Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface coverage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Enhanced nucleation mechanism in ruthenium atomic layer deposition: Exploring surface termination and precursor ligand effects with RuCpEt(CO)2

Miniaturization of microelectronic devices necessitates atomic precision in manufacturing techniques, particularly in the deposition of thin films. Atomic layer deposition (ALD) is recognized for its precision in controlling film thickness and composition on intricate three-dimensional structures. This study focuses on the ALD nucleation and growth mechanisms of ruthenium (Ru), a metal that has significant future implications for microelectronics. Despite its advantages, the deposition of a high surface-free energy material like Ru on a low surface-free energy material such as an oxide often faces challenges of large nucleation delays and non-uniform growth. To address these challenges, we explored the effectiveness of organometallic surface pretreatments using trimethylaluminum (TMA) or diethylzinc (DEZ) to enhance Ru film nucleation and growth. Our study employed a less-studied Ru precursor, cyclopentadienylethyl(dicarbonyl)ruthenium [RuCpEt(CO)2], which demonstrated promising results in terms of reduced nucleation delay and increased film continuity. Ru ALD was performed on silicon substrates with native oxide, using RuCpEt(CO)2 and O2 as coreactants. Our findings reveal that surface pretreatment significantly improves nucleation density and film thickness within the initial 60 ALD cycles, achieving up to a 3.2-fold increase in Ru surface coverage compared to nonpretreated substrates. Supported by density functional theory calculations, we propose that the enhanced nucleation observed with RuCpEt(CO)2 compared to previously-studied Ru(Cp)2 is due to two key mechanisms: the facilitated removal of CO ligands during deposition, which enhances the reactivity of the precursor, and a hydrogen-abstraction reaction involving the ethyl ligand of RuCpEt(CO)2 and the metal-alkyl groups on the surface. This study not only advances our understanding of Ru ALD processes but also highlights the significant impact of precursor chemistry and surface treatments in optimizing ALD for advanced microelectronic applications.

Materials Science↗
DOE OSTI2020

Hybrid-Supported Bilayers Formed with Mixed-Charge Surfactants on C 18 -Functionalized Silica Surfaces

Mixtures of cationic-anionic surfactants have been demonstrated to spontaneously form ordered monolayers at hydrophobic-hydrophilic boundaries including air-water and oil-water interfaces. Here, confocal Raman microscopy is used to investigate the structure of hybrid-supported surfactant bilayers (HSSBs) formed by deposition of a distal leaflet of mixed cationic-anionic surfactants onto a proximal leaflet of n-alkane (C 18 ) chains on the interior surfaces of chromatographic silica particles. The surface coverage of the two surfactants in a hybrid bilayer was determined from carbon analysis and the relative Raman scattering of their respective head-groups. Within the measurement uncertainty, the stoichiometric ratio of the two surfactants is one-to-one, equivalent to mixed-charge-surfactant monolayers at air-water and oil-water interfaces and consistent with the role of the head-group electrostatic interactions in their formation. When self-assembled on the hydrophobic surface, pairs of oppositely-charged n-alkyl-chain surfactants resemble a phospholipid (phosphati¬dylcholine) molecule, with its zwitterionic head group and two hydrophobic acyl-chain tails. Indeed, the structure of these hybrid-supported surfactant bilayers on C 18 -modified silica surfaces is similar to that of hybrid-supported lipid bilayers (HSLBs) on the same supports, but with denser and more-ordered n-alkyl chains. Hybrid-supported surfactant bilayers exhibit a melting phase transition (gel to liquid-crystalline phase) with structural and energetic characteristics similar to hybrid-supported bilayers prepared from a zwitterionic phospholipid of the same alkyl chain length. These mixed-charge surfactants on n-alkane modified silica are stable in water over time (months), results that suggest the potential use of these hybrid bilayers for generating supported lipid bilayer-like surfaces or for separation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Designing ultrastable Pt/CeO 2 -Al 2 O 3 nanosheet catalysts for three-way catalysts applications

Designing Rh-free, especially Pt-only, three-way catalysts with improved low-temperature activity/stability is highly desirable. Herein, we demonstrate that ultrastable Pt/CeO 2 -Al 2 O 3 nanosheet catalysts can be obtained based on a Sabatier principle of metal-support interaction. Tuning the surface coverage of penta-site rich γ-Al 2 O 3 nanosheets (AlNS, weak adhesion to Pt) by CeO 2 “nano-islands” (strong adhesion to Pt) can lead to the synthesis of Pt/60 wt.%CeO 2 -AlNS that have lower light-off temperatures for CO, hydrocarbons, and NO compared to conventional Pt/CeO 2 and Pt/Al 2 O 3 catalysts by 100–200°C and a similar performance with the state-of-the-art Rh-based catalyst. Further, incorporating CeO 2 on the surface of AlNS can retard the sintering of CeO 2 during harsh redox hydrothermal aging, associate with the strong interaction between CeO 2 “nano-island” and penta-site rich γ-Al 2 O 3 nanosheets. Moreover, the improved activity/stability of Pt/CeO 2 -AlNS catalysts can be attributed to tuning of the Pt detachment and migration from and back to the CeO 2 “nano-islands”, respectively, that keeps Pt as nanoclusters on CeO 2 , the most active species for three-way catalyst applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1999

Mars Orbiter Sample Return Power Design

The NASA/JPL 2003/2005 Mars Sample Return (MSR) Missions will each have a sample return canister that will be filled with samples cored from the surface of MARS. These spherical canisters will be 14.8 cm in diameter and must be powered only by solar cells on the surface and must communicate using RF transmission with the recovery vehicle that will be coming in 2006 or 2009 to retrieve the canister. This paper considers the aspect and conclusion that went into the design of the power system that achieves the maximum power with the minimum risk. The power output for the spherical orbiting canister was modeled and plotted in various views of the orbit by the SOAP program developed by JPL. The requirements and geometry for a solar array on a sphere are unique and place special constraints on the design. These requirements include 1) accommodating a lid for sample loading into the canister, surface area was restricted from use on the Northern pole of the spherical canister. 2) minimal cell surface coverage (maximum cell efficiency), less than 40%, for recovery vehicle to locate the canister by optical techniques. 3) a RF transmission during 50% of MARS orbit time on any spin axis, which requires optimum circuit placement of the solar cell onto the spherical canister. The best configuration would have been a 4.5 volt round cell, but in the real world we compromised with six triangular silicon cells connected in series to form a hexagon. These hexagon circuits would be mounted onto a flat facet cut into the spherical canister. The surface flats are required in order to maximize power, the surface of the cells connected in series must be at the same angle relative to the sun. The flat facets intersect each other to allow twelve circuits evenly spaced just North and twelve circuits South of the equator of the spherical canister. Connecting these circuits in parallel allows sufficient power to operate the transmitter at minimum solar exposure, Northern pole of the canister facing the sun. Additional power, as much as 20%, is also generated by the circuits facing MARS due to albedo of MARS.

Mardesich, N.↗
DOE OSTI2023

CO 2 coverage on Pd catalysts accelerates oxygen removal in oxy-combustion systems

Oxy-combustion systems result in enriched CO 2 in exhaust gases; however, the utilization of the concentrated CO 2 stream from oxy-combustion is limited by remnant O 2 . CH 4 oxidation using Pd catalysts has been found to have high O 2 -removal efficiency. Here, in this study, the effect of excess CO 2 in the feed stream on O 2 removal with CH 4 oxidation is investigated by combining experimental and theoretical approaches. Experimental results reveal complete CH 4 oxidation without any side-products, and a monotonic increase in the rate of CO 2 generation with an increase in CO 2 concentration in the feed stream. Density-functional theory calculations show that high surface coverage of CO 2 on Pd leads to a reduction in the activation energy for the initial dissociation of CH 4 into CH 3 and H, and also the subsequent oxidation reactions. A CO 2 -rich environment in oxy-combustion systems is therefore beneficial for the reduction of oxygen in exhaust gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Anolyte Buffering and CO Coverage Effects in the Electrochemical Reduction of CO at Cu Electrocatalysts

Electrolytic CO reduction was investigated at copper electrocatalysts in zero-gap membrane electrode assemblies as a function of buffering agents and cofeeding with CO 2 or Ar. Results show an acetate Faradaic efficiency (FE) of 90% at 300 mA cm −2 using pure CO feeds and phosphate-buffered anolyte near pH 8. When using CO feeds with more alkaline anolytes, the hydrogen evolution reaction becomes the dominant reduction reaction, independent of the buffer. Product distributions of cofeeding experiments with CO and CO 2 show that increasing CO 2 cofeeding results in increased selectivity toward ethylene (42% FE) in near-neutral KHCO 3 anolytes or ethanol (40% FE) in alkaline KOH anolytes. Evaluation of several commercial anion exchange membranes shows similar selectivity trends, suggesting product selectivity is dominated by the local pH and surface coverage of CO. Based on these results, we propose pH buffering and CO coverage behaviors that facilitate high selectivities to acetate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Investigating Spillover Energy as a Descriptor for Single-Atom Alloy Catalyst Design

The identification of thermodynamic descriptors of catalytic performance is essential for the rational design of heterogeneous catalysts. Here, we investigate how spillover energy, a descriptor quantifying whether intermediates are more stable at the dopant or host metal sites, can be used to design single-atom alloys (SAAs) for formic acid dehydrogenation. Further, using theoretical calculations, we identify NiCu as a SAA with favorable spillover energy and demonstrate that formate intermediates produced after the initial O–H activation are more stable at Ni sites where rate-determining C–H activation occurs. Surface science experiments demonstrated that NiCu(111) SAAs are more reactive than Cu(111) while they still follow the formate reaction pathway. However, reactor studies of silica-supported NiCu SAA nanoparticles showed only a modest improvement over Cu resulting from surface coverage effects. Overall, this study demonstrates the potential of engineering SAAs using spillover energy as a design parameter and highlights the importance of adsorbate–adsorbate interactions under steady-state operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Interaction of molecular nitrogen with vanadium oxide in the absence and presence of water vapor at room temperature: Near-ambient pressure XPS

Interactions of N2 at oxide surfaces are important for understanding electrocatalytic nitrogen reduction reaction (NRR) mechanisms. Interactions of N2 at the polycrystalline vanadium oxide/vapor interface were monitored at room temperature and total pressures up to 10−1 Torr using Near-Ambient Pressure X-ray Photoelectron Spectroscopy (NAP-XPS). The oxide film was predominantly V(IV), with V(III) and V(V) components. XPS spectra were acquired in environments of both pure N2 and equal pressures of N2 and H2O vapor. In pure N2, broad, partially resolved N1s features were observed at binding energies of 401.0 and 398.7 eV, with a relative intensity of ∼3:1, respectively. These features remained upon subsequent pumpdown to 10−9 Torr. The observed maximum N surface coverage was ∼1.5 × 1013 cm−2—a fraction of a monolayer. In the presence of equal pressures of H2O, the adsorbed N intensity at 10−1 Torr is ∼25% of that observed in the absence of H2O. The formation of molecularly adsorbed H2O was also observed. Density functional theory-based calculations suggest favorable absorption energies for N2 bonding to both V(IV) and V(III) cation sites but less so for V(V) sites. Hartree–Fock-based cluster calculations for N2–V end-on adsorption show that experimental XPS doublet features are consistent with the calculated shake-up and normal, final ionic configurations for N2 end-on bonding to V(III) sites but not V(IV) sites. The XPS spectra of vanadium oxide transferred in situ between electrochemical and UHV environments indicate that the oxide surfaces studied here are stable upon exposure to the electrolyte under NRR-relevant conditions.

Balogun, K.↗
DOE OSTI2025

Resolving the Coverage Dependence of Surface Reaction Kinetics with Machine Learning and Automated Quantum Chemistry Workflows

Microkinetic models for catalytic systems require estimation of many thermodynamic and kinetic parameters that can be calculated for isolated species and transition states using ab initio methods. However, the presence of nearby coadsorbates on the surface can dramatically alter these thermodynamic and kinetic parameters causing them to be dependent on species coverage fractions. As there are combinatorially many coadsorbed configurations on the surface, computing the coverage dependence of these parameters is far less straightforward. We present a framework for generating and applying machine learning models to predict coverage-dependent parameters for microkinetic models. Our toolkit enables automatic calculation and evaluation of coadsorbed configurations allowing us to sample 2,000 coadsorbed adsorbates and transition states (TSs) for a diverse set of 9 reactions on Cu(111), a challenging surface, with four possible coadsorbates. This dataset was then used to train subgraph isomorphic decision trees (SIDTs) to predict the stability and association energy of configurations. We were able to achieve mean absolute errors (MAEs) of 0.106 eV on adsorbates, 0.172 eV on TSs, and due to natural error cancellation in SIDTs for relative properties, 0.130 eV on reaction energies and 0.180 eV on activation barriers. In conclusion, we describe how to use these models to predict coverage-dependent corrections for adsorbates and TSs and demonstrate on H*, HO*, and O* comparing the generated SIDT model with an iteratively refined version.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Single-Atom Manganese-Based Catalysts for the Oxidative Dehydrogenation of Propane

Combinatorial screening of 150 supported metal oxide (manganese and additives) catalysts was carried out via a high-throughput synthesis platform and parallel reactors for the oxidative dehydrogenation (ODH) of propane to propylene. Specifically, an organomanganese (0.05-2.5 Mn atoms/nm 2 ) complex was grafted on metal oxide supports (Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ) premodified with either Lewis acid (Al, Ti, Zn, and Zr) or redox-active (Cu, Cr, Ga Ni, V) additives at various surface coverages (25, 50, and 75%). Catalysts were characterized by high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, and UV-vis spectroscopy. Catalysts 0.05 Mn/V(50%)/Al 2 O 3 and 0.05 Mn/Ni(50%)/ZrO 2 showed the highest combined propane conversion and propylene selectivities (31/41% and 15/85%), with excellent stability at 500 degrees C for 25 h. The presence of Ni in Mn/Ni/ZrO 2 resulted in a 6-fold increase in turnover frequency (TOF) over the Mn/ZrO 2 . HRTEM identified single Mn atoms after 500 degrees C heat treatment. For the Mn/Ni/ZrO 2 system, Mn was incorporated into the support lattice due to the similar ionic radius of Mn 2+ and Zr 4+ , which was also enhanced by the presence of Ni. For the Mn/V/Al 2 O 3 system, highly active MnO was prevalent as observed by Raman. Both V and Mn contributed to an increase in mutual dispersion, but both species remained on the surface. Finally, it is proposed that the highly dispersed atom and interactions between Mn with either Ni or V are responsible for the ODH performance and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Hot-Carrier Injection and Millisecond Charge Separation from a Robust Heteroleptic Iron(II) Chromophore Immobilized on TiO 2

The synthesis, spectroscopic characterization, computational analysis, and photoelectrochemical behavior of a new iron-based chromophore, [(Cpy) 2 Fe- (deeb)](PF 6 ) 2 (Fe(Cpy) 2 (deeb)), where Cpy is 1-methyl-3-(2-pyridyl)imidazole and deeb is 4,4’-(CO 2 CH 2 CH 3 ) 2 -2,2’-bipyridine, is reported. Electrochemically reversible waves assigned to a metal-centered E o (Fe III/II ) = +0.48 and a ligand-centered E o (Fe 2+/+ ) = −1.47 V vs Fc +/0 reduction were evident in cyclic voltammetry measurements. The combination of a strong σ-donor and a π-acceptor lowered the energy of the metal-toligand charge-transfer (MLCT) excited state relative to the metal-centered state. Two MLCT transitions appear in the visible region at 424 and 580 nm. TDDFT calculations revealed that the lower-energy band was well formulated as Fe(II)→deeb, and the higher-energy transition was charge transfer to both the deeb and Cpy ligands. Resonance Raman spectroscopy supports these findings showing enhanced deeb vibrational modes with 532 nm excitation, both deeb and Cpy modes with 473 nm excitation, and exclusively Cpy with 405 nm excitation. Ultrafast spectroscopy reveals a short-lived (∼2 ps) MLCT excited state and a longer-lived (∼20 ps) metal-centered state. Efficient methods to deprotect the ester groups and anchor the complex to mesoporous TiO 2 (anatase) thin films in high surface coverages, Fe(Cpy) 2 (dcb)|TiO 2 σ = 3 × 10 −8 mol/cm 2 , were established. Pulsed light excitation of Fe(Cpy) 2 (dcb)|TiO 2 resulted in rapid excited state injection (k inj > 10 8 s −1 ) and formation of a charge-separated state, Fe III (Cpy) 2 (dcb)|TiO 2 (e), which persists on the millisecond time scale before returning cleanly to the ground state with secondorder kinetics. Injection yields measured 50 ns after light excitation were found to double from Φ = 0.15 with green (532 nm) light to 0.30 with blue (457 nm) light excitation. Incident photon-to-current efficiency (% IPCE) measurements as a function of excitation wavelength in a 0.5 M LiI/I 2 /CH 3 CN electrolyte provide clear evidence for band-selective “hot carrier” injection from the remote Cpy-localized excited state. Collectively, the spectroscopic and photoelectrochemical data indicate that a semiconductor can intercept hot electrons from iron chromophores even when the excited-state dipole is oriented away from the surface-anchoring ligand.

Charge transfer↗
DOE OSTI2026

Tuning the Functionalities of Porous Liquids for Emergent Gas-Capture Properties

Type 3 Porous Liquids (PLs) are a class of materials with the potential to revolutionize gas capture, storage, and utilization. These PLs are formed by suspending sorbent nanoparticles (e.g., metal−organic frameworks) in sterically excluded solvents, creating permanent porosity for gas capture in a processable, low-viscosity phase. Herein, a computational study revealed sorbent surface functionalization strategies to enhance CO 2 sorption, and the molecular structural signatures underpinning the enhancements in gas uptake. PLs composed of a ZIF-8 surface functionalized with 3-amino-1,2,4-triazole (Atz) in glyceryl triacetate were targeted for emergent CO 2 capture, exceeding that of the unfunctionalized ZIF-8 PL. ZIF-8 was surface functionalized with Atz at various surface coverage fractions (f), and classical molecular dynamics simulations predicted an increase in CO 2 sorption capacity with increasing f, up to f = 0.75. Additionally, detailed structural analyses revealed that solvent orientational order, derived from the solvent triplet-angle distribution, can identify the gas-capture potential of a PL without requiring computationally expensive direct modeling of the CO 2 sorption. Combined with experimental validation, initial computational screening of PL compositions promises to accelerate the discovery of PL compositions for novel gas separation materials platforms.

gas capture↗
DOE OSTI2022

Grain Boundary‐Derived Cu + /Cu 0 Interfaces in CuO Nanosheets for Low Overpotential Carbon Dioxide Electroreduction to Ethylene

Abstract Electrochemical CO 2 reduction reaction can be used to produce value‐added hydrocarbon fuels and chemicals by coupling with clean electrical energy. However, highly active, selective, and energy‐efficient CO 2 conversion to multicarbon hydrocarbons, such as C 2 H 4 , remains challenging because of the lack of efficient catalysts. Herein, an ultrasonication‐assisted electrodeposition strategy to synthesize CuO nanosheets for low‐overpotential CO 2 electroreduction to C 2 H 4 is reported. A high C 2 H 4 Faradaic efficiency of 62.5% is achieved over the CuO nanosheets at a small potential of −0.52 V versus a reversible hydrogen electrode, corresponding to a record high half‐cell cathodic energy efficiency of 41%. The selectivity toward C 2 H 4 is maintained for over 60 h of continuous operation. The CuO nanosheets are prone to in situ restructuring during CO 2 reduction, forming abundant grain boundaries (GBs). Stable Cu + /Cu 0 interfaces are derived from the low‐coordinated Cu atoms in the reconstructed GB regions and act as highly active sites for CO 2 reduction at low overpotentials. In situ Raman spectroscopic analysis and density functional theory computation reveal that the Cu + /Cu 0 interfaces offer high *CO surface coverage and lower the activation energy barrier for *CO dimerization, which, in synergy, facilitates CO 2 reduction to C 2 H 4 at low overpotentials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantifying the impact of temporal analysis of products reactor initial state uncertainties on kinetic parameters

The temporal analysis of products (TAP) reactor, a transient kinetic tool, provides users with information as the catalyst state evolves. However, the state of the art for TAP uncertainty quantification only considers the experimental noise present in the outlet flow signal. Additional sources of uncertainty, including, but not limited to, initial surface coverages, the catalyst zone location, the inert void fraction, and the gas pulse intensity and pulse delay, are not included. For this reason, a framework for quantifying all uncertainty sources present in TAP experiments is presented and applied to a carbon monoxide oxidation case study. Herein, two methods for quantifying these sources of uncertainty are introduced. The first utilizes initial state sensitivities to approximate the parameter variances, as well as to provide insights into the structural certainty of the model. The second generates parameter confidence distributions through an ensemble-based sampling algorithm. This initial state covariance matrix can ultimately be merged with the experimental noise covariance matrix, providing a unified description of the parameter uncertainties for a single TAP experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Three-dimensional phenotyping of peach tree-crown architecture utilizing terrestrial laser scanning

Tree training systems for temperate fruit have been developed throughout history by pomologists to improve light interception, fruit yield, and fruit quality. These training systems direct crown and branch growth to specific configurations. Quantifying crown architecture could aid the selection of trees that require less pruning or that naturally excel in specific growing/training system conditions. Regarding peaches [Prunus persica (L.) Batsch], access tools such as branching indices have been developed to characterize tree-crown architecture. However, the required branching data (BD) to develop these indices are difficult to collect. Traditionally, BD have been collected manually, but this process is tedious, time-consuming, and prone to human error. These barriers can be circumnavigated by utilizing terrestrial laser scanning (TLS) to obtain a digital twin of the real tree. TLS generates three-dimensional (3D) point clouds of the tree crown, wherein every point contains 3D coordinates (x, y, z). To facilitate the use of these tools for peach, we selected 16 young peach trees scanned in 2021 and 2022. These 16 trees were then modeled and quantified using the open-source software TreeQSM. As a result, “in silico” branching and biometric data for the young peach trees were calculated to demonstrate the capabilities of TLS phenotyping of peach tree-crown architecture. The comparison and analysis of field measurements (in situ) and in silico BD, biometric data, and quantitative structural model branch uncertainty data were utilized to determine the reconstructive model’s reliability as a source substitute for field measurements. Mean average deviation when comparing young tree (YT) height was approx. 5.93%, with crown volume was approx. 13.26% across both 2021 and 2022. All point clouds of the YTs in 2022 showed residuals lower than 12 mm to cylinders fitted to all branches, and mean surface coverage greater than 40% for both the trunk and primary branching orders.

09 BIOMASS FUELS↗
DOE OSTI2023

Mixed Nanosphere Assemblies at a Liquid–Liquid Interface

The in-plane packing of gold (Au), polystyrene (PS), and silica (SiO 2 ) spherical nanoparticle (NP) mixtures at a water–oil interface is investigated in situ by UV–vis reflection spectroscopy. All NPs are functionalized with carboxylic acid such that they strongly interact with amine-functionalized ligands dissolved in an immiscible oil phase at the fluid interface. This interaction markedly increases the binding energy of these nanoparticle surfactants (NPSs). The separation distance between the Au NPSs and Au surface coverage are measured by the maximum plasmonic wavelength (λ max ) and integrated intensities as the assemblies saturate for different concentrations of non-plasmonic (PS/SiO 2 ) NPs. Further, as the PS/SiO 2 content increases, the time to reach intimate Au NP contact also increases, resulting from their hindered mobility. λ max changes within the first few minutes of adsorption due to weak attractive inter-NP forces. Additionally, a sharper peak in the reflection spectrum at NP saturation reveals tighter Au NP packing for assemblies with intermediate non-plasmonic NP content. Grazing incidence small angle X-ray scattering (GISAXS) and scanning electron microscopy (SEM) measurements confirm a decrease in Au NP domain size for mixtures with larger non-plasmonic NP content. The results demonstrate a simple means to probe interfacial phase separation behavior using in situ spectroscopy as interfacial structures densify into jammed, phase-separated NP films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Traction-separation response of bilayer graphene interfaces: The role of an intercalated single atomic layer of water molecules and hydroxyl groups

Molecular dynamics simulations of the normal and shear traction-separation response of dry and wet bilayer graphene interfaces were performed. The influence of a single, atomic layer of water molecules sandwiched between graphene layers and hydroxyl functionalization on one or both layers were investigated. Hydroxyl groups provided a shielding effect during normal separation while favoring stick-slip friction under sliding conditions. The single, atomic layer of water molecules confined between hydrophilic and asymmetric hydrophobic/hydrophilic surfaces was found to ease sliding friction. The mechanisms arose from the balance between the attractive and repulsive graphene/water interactions through bridges of single water molecules between the two surfaces and the structure of the water monolayer under confinement for which an out-of-plane water/water hydrogen bond network could not be developed. The single, atomic layer of water molecules reduced the sliding friction the most when both surfaces were hydrophilic and lowered the sliding friction of the asymmetric hydrophobic/hydrophilic interfaces to that when both surfaces were hydrophobic. An optimal hydroxyl surface coverage of less than 10% may exist for efficient water lubrication, with diminishing effect with increasing number of hydroxyl groups. Finally, the findings offer a design strategy for assembling bilayer graphene interfaces with tailored friction and sliding contact properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Kinetic study of hydrogen transport in graphite under molten fluoride salt environment

Here, in this work, a kinetic model, which describes the reactions occurring during the hydrogen charging process on a graphite surface, was optimized on Electrochemical Impedance Spectroscopic (EIS) to study the entry of hydrogen into graphite in high temperature molten FLiNaK salt. The results show that the rate constants of k 1 increases with decreasing applied potential (becoming more negative), and k 2 and k 3 are independent of the applied potential. At the same charging potential, all the three rate constants are independent of the water concentration in the FLiNaK salt. The surface coverage of absorbed hydrogen increases with decreasing the charging potential and increasing the moisture content in the salt. The adsorption efficiency of hydrogen increases with increasingly charging potential and decreases with increasing moisture content of the FLiNaK salt. These results demonstrate that EIS is a promising technique for measuring the kinetic parameters for hydrogen transport in graphite under molten fluoride salt environment.

EIS↗