Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CoNNECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Dynamics of a spinning space station with a counterweight connected by multiple cables.

A unique and relatively simple approach is presented for obtaining the linearized equations of motion. A conservative system consisting of two rigid bodies connected by any number of massless cables with linear axial stiffness is assumed. The cable forces and torques are expanded in a Taylor series about the equilibrium values of the system coordinates which results in a cable stiffness matrix. The method of obtaining the equilibrium values of the coordinates is discussed and results are presented. The range of validity of the linear model is determined by comparing results with a digital simulation of the nonlinear system.

Nixon, D. D.↗

Cable Connected Spinning Spacecraft, 1. the Canonical Equations, 2. Urban Mass Transportation, 3

Work on the dynamics of cable-connected spinning spacecraft was completed by formulating the equations of motion by both the canonical equations and Lagrange's equations and programming them for numerical solution on a digital computer. These energy-based formulations will permit future addition of the effect of cable mass. Comparative runs indicate that the canonical formulation requires less computer time. Available literature on urban mass transportation was surveyed. Areas of the private rapid transit concept of urban transportation are also studied.

Sitchin, A.↗

Optimum allocation of redundancy among subsystems connected in series

This analysis considers the optimum allocation of redundancy in a system of serially connected subsystems in which each subsystem is of the k-out-of-n type. Redundancy is optimally allocated when: (1) reliability is maximized for given costs; or (2) costs are minimized for given reliability. Several techniques are presented for achieving optimum allocation and their relative merits are discussed. Approximate solutions in closed form were attainable only for the special case of series-parallel systems and the efficacy of these approximations is discussed.

Bien, D. D.↗

Dynamic analysis of a system of hinge-connected rigid bodies with nonrigid appendages

Equations of motion are derived for use in simulating a spacecraft or other complex electromechanical system amenable to idealization as a set of hinge-connected rigid bodies of tree topology, with rigid axisymmetric rotors and nonrigid appendages attached to each rigid body in the set. In conjunction with a previously published report on finite-element appendage vibration equations, this report provides a complete minimum-dimension formulation suitable for generic programming for digital computer numerical integration.

Likins, P. W.↗

Attitude dynamics simulation subroutines for systems of hinge-connected rigid bodies

Several computer subroutines are designed to provide the solution to minimum-dimension sets of discrete-coordinate equations of motion for systems consisting of an arbitrary number of hinge-connected rigid bodies assembled in a tree topology. In particular, these routines may be applied to: (1) the case of completely unrestricted hinge rotations, (2) the totally linearized case (all system rotations are small), and (3) the mixed, or partially linearized, case. The use of the programs in each case is demonstrated using a five-body spacecraft and attitude control system configuration. The ability of the subroutines to accommodate prescribed motions of system bodies is also demonstrated. Complete listings and user instructions are included for these routines (written in FORTRAN V) which are intended as multi- and general-purpose tools in the simulation of spacecraft and other complex electromechanical systems.

Fleischer, G. E.↗

Dynamic analysis of a system of hinge-connected rigid bodies with nonrigid appendages

Equations of motion are derived for use in simulating a spacecraft or other complex electromechanical system amenable to idealization as a set of hinge-connected rigid bodies of tree topology, with rigid axisymmetric rotors and nonrigid appendages attached to each rigid body in the set. In conjunction with a previously published companion paper on finite-element appendage vibration equations, this paper provides a complete minimum-dimension formulation suitable for generic programming for digital computer numerical integration.

Likins, P. W.↗

Connective stability of nonlinear matrix systems

Consideration of stability under structural perturbations of free dynamic systems described by the differential equation dx/dt = A(t,x)x, where the matrix A(t,x) has time-varying nonlinear elements. The concept of 'connective stability' is introduced to study the structural properties of competitive-cooperative nonlinear matrix systems. It is shown that stability reliability in such systems is high and that they remain stable despite time-varying (including 'on-off') interaction among individual agents present in the system. The results obtained can be used to study stability aspects of mathematical models arising in as diverse fields as economics, biology, arms races, and transistor circuits.

Siljak, D. D.↗

Instabilities connected with neutral sheets in the solar wind

A preliminary study is presented of two sets of data obtained by HEOS 1 and OGO 5 in the solar wind, which reveal the internal structure of two neutral sheets and their two-dimensional structure. HEOS 1 observations of the effects of the tearing mode instability in one of the sheets are described, including complicated structures connected with the sector boundary, sharp increases and decreases in the magnetic field intensity, and the presence of closed loops. HEOS 1 and OGO 5 observations of large oscillations due to plasma pressure imbalances are discussed, and it is concluded that an interchange instability may have been observed.

Formisano, V.↗

Point-connected rigid bodies in a topological tree

The purpose of the present paper is to explore the applicability of several methods of analytical mechanics to the modern problem of formulating generic equations of motion of a point-connected set of rigid bodies in a topological tree, in order to compare the results of the previously published Hooker-Margulies/Hooker equations. The unexpected result of the inquiry is the discovery that with the substitution of a key kinematical identity from the Hooker and Margulies vector-dyadic equations for the multiple-rigid-body tree, identical equations emerge from each of four quite different derivation procedures.

Likins, P. W.↗

Connective stability of competitive equilibrium

The purpose of this paper is to derive necessary and sufficient conditions for the connective stability of nonlinear matrix systems described by the equation x-dot = A(t, x) x, where the matrix A(t, x) has time-varying nonlinear elements. The results obtained can be used to study the stability of competitive equilibrium in fields as diverse as economics and engineering, model ecosystems, and the arms race.-

Siljak, D. D.↗

Attitude dynamics simulation subroutines for systems of hinge-connected rigid bodies with nonrigid appendages

Three computer subroutines designed to solve the vector-dyadic differential equations of rotational motion for systems that may be idealized as a collection of hinge-connected rigid bodies assembled in a tree topology, with an optional flexible appendage attached to each body are reported. Deformations of the appendages are mathematically represented by modal coordinates and are assumed small. Within these constraints, the subroutines provide equation solutions for (1) the most general case of unrestricted hinge rotations, with appendage base bodies nominally rotating at a constant speed, (2) the case of unrestricted hinge rotations between rigid bodies, with the restriction that those rigid bodies carrying appendages are nominally nonspinning, and (3) the case of small hinge rotations and nominally nonrotating appendages. Sample problems and their solutions are presented to illustrate the utility of the computer programs.

Fleischer, G. E.↗

Skylab observations of X-ray loops connecting separate active regions

One hundred loops interconnecting 94 separate active solar regions detectable in soft X-rays were identified during the Skylab mission. While close active regions are commonly interconnected with loops, the number of such interconnections decreases steeply for longer distances; the longest interconnecting loop observed in the Skylab data connected regions separated by 37 deg. Several arguments are presented which support the point of view that this is the actual limit of the size of magnetic interconnections between active regions. No sympathetic flares could be found in the interconnected regions. These results cast doubt on the hypothesis that accelerated particles can be guided in interconnecting loops from one active region to another over distances of 100 deg or more and eventually produce sympathetic flares in them.

Chase, R. C.↗

Direct-connect tests of hydrogen-fueled supersonic combustors

Direct-connect tests of hydrogen-fueled supersonic combustors were performed using arc-heated air at combustor inlet Mach numbers of 2.9 to 3.2. Various axisymmetric combustor geometries of 5.89 and 6.96 cm (inner diameter) inlet were investigated; the fuel was injected from the wall either from a ring of equally spaced holes normal to the air stream, or from a circumferential slot oriented 45 deg downstream. The hole-type injectors consistently gave better results. The effects of various parameters are examined, and the performance comparison procedure is described. A theoretical model of the supersonic combustion process which includes a precombustion shock-compression is used to explain the character of the observed pressure distributions and to assess the effects of the measured heat transfer rates, deduced wall shear, and combustor geometry on performance.

Waltrup, P. J.↗

Quick-connect threaded attachment joint

Joint is self-aligning and tightens with only sixty-five degrees of rotation for quick connects and disconnects. Made of injection-molded plastics or cast or machined aluminum, joint can carry wires, tubes, liquids, or gases. When two parts of joint are brought together, their shapes align them. Small projections on male section and slots on female section further aid alignment; slight rotation of male form engages projections in slots. At this point, threads engage and male section is rotated until joint is fully engaged.

Lucy, M. H.↗

Direct-connect test of a hydrogen-fueled three-strut injector for an integrated modular scramjet engine

The study aims at illustrating the effects of strut and injector interactions and strut wakes not totally simulated in previous, less complex, direct-connect hardware. In addition, the influence of the relative location of the injectors on opposite sides of each strut and the effect of injector spacing are evaluated. It is shown that better mixing efficiency is attained by locating the fuel injectors on opposite sides of a strut so that the jets come together, rather than being staggered, in the strut wake. It is not possible to determine the combustion efficiency by means of a one-dimensional analysis of the wall pressure.

Mcclinton, C. R.↗

Hinge-connected rigid bodies

Package of subroutines solve minimum dimension sets of discrete coordinate equations of motion for arbitrary number of hinge-connected rigid bodies assembled in tree topology.

Fleischer, C. E.↗

Economical solder connections to thin films

Soldering procedure, successfully tested for attaching leads to silicon solar cells, cover-glasses, is simple, inexpensive, and very effective in forming stable connection. Procedure uses solder of indium alloyed with either silver or tin.

Bass, J. A.↗

Crimped thermocouple connections

When proper procedures are followed, hand crimping tool makes reliable, low-cost thermocouple connections. Procedure reduces time and expense of splicing solid and stranded platinum thermocouple wires.

Billington, K. L.↗