Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYPOTHESIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Ruthenium supported on silicate and aluminosilicate mesoporous materials applied to selective sugar hydrogenation: Xylose to xylitol

A series of ruthenium-based catalysts supported on a set of silicate and aluminosilicate mesoporous molecular sieves was synthesized and tested in xylose hydrogenation. The materials were characterized in terms of morphology, textural properties, acidity, as well as ruthenium loading, dispersion, and oxidation state. In general, the aluminosilicates-based catalysts displayed a higher activity compared to their respective silicate supports, which can be ascribed to a higher Ru content and dispersion, enhanced by a higher acidity. The most active synthesized catalyst (Ru/Al-MCM-4) displayed an improved performance compared to a commercial Ru/C catalyst due to a better xylitol selectivity. Two modelling approaches were implemented to describe the kinetic rate. The first model was based on the hypothesis that xylose molecules and hydrogen are adsorbed in different active sites on the catalyst surface, while the second model supposes the formation of an intermediate on the catalyst surface that reacts to form xylitol. Both models gave a very good description of the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Insights into convergent evolution of cosexuality in liverworts from the Marchantia quadrata genome

Sex chromosomes are expected to coevolve with their respective sex, potentially disfavoring their co-occurrence as cosexuality evolves. This effect is expected to be stronger where sex chromosomes are restricted to one sex, such as in plants expressing sex in their haploid stage. We assess this hypothesis in liverworts with U/V sex chromosomes, ancestral dioicy, and several independent transitions to monoicy (cosexuality). We report the chromosome-level genome assembly of Marchantia quadrata, which recently evolved monoicy, and perform comparative genomic analyses with its dioicous relative M. polymorpha. We find that monoicy evolved via retention of the V chromosome as a small ninth chromosome, complete loss of the U chromosome, and translocation of key U-linked genes to autosomes, among which the major sex-determining gene (Feminizer) acquired environmental/developmental regulation. Our findings parallel recent observations on Ricciocarpos natans, which evolved monoicy independently, suggesting genetic constraints that may make transitions to monoicy predictable in liverworts.

Potente, Giacomo↗
DOE OSTI2025

Understanding, inhibiting, and engineering membrane transporters with high-throughput mutational screens

Promiscuous membrane transporters play vital roles across domains of life, mediating the uptake and efflux of structurally and chemically diverse substrates. Although many transporter structures have been solved, the fundamental rules of polyspecific transport remain inscrutable. In recent years, high-throughput genetic screens have solidified as powerful tools for comprehensive, unbiased measurements of variant function and hypothesis generation, but have had infrequent application and limited impact in the transporter field. In this primer, we describe the principles of high-throughput screening methods available for studying polyspecific transporters and comment on the necessity and potential of high-throughput methods for deciphering these transporters in particular. We present several screening approaches which could provide a fundamental understanding of the molecular basis of function and promiscuity in transporters. Here, we further posit how this knowledge can be leveraged to design inhibitors that combat multidrug resistance and engineer transporters as needed tools for synthetic biology and biotechnology applications.

EPIs↗
DOE OSTI2023

Can Zn isotopes in sediments record past eutrophication of freshwater lakes? A pilot study at Lake Baldegg (Switzerland)

In this study, the speciation and isotopic composition of Zn were traced across the sediments of a freshwater lake that experienced one hundred years of strong eutrophication, in order to assess the potential of sedimentary Zn isotopes to record such an environmental disturbance. Here, the results indicate that the sedimentary Zn isotope signal varied with the change from pre-eutrophic to eutrophic conditions in the investigated lake. The average δ 66 Zn JMC value of the dominantly allochthonous lithogenic sediments deposited during the pre-eutrophic period was +0.27‰ ±0.05‰ (i.e. similar to the δ 66 Zn JMC value of +0.28‰ ±0.05‰ proposed for Bulk Silicate Earth), while enhanced autochthonous biochemical sedimentation during the eutrophic period resulted in significantly lower δ 66 Zn JMC values down to +0.04‰ ±0.06‰. Synchrotron-based X-ray absorption spectroscopy data revealed a concomitant change in Zn speciation from a dominant fraction of Zn in clay minerals during the pre-eutrophic period to a major fraction of Zn in ZnS during the eutrophic period. A linear regression relating the sedimentary Zn isotope signal to the fraction of Zn in ZnS indicated δ 66 Zn JMC values of +0.27‰ ±0.06‰ and 0.00‰ ±0.08‰ for Zn in clay minerals and in ZnS, respectively. The enrichment of light Zn in ZnS in the eutrophic sediments is tentatively attributed to enhanced biological uptake of light Zn in the water column, which resulted in an enhanced flux of organic-bound Zn towards the sediments and further transformation of organic Zn into ZnS upon biomass mineralization during early diagenesis. This hypothesis is in agreement with the fractionation towards lighter Zn reported for both biological uptake of Zn and ZnS precipitation. The results of this study emphasize the potential of sedimentary Zn isotopes to register past eutrophic periods in freshwater lakes, and thus to serve as a probe of paleo-environmental conditions and/or past land use at the catchment scale.

58 GEOSCIENCES↗
DOE OSTI2023

Formation of hydrocarbons favored by high pressure at subduction zone conditions

Subduction zones enable carbon transport to the deep Earth. Inorganic and organic carbon in fluids released from the subducted slab are important in water-rock interactions. However, the potential role of reduced carbon species in fluids during subduction is still unclear. In particular, the pressure, temperature, and oxidation state conducive to the formation of fluid hydrocarbons are poorly understood. Here we focused on the role of pressure influencing the formation of hydrocarbons using diamond anvil cell experiments starting with 0.5 M Ca-acetate solutions over a broad range of pressures, from 1.6 to 4.6 GPa at temperatures of 300 and 350°C. Droplets of immiscible hydrocarbon fluid coexisting with aqueous carbonate or bicarbonate and crystals of calcite or aragonite were formed at peak pressure and temperature conditions in the experiments. Furthermore, greater quantities of hydrocarbons formed at higher pressure as revealed by measuring the in situ volume percent of the droplets. Measurement of the in situ Raman spectra of the co-existing aqueous solutions and analysis of the peak area ratios of acetate to HCO 3 – showed faster decrease at higher pressure, which indicated that the reactions forming hydrocarbons were accelerated by pressure. Compared to previous Na-acetate experiments at 300°C and 3.0 GPa, this study found hydrocarbons that were more methane-rich and had more propane and less isobutane. In experiments at 350°C, isobutane transformed to one or more aromatic hydrocarbons in an immiscible fluid. The air-dried aromatic hydrocarbons were measured using a UV laser, and show peaks of bitumen. Overall, our study supports the hypothesis that high pressures and high temperatures facilitate the possible occurrence of immiscible hydrocarbon fluids in the deep carbon cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-dimensional isotomics, part 2: Observations of over 100 constraints on methionine's isotome

The abundances of different isotopic forms of a compound, or isotopologues, will vary based on its physical and chemical history. The number of isotopologues increases combinatorically with the size of a molecule, and even small molecules such as amino acids have thousands of potentially observable isotopic variants. However, due to the analytical challenges of separating and observing isotopologues, only a few dimensions of isotopic diversity are routinely measured. Overcoming these challenges requires both an experimental method to observe many isotopic properties and a theoretical framework for interpreting these experiments. In Part 1, we presented such a theoretical framework; here, we demonstrate an experimental method, which we apply to methionine. Our approach uses a Q Exactive HF Orbitrap to perform several “M + N experiments”, where a sample is ionized, a subset of its isotopologues with cardinal mass N daltons greater than the unsubstituted isotopologue is selected and fragmented, and the proportions of all detectable isotopic forms of those fragment ions are quantified. We perform M + 1, M + 2, M + 3, and M + 4 experiments of a methionine sample and standard where the sample has a 100 ‰ enrichment of 13C at the methyl carbon relative to the natural 13C abundance at that position in the standard, and is otherwise identical to the standard. We observe isotopic forms of 8 fragment ion species for each version of the M + N experiment. With the assistance of a forward model of expected mass spectra, we identify isotopic peaks for each fragment ion based on observed mass and abundance, screen these for data quality, and quantify abundances for 146 unique isotopic peaks at precisions of ≈ 0.3–3 ‰. We present our direct observations and use them to reconstruct the concentrations of 19 individual singly, doubly, and triply-substituted isotopologues; doing so gives fewer constraints and broader error bars than working with the direct observations, but may be more interpretable for some applications. We also examine possibilities for measuring additional peaks, which are primarily limited by the detection limit of the Orbitrap-IRMS method. We then suggest some possible uses of our direct measurements for chemical forensics and hypothesis testing. Furthermore, our results demonstrate the diversity of isotopic constraints currently observable and interpretable for organic molecules.

58 GEOSCIENCES↗
DOE OSTI2020

Phonon-mediated lipid raft formation in biological membranes

Short-wavelength collective molecular motions, also known as phonons, have recently attracted much interest in revealing dynamic properties of biological membranes through the use of neutron and x-ray scattering, infrared and Raman spectroscopies, and molecular dynamics simulations. Experimentally detecting unique vibrational patterns such as, shear phonon excitations, viscoelastic crossovers, transverse acoustic phonon gaps, and continuous and truncated optical phonon modes in cellular membranes, to name a few, has proven non-trivial. Here, we review recent advances in liquid thermodynamics that have resulted in the development of the phonon theory of 1 liquids. The theory has important predictions regarding the shear vibrational spectra of fluids, namely the emergence of viscoelastic crossovers and transverse acoustic phonon gaps. Furthermore, we show that these vibrational patterns are common in soft (non-crystalline) materials, including, but not limited to liquids, colloids, liquid crystals (mesogens), block copolymers, and biological membranes. The existence of viscoelastic crossovers and acoustic phonon gaps define the self-diffusion properties of cellular membranes and provide a molecular picture of the transient nature of lipid rafts.1 Importantly, the timescales (picoseconds) for the formation and dissolution of transient lipid rafts match the lifetime of the formation and breakdown of interfacial water hydrogen bonds. Apart from acoustic propagating phonon modes, biological membranes can also support more energetic non-propagating optical phonon excitations, also known as standing waves or breathing modes. Importantly, optical phonons can be truncated due to the existence of finite size nanodomains made up of strongly correlated lipid-cholesterol molecular pairs. These strongly coupled molecular pairs can serve as nucleation centers for the formation of stable rafts at larger length scales, due to correlations of spontaneous fluctuations (Onsager’s regression hypothesis). Finally and importantly, molecular level viscoelastic crossovers, acoustic phonon gaps, and continuous and truncated optical phonon modes may offer insights as to how lipid-lipid and lipid-protein interactions enable biological function.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Nanostructural and rheological transitions of pH-responsive supramolecular systems involving a zwitterionic amphiphile and a triamine

Supramolecular aqueous complexes of a synthesized zwitterionic surfactant, 2-(dimethyl(octadecyl)ammonio)acetate (stearyl betaine) and diethylenetriamine, have been found to display pH-tunable rheological properties without the need for a co-surfactant. For this supramolecular system, the dynamically changing interplay among the constituents is responsible for the rich phase behavior including hollow nanotubules, bilayers, and vesicles. A further hypothesis is that hollow nanotubular structure is highly desirable for achieving chain entanglement geometries with reduced mesh size. The rheological properties of the suspension were measured using a rotational rheometer. An analysis using zero-shear viscosities at various temperatures as well as differential scanning calorimetry(DSC) helped shed light on thermodynamic and phase transitions taking place. The morphology of the suspension was analyzed by using a combination of small angle x-ray scattering(SAXS) and atomic force microscopy(AFM). Large steady-shear viscosities (up to ~160 Pa.s) and viscoelastic behavior was observed in acidic conditions which diminished upon increasing the pH. A novel analysis consisting of measured thermodynamic quantities such as activation energy(E a ) and enthalpy of transition(ΔH T ) further allude to the rich pH-sensitive nanoarchitecture of the system. Rather than commonly observed wormlike micelles, hollow nanotubules, as long as 1.6 µm were observed at pH 4 which disintegrated to bilayer sheets and vesicles upon increasing pH. Finally, gaining a comprehensive understanding from all the results, a transition mechanism between different suspension architectures was proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Repetitively pulsed nanosecond discharge plasma decay in propane–oxygen gas mixture in the presence of a heating electric field

Plasma decay in the afterglow of a repetitively pulsed nanosecond discharge in a stoichiometric propane–oxygen mixture was experimentally investigated when a weak heating DC electric field was applied and in its absence. The discharge was ignited at room gas temperature and a pressure of 1–2 Torr and was characterized by low specific energy inputs (<0.004 eV per molecule in one pulse). Using microwave interferometry, the temporal evolution of the electron density during plasma decay was studied, and the effective recombination coefficients were obtained from data processing. It was shown that the rate of plasma decay behaved in a non-monotonic manner with increasing degree of propane oxidation; at first the decay rate grew, then passed through a maximum, fell and saturated in the limit of a large (~2000) number of pulses. In this limit, the effect of the heating DC electric field on the plasma decay decreased with approaching chemical equilibrium. Numerical simulation of the observed effects was performed for low and high oxidation degrees of propane taking into account changes in the composition of positive ions in the plasma. Good agreement was obtained between measurements and calculations of the electron density during plasma decay in these cases. Here it was shown that the formation of cluster ions in the discharge afterglow plays a fundamental role. The plasma decay was controlled by electron recombination with hydrocarbon cluster ion at low oxidation degree of propane and with water cluster (hydrated) ions at high oxidation degree. A hypothesis was proposed to explain the observed nonmonotonic behavior of the plasma decay rate with an increase in the propane oxidation in the discharge, based on the formation of hydrated hydrocarbon ions C x H y + (H 2 O) k at moderate oxidation degrees.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Real-fluid behavior in rapid compression machines: Does it matter?

Rapid compression machines (RCMs) have been extensively used to quantify fuel autoignition chemistry and validate chemical kinetic models at high-pressure conditions. Historically, the analyses of experimental and modeling RCM autoignition data have been conducted based on the adiabatic core hypothesis with ideal gas assumption, where real-fluid behavior has been completely overlooked, though this might be significant at common RCM test conditions. Here, this work presents a first-of-its-kind study that addresses two significant but overlooked questions for autoignition studies within RCMs in the fundamental combustion community: (i) experiment-wise, can unaccounted-for real-fluid behavior in RCMs affect the interpretation and analysis of RCM experimental data? and (ii) simulation-wise, can unaccounted-for real-fluid behavior in RCMs affect RCM autoignition modeling and the validation of chemical kinetic models? To this end, theories for real-fluid isentropic change are newly proposed and derived based on high-order Virial EoS, and are further incorporated into an effective-volume real-fluid autoignition modeling framework newly developed for RCMs. With detailed analyses, the strong real-fluid behavior in representative RCM tests is confirmed, which can greatly influence the interpretation of RCM autoignition experiments, particularly the determination of end-of-compression temperature and evolution of the adiabatic core in the reaction chamber. Furthermore, real-fluid RCM modeling results reveal that considerable error can be introduced into simulating RCM autoignition experiments when following the community-wide accepted effective-volume approach by assuming ideal-gas behavior, which can be as high as 64% in the simulated ignition delay time at compressed pressure of 125 bar and lead to contradictory validation results of chemical kinetic models. Therefore, we recommend the community to adopt frameworks with real-fluid behavior fully accounted for (e.g., the one developed in this study) to analyze and simulate past and future RCM experiments, so as to avoid misinterpretation of RCM autoignition experiments and eliminate the potential errors that can be introduced into the simulation results with the existing RCM modeling frameworks.

High-order Virial equation of state↗
DOE OSTI2025

Impact of amorphous pockets on displacement damage evolution in silicon

Silicon has long been known to exhibit amorphization in response to heavy particle bombardment. For doses below the total amorphization threshold, partial amorphization is observed in the form of scattered amorphous pockets. While extensive research has gone into modeling the formation and evolution of amorphous pockets in response to irradiation, no studies yet investigate their impact on the evolution of other damage such as interstitial supersaturation and clustering. In this study, we survey the impact of amorphous pockets on defect evolution in silicon when treated as static sinks. MD is first used to show that amorphous pockets provide energetically favorable sites for point defects relative to the crystalline bulk, supporting the hypothesis that they act as sinks. A 0-D cluster dynamics model is then constructed, taking an interstitial clustering model from the literature and including amorphous pockets as a sink species. We conduct our survey for temperatures between 30 and 400 °C and sink strengths between 1 to 6 x 10 10 cm −2 . Both implantation- and radiation-induced damage states are investigated using interstitial and vacancy concentrations as initial condition variables. We find that, due to the differing migration rates of the interstitial and the vacancy, amorphous pockets have a non-monotonic impact on the final damage state depending on the effective sink strength of the amorphous pockets, resulting in increased damage formation in regimes of intermediate amorphization. In conclusion, this result emphasizes the important role of amorphous pockets in governing the evolution of damage in partially amorphized crystalline materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Initial assessment of alternative carbon fiber geometries for design of cost-effective compressive performance: Size effect studies

Carbon fiber provides opportunity to reduce weight in structural composites, including wind turbine blades, due to the material's superior specific stiffness and specific strength compared to alternatives. Despite these advantages, cost and compressive performance are considered weaknesses for carbon fiber products available today. Studies to produce low-cost carbon fiber alternatives, including the use of textile-derived precursor systems, have shown progress and merit through the DOE/ORNL low-cost carbon fiber initiatives. Here, this work focuses on enabling increases in compressive strength through design of the carbon fiber geometry, applicable to both textile and conventional precursor systems, while also providing opportunities to reduce carbon fiber processing costs. Fiber-resin interface and fiber alignment are among the most frequently cited factors controlling composite compressive performance. However, it is believed that there is opportunity in traditionally unexplored routes to increasing compressive strength through alteration of the carbon fiber geometry by increasing the fiber area moment of inertia and/or the fiber perimeter and interfacial area. This paper presents initial results from manufacturing carbon fiber materials to assess the impacts of carbon fiber size on tested composite compressive performance with projected neutral or even beneficial impact on fiber and composite manufacturing economics. Carbon fiber systems with increasing size illustrate a favorable correlation for compressive performance greater than predicted from a micromechanical failure model. The manufacturing and mechanical test results support the hypothesis of this work that alterations to fiber geometry can be used to produce improvements of the compressive strength of carbon fiber reinforced polymers and provide incentive for related work in designing alternative shapes to further enhance compressive performance.

42 ENGINEERING↗
DOE OSTI2026

Discovery of additional ancient genome duplications in yeasts

Whole-genome duplication (WGD) has had profound macroevolutionary impacts on diverse lineages, preceding adaptive radiations in vertebrates, teleost fish, and angiosperms. In contrast to the many known ancient WGDs in animals, and especially plants, we are aware of evidence for only four WGDs in fungi. The oldest of these occurred ∼100 million years ago (mya) and is shared by ∼60 extant Saccharomycetales species, including the baker’s yeast Saccharomyces cerevisiae. Notably, this is the only known ancient WGD event in the yeast subphylum Saccharomycotina. The dearth of ancient WGD events in fungi remains a mystery. Some studies have suggested that fungal lineages that experience chromosome and genome duplication quickly go extinct, leaving no trace in the genomic record, while others contend that the lack of known WGDs is due to an absence of data. Under the second hypothesis, additional sampling and deeper sequencing of fungal genomes should lead to the discovery of more WGD events. Coupling hundreds of recently published genomes from nearly every described Saccharomycotina species, with three additional long-read assemblies, we discovered three novel WGD events. Although the functions of retained duplicate genes originating from these events are broad, they bear similarities to the well-known WGD that occurred in the Saccharomycetales. In conclusion, our results suggest that WGD may be a more common evolutionary force in fungi than previously believed.

convergent evolution↗
DOE OSTI2021

Systematics in the XENON1T data: The 15-keV anti-axion

The XENON1T collaboration Aprile et al. [2020] has found an excess of electron recoil events in their Science Run 1 data below ~7 keV with a spectral shape consistent with that expected from a solar-axion-induced signal. The claimed statistical significance of the solar-axion model over the null hypothesis is 3.5σ. In this work we provide suggestive evidence for mismodeling in the electron recoil data that may decrease the local significance of the axion model. To reach this conclusion, we search for a signal with the spectral template of the solar axion model, but shifted to higher (unphysical) energies above ~7 keV. We find that the distribution of significances found from this side-band analysis does not follow the expected chi-square distribution. For example, we find a high-significance feature in the data, with a global $p$-value $p≈0.026$, when the solar axion model is shifted upwards in energy by ~15 keV and allowed to have a negative normalization. We argue that such statistical tests, if performed a priori, provide a data-driven way to test and potentially account for systematic uncertainties on the background model in low-threshold dark matter experiments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

BrainXcan identifies brain features associated with behavioral and psychiatric traits using large-scale genetic and imaging data

Advances in brain MRI have enabled many discoveries in neuroscience. Case-control comparisons of brain MRI features have highlighted potential causes of psychiatric and behavioral disorders. However, due to the cost and difficulty of collecting MRI data, most studies have small sample sizes, limiting their reliability. Furthermore, reverse causality complicates interpretation because many observed brain differences are the result rather than the cause of the disease. Here we propose a method (BrainXcan) that leverages the power of large-scale genomewide association studies (GWAS) and reference brain MRI data to discover new mechanisms of disease etiology and validate existing ones. BrainXcan tests the association with genetic predictors of brain MRI-derived features and complex traits to pinpoint relevant brain-wide and region-specific features. Requiring only genetic data, BrainXcan allows us to test a host of hypotheses on mental illness, across many MRI modalities, using public data resources. For example, our method shows that reduced axonal density across the brain is associated with schizophrenia risk, consistent with the disconnectivity hypothesis. We also find that the hippocampus volume is associated with schizophrenia risk, highlighting the potential of our approach. Taken together, our results show the promise of BrainXcan to provide insights into the biology of GWAS traits.

Association study↗
DOE OSTI2021

Characterization data of an (AlFeNiTiVZr) 1-x Cr x multi-principal element alloy continuous composition spread library

The data provided in this article is related to the research article entitled “Phase stabilization and oxidation of a continuous composition spread multi-principal element (AlFeNiTiVZr) 1-x Cr x alloy”. This data article describes the high-throughput synthesis and characterization processes of an (AlFeNiTiVZr) 1-x Cr x alloy system. Continuous composition spread (CCS) thin-film libraries were synthesized by co-depositing an AlFeNiTiVZr metal alloy target and Cr target via magnetron sputtering. Post-processing was performed on the sample libraries with a vacuum anneal at 873 K and an air anneal at 873 K. Compositional data was determined via WDS in order to verify parameters provided by an in-house sputter model. Crystallographic data was captured via synchrotron diffraction and diffractograms were compared as a function of the change in Cr concentration. These measurements were taken in order to observe phase behavior after oxidation throughout the composition library. Furthermore, vibrational spectrographic data is provided of the oxidized library to show surface speciation along the composition gradient of the alloy system. The structural and oxidative behavior of the (AlFeNiTiVZr) 1-x Cr x alloy can be analysed using the data provided in this article. Additionally, this characterization dataset can be utilized in machine learning algorithms for determining important features and parameters for future hypothesis generation of functional multi-principal element alloys (MPEAs).

36 MATERIALS SCIENCE↗
DOE OSTI2020

A new phenomenological model to describe root-soil interactions based on percolation theory

In his paper on net primary productivity of terrestrial communities predicted from climatological data, Rosenzweig (1968) argued that variability in productivity is well accounted for by (evapo)-transpiration, and that water from transpiration is, on global scales, the most variable component in the photosynthesis reaction. The goal of this paper is to investigate whether variability in plant growth on local scales and within species is primarily related to transpiration under several scenarios including different terrain curvature, slope aspect, soil characteristics, and climate ranges. Here, we test the hypothesis that this relationship exists because root growth into the surface soil layers (0–2 m) tends to follow paths with minima in resistance, which in turn maximizes water flow and nutrient delivery rates that regulate growth. The set of all connected paths with individual pore-to-pore flow resistances less than a critical, percolating, value forms a cluster with mass fractal dimensionality, d f . We propose that roots follow paths through the 2D percolation cluster, defining the set of all optimal flow paths, making the 2D value of d f from percolation relevant to root fractal dimensionality. The tortuosity of such optimal paths as defined in percolation theory should then relate root length to root radial extent, linking the parameters of root tortuosity and plant productivity. Our analysis of large data sets across species implies that root radial extent and tree height are both proportional to cumulative transpiration until trees approached maximum height, and their growth rates are proportional to the transpiration rate, not to the moisture content. Local variations in tree height as functions of the variables investigated appear generally consistent with deduced variations in transpiration. Here this correlation is investigated more closely in the context of studies addressing individual tree species.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Electrolyte effects on the electrochemical performance of microemulsions

Here, we report a study of the electrochemistry of Ferrocene (Fc) in a Tween®20 (polyethylene glycol (20) sorbitan monolaurate) /1-butanol/ water/Toluene (TBWT) microemulsion system, focusing on the effects of electrolyte components. Resistance and conductivity measurements are used along with Cyclic Voltammetry (CV) to characterize the effects of supporting electrolyte, such as Bu 4 NBF 4 and KNO 3 , on the electrochemical performance and transport properties of Fc. With increasing Fc-containing oil phase concentration in the microemulsion, the observed peak current density fails to increase proportionately with the Fc concentration. Adding 0.05 m Bu 4 NBF 4 in the oil phase significantly increases the current density, presumably by lowering the resistance of microemulsion and promoting the accessibility of Fc in the system. Moreover, increasing the aqueous phase supporting electrolyte from 0.5 m KNO 3 to 1 m KNO 3 does not exhibit an analogous effect. We discuss these results in the context of our working hypothesis for microemulsion organization and its implications for electron transfer to Fc.

Conductivity↗