of 5-6 m. Even though the crust may mechanically bond to the reactor cavity walls, the weight of the coolant and the crust itself is expected to periodically fracture the crust and restore contact with the melt. Although crust fracturing does not ensure that coolability will be achieved, it nonetheless provides a pathway for water to recontact the underlying melt, thereby allowing other debris cooling mechanisms to proceed. A related task of the current program, which is not addressed in this particular report, is to measure crust strength to check the hypothesis that a corium crust would not be strong enough to sustain melt/crust separation in a plant accident. The second important issue concerns long-term, two-dimensional concrete ablation by a prototypic core oxide melt. As discussed by Foit the existing reactor material database for dry cavity conditions is solely one-dimensional. Although the MACE Scoping Test was carried out with a two-dimensional concrete cavity, the interaction was flooded soon after ablation was initiated to investigate debris coolability. Moreover, due to the scoping nature of this test, the apparatus was minimally instrumented and therefore the results are of limited value from the code validation viewpoint. Aside from the MACE program, the COTELS test series also investigated 2-D CCI under flooded cavity conditions. However, the input power density for these tests was quite high relative to the prototypic case. Finally, the BETA test series provided valuable data on 2-D core concrete interaction under dry cavity conditions, but these tests focused on investigating the interaction of the metallic (steel) phase with concrete. Due to these limitations, there is significant uncertainty in the partition of energy dissipated for the ablation of concrete in the lateral and axial directions under dry cavity conditions for the case of a core oxide melt. Accurate knowledge of this 'power split' is important in the evaluation of the consequences of an ex-vessel severe accident; e.g., lateral erosion can undermine containment structures, while axial erosion can penetrate the basemat, leading to ground contamination and/or possible containment bypass. As a result of this uncertainty, there are still substantial differences among computer codes in the prediction of 2-D cavity erosion behavior under both wet and dry cavity conditions. In light of the above issues, the OECD-sponsored Melt Coolability and Concrete Interaction (MCCI) program was initiated at Argonne National Laboratory. The project conducted reactor materials experiments and associated analysis to achieve the following technical objectives: (1) resolve the ex-vessel debris coolability issue through a program that focused on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term 2-D core-concrete interactions under both wet and dry cavity conditions. Data from the various tests conducted as part of the program are being used to develop and validate models and codes that are used to extrapolate the experimental findings to plant conditions. Achievement of these technical objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs of future plants. The project completed three large scale CCI experiments to address the second technical objective defined above.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

OECD MCCI project final report, February 28, 2006.

Although extensive research has been conducted over the last several years in the areas of Core-Concrete Interaction (CCI) and debris coolability, two important issues warrant further investigation. The first issue concerns the effectiveness of water in terminating a CCI by flooding the interacting masses from above, thereby quenching the molten core debris and rendering it permanently coolable. This safety issue was investigated in the Melt Attack and Coolability Experiments (MACE) program. The approach was to conduct large scale, integral-type reactor materials experiments with core melt masses ranging up to two metric tons. These experiments provided unique, and for the most part repeatable, indications of heat transfer mechanism(s) that could provide long term debris cooling. However, the results did not demonstrate definitively that a melt would always be completely quenched. This was due to the fact that the crust anchored to the test section sidewalls in every test, which led to melt/crust separation, even at the largest test section lateral span of 1.20 m. This decoupling is not expected for a typical reactor cavity, which has a span of 5-6 m. Even though the crust may mechanically bond to the reactor cavity walls, the weight of the coolant and the crust itself is expected to periodically fracture the crust and restore contact with the melt. The fractured crust will provide a pathway for water to recontact the underlying melt, thereby allowing other debris cooling mechanisms to proceed and contribute to terminating the core-concrete interaction. Thus, one of the key aims of the current program was to measure crust strength to check the hypothesis that a corium crust would not be strong enough to sustain melt/crust separation in a plant accident. The second important issue concerns long-term, two-dimensional concrete ablation by a prototypic core oxide melt. As discussed by Foit, the existing reactor material database for dry cavity conditions is solely one-dimensional. Although the MACE Scoping Test was carried out with a two-dimensional concrete cavity, the interaction was flooded soon after ablation was initiated to investigate debris coolability. Moreover, due to the scoping nature of this test, the apparatus was minimally instrumented and therefore the results are of limited value from the code validation viewpoint. Aside from the MACE program, the COTELS test series also investigated 2-D CCI under flooded cavity conditions. However, the input power density for these tests was quite high relative to the prototypic case. Finally, the BETA test series provided valuable data on 2-D core concrete interaction under dry cavity conditions, but these tests focused on investigating the interaction of the metallic (steel) phase with concrete. Due to these limitations, there is significant uncertainty in the partitioning of energy dissipated for the ablation of concrete in the lateral and axial directions under dry cavity conditions for the case of a core oxide melt. Accurate knowledge of this 'power split' is important in the evaluation of the consequences of an ex-vessel severe accident; e.g., lateral erosion can undermine containment structures, while axial erosion can penetrate the basemat, leading to ground contamination and/or possible containment bypass. As a result of this uncertainty, there are still substantial differences among computer codes in the prediction of 2-D cavity erosion behavior under both wet and dry cavity conditions. Thus, a second key aim of the current program was to provide the necessary data to help resolve these modeling differences. In light of the above issues, the OECD-sponsored Melt Coolability and Concrete Interaction (MCCI) program was initiated at Argonne National Laboratory. The project conducted reactor materials experiments and associated analysis to achieve the following technical objectives: (1) resolve the ex-vessel debris coolability issue through a program that focused on providing both confirmatory evidence and test data for the coolability mechanisms identified in previous integral effects tests, and (2) address remaining uncertainties related to long-term 2-D core-concrete interaction under both wet and dry cavity conditions. Data from the various tests conducted as part of the program is used to develop and validate models and codes that eventually form the basis for extrapolating the experimental findings to plant conditions. Achievement of these technical objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs of future plants. The project completed a total of eleven reactor material tests to investigate melt coolability and 2-D core-concrete interaction mechanisms under both wet and dry cavity conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

OECD MCCI Project: Category 4 Integral Test to Validate Severe Accident Codes and Core-Concrete Interaction Test Six (CCI-6) (Rev. 2, Final Report)

Ex-vessel debris coolability is an important light water reactor (LWR) technical challenge. For existing plants, resolution of this challenge will confirm the technical basis for severe accident management guidelines (SAMGs). For new reactors, understanding this challenge will help confirm the effectiveness of the design and implementation of new accident mitigation features and severe accident management design alternatives (SAMDAs). The first OECD-MCCI program conducted reactor material experiments focused on achieving the following technical objectives: i) provide confirmatory evidence and data for various cooling mechanisms through separate effect tests for severe accident model development, and ii) provide long-term 2-D coreconcrete interaction data for code assessment and improvement. In addition to the experimental work, an analysis task was defined to develop and validate coolability models to form the basis for extrapolating the experiment findings to plant conditions. In response to the PRG mandate, a summary test plan for this sixth Core-Concrete Interaction (CCI-6) experiment was prepared, reviewed by the PRG, and subsequently approved for test conduct. The experiment approach was to incorporate an array of water nozzles into the core-concrete interaction test apparatus. The test section was enlarged to incorporate a 70 cm x 70 cm basemat. The initial melt depth was increased to 28 cm, which corresponds to a thermite charge mass of 900 kg. The melt depth is noted to be slightly less than the 30 cm level requested by the PRG. The thermite charge was redesigned to include a reduced amount of concrete decomposition products (i.e., 6 wt %) relative to the previously performed CCI tests. The concrete sidewalls allow for 24 cm of lateral erosion, and the sidewall design was modified to include refractory MgO with a UO 2 pellet and U 3 O 8 powder liner to stop the ablation if the 24 cm ablation depth was reached. The basemat and sidewalls also included an array of 45 concrete nozzles that were arranged on a 14 cm lateral pitch and were located at a uniform depth of 27.5 cm below the initial concrete basemat surface elevation. The nozzles were originally sealed at the top, and were fed with water from a common water supply tank that provided a static water head of nominally 10 kPa measured at the upper surface of the nozzles. The planned operating sequence was to ignite the thermite and then provide 210 kW Direct Electrical Heating (DEH) to simulate decay heat. The concrete would then heat up and begin erosion. At this point, the cavity would be flooded from the top. If the melt did not cool, then the core-concrete interaction would continue until the 27.5 cm axial ablation depth was reached. At this point, the nozzles would open by erosion and thus initiate cooling by bottom water injection. The test would continue to operate until the melt was quenched, or the maximum axial ablation depth of 32.5 cm was reached. The experiment would then be terminated. The CCI-6 experiment was carried out on 18 March 2010. The balance of this report documents the facility, actual test operating procedure, and results from this experiment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Variability In Long-Wave Runup as a Function of Nearshore Bathymetric Features

Beaches and barrier islands are vulnerable to extreme storm events, such as hurricanes, that can cause severe erosion and overwash to the system. Having dunes and a wide beach in front of coastal infrastructure can provide protection during a storm, but the influence that nearshore bathymetric features have in protecting the beach and barrier island system is not completely understood. The spatial variation in nearshore features, such as sand bars and beach cusps, can alter nearshore hydrodynamics, including wave setup and runup. The influence of bathymetric features on long-wave runup can be used in evaluating the vulnerability of coastal regions to erosion and dune overtopping, evaluating the changing morphology, and implementing plans to protect infrastructure. In this thesis, long-wave runup variation due to changing bathymetric features as determined with the numerical model XBeach is quantified (eXtreme Beach behavior model). Wave heights are analyzed to determine the energy through the surfzone. XBeach assumes that coastal erosion at the land-sea interface is dominated by bound long-wave processes. Several hydrodynamic conditions are used to force the numerical model. The XBeach simulation results suggest that bathymetric irregularity induces significant changes in the extreme long-wave runup at the beach and the energy indicator through the surfzone.

58 GEOSCIENCES↗

HVOF Thermal Spray TiC/TiB 2 Coatings for AUSC Boiler/Turbine Components for Enhanced Corrosion Protection

The high temperatures of operations still pose significant risk of degradation and fatigue from oxidizing, corroding and eroding environment. In addition to unused O 2 , water from combustion and SO x from the coal sulfur oxidation that result in highly corrosive environment, acid gases such as HCl and other sulfur compounds may also be present. These adverse effects are further accelerated due to the elevated temperatures. In addition, ash particulates and unburnt carbon and pyritic sulfur can cause erosion of the surface and thus loss of material. Unburnt carbon and pyritic sulfur may also cause localized reduction sites. Thus, fireside corrosion protection and steam oxidation protection alternatives to currently used Ni-Cr overlays need to be identified and evaluated. Titanium carbide (TiC) is a suitable alternative on account of the material features such as the high hardness, the high melting point, the high strength and the low density for the substitution or to be used in conjunction with NiCr for enhancing the fireside corrosion and erosion of the materials. Another alternative is the use of titanium boride as a coating for chemical stability required for long-term service and high erosion resistance over the state-of-the-art, high fracture toughness (K 1C ~12 MPam 1/2 ) and excellent corrosion resistance (kp~1.9X10 -11 g 2 /cm 4 /s at 800°C in air). The overarching aim of the research endeavor was to synthesize oxidation, corrosion and wear resistant TiC and TiB 2 coating powders, apply thermal spray coating on existing boiler materials and characterize the coated substrates for corrosion resistance for applications at high temperatures (500 -750 °C) and high pressures (~350 bars) using the HVOF process and to demonstrate the feasibility of these coating to be used in AUSC boilers and turbines.

20 FOSSIL-FUELED POWER PLANTS↗