Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TUNNEL EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All-MOCVD-grown gallium nitride diodes with ultra-low resistance tunnel junctions

In this work, we carefully investigate three important effects including postgrowth activation annealing, delta (δ) dose and magnesium (Mg) buildup delay as well as experimentally demonstrate their influence on the electrical properties of GaN homojunction p–n diodes with a tunnel junction (TJ). The diodes were monolithically grown by metalorganic chemical vapor deposition (MOCVD) in a single growth step. By optimizing the annealing parameters for Mg activation, δ-dose for both donors and acceptors at TJ interfaces, and p + -GaN layer thickness, a significant improvement in tunneling properties is achieved. For the TJs embedded within the continuously-grown, all-MOCVD GaN diode structures, ultra-low voltage penalties of 158 mV and 490 mV are obtained at current densities of 20 A cm –2 and 100 A cm –2 , respectively. The diodes with the engineered TJs show a record-low differential resistivity of 1.6 × 10 –4 Ω cm 2 at 5 kA cm –2 .

42 ENGINEERING↗

Second-Order Josephson Effect in Excitonic Insulators

We show that in electron-hole bilayers with excitonic orders arising from conduction and valence bands formed by atomic orbitals that have different parities, nonzero interlayer tunneling leads to a second-order Josephson effect. This means the interlayer electrical current is related to the phase of the excitonic order parameter as J = J c sin 2θ instead of J = J c sin θ and that the system has two degenerate ground states at θ = 0, π that can be switched by an interlayer voltage pulse. When generalized to a three dimensional stack of alternating electron-hole planes or a two dimensional stack of chains, the ac Josephson effect implies that electric field pulses perpendicular to the layers and chains can steer the order parameter phase between the two degenerate ground states, making these devices ultrafast memories. Here, the order parameter steering also applies to the excitonic insulator candidate Ta 2 NiSe 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The response field and the saddle points of quantum mechanical path integrals

Highlights: • Moyal quantum mechanics and Marinov’s path integral. • Classical and semiclassical limits of Marinov’s path integral. • Oscillating functional integrals. • Instantons of the Marinov’s path integral. In quantum statistical mechanics, Moyal’s equation governs the time evolution of Wigner functions and of more general Weyl symbols that represent the density matrix of arbitrary mixed states. A formal solution to Moyal’s equation is given by Marinov’s path integral. In this paper we demonstrate that this path integral can be regarded as the natural link between several conceptual, geometric, and dynamical issues in quantum mechanics. A unifying perspective is achieved by highlighting the pivotal role which the response field, one of the integration variables in Marinov’s integral, plays for pure states even. The discussion focuses on how the integral’s semiclassical approximation relates to its strictly classical limit; unlike for Feynman type path integrals, the latter is well defined in the Marinov case. The topics covered include a random force representation of Marinov’s integral based upon the concept of “Airy averaging”, a related discussion of positivity-violating Wigner functions describing tunneling processes, and the role of the response field in maintaining quantum coherence and enabling interference phenomena. The double slit experiment for electrons and the Bohm–Aharonov effect are analyzed as illustrative examples. Furthermore, a surprising relationship between the instantons of the Marinov path integral over an analytically continued (“Wick rotated”) response field, and the complex instantons of Feynman-type integrals is found. The latter play a prominent role in recent work towards a Picard–Lefschetz theory applicable to oscillatory path integrals and the resurgence program.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced Strong-Field Ionization and Fragmentation of Methanol Using Noncommensurate Fields

Electron-initiated chemistry with chemically relevant electron energies (10–200 eV) is at the heart of several high-energy processes and phenomena. To probe these dissociation and fragmentation reactions with femtosecond resolution requires the use of femtosecond lasers to induce ionization of the polyatomic molecules via electron rescattering. Here, we combine noncommensurate fields with intensity-difference spectra using methanol as a model system. Experimentally, we find orders of magnitude enhancement in several product ions of methanol when comparing coherent vs incoherent combinations of noncommensurate fields. This approach not only mitigates multiphoton ionization and multicycle effects during ionization but also enhances tunnel ionization and electron rescattering energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density dependence of the excitation gaps in an undoped Si/SiGe double-quantum-well heterostructure

In this work, we report low-temperature magneto-transport measurements of an undoped Si/SiGe asymmetric double quantum well heterostructure. The density in both layers is tuned independently utilizing top and bottom gates, allowing the investigation of quantum wells at both imbalanced and matched densities. Integer quantum Hall states at total filling factor v T =1 and v T =2 are observed in both density regimes, and the evolution of their excitation gaps is reported as a function of the density. The v T =1 gap evolution departs from the behavior generally observed for valley splitting in the single layer regime. Furthermore, by comparing the v T =2 gap to the single particle tunneling energy, Δ SAS , obtained from Schrödinger–Poisson (SP) simulations, evidence for the onset of spontaneous interlayer coherence is observed for a relative filling fraction imbalance smaller than ~50%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning 2D magnetism in Fe 3+X GeTe 2 films by element doping

Two-dimensional (2D) ferromagnetic materials have been discovered with tunable magnetism and orbital-driven nodal-line features. Controlling the 2D magnetism in exfoliated nanoflakes via electric/magnetic fields enables a boosted Curie temperature (T C ) or phase transitions. One of the challenges, however, is the realization of high T C 2D magnets that are tunable, robust and suitable for large scale fabrication. Here, we report molecular-beam epitaxy growth of wafer-scale Fe 3+X GeTe 2 films with T C above room temperature. By controlling the Fe composition in Fe 3+X GeTe 2 , a continuously modulated T C in a broad range of 185–320 K has been achieved. This widely tunable T C is attributed to the doped interlayer Fe that provides a 40% enhancement around the optimal composition X = 2. We further fabricated magnetic tunneling junction device arrays that exhibit clear tunneling signals. Our results show an effective and reliable approach, i.e. element doping, to producing robust and tunable ferromagnetism beyond room temperature in a large-scale 2D Fe 3+X GeTe 2 fashion.

2D ferromagnetic material↗

Nanoscale modulation of flat bands via controllable charge density wave defects in 4⁢𝐻⁡𝑏−Ta⁢S 2

Electron correlation is a main driver of exotic quantum phases and their interplay. The 4H b-TaS 2 system, possessing an intrinsic heterostructure of 1T- and 1H -TaS 2 monolayers, offers a unique opportunity to control electron correlation by distorting the atomic lattice or tuning interlayer coupling. Here, we investigated intrinsically deformed charge-density waves (CDWs) in the 1T layer of 4H b-TaS 2 to elucidate and control their effects on flat bands using scanning tunneling microscopy and spectroscopy (STM/S) combined with first-principles calculations. We identified two types of CDW defects: Type 1 has structural distortion and locally suppressed flat bands, while Type 2 features an increased flat band filling factor of intact CDW structure. Density functional theory calculations indicate that a sulfur vacancy in the 1T layer distorts the CDW structure and gives rise to a Type 1, whereas a sulfur vacancy in the 1H layer reduces the interlayer charge transfer and leads to a Type 2. Furthermore, we demonstrated creating and erasing individual CDW defects via STM manipulation. Here, our findings provide a pathway to not only tune flat bands but also selectively manipulate the interaction between CDW, the atomic lattice, and interlayer coupling in strongly correlated systems with atomic precision.

Charge density waves↗

Electrically controlled emission from singlet and triplet exciton species in atomically thin light-emitting diodes

We report electrically tunable spin singlet and triplet exciton emission from atomically aligned transition metal dichalcogenide (TMD) heterostructures. Furthermore, the observation of these states in both 0° and 60° heterostructures provides the stacking orientation degree of freedom for polarization switching in interlayer excitons. We confirm the spin configurations of the light-emitting excitons employing magnetic fields to measure effective exciton g factors. The interlayer tunneling current across the TMD heterostructure enables the electrical generation of singlet and triplet exciton emission in this atomically thin p-n junction. We demonstrate tunability between the singlet and triplet exciton photoluminescence via electrostatic gates and excitation power. By tuning the gates and interlayer bias voltage, the electroluminescence of the singlet and triplet can be switched with ratios of 10:1. Atomically thin TMD heterostructure light-emitting diodes thus enable a route for optoelectronic devices that can configure spin and valley quantum states independently.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Permutable SOS (symmetry operational similarity)

Abstract Based on symmetry consideration, quasi-one-dimensional (1D) objects, relevant to numerous observables or phenomena, can be classified into eight different types. We provide various examples of each 1D type and discuss their symmetry operational similarity (SOS) relationships, which are often permutable. A number of recent experimental observations, including current-induced magnetization in polar or chiral conductors, non-linear Hall effect in polar conductors, spin-polarization of tunneling current to chiral conductors, and ferro-rotational domain imaging with linear gyration are discussed in terms of (permutable) SOS. In addition, based on (permutable) SOS, we predict a large number of new phenomena in low symmetry materials that can be experimentally verified in the future.

Materials Science↗

Pseudotunnel Magnetoresistance in Twisted van der Waals Fe 3 GeTe 2 Homojunctions

Abstract Twistronics, a novel engineering approach involving the alignment of van der Waals (vdW) integrated two‐dimensional materials at specific angles, has recently attracted significant attention. Novel nontrivial phenomena have been demonstrated in twisted vdW junctions (the so‐called magic angle), such as unconventional superconductivity, topological phases, and magnetism. However, there have been only few reports on integrated vdW layers with large twist angles θ t , such as twisted interfacial Josephson junctions using high‐temperature superconductors. Herein, vdW homojunctions of the thin‐magnetic flakes, Fe 3 GeTe 2 (FGT), with large θ t ranging from 0° to 90°, without inserting any tunnel barriers are assembled. Nevertheless, these vdW homojunctions exhibit tunnel‐magnetoresistance (TMR) like behavior (pseudo‐TMR (PTMR) effect) with the ratios highly sensitive to the θ t values, revealing that the vdW gap at the junction interface between the twisted FGT layers behaves like a tunnel barrier and the θ t serves a control parameter for PTMR by drastically varying magnitudes of the lattice‐mismatch and the subsequent appearance of antiferromagnetic (AFM) spin alignment. First‐principles calculations considering vacuum gaps indicate strong dependence of TMR on the θ t driven by the sixfold screw rotational symmetry of bulk FGT. The present homojunctions hold promise as a platform for novel AFM spin‐dependent phenomena and spintronic applications.

Obata, Reiji [Faculty of Science and Engineering A↗

Theory of strong-field sequential double ionization of polyatomic molecules

Understanding of strong-field sequential double ionization (SDI) of molecules by a highly intense infrared laser pulse could be the key to observing electron motion in molecules in the attosecond to femtosecond timescale. Based on a novel density matrix approach for SDI (DM-SDI), a recent theoretical study has shown that SDI can be used as a probe to monitor the changes in vibronic coherence in homonuclear diatomic molecules. In this article, we extend the DM-SDI model to general molecules that could possess permanent dipole moments and arbitrary symmetry. We apply the model to SDI of a water molecule and identify the formation pathway of individual dication states. We further deduce that kinetic energy release spectra from two- and three-body fragments could carry the signature of vibronic coherence between the lowest two states of the water cation. Furthermore, our results suggest that observables from the SDI probe can be interpreted intuitively with only the knowledge of electronic structures of populated ionic states, making the SDI probe to be a highly desirable probing scheme for vibronic coherence in generic molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Role of bath-induced many-body interactions in the dissipative phases of the Su-Schrieffer-Heeger model

The Su-Schrieffer-Heeger chain is a prototype example of a symmetry-protected topological insulator. Coupling it nonperturbatively to local thermal environments, either through the intercell or the intracell fermion tunneling elements, modifies the topological window. To understand this effect, we employ the recently developed reaction-coordinate polaron transform (RCPT) method, which allows treating system-bath interactions at arbitrary strengths. The effective system Hamiltonian, which is obtained via the RCPT, exposes the impact of the baths on the SSH chain through renormalization of tunneling elements and the generation of many-body interaction terms. By performing exact diagonalization and computing the ensemble geometric phase, a topological invariant, which is applicable even to systems at finite temperature, we distinguish the trivial band insulator (BI) from the topological insulator (TI) phases. Furthermore, through the RCPT mapping, we are able to pinpoint the main mechanism behind the extension of the parameter space for the TI or the BI phases (depending on the coupling scheme, intracell or intercell), which is the bath-induced, dimerized, many-body interaction. In conclusion, we also study the effect of on-site staggered potentials on the SSH phase diagram and discuss extensions of our method to higher dimensions.

1-dimensional systems↗

Long-distance coherence of Majorana wires

Theoretically, a pair of Majorana bound states in a topological superconductor forms a single fermionic level even at large separations, implying that the parity information is stored nonlocally. The nonlocality leads to a long-distance coherence for electrons tunneling through a Coulomb-blockaded Majorana wire, an effect that can be observed, e.g., in an interferometer. Here, we examine theoretically the coherent electron transfer, taking into account that tunneling implies the long-distance transfer of charge, which is carried by one-dimensional plasmons. In this work, we show that the charge dynamics does not affect the coherence of the electron tunneling process in a topological superconductor consisting of a semiconductor wire proximitized by a single bulk superconductor. The coherence may be strongly suppressed, however, if the topological superconductivity derives from a semiconductor wire proximitized by a granular superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging the Acceptor Wave Function Anisotropy in Silicon

We present the first scanning tunneling microscopy (STM) image of hydrogenic acceptor wave functions in silicon. These acceptor states appear as square-ring-like features in STM images and originate from near-surface defects introduced by high-energy bismuth implantation into a silicon (001) wafer. Scanning tunneling spectroscopy confirms the formation of a p-type surface. Effective-mass and tight-binding calculations provide an excellent description of the observed square-ring-like features, confirming their acceptor character and attributing their symmetry to the light- and heavy-hole band degeneracy in silicon. A detailed understanding of the energetic and spatial properties of acceptor wave functions in silicon is essential for engineering large-scale acceptor-based quantum devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Imaging Reconfigurable Molecular Concentration on a Graphene Field-Effect Transistor

The spatial arrangement of adsorbates deposited onto a clean surface under vacuum typically cannot be reversibly tuned. Here we use scanning tunneling microscopy to demonstrate that molecules deposited onto graphene field-effect transistors (FETs) exhibit reversible, electrically tunable surface concentration. Continuous gate-tunable control over the surface concentration of charged F 4 TCNQ molecules was achieved on a graphene FET at T = 4.5K. This capability enables the precisely controlled impurity doping of graphene devices and also provides a new method for determining molecular energy level alignment based on the gate-dependence of molecular concentration. Gate-tunable molecular concentration is explained by a dynamical molecular rearrangement process that reduces total electronic energy by maintaining Fermi level pinning in the device substrate. Finally, the molecular surface concentration is fully determined by the device back-gate voltage, its geometric capacitance, and the energy difference between the graphene Dirac point and the molecular LUMO level.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of Amplification Properties of the Superconducting-Ferromagnetic Transistor

Here we report on the measurement results of the superconducting-ferromagnetic transistors (SFTs). The devices were made at Northwestern University and Hypres (SeeQC), Inc. (Nevirkovets et al., 2014; 2015). SFT is a multiterminal device with the SIS'FIFS (or SFIFS'IS) structure (where S, I, and F denote a superconductor, an insulator, and a ferromagnetic material, respectively) exploiting intense quasiparticle injection in order to modify the nonlinear I-V curve of a superconducting tunnel junction. SFT is capable of providing voltage, current, and power amplification while having good input/output isolation. We characterized the devices using different measurement techniques. We measured S parameters of the single- and double-acceptor devices at frequencies up to 5 MHz. Importantly, we confirmed that the isolation between the input and output of the device is quite good. However, the techniques typically employed to characterize semiconductor devices do not allow for revealing the full potential of our low-resistive SFT devices, especially those having two acceptors. In the latter case, we also tested the devices using the battery-powered current sources with floating grounds. Analyzing double-acceptor I-V curves recorded at different levels of injection currents, for an optimal load, we deduced a small-signal voltage gain of 33 and a power gain of 2.4. We suggest that further improvement of the SFT device parameters is possible in optimized devices, so that the device potentially may serve as a preamplifier for readout of output signals of cryogenic detectors and be useful as an element of other superconductor-based circuits. In addition, we used scanning transmission electron microscopy to identify some problems in the fabrication of the devices without any planarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size Effect of Local Current-Voltage Characteristics of MX 2 Nanoflakes: Local Density of States Reconstruction from Scanning Tunneling Microscopy Experiments

Local current-voltage characteristics for low-dimensional transition-metal dichalcogenides (LDTMD), as well as the reconstruction of their local density of states (LDOS) from scanning tunneling microscopy (STM) experiments, are of fundamental interest and can be useful for advanced applications. Most of the existing models either have limited applicability for complex-shaped LDTMDs (e.g., those based on the Simmons approach) or require solving of an ill-defined integral equation to deconvolute the unknown LDOS (e.g., those based on the Tersoff approach). Using a serial expansion of the Tersoff formulas, we propose a flexible method to reconstruct the LDOS from local current-voltage characteristics measured in STM experiments. We establish a set of key physical parameters, which characterize the tunneling current of a STM-probe–sample contact and the sample LDOS expanded in Gaussian functions. Using a direct variational method coupled with probabilistic analysis, we determine these parameters from the STM experiments for MoS2 nanoflakes with different numbers of layers. The main result is the reconstruction of the LDOS in a relatively wide energy range around the Fermi level, which allows us to gain insight into the local band structure of LDTMDs. The reconstructed LDOS reveal pronounced size effects for the single-layer, two-layer, and three-layer MoS 2 nanoflakes, which we relate to the low dimensionality and strong bending or corrugation of the nanoflakes. We hope that the proposed elaboration of the Tersoff approach, allowing LDOS reconstruction, will be of critical interest for the quantitative description of STM experiments and also of use to better understand the microscopic physical aspects of the surface, strain, and bending contributions to the LDTMDs’ electronic properties.

42 ENGINEERING↗