Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “eddy current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

“Gray Zone” Simulations Using a Three-Dimensional Planetary Boundary Layer Parameterization in the Weather Research and Forecasting Model

Abstract Generating accurate weather forecasts of planetary boundary layer (PBL) properties is challenging in many geographical regions, oftentimes due to complex topography or horizontal variability in, for example, land characteristics. While recent advances in high-performance computing platforms have led to an increase in the spatial resolution of numerical weather prediction (NWP) models, the horizontal gridcell spacing (Δ x ) of many regional-scale NWP models currently fall within or are beginning to approach the gray zone (i.e., Δ x ≈ 100–1000 m). At these gridcell spacings, three-dimensional (3D) effects are important, as the most energetic turbulent eddies are neither fully parameterized (as in traditional mesoscale simulations) nor fully resolved [as in traditional large-eddy simulations (LES)]. In light of this modeling challenge, we have implemented a 3D PBL parameterization for high-resolution mesoscale simulations using the Weather Research and Forecasting Model. The PBL scheme, which is based on the algebraic model developed by Mellor and Yamada, accounts for the 3D effects of turbulence by calculating explicitly the momentum, heat, and moisture flux divergences in addition to the turbulent kinetic energy. In this study, we present results from idealized simulations in the gray zone that illustrate the benefit of using a fully consistent turbulence closure framework under convective conditions. While the 3D PBL scheme reproduces the evolution of convective features more appropriately than the traditional 1D PBL scheme, we highlight the need to improve the turbulent length scale formulation. Significance Statement The spatial resolution of weather models continues to increase at a rapid rate in accordance with the enhancement of computing power. As a result, smaller-scale atmospheric features become more explicitly resolved. However, most numerical models still ignore the impact of horizontal weather variations on boundary layer flows, which becomes more important at these smaller spatial scales. To address this issue, we have implemented a new modeling approach, using fundamental principles, which accounts for horizontal variability. Our results show that including three-dimensional effects of turbulence is necessary to achieve realistic boundary layer characteristics. This novel technique may be useful for many applications including complex terrain flows, pollutant dispersion, and surface–atmosphere interaction studies.

Juliano, Timothy W.↗

Towards parallel I/O in finite element simulations

I/O issues in finite element analysis on parallel processors are addressed. Viable solutions for both local and shared memory multiprocessors are presented. The approach is simple but limited by currently available hardware and software systems. Implementation is carried out on a CRAY-2 system. Performance results are reported.

Farhat, Charbel↗

Step edge influence on barrier height and contact area in vertical heterojunctions between epitaxial graphene and n-type 4H-SiC

Vertical rectifying contacts of epitaxial graphene grown by Si sublimation on the Si-face of 4H-SiC epilayers were investigated. Forward bias preferential conduction through the step edges was correlated by linear current density normalization. This phenomenon was observed on samples with 2.7–5.8 monolayers of epitaxial graphene as determined by X-ray photoelectron spectroscopy. A modified Richardson plot was implemented to extract the barrier height (0.81 eV at 290 K, 0.99 eV at 30 K) and the electrically dominant SiC step length of a Ti/Al contact overlapping a known region of approximately 0.52 μm wide SiC terraces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluating Large-Eddy Simulations of Boundary-Layer Cloud Response to Climate Change using MAGIC Observations

Over the cool waters off California, a persistent and extensive deck of low-lying clouds forms atop a shallow, turbulent layer of moist air extending 500-2000 meters above the ocean, above which the air is much warmer and drier. Its west edge varies with weather and season and is typically half way to Hawaii. This cloud deck and similar cloud decks elsewhere reflect sunlight back to space, cooling the underlying ocean and indeed the entire planet. They must be accurately represented by a climate model to correctly simulate our current climate or future global warming. Most climate models suggest these cloud decks will thin and break up in a warmer CO 2 -enriched climate, so extra sunlight would reach the ocean surface and amplify warming worldwide. But these models have difficulty accurately simulating the cloud thickness and extent because the turbulent cloud-forming air currents are much too small to be simulated by their coarse computational grid. In 2012-2013, the DOE Atmospheric Radiation Measurement MAGIC program instrumented a container ship transiting between California and Hawaii to observe clouds and rain, small particles (aerosols), and weather conditions. Data were obtained from 20 4-6 day cruises in each direction. This study tested whether a sophisticated ‘large-eddy simulation’ (LES) of the turbulent air motions that create the clouds in this region accurately predicts the variations in cloud properties seen across the different cruises. If so, that model is more believable for predicting cloud changes in this region in a future warmer climate. Our LES used a numerical mesh over a 6.4x6.4 km region with 50 m horizontal and 5 m vertical grid spacing to simulate the cloud-forming eddies and the sharp overlying transition between moist and dry air. To better compare with MAGIC observations, we configured our model to simulate a region that moved along with the ship. We used a weather forecast model to specify effects of the large-scale air flow. We compared our results with balloon ascents, a radar and other instruments pointed upward at the clouds, measurements of downward sunlight and infrared radiation, aerosols, and weather variables for all suitable cruise periods. Our LES was remarkably skillful in predicting the cloudiness variations measured by the ship. MAGIC also sampled mesoscale cells, regions of cloud thickening and thinning over distances of 10-50 km. An LES run over a larger region 100 km on a side shows these cells form spontaneously, enhanced by strong radiative heat loss at the cloud tops.

54 ENVIRONMENTAL SCIENCES↗

Optimization of magnetic amplification by flow constraints in turbulent liquid sodium

Direct measurements of the vector turbulent emf in a driven two-vortex flow of liquid sodium were performed in the Madison Dynamo Experiment [K. Rahbarnia et al., Astrophys. J. 759, 80 (2012)]. The measured turbulent emf is anti-parallel with the mean current and is almost entirely described by an enhanced resistivity, which increases the threshold for a kinematic dynamo. We have demonstrated that this enhanced resistivity can be mitigated by eliminating the largest-scale eddies through the introduction of baffles. By tailoring the flow to reduce large-scale components and control the helical pitch, we have reduced the power required to drive the impellers, doubled the magnetic flux generated by differential rotation, and increased the decay time of externally applied magnetic fields. Despite these improvements, the flows remain sub-critical to the dynamo instability due to the reemergence of turbulent fluctuations at high flow speeds.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NEONiso R Package, versions greater than 0.5.2

Carbon fluxes in terrestrial ecosystems and their response to environmental change are a major source of uncertainty in the modern carbon cycle. The National Ecological Observatory Network (NEON) presents the opportunity to merge eddy covariance (EC)-derived fluxes with CO2 isotope ratio measurements to gain insights into carbon cycle processes. Collected continuously and consistently across >40 sites, NEON EC and isotope data facilitate novel integrative analyses. However, currently provisioned atmospheric isotope data are uncalibrated, greatly limiting ability to perform cross-site analyses. Here, we present two approaches to calibrating NEON CO2 isotope ratios, along with an R package to calibrate NEON data. We find that calibrating CO2 isotopologues independently yields a lower d13C bias (<0.05‰) and higher precision (<0.40‰) than directly correcting d13C with linear regression (bias: <0.11‰, precision: 0.42‰), but with slightly higher error and lower precision in calibrated CO2 mole fraction. The magnitude of the corrections to d13C and CO2 mole fractions vary substantially by site, underscoring the need for users to apply a consistent calibration framework to data in the NEON archive. Post-calibration data sets show that site mean annual d13C correlates negatively with precipitation, temperature, and aridity, but positively with elevation. Forested and agricultural ecosystems exhibit larger gradients in CO2 and d13C than other sites, particularly during the summer and at night. The overview and analysis tools developed here will facilitate cross-site analysis using NEON data, provide a model for other continental-scale observational networks, and enable new advances leveraging the isotope ratios of specific carbon fluxes.

Fiorella, Richard↗

Energy Exascale Earth System Model v2.1.0

First release of version 2.1 of the Energy Exascale Earth System Model. [ATM] The atmosphere component remains EAM. There are no major changes in the default configuration since 2.0. New features include: A semi-lagrangian tracer transport for theta-l dycore, a new algorithm for finding the tropopause, new RRM mesh configurations. Add and update SSP370 and SSP585 cases. Restore the FIDEAL case. [LAND] The land component is ELM. There are no major changes in the default configuration since 2.0. Several option features have been added including: implementation of topography-based subgrid structure (topounits) and accompanying parameterizations and atmospheric forcing downscaling methods; a new plant hydraulics scheme; two-way land-river hydrological coupling through the infiltration of floodplain water; an implementation of perennial crops; updates to the SNICAR-AD snow radiative transfer model; and implementation of soil erosion and sediment yield in ELM-Erosion. Each of these new changes is modular in design and can be turned on or off as the user specifies; they are currently being tested in different “BGC” configurations. [OCEAN] The ocean component remains MPAS-Ocean. Major change since version 2.0 include the addition of the Fox-Kemper et al. 2011 parameterization for submesocale eddies, a correction for barotropic thickness consistency that reduces divergence noise, and the addition of an ocean carbon conservation analysis member. [SEAICE] The sea-ice component remains MPAS-Seaice. Major changes since version 2.0 include: A correction to how shortwave parameters are interpolated in the snicar-ad 5-band radiation scheme, the addition of a sea ice carbon conservation analysis member, updates to the default sea ice biogeochemistry namelist parameters to be consistent with version 2.0 improvements to nitrogen cycling and a correction in the ice-ocean dissolved organic nitrogen coupling. [LAND ICE] The land-ice component remains MPAS-Albany-landIce (MALI). Major changes since 2.0 include an update to the MALI version and the Greenland mesh.[RIVER] The river model is MOSART. There are no major changes in the default configuration since 2.0. A major new optional feature is two-way river-ocean hydrological coupling between MOSART and MPAS-O. This change can be turned on or off as the user specifies, and is being tested in different configurations. [COUPLER] The coupler remains cpl7/MCT. Major changes since version 2.0 include: Carbon budget calculated when heat/water budgets active. Fix a bug in land-atm fluxes for tri-grid configurations. [OTHER] a small bug in the zenith angle calculation was fixed in the data models.

ECP↗

Portable nitrous oxide sensor for understanding agricultural and soil emissions

Nitrous oxide (N2O) is the third most important greenhouse gas (GHG,) with an atmospheric lifetime of ~114 years and a global warming impact ~300 times greater than that of carbon dioxide. The main cause of nitrous oxide’s atmospheric increase is anthropogenic emissions, and over 80% of the current global anthropogenic flux is related to agriculture, including associated land-use change. An accurate assessment of N2O emissions from agriculture is vital not only for understanding the global N2O balance and its impact on climate but also for designing crop systems with lower GHG emissions. Such assessments are currently hampered by the lack of instrumentation and methodologies to measure ecosystem-level fluxes at appropriate spatial and temporal scales. Southwest Sciences and Princeton University are developing and testing new open-path eddy covariance instrumentation for continuous and fast (10 Hz) measurement of nitrous oxide emissions. An important advance, now being implemented, is the use of new mid-infrared laser sources that enable the development of exceptionally low power (<10 W) compact instrumentation that can be used even in remote sites lacking in power. The instrumentation will transform the ability to measure and understand ecosystem-level nitrous oxide fluxes. The Phase II results included successful extended field testing of prototype flux instruments, based on quantum cascade lasers, in collaboration with Michigan State University. Results of these tests demonstrated a flux detection limit of 5 µg m-2 s-1 and showed excellent agreement and correlation with measurements using chamber techniques. Initial tests of an instrument using an interband cascade laser (ICL) were performed, verifying that an order of magnitude reduction in instrument power requirements can be realized. These results point toward future improvements and testing leading to introduction of a commercial open path instrument for N2O flux measurements that is truly portable and cost-effective. The technology developed on this project is especially groundbreaking as it could be widely applied across FLUXNET and AmeriFlux sites (>1200 worldwide) for direct measurements of N2O exchange. The technology can be more broadly applied to gas monitoring requirements in industry, environmental monitoring, health and safety, etc.

47 OTHER INSTRUMENTATION↗

Complex Dynamic Flows in Solar Flare Sheet Structures

Observations of high-energy emission from solar flares often reveal the presence of large sheet-like structures, sometimes extending over a space comparable to the Sun's radius. Given that these structures are found between a departing coronal mass ejection and the post-eruption flare arcade, it is natural to associate the structure with a current sheet; though the relationship is unclear. Moreover, recent high-resolution observations have begun to reveal that the motions in this region are highly complex, including reconnection outflows, oscillations, and apparent wakes and eddies. We present a detailed first look at the complicated dynamics within this supra-arcade plasma, and consider implications for the interrelationship between the plasma and its embedded magnetic field.

McKenzie, David E.↗

CACTI Radar b1 Processing: Corrections, Calibrations, and Processing Report

The U.S. Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) user facility deployed a large number of instruments to a region nearby the Sierra de Córdobas mountains in Argentina as part of the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign (1). During this campaign, four radars were installed at a site outside of Villa Yacanto as shown in Figure 1. As part of a post-campaign effort to improve the usability of these data, a significant activity was undertaken towards the calibration, correction, and improvement of the data quality of these radar datastreams. This process in ARM nomenclature is referred to as generating a “b1” datastream. While these “b1” standards may imply different corrections or standards for various ARM instruments, for radars it refers to a datastream that has been calibrated (and cross-calibrated), including a serious effort to deliver the highest-quality (well-characterized) data possible. This report details (i) the status/quality of the original “a1” (raw) data, (ii) the corrections and calibrations that are applied to generate these b1 datastreams, (iii) the details of the applied algorithms and how radar offset/calibration numbers were determined for the eventual corrections, and (iv) the new and flexible plug-in-based processing system designed during CACTI for radar b1 activities (current, future) that interfaces with ARM’s Data Integrator (ADI) and high-performance computing (HPC) system.

47 OTHER INSTRUMENTATION↗

Independent Technical Review of the X-740 Groundwater Remedy, Portsmouth, Ohio: Technical Evaluation and Recommendations

Two major remedial campaigns have been applied to a plume of trichloroethene (TCE) contaminated groundwater near the former X-740 facility at the Portsmouth Gaseous Diffusion Plant in Piketon Ohio. The two selected technologies, phytoremediation using a stand of hybrid poplar trees from 1999-2007 and in situ chemical oxidation using modified Fenton's Reagent from 2008-2009, have proven ineffective in achieving remedial action objectives (RAOs). The 'poor' performance of these technologies is a direct result of site specific conditions and the local contaminant hydrogeology. Key among these challenges is the highly heterogeneous subsurface geology with a thin contaminated aquifer zone (the Gallia) - the behavior of the contamination in the Gallia is currently dominated by slow release of TCE from the clay of the overlying Minford formation, from the sandstone of the underlying Berea formation, and from clayey layers within the Gallia itself. In response to the remediation challenges for the X-740 plume, the Portsmouth team (including the US Department of Energy (DOE), the site contractor (CDM), and the Ohio Environmental Protection Agency (OEPA)) is evaluating the feasibility of remediation at this site and identifying specific alternatives that are well matched to site conditions and that would maximize the potential for achieving RAOs. To support this evaluation, the DOE Office of Groundwater and Soil Remediation (EM-32) assembled a team of experts to serve as a resource and provide input and recommendations to Portsmouth. Despite the challenging site conditions and the failure of the previous two remediation campaigns to adequately move the site toward RAOs, the review team was unanimous in the conclusion that an effective combination of cost effective technologies can be identified. Further, the team expressed optimism that RAOs can be achieved if realistic timeframes are accepted by all parties. The initial efforts of the review team focused on reviewing the site history and data and organizing the information into a conceptual model and findings to assist in evaluating the potential of alternative remediation technologies. Examples of the key conceptual findings of the EM-32 review team were: (1) The Gallia represents the most practical target for deployment of in situ remediation treatment reagents - injection/extraction focused in this zone would provide maximum lateral impacts with minimal potential risk of failure or adverse collateral impacts. (2) The slow release of TCE from clay and sandstone into the Gallia represent a long term source of TCE that can re-contaminate the Gallia in the future - technologies that effectively treat the permeable portions of the Gallia, but do not leave residual treatment capacity in the system are unlikely to achieve long term remedial action objectives. CDM, the site contractor, provided important and useful information documenting the status and preliminary results of the on-site technology alternative evaluation. In the CDM evaluation, potential technologies were either retained (or screened out) in two preliminary evaluation phases and a detailed evaluation was performed on the five alternatives that were retained into the final 'detailed analysis' phase. The five alternatives that were included in the detailed analysis were: (1) hydraulic fracturing with EHC (a solid bioremediation amendment), (2) enhanced anaerobic bioremediation, (3) in situ chemical oxidation, (4) electrical resistance heating, and (5) reactive barriers. In several cases, two or three variants were separately evaluated. The review team found the CDM effort to be generally credible and reasonable. Thus, the review team focused on providing additional considerations and inputs to Portsmouth and on amending and refining the alternatives in ways that might improve performance and/or reduce costs. The Department of Energy Portsmouth Paducah Project Office requested assistance from Department of Energy Office of Environmental Management (EM-32) to provide an independent technical panel to review previous and ongoing remedial activities designed to address TCE contamination in groundwater at X-740. In 1999, a corrective action was implemented at X-740 to address contamination in the groundwater. The DOE planted poplar trees over 2.6 acres of the groundwater plume. After several years of groundwater monitoring, the results indicated that the benefits of phytoremediation were limited and insufficient to meet remedial objectives. In 2007, an alternative remedial strategy based on in situ oxidative treatment was negotiated with Ohio EPA. During FY2008, three treatment phases of chemical oxidation were completed. The general charter for the independent technical review team is to review the results of s previous and ongoing remedial actions to determine whether the current strategy will be effective in meeting the end points specified in the regulatory work plan.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Impact of Parameterized Lateral Mixing on the Antarctic Circumpolar Current in a Coupled Climate Model

This study examines the impact of changing the lateral diffusion coefficient ARedi on the transport of the Antarctic Circumpolar Current (ACC). The lateral diffusion coefficient ARedi is poorly constrained, with values ranging across an order of magnitude in climate models. The ACC is difficult to accurately simulate, and there is a large spread in eastward transport in the Southern Ocean (SO) in these models. This paper examines how much of that spread can be attributed to different eddy parameterization coefficients. A coarse-resolution, fully coupled model suite was run with A Redi = 400, 800, 1200, and 2400 m 2 s -1 . Additionally, two simulations were run with two-dimensional representations of the mixing coefficient based on satellite altimetry. Relative to the 400 m 2 s -1 case, the 2400 m 2 s -1 case exhibits 1) an 11% decrease in average wind stress from 50° to 65°S, 2) a 20% decrease in zonally averaged eastward transport in the SO, and 3) a 14% weaker transport through the Drake Passage. The decrease in transport is well explained by changes in the thermal current shear, largely due to increases in ocean density occurring on the northern side of the ACC. In intermediate waters these increases are associated with changes in the formation of intermediate waters in the North Pacific. We hypothesize that the deep increases are associated with changes in the wind stress curl allowing Antarctic Bottom Water to escape and flow northward.

54 ENVIRONMENTAL SCIENCES↗

Current-interchange tearing modes: Conversion of interchange-type modes to tearing modes

It is shown that, in addition to usual neoclassical tearing modes, another type of nonclassical tearing mode exists in tokamaks: viz., current-interchange tearing modes (CITMs). CITMs are directly driven by unstable pressure-driven electromagnetic or electrostatic modes of the interchange type (e.g., interchange/ballooning modes, drift waves, etc.) due to the current gradient in tokamaks. Interchange-type modes exchange not only thermal and magnetic energies between flux tubes but also current. In a plasma with a current (or resistivity) gradient, such an interchange can create a current sheet at a mode resonance surface and result in the excitation of CITMs. Note that the interchange mode (i.e., Rayleigh-Taylor instability) is fundamental to tokamak physics. This new theory has an effect on both resistive magnetohydrodynamic stability and transport theories. Instabilities of the interchange type could be directly converted into CITMs, alternative to forming turbulent eddies through nonlinear coupling as in conventional transport theories. In particular, our CITM theory fills in the component in the transport theory of Rechester and Rosenbluth [Phys. Rev. Lett. 40, 38 (1978)] for the origin of magnetic island structure in axisymmetric tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Representing effects of aqueous phase reactions in shallow cumuli in global models

Aqueous phase reactions are important, sometimes dominant (e.g., for SO 2 ), pathways for the oxidation of air pollutants at the local and/or global scale. In many current chemical transport models (CTMs), the transport and aqueous reactions of chemical species are treated as split processes, and the subgrid-scale heterogeneity between cloudy and environmental air is not considered. Here using large eddy simulation (LES) with idealized aqueous reactions mimicking the oxidation of surface-originated SO 2 by H 2 O 2 in shallow cumuli, we show that the eddy diffusivity mass flux (EDMF) approach with a bulk plume can represent those processes quite well when entrainment/detrainment rates and eddy diffusivity are diagnosed using a conservative thermodynamic variable such as total water content. The reason is that a typical aqueous reaction such as SO 2 aqueous oxidation is relatively slow compared to the in-cloud residence time of air parcels in shallow cumuli. As a result, the surface-originated SO 2 is well correlated with and behaves like conservative thermodynamic variables that also have sources at the surface. Experiments with various reaction rate constants and relative abundances of SO 2 and H 2 O 2 indicate that when the reaction timescale approaches the in-cloud residence time of air parcels, the errors of the bulk plume approach start to increase. Finally, treating chemical tracer transport and aqueous reaction as split processes leads to significant errors, especially when the reaction is fast compared to the in-cloud residence time. Overall, the EDMF approach shows large improvement over the CTM-like treatments in matching the LES results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO 2 uptake is offset by CH 4 and N 2 O emissions in a poplar short-rotation coppice

The need for renewable energy sources will lead to a considerable expansion in the planting of dedicated fast-growing biomass crops across Europe. These are commonly cultivated as short-rotation coppice (SRC), and currently poplar ( Populus spp.) is the most widely planted. In this study, we report the greenhouse gas (GHG) fluxes of carbon dioxide (CO 2 ), methane (CH 4 ) and nitrous oxide (N 2 O) measured using eddy covariance technique in an SRC plantation for bioenergy production. Measurements were made during the period 2010–2013, that is, during the first two rotations of the SRC. The overall GHG balance of the 4 years of the study was an emission of 1.90 (±1.37) Mg CO 2 eq ha -1 ; this indicated that soil trace gas emissions offset the CO 2 uptake by the plantation. CH 4 and N 2 O contributed almost equally to offset the CO 2 uptake of -5.28 (±0.67) Mg CO2eq ha -1 with an overall emission of 3.56 (±0.35) Mg CO 2 eq ha -1 of N 2 O and of 3.53 (±0.85) Mg CO 2 eq ha-1 of CH 4 . N 2 O emissions mostly occurred during one single peak a few months after the site was converted to SRC; this peak comprised 44% of the total N 2 O loss during the two rotations. Accurately capturing emission events proved to be critical for deriving correct estimates of the GHG balance. The nitrogen (N) content of the soil and the water table depth were the two drivers that best explained the variability in N 2 O and CH 4 , respectively. Here, this study underlines the importance of the ‘non-CO 2 GHGs’ on the overall balance. Further long-term investigations of soil trace gas emissions should monitor the N content and the mineralization rate of the soil, as well as the microbial community, as drivers of the trace gas emissions.

54 ENVIRONMENTAL SCIENCES↗

Status of Turbulence Modeling for Hypersonic Propulsion Flowpaths

This report provides an assessment of current turbulent flow calculation methods for hypersonic propulsion flowpaths, particularly the scramjet engine. Emphasis is placed on Reynolds-averaged Navier-Stokes (RANS) methods, but some discussion of newer meth- ods such as Large Eddy Simulation (LES) is also provided. The report is organized by considering technical issues throughout the scramjet-powered vehicle flowpath including laminar-to-turbulent boundary layer transition, shock wave / turbulent boundary layer interactions, scalar transport modeling (specifically the significance of turbulent Prandtl and Schmidt numbers) and compressible mixing. Unit problems are primarily used to conduct the assessment. In the combustor, results from calculations of a direct connect supersonic combustion experiment are also used to address the effects of turbulence model selection and in particular settings for the turbulent Prandtl and Schmidt numbers. It is concluded that RANS turbulence modeling shortfalls are still a major limitation to the accuracy of hypersonic propulsion simulations, whether considering individual components or an overall system. Newer methods such as LES-based techniques may be promising, but are not yet at a maturity to be used routinely by the hypersonic propulsion community. The need for fundamental experiments to provide data for turbulence model development and validation is discussed.

Georgiadis, Nicholas J.↗

Comparison of entrainment rates from a tank experiment with results using the one-dimensional turbulence model.

Recent work suggests that cloud effects remain one of the largest sources of uncertainty in model-based estimates of climate sensitivity. In particular, the entrainment rate in stratocumulus-topped mixed layers needs better models. More than thirty years ago a clever laboratory experiment was conducted by McEwan and Paltridge to examine an analog of the entrainment process at the top of stratiform clouds. Sayler and Breidenthal extended this pioneering work and determined the effect of the Richardson number on the dimensionless entrainment rate. The experiments gave hints that the interaction between molecular effects and the one-sided turbulence seems to be crucial for understanding entrainment. From the numerical point of view large-eddy simulation (LES) does not allow explicitly resolving all the fine scale processes at the entrainment interface. Direct numerical simulation (DNS) is limited due to the Reynolds number and is not the tool of choice for parameter studies. Therefore it is useful to investigate new modeling strategies, such as stochastic turbulence models which allow sufficient resolution at least in one dimension while having acceptable run times. We will present results of the One-Dimensional Turbulence stochastic simulation model applied to the experimental setup of Sayler and Breidenthal. The results on radiatively induced entrainment follow quite well the scaling of the entrainment rate with the Richardson number that was experimentally found for a set of trials. Moreover, we investigate the influence of molecular effects, the fluids optical properties, and the artifact of parasitic turbulence experimentally observed in the laminar layer. In the simulations the parameters are varied systematically for even larger ranges than in the experiment. Based on the obtained results a more complex parameterization of the entrainment rate than currently discussed in the literature seems to be necessary.

54 ENVIRONMENTAL SCIENCES↗

Satellite observations of mesoscale features in lower Cook Inlet and Shelikof Strait, Gulf of Alaska

The Seasat satellite launched in Summer 1978 carried a synthetic aperture radar (SAR). Although Seasat failed after 105 days in orbit, it provided observations that demonstrate the potential to examine and monitor upper oceanic processes. Seasat made five passes over lower Cook Inlet and Shelikof Strait, Alaska, during Summer 1978. SAR images from the passes show oceanographic features, including a meander in a front, a pair of mesoscale eddies, and internal waves. These features are compared with contemporary and representative images from a satellite-borne Advanced Very High Resolution Radiometer (AVHRR) and Coastal Zone Color Scanner (CZCS), with water property data, and with current observations from moored instruments. The results indicate that SAR data can be used to monitor mesoscale oceanographic features.

Schumacher, James D.↗