Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surfaced Polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Surface analysis of graphite fiber reinforced polyimide composites

Several techniques have been used to establish the effect of different surface pretreatments on graphite-polyimide composites. Composites were prepared from Celion 6000 graphite fibers and the polyimide LARC-160. Pretreatments included mechanical abrasion, chemical etching and light irradiation. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were used in the analysis. Contact angle of five different liquids of varying surface tensions were measured on the composites. SEM results showed polymer-rich peaks and polymer-poor valleys conforming to the pattern of the release cloth used durng fabrication. Mechanically treated and light irradiated samples showed varying degrees of polymer peak removal, with some degradation down to the graphite fibers. Minimal changes in surface topography were observed on concentrations of surface fluorine even after pretreatment. The light irradiation pretreatment was most effective at reducing surface fluorine concentrations whereas chemical pretreatment was the least effective. Critical surface tensions correlated directly with the surface fluorine to carbon ratios as calculated from XPS.

Messick, D. L.↗

Recovery of Glass and Silicon Solar Cells from Si-Modules Through Laser Processing

This study demonstrates an innovative and environmentally friendly laser-based approach for the efficient recovery of glass and silicon solar cells, allowing the recycling of photovoltaic modules. The methodology involves the use of a high-power pulsed laser beam focusing at various interfaces within the modules. Specifically, the delivery of ultra-short pulse laser energy at the interfaces of glass and polymeric encapsulants, as well as at the encapsulants and silicon solar cells, facilitates the debonding of polymers from both glass and silicon cell surfaces. The debonding occurs through photothermal, ablation, chemical modification, and localized heat generation. The research successfully demonstrates the recovery of glass from commercial mini solar modules of size 11.5 x 6.8 cm 2 and a silicon wafer of size 3.0x1.6 cm 2 . Ongoing efforts aim to extend the effectiveness of this laser-based methodology to comprehensively recycle larger-size components. This innovative approach holds promise for addressing environmental concerns associated with the disposal of solar modules, contributing to sustainable practices in the renewable energy sector.

glass↗

Solutocapillary Convection Effects on Polymeric Membrane Morphology

Macro voids are undesirable large pores in membranes used for purification. They form when membranes are cast as thin films on a smooth surface by evaporating solvent (acetone) from a polymer solution. There are two un-tested hypotheses explaining the growth of macro voids. One states that diffusion of the non-solvent (water) is solely responsible, while the other states that solutocapillary convection is the primary cause of macro void growth. Solutocapillary convection is flow-caused by a concentration induced surface-tension gradient. Macrovoid growth in the former hypothesis is gravity independent, while in the latter it is opposed by gravity. To distinguish between these two hypotheses, experiments were designed to cast membranes in zero-gravity. A semi-automated apparatus was designed and built for casting membranes during the 20 secs of zero-g time available in parabolic aircraft flight such as NASA's KC-135. The phase changes were monitored optically, and membrane morphology was evaluated by scanning electron microscopy (SEM). These studies appear to be the first quantitative studies of membrane casting in micro-gravity which incorporate real-time data acquisition. Morphological studies of membranes cast at 0, 1, and 1.8 g revealed the presence of numerous, sparse and no macrovoids respectively. These results are consistent with the predictions of the solutocapillary hypothesis of macrovoid growth.

Krantz, William B.↗

Porous polymer network materials

Functionalized Porous Polymer Networks (PPNs) exhibiting favourable characteristics such as high surface area′ and gas uptake properties are disclosed, including methods of making such networks. A method of preparing a porous polymer network, comprising: (a) a step of homo-coupling a monomer in the presence of 2,2′-bipyridyl, 1,5-cycloocta-1,5-diene, a mixed solvent of DMF/THF and a compound or mixture selected from the group consisting of bis(1,5-cydoocta-1,5-diene)nickel(0), Ni(PPH3) 4, and Zn/NiCI2/NaBr/PPH3 at a temperature in the range of 20 to 40° C. These stable PPNs may be useful in the context of carbon capture, gas storage and separation, and as supports for catalysts.

Zhou, Hong -Cai↗

Conductive Polymer Binder for High-Tap-Density Nanosilicon Material for Lithium-Ion Battery Negative Electrode Application

High-tap-density silicon nanomaterials are highly desirable as anodes for lithium ion batteries, due to their small surface area and minimum first-cycle loss. However, this material poses formidable challenges to polymeric binder design. Binders adhere on to the small surface area to sustain the drastic volume changes during cycling; also the low porosities and small pore size resulting from this material are detrimental to lithium ion transport. This study introduces a new binder, poly(1-pyrenemethyl methacrylate-co-methacrylic acid) (PPyMAA), for a high-tap-density nanosilicon electrode cycled in a stable manner with a first cycle efficiency of 82%-a value that is further improved to 87% when combined with graphite material. Incorporating the MAA acid functionalities does not change the lowest unoccupied molecular orbital (LUMO) features or lower the adhesion performance of the PPy homopolymer. Our single-molecule force microscopy measurement of PPyMAA reveals similar adhesion strength between polymer binder and anode surface when compared with conventional polymer such as homopolyacrylic acid (PAA), while being electronically conductive. Finally, the combined conductivity and adhesion afforded by the MAA and pyrene copolymer results in good cycling performance for the high-tap-density Si electrode.

25 ENERGY STORAGE↗

Photosensitive response of azobenzene containing films towards pure intensity or polarization interference patterns

In this paper, we report on differences in the response of photosensitive azobenzene containing films upon irradiation with the intensity or polarization interference patterns. Two materials are studied differing in the molecular weight: an azobenzene-containing polymer and a molecular glass formed from a much smaller molecule consisting of three connected azobenzene units. Topography changes occurring along with the changes in irradiation conditions are recorded using a homemade set-up combining an optical part for generation and shaping of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. In this way, we could reveal the unique behavior of photosensitive materials during the first few minutes of irradiation: the change in topography is initially driven by an increase in the azobenzene free volume along with the trans-cis isomerization, followed by the mass transport finally resulting in the surface relief grating. This study demonstrates the great potential of our setup to experimentally highlight puzzling processes governing the formation of surface relief gratings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photo-mechanical patterning with light activated polymers.

Light activated polymers, which are capable of mechanically responding to light, promise to offer exciting, innovative, and unique material capabilities. Such materials include: photo-radical mediated cleavage and reformation of the polymer backbone in cross-linked elastomers that results in local stress relaxation; photo-switching cross-links in shape memory polymers; and photo-isomerization of azobenzene groups contained in liquid crystal elastomers. In this paper, using our recent material model that couples multiphysical processes involved in light-activated polymers, we demonstrate that a variety of patterns can be created on light activated polymer thin films when coupling mechanical deformation with light irradiation. Here, the polymer thin film is first stretched uniaxially or biaxially. Light is then irradiated on the surface of the thin film. After light irradiation, removal external load partially recovers the initial stretching of the polymer thin film and induces patterns. The variation of the geometry of the patterns can be controlled by a variety of parameters such as initial stretching, light intensity, etc. Photo-patterning with light activated polymer therefore offers a novel way to create surface patterns.

36 MATERIALS SCIENCE↗

Synthetic Routes to Shaped AuPt Core-Shell Particles with Smooth Surfaces Based on Design Rules for Au Nanoparticle Growth

Widespread implementation of polymer electrolyte fuel cells is limited by the performance of Pt catalysts because of the high cost of Pt and the propensity for catalyst surfaces to lose activity as a result of surface poisoning. AuPt core–shell particles show potential to address these issues, yet provide new challenges because of the immiscibility of Au and Pt during particle growth. In this work, AuPt core–shell particles with distinct shapes are made using a one-pot synthesis under mild reaction conditions by exploiting the difference in reduction rate between Au and Pt ions. Employing this approach results in smooth, well-defined surfaces, rather than the more commonly observed dendritic or island-like Pt shells that generally form when presynthesized Au cores are used to template Au-core/Pt-shell particle growth. By using the established mechanisms of Au nanoparticle growth, facile modification of particle shape and size is achieved with no significant change to the Pt surface. As a result, this approach also offers a synthetic route to the preparation of more complex AuPt nanostructures, such as those with exotic shapes and high-energy surface facets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Role of Zr Addition versus Textural Properties in Enhancement of CO 2 Adsorption Performance in Silica/PEI Composite Sorbents

Polymeric amines such as poly(ethylenimine) (PEI) supported on mesoporous oxides are promising candidate adsorbents for CO 2 capture processes. One important aspect to the design and optimization of these materials is a fundamental understanding of how the properties of the oxide support such as pore structure, particle morphology, and surface properties affect the efficiency of the guest polymer in its interactions with CO 2 . Previously, the efficiency of impregnated PEI to adsorb CO 2 was shown to increase upon the addition of Zr as a surface modifier in SBA-15. But, the efficacy of this method to tune the adsorption performance has not been explored in materials of differing textural and morphological nature. These issues are directly addressed via the preparation of an array of SBA-15 support materials with varying textural and morphological properties, as well as varying content of zirconium doped into the material. Zirconium is incorporated into the SBA-15 either during the synthesis of the SBA-15, or postsynthetically via deposition of Zr species onto pure-silica SBA-15. The method of Zr incorporation alters the textural and morphological properties of the parent SBA-15 in different ways. Importantly, the CO 2 capacity of SBA-15 impregnated with PEI increases by a maximum of ~60% with the quantity of doped Zr for a “standard” SBA-15 containing significant microporosity, while no increase in the CO 2 capacity is observed upon Zr incorporation for an SBA-15 with reduced microporosity and a larger pore size, pore volume, and particle size. Finally, adsorbents supported on SBA-15 with controlled particle morphology show only modest increases in CO 2 capacity upon inclusion of Zr to the silica framework. The data demonstrate that the textural and morphological properties of the support have a more significant impact on the ability of PEI to capture CO 2 than the support surface composition.

36 MATERIALS SCIENCE↗

Should thermostatted ring polymer molecular dynamics be used to calculate thermal reaction rates?

We apply Thermostatted Ring Polymer Molecular Dynamics (TRPMD), a recently proposed approximate quantum dynamics method, to the computation of thermal reaction rates. Its short-time transition-state theory limit is identical to rigorous quantum transition-state theory, and we find that its long-time limit is independent of the location of the dividing surface. TRPMD rate theory is then applied to one-dimensional model systems, the atom-diatom bimolecular reactions H + H{sub 2}, D + MuH, and F + H{sub 2}, and the prototypical polyatomic reaction H + CH{sub 4}. Above the crossover temperature, the TRPMD rate is virtually invariant to the strength of the friction applied to the internal ring-polymer normal modes, and beneath the crossover temperature the TRPMD rate generally decreases with increasing friction, in agreement with the predictions of Kramers theory. We therefore find that TRPMD is approximately equal to, or less accurate than, ring polymer molecular dynamics for symmetric reactions, and for certain asymmetric systems and friction parameters closer to the quantum result, providing a basis for further assessment of the accuracy of this method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of highly carboxylated colloidal polymers on cement hydration and interactions with calcium ions

Polymer latexes are often found to retard cement hydration. Interaction of polymer particles with Ca{sup 2+} in pore solution and adsorption of polymer on cement were proposed as possible mechanisms for the retardation effect. This paper aims at disclosing the retardation mechanism of colloidal polymers using a highly carboxylated polystyrene latex. Interaction between colloidal particles and Ca{sup 2+} was studied by post-treatment of the latex with Ca(NO{sub 3}){sub 2}. Techniques including calorimetry, adsorption test, ICP-OES, SEM, are involved to investigate effects of the post-treated latexes on hydrations of cement and C{sub 3}S. It is found that enrichment of Ca{sup 2+} on surface of colloidal particles doesn't contribute to the retardation effect of polymer on cement hydration. Furthermore, the acceleration effect of the two-step treated latex using Ca(NO{sub 3}){sub 2} and Na{sub 2}SiO{sub 3} suggests that nucleation inhibition of the adsorbed polymer layer on cement surface is the more conceivable mechanism responsible for the retardation effect of the highly carboxylated latex.

36 MATERIALS SCIENCE↗

Wetting behavior of polyelectrolyte complex coacervates on solid surfaces

The wetting behavior of complex coacervates underpins their use in many emerging applications of surface science, particularly wet adhesives and coatings. Many factors dictate if a coacervate phase will condense on a solid surface, including solution conditions, the nature of the polymer–substrate interaction, and the underlying supernatant–coacervate bulk phase behavior. In this work, we use a simple inhomogeneous mean-field theory to study the wetting behavior of complex coacervates on solid surfaces both off-coexistence (wetting transitions) and on-coexistence (contact angles). Here we focus on the effects of salt concentration, the polycation/polyanion surface affinity, and the applied electrostatic potential on the wettability. We find that the coacervate generally wets the surface via a first order wetting transition with second order transitions possible above a surface critical point. Applying an electrostatic potential to a solid surface always improves the surface wettability when the polycation/polyanion–substrate interaction is symmetric. For asymmetric surface affinity, the wettability has a nonmonotonic dependence with the applied potential. We use simple scaling and thermodynamic arguments to explain our results.

36 MATERIALS SCIENCE↗

Improved Rate for the Oxygen Reduction Reaction in a Sulfuric Acid Electrolyte using a Pt(111) Surface Modified with Melamine

The feasible commercialization of alkaline, phosphoric acid and polymer electrolyte membrane fuel cells depends on the development of oxygen reduction reaction (ORR) electrocatalysts with improved activity, stability, and selectivity. The rational design of surfaces to ensure these improved ORR catalytic requirements relies on the so-called "descriptors" (e.g., the role of covalent and noncovalent interactions on platinum surface active sites for ORR). Here, we demonstrate that through the molecular adsorption of melamine onto the Pt(111) surface [Pt(111)-M ad ], the activity can be improved by a factor of 20 compared to bare Pt(111) for the ORR in a strongly adsorbing sulfuric acid solution. Additionally, the M ad moieties act as "surface-blocking bodies," selectively hindering the adsorption of (bi)sulfate anions (well-known poisoning spectator of the Pt(111) active sites) while the ORR is unhindered. This modified surface is further demonstrated to exhibit improved chemical stability relative to Pt(111) patterned with cyanide species (CN ad ), previously shown by our group to have a similar ORR activity increase compared to bare Pt(111) in a sulfuric acid electrolyte, with Pt(111)-M ad retaining a greater than ninefold higher ORR activity relative to bare Pt(111) after extensive potential cycling as compared to a greater than threefold higher activity retained on a CN ad -covered Pt(111) surface. We suggest that the higher stability of the Pt(111)-M ad interface stems from melamine's ability to form intermolecular hydrogen bonds, which effectively turns the melamine molecules into larger macromolecular entities with multiple anchoring sites and thus more difficult to remove.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modification of polymer velvet cathode via metallic Mo coating for enhancement of high-current electron emission performances

The effect of surface Mo coating on the high-current electron emission performances for polymer velvet cathode has been investigated in a diode with A-K gap of 11.5 cm by the combination of time-resolved electrical diagnostic and temporal pressure variation. Compared with uncoated polymer velvet cathode under the single-pulsed emission mode, the Mo-coated one shows lower outgassing levels (∼0.40 Pa L), slower cathode plasma expansion velocity (∼2.30 cm/μs), and higher emission stability as evidences by the change in cathode current, temporal pressure variation, and diode perveance. Moreover, after Mo coating, the emission consistency of the polymer velvet cathode between two adjacent pulses is significantly improved in double-pulsed emission mode with ∼500 ns interval between two pulses, which further confirms the effectiveness of Mo coating for enhancement of electron emission performance of polymer velvet cathodes. These results should be of interest to the high-repetitive high-power microwave systems with cold cathodes.

36 MATERIALS SCIENCE↗

Dual-Responsive Reversible Plasmonic Behavior of Core–Shell Nanostructures with pH-Sensitive and Electroactive Polymer Shells

In this paper, we report novel dual-responsive plasmonic core–shell anisotropic nanostructures composed of gold nanorod (AuNR) and responsive polyaniline (PANI) shells with plasmonic mode appearance reversibly modulated through orthogonal stimuli (i.e., electrical potential and pH change). In this system, the PANI shells provide AuNR cores with three different refractive index environments depending on stimuli (pH and electrical potential). Therefore, no additional secondary responsive component is necessary to induce the dual-responsive properties of AuNR cores. Furthermore, in this study, dual-responsive properties can be realized for nanostructures fixed on substrates, whereas previously reported dual-responsive plasmonic systems can only be controlled in solution. Here, the highest localized surface plasmonic resonance (LSPR) shift of the AuNR cores can be induced by changing both local pH and applying electric potential. Notably, a significant plasmon band shift by 107 nm is realized with only 8 nm thick PANI shell due to the large refractive index change at the gold–polymer interface. A maximum shift of the longitudinal plasmon mode of 149 nm is obtained by applying a modest electrical potential (below ±1 V), a large shift rarely reported in the literature for metal nanostructures. Moreover, our anisotropic core/shell nanostructures exhibit stable and reversible dual-responsive LSPR behavior over 100 cycles without degradation.

36 MATERIALS SCIENCE↗

Laser ablation of polymer coatings allows for electromagnetic field enhancement mapping around nanostructures

Subdiffraction spatially resolved, quantitative mapping of strongly localized field intensity enhancement on gold nanostructures via laser ablation of polymer thin films is reported. Illumination using a femtosecond laser scanning microscope excites surface plasmons in the nanostructures. The accompanying field enhancement substantially lowers the ablation threshold of the polymer film and thus creates local ablation spots and corresponding topographic modifications of the polymer film. Such modifications are quantified straightforwardly via scanning electron microscopy and atomic force microscopy. Thickness variation in the polymer film enables the investigation of either the initial ablation phase or ablation induced by collective enhancement effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Study of Space Environment Effect on Highly Thermally Conductive Hybrid Carbon Fiber Polymer Composites

A set of novel highly thermally conductive hybrid carbon fiber (CF) polymer composites has been developed for lightweight thermal radiator applications in space missions. This study investigates the effects of the space environment on these materials following exposure in low-Earth orbit (LEO) during the Materials International Space Station Experiment (MISSE)-17 flight mission, where samples experienced 159 days of combined atomic oxygen (AO), ultraviolet (UV) radiation, high vacuum, space radiation and thermal cycling. Post-flight characterization included weight loss, surface morphology, thermo-optical properties, molecular structures, glass transition temperature, thermal degradation and thermal conductivity analyses. The pyrolytic graphite sheet (PGS) samples exhibited negligible weight loss, stable thermo-optical property, and only minor oxidation signature on the exposed surface. Although AO erosion of the epoxy polymer matrix was evident, carbon nanotube (CNT)-infused PGS/CF epoxy composites retained high thermal emissivity and preserved their high thermal conductivities. These results demonstrate that the novel highly thermally conductive hybrid CF composites possess strong environmental resilience and are promising candidates for lightweight thermal radiators and thermal management components in future space exploration missions.

Space Environment↗