SEARCH · Engineering Papers

Results for “cost function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Assembly and Integration Status of a High Fidelity Ground Test Bed for the Water Processor Assembly

The Water Recovery System (WRS) is a critical component of life support aboard the International Space Station (ISS) and will play an essential role in future missions beyond Low Earth Orbit (LEO). Its primary functional units – the Urine Processor Assembly (UPA), Brine Processor Assembly (BPA), and Water Processor Assembly (WPA) – must be evaluated for extended operation, dormancy resilience, material obsolescence, and reliability under exploration-driven constraints. Ground testing is vital for developing these technologies and generating statistically relevant reliability assessments, which requires extended runtime under integrated, Flight-like conditions. Currently, no high-fidelity, fully integrated WPA ground test bed exists to support these objectives. To address this gap, NASA is developing a WPA test bed at Marshall Space Flight Center (MSFC) that combines downgraded ISS flight hardware with functionally flight-like components in a cost-effective configuration while maintaining priority hardware investigations. This paper describes the current status of hardware assembly and integration, outlines key challenges such as simulating microgravity effects and mitigating obsolescence, and presents future test objectives including software development, reliability assessments, dormancy studies, and exploration-oriented upgrades.

Mary-Elizabeth Davis↗

NASA NTRSDate not supplied

Assembly and Integration Status of a High Fidelity Ground Test Bed for the Water Processor Assembly

Water Processor Assembly↗

DOE OSTI2023

Modified Virtual Oscillator-Based Operation of Grid-Forming Converters with Single Voltage Sensor: Preprint

This paper proposes a virtual oscillator-based control architecture for a grid-forming converter with an inner current control loop. In general, the virtual oscillator is based on a Lienard type of oscillator equation with a cubic nonlinearity. A virtual oscillator alone cannot accommodate unbalanced or harmonic mitigation while operating converters in grid-forming mode. Therefore, to accomplish better tracking performance, incorporating the provision for nonlinear and/or unbalanced loads, an inner current control loop is utilized that is based on the Lyapunov energy function type control architecture. To reduce the overall cost of implementation and ensure proper phase difference in the generated voltages, the implemented virtual oscillator operates with only one voltage feedback from the point of common coupling. To verify the effectiveness of the proposed approach, the overall system has been modeled in MATTLAB/Simulink and PLECS domain. This paper also presents case studies showing the successful production of low harmonic load voltages under nonideal loading conditions, along with other important results.

dual second order generalized integrator↗

DOE OSTI2025

Large Area Airborne Contamination Monitoring

The individual components of a Large Area Airborne Contamination Monitoring (LAACM) system have been demonstrated as functional and the concept of a low-cost, rapidly deployable, and rapidly expandable system has been validated. All components of a previously demonstrated system were re-evaluated. Based on this evaluation, recommendations were made for air collection equipment, scintillating material was synthesized and optimized for application, and improved images were acquired. A preliminary concept of operations was developed, outlining the need for an automated scintillation application system and software for data acquisition and analysis. The work conducted under this program in FY24 has raised the Technology Readiness Level (TRL) of the LAACM from TRL 3 to TRL 4.

Whiteside, Tad S. [Savannah River National Laborat↗

NASA NTRS2002

Internet Data Delivery for Future Space Missions

Ongoing work at National Aeronautics and Space Administration Goddard Space Flight Center (NASA/GSFC), seeks to apply standard Internet applications and protocols to meet the technology challenge of future satellite missions. Internet protocols and technologies are under study as a future means to provide seamless dynamic communication among heterogeneous instruments, spacecraft, ground stations, constellations of spacecraft, and science investigators. The primary objective is to design and demonstrate in the laboratory the automated end-to-end transport of files in a simulated dynamic space environment using off-the-shelf, low-cost, commodity-level standard applications and protocols. The demonstrated functions and capabilities will become increasingly significant in the years to come as both earth and space science missions fly more sensors and as the need increases for more network-oriented mission operations. Another element of increasing significance will be the increased cost effectiveness of designing, building, integrating, and operating instruments and spacecraft that will come to the fore as more missions take up the approach of using commodity-level standard communications technologies. This paper describes how an IP (Internet Protocol)-based communication architecture can support all existing operations concepts and how it will enable some new and complex communication and science concepts. The authors identify specific end-to-end data flows from the instruments to the control centers and scientists, and then describe how each data flow can be supported using standard Internet protocols and applications. The scenarios include normal data downlink and command uplink as well as recovery scenarios for both onboard and ground failures. The scenarios are based on an Earth orbiting spacecraft with downlink data rates from 300 Kbps to 4 Mbps. Included examples are based on designs currently being investigated for potential use by the Global Precipitation Measurement (GPM) mission.

Rash, James↗

NASA NTRS1993

Analysis and effects of the advanced solid rocket motor on the Space Shuttle elements

This interim final report summarizes the activities and major accomplishments under NASA/MSFC Contract NAS8-39235 for the initial two year contractual effort beginning October 1, 1991, and ending September 30, 1993. It is not intended as an exhaustive treatment or review of any particular technical issue which was addressed during this two-year period, but does provide an overview of the many induced environment studies and test support activities undertaken by REMTECH and its subcontractors during this two-year period. The initial scope of work has been pursued vigorously through this two-year period by separating the effort into five functional areas. The five functional areas are ascent plume radiation, ascent plume convection, ascent aerodynamic heating, launch stand environments, and reentry heating. A work breakdown structure (WBS) for each functional area was devised to permit nearly autonomous activities within each functional responsibility while maintaining commonality in reporting procedures and cost accounting. The contract was modified 11 times to provide incremental funding and to expand the scope of work. Additional work breakdown structure was incorporated to meet the expanded scope. A contract chronology is provided in Section 2. The initial scope of work, expanded scope, and corresponding WBS designation are described in Section 3. A summary review of major accomplishments is also provided in Section 4 to show the breadth of activities and extent of reporting. Reports, meetings, test activities, and other accomplishments within each functional area are also summarized by WBS heading in the appendices.

Source record↗

DOE OSTI2020

Land Use in Computable General Equilibrium Models

Constant Elasticity of Transformation (CET) functions are widely used to allocate land across uses in Computable General Equilibrium (CGE) models. These models fail to maintain area of land in balance. Several ways have been used or offered to fix this problem. This paper first examines the extent to which the CET approach may generate imbalances in area of land and identifies determinants of such imbalances. It then evaluates the merits, properties, and welfare impacts of the available approaches that restore area of land in balance. We show that heterogeneity in land prices (land rents) is the main source of imbalance in area of land, not the curvature of the CET function. Furthermore, we show that the available approaches that restore area of land in balance either introduce ad hoc adjustments in land allocation or undermine the conventional welfare assessments of the CET results and ignore the opportunity costs of land transformation. The CGE models which applied stochastic productivity distribution functions to allocate land among uses maintain area of land in balance, but they suffer from important limitations and ignore costs of land transformation.

Taheripour, Farzad↗

NASA NTRS1983

OPTIM: Computer program to generate a vertical profile which minimizes aircraft fuel burn or direct operating cost. User's guide

A profile of altitude, airspeed, and flight path angle as a function of range between a given set of origin and destination points for particular models of transport aircraft provided by NASA is generated. Inputs to the program include the vertical wind profile, the aircraft takeoff weight, the costs of time and fuel, certain constraint parameters and control flags. The profile can be near optimum in the sense of minimizing: (1) fuel, (2) time, or (3) a combination of fuel and time (direct operating cost (DOC)). The user can also, as an option, specify the length of time the flight is to span. The theory behind the technical details of this program is also presented.

Source record↗

NASA NTRS1988

Space Station Freedom operations costs

Measures to reduce the operation costs of the Space Station which can be implemented in the design and development stages are discussed. Operational functions are described in the context of an overall operations concept. The provisions for operations cost responsibilities among the partners in the Space Station program are presented. Cost estimating methodologies and the way in which operations costs affect the design and development process are examined.

Accola, Anne L.↗

NASA NTRS1981

Silicon Ingot Casting - Heat Exchanger Method (HEM). Multi-Wire Slicing - Fixed Abrasive Slicing Technique (Fast). Phase 4 Silicon Sheet Growth Development for the Large Area Sheet Task of the Low-Cost Solar Array Project

The crystallinity of large HEM silicon ingots as a function of heat flow conditions is investigated. A balanced heat flow at the bottom of the ingot restricts spurious nucleation to the edge of the melted-back seed in contact with the crucible. Homogeneous resistivity distribution over all the ingot has been achieved. The positioning of diamonds electroplated on wirepacks used to slice silicon crystals is considered. The electroplating of diamonds on only the cutting edge is described and the improved slicing performance of these wires evaluated. An economic analysis of value added costs of HEM ingot casting and band saw sectioning indicates the projected add on cost of HEM is well below the 1986 allocation.

Schmid, F.↗

DOE OSTI2022

Medium- and heavy-duty value of technology improvement

Improvements in vehicle technology impact the purchase price of a vehicle and its operating cost. In this study, the monetary benefit of a technology improvement includes the potential reduction in vehicle price from using cheaper or smaller components, as well as the discounted value of the fuel cost savings. As technology progresses over time, the value and benefit of improving technology varies as well. In this study, the value of improving a few selected technologies (battery energy density, electric drive efficiency, tire rolling resistance, aerodynamics, light weighting) is studied and the value of the associated cost saving is quantified. The change in saving as a function of time, powertrain selection and vehicle type is also quantified. For example, a 10% reduction in aerodynamic losses is worth $24,222 today but only $8,810 in 2030 in an electric long haul truck. The decrease in value is primarily due to expected battery cost reduction over time. The same loss reduction in a 2030 conventional long haul truck is worth $5,117 and is primarily driven by a reduction in diesel expenditure. For conventional vehicles, the value of technology improvement is likely to increase over time as diesel price is expected to increase over the next decades while for electric vehicles, the value of technology improvement is likely to decrease as battery energy density increases and cost decreases. The study focuses on medium- and heavy-duty applications where cost of driving is of paramount importance. The savings realized from each technology improvement serve as an upper limit for how much can be spent to acquire that improvement in technology.

Freyermuth, Vincent↗

NASA NTRS2001

Accuracy Assessment of Response Surface Approximations for Supersonic Turbine Design

There is a growing trend to employ CFD tools to supply the necessary information for design optimization of fluid dynamics components/systems. Such results are prone to uncertainties due to reasons including discretization. errors, incomplete convergence of computational procedures, and errors associated with physical models such as turbulence closures. Based on this type of information, gradient-based optimization algorithms often suffer from the noisy calculations, which can seriously compromise the outcome. Similar problems arise from the experimental measurements. Global optimization techniques, such as those based on the response surface (RS) concept are becoming popular in part because they can overcome some of these barriers. However, there are also fundamental issues related to such global optimization technique such as RS. For example, in high dimensional design spaces, typically only a small number of function evaluations are available due to computational and experimental costs. On the other hand, complex features of the design variables do not allow one to model the global characteristics of the design space with simple quadratic polynomials. Consequently a main challenge is to reduce the size of the region where we fit the RS, or make it more accurate in the regions where the optimum is likely to reside. Response Surface techniques using either polynomials or and Neural Network (NN) methods offer designers alternatives to conduct design optimization. The RS technique employs statistical and numerical techniques to establish the relationship between design variables and objective/constraint functions, typically using polynomials. In this study, we aim at addressing issues related to the following questions: (1) How to identify outliers associated with a given RS representation and improve the RS model via appropriate treatments? (2) How to focus on selected design data so that RS can give better performance in regions critical to design optimization? (3) How to combine NN and polynomial techniques for improving the accuracy of the RS model?

Papila, Nilay↗

DOE OSTI2020

Locally adaptive activation functions with slope recovery for deep and physics-informed neural networks

Here we propose two approaches of locally adaptive activation functions namely, layer-wise and neuron-wise locally adaptive activation functions, which improve the performance of deep and physics-informed neural networks. The local adaptation of activation function is achieved by introducing a scalable parameter in each layer (layer-wise) and for every neuron (neuron-wise) separately, and then optimizing it using a variant of stochastic gradient descent algorithm. In order to further increase the training speed, an activation slope-based slope recovery term is added in the loss function, which further accelerates convergence, thereby reducing the training cost. On the theoretical side, we prove that in the proposed method, the gradient descent algorithms are not attracted to sub-optimal critical points or local minima under practical conditions on the initialization and learning rate, and that the gradient dynamics of the proposed method is not achievable by base methods with any (adaptive) learning rates. We further show that the adaptive activation methods accelerate the convergence by implicitly multiplying conditioning matrices to the gradient of the base method without any explicit computation of the conditioning matrix and the matrix–vector product. The different adaptive activation functions are shown to induce different implicit conditioning matrices. Furthermore, the proposed methods with the slope recovery are shown to accelerate the training process.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

The influence of alfalfa-switchgrass intercropping on microbial community structure and function

The use of nitrogen fertilizer on bioenergy crops such as switchgrass results in increased costs, nitrogen leaching and emissions of N 2 O, a potent greenhouse gas. Intercropping with nitrogen-fixing alfalfa has been proposed as an environmentally sustainable alternative, but the effects of synthetic fertilizer versus intercropping on soil microbial community functionality remain uncharacterized. Here we analysed 24 metagenomes from the upper soil layer of agricultural fields from Prosser, WA over two growing seasons and representing three agricultural practices: unfertilized switchgrass (control), fertilized switchgrass and switchgrass intercropped with alfalfa. The synthetic fertilization and intercropping did not result in major shifts of microbial community taxonomic and functional composition compared with the control plots, but a few significant changes were noted. Most notably, mycorrhizal fungi, ammonia-oxidizing archaea and bacteria increased in abundance with intercropping and fertilization. However, only betaproteobacterial ammonia-oxidizing bacteria abundance in fertilized plots significantly correlated to N 2 O emission and companion qPCR data. Collectively, a short period of intercropping elicits minor but significant changes in the soil microbial community toward nitrogen preservation and that intercropping may be a viable alternative to synthetic fertilization.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Low cost immobilized amine regenerable solid sorbents

A method of modifying a chemical interaction between a functional group of an immobilized amine in a solid sorbent composition and a compound that chemically interacts with the functional group to reduce the heat required to desorb the compound from the solid sorbent. A method of inhibiting degradation of an immobilized amine in an immobilized amine solid sorbent. Compositions and methods of use of a low-cost regenerable immobilized amine solid sorbent resistant to degradation.

Chuang, Steven S. C.↗

DOE OSTI2024

Efficient Parameterization of Density Functional Tight-Binding for 5 f -Elements: A Th–O Case Study

Density functional tight binding (DFTB) models for f-element species are challenging to parametrize owing to the large number of adjustable parameters. The explicit optimization of the terms entering the semiempirical DFTB Hamiltonian related to f orbitals is crucial to generating a reliable parametrization for f-block elements, because they play import roles in bonding interactions. However, since the number of parameters grows quadratically with the number of orbitals, the computational cost for parameter optimization is much more expensive for the f-elements than for the main group elements. In this work we present a set of efficient approaches for mitigating the hurdle imposed by the large size of the parameter space. A novel group-by-orbital correction functions for two-center bond integrals was developed. With this approach the number of parameters is reduced, and it grows linearly with the number of elements, maintaining the accuracy and the number of parameters, in the case of f elements, by more than 40%. The parameter optimization step was accelerated by means of the mini-batch BFGS method. This method allows parameter optimizations with much larger training sets than other single batch methods. A stochastic optimizer was employed that helped overcome shallow local minima in the objective function. The proposed algorithm was used to parametrize the DFTB Hamiltonian for the Th–O system, which was subsequently applied to the study of ThO 2 nanoparticles. The training set consisted of 6322 unique structures, which is barely feasible with conventional optimization methods. The optimized parameter set, LANL-ThO, displays good agreement with DFT-calculated properties such as energies, forces, and structures for both clusters and bulk ThO 2 . Benefiting from the fewer number of parameters and lower computational costs for objective function evaluations, this new approach shows its potential applications in DFTB parametrization for elements with high angular momentum, which present a challenge to conventional methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2005

Constraining Oceanic Sources and Sinks of CO2 by Inverse Modeling: A First Step Toward Assimilation of In Situ and Remote Data

The primary goal of this collaborative project, lead by Nicholas Gruber at UCLA, is to better quantify the air-sea fluxes of pre-industrial and anthropogenic carbon dioxide CO2 for the global ocean with a newly developed inverse method. The method involves using ocean general circulation models (OGCMs) to characterize the subsurface distribution of tracers injected for different regions of the ocean surface. By linearly combining a series of these basis (or Greens) functions, one should be able to recreate any arbitrary ocean tracer field. In our case, we are using the global database of ocean dissolved inorganic carbon (DIC) from the WOCE/JGOFS global CO2 survey from the 1990s. The observed DIC field has been partitioned into pre-industrial and anthropogenic components using the empirical C* technique. We then solve for an optimal combination of the regional basis functions that best match the two sets observations in a least-squares sense with singular value decomposition. This in turn provides solutions for the regional air-sea CO2 fluxes (pre-industrial and anthropogenic) that are independent of more traditional estimates derived from surface water disequilibria in the partial pressure of CO2 and wind speed gas exchange parameterizations. We are apply the method to a suite of nine different OGCMs to test the robustness of the derived surface fluxes fields to differences in ocean circulation. Together with a collegue Keith Lindsay at NCAR, S. Doney's role in this project was to create the appropriate steady-state and temporally evolving basis functions from the NCAR CSM-1 ocean circulation model. Because of a slow start across the project in defining a common set of experimental protocols, we requested and were given a one year, no cost extension. Both the steady-state and temporally evolving basis functions were delivered to the UCLA group for further analysis. Additional information is included in the original extended abstract.

Doney, Scott↗

DOE OSTI2020

Structure analysis of supported disordered molybdenum oxides using pair distribution function analysis and automated cluster modelling

Molybdenum oxides and sulfides on various low-cost high-surface-area supports are excellent catalysts for several industrially relevant reactions. The surface layer structure of these materials is, however, difficult to characterize due to small and disordered MoO x domains. Here, it is shown how X-ray total scattering can be applied to gain insights into the structure through differential pair distribution function (d-PDF) analysis, where the scattering signal from the support material is subtracted to obtain structural information on the supported structure. MoO x catalysts supported on alumina nanoparticles and on zeolites are investigated, and it is shown that the structure of the hydrated molybdenum oxide layer is closely related to that of disordered and polydisperse polyoxometalates. By analysing the PDFs with a large number of automatically generated cluster structures, which are constructed in an iterative manner from known polyoxometalate clusters, information is derived on the structural motifs in supported MoO x .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗