Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Network Management”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A proposed architecture for a satellite-based mobile communications network - The lowest three layers

Architecture for a commercial mobile satellite network is proposed. The mobile satellite system (MSS) is composed of a network management center, mobile terminals, base stations, and gateways; the functions of each component are described. The satellite is a 'bent pipe' that performs frequency translations, and it has multiple UHF beams. The development of the MSS design based on the seven-layer open system interconnection model is examined. Consideration is given to the functions of the physical, data link, and network layers and the integrated adaptive mobile access protocol.

Yan, T. Y.↗

Signalling design and architecture for a proposed mobile satellite network

In a frequency-division/demand-assigned multiple-access (FD/DAMA) architecture, each mobile subscriber must make a connection request to the Network Management Center before transmission for either open-end or closed-end services. Open-end services are for voice calls and long file transfer and are processed on a blocked-call-cleared basis. Closed-end services are for transmitting burst data and are processed on a first-come first-served basis. This paper presents the signalling design and architecture for non-voice services of an FD/DAMA mobile satellite network. The connection requests are made through the recently proposed multiple channel collision resolution scheme which provides a significantly higher throughput than the traditional slotted ALOHA scheme. For non-voice services, it is well known that retransmissions are necessary to ensure the delivery of a message in its entirety from the source to destination. Retransmission protocols for open-end and closed-end data transfer are investigated. The signal structure for the proposed network is derived from X-25 standards with appropriate modifications. The packet types and their usages are described in this paper.

Yan, T.-Y.↗

Network design consideration of a satellite-based mobile communications system

Technical considerations for the Mobile Satellite Experiment (MSAT-X), the ground segment testbed for the low-cost spectral efficient satellite-based mobile communications technologies being developed for the 1990's, are discussed. The Network Management Center contains a flexible resource sharing algorithm, the Demand Assigned Multiple Access scheme, which partitions the satellite transponder bandwidth among voice, data, and request channels. Satellite use of multiple UHF beams permits frequency reuse. The backhaul communications and the Telemetry, Tracking and Control traffic are provided through a single full-coverage SHF beam. Mobile Terminals communicate with the satellite using UHF. All communications including SHF-SHF between Base Stations and/or Gateways, are routed through the satellite. Because MSAT-X is an experimental network, higher level network protocols (which are service-specific) will be developed only to test the operation of the lowest three levels, the physical, data link, and network layers.

Yan, T.-Y.↗

A FD/DAMA network architecture for the first generation land mobile satellite services

A frequency division/demand assigned multiple access (FD/DAMA) network architecture for the first-generation land mobile satellite services is presented. Rationales and technical approaches are described. In this architecture, each mobile subscriber must follow a channel access protocol to make a service request to the network management center before transmission for either open-end or closed-end services. Open-end service requests will be processed on a blocked call cleared basis, while closed-end requests will be processed on a first-come-first-served basis. Two channel access protocols are investigated, namely, a recently proposed multiple channel collision resolution scheme which provides a significantly higher useful throughput, and the traditional slotted Aloha scheme. The number of channels allocated for either open-end or closed-end services can be adaptively changed according to aggregated traffic requests. Both theoretical and simulation results are presented. Theoretical results have been verified by simulation on the JPL network testbed.

Yan, T.-Y.↗

Best Practices for Grid Communications

As the grid evolves, the communications architecture will need to evolve with it. That architecture affords a structured means by which the evolving complexities of the modern electric grid can be managed. This document provides best practices that can be implemented in the grid of today and evolve towards the grid and grid architecture of the future. The evolving grid and its control communications increasingly rely on commercial communications providers and a variety of technologies, from wireless (e.g., 5G, microwave, Wi-Fi) to wireline (fiber, copper) to radio communications (P25, other repeater-based systems), and all these communications systems rely on electric power. A reliable and resilient grid must account for this complex set of interdependencies in its planning activities, especially those involving restoration and recovery. The participation of all relevant parties in both planning and exercising of plans can prevent unexpected conditions that impede the reliable operation and recovery of the grid. Best practices for grid communications include using a Network Management System to document the operational state, define and monitor baselines, detect changes, and accelerate response to abnormalities. If transitioning from SONET to IP/packet-based systems, translating grid requirements into communications requirements for latency, bandwidth and throughput, IP packet delay variation, packet loss, and availability should inform and drive technology planning and selection as well as that communication system’s Quality of Service (QoS) policies and Service Level Agreements (SLAs). Secure and reliable timing is another key component of a reliable and resilient grid that can operate through adverse events. A trusted internal NTP configuration, an integrated and diverse timing delivery system, optimizing the timing architecture based on the transport technologies of the communications system, and using established standards can deliver the level of timing accuracy required by a range of time-sensitive power system applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Development of machine learning framework for interface force closures based on bubble tracking data

Interfacial force closures in the two-fluid model play a critical role for the predictive capabilities of void fraction distribution. However, the practices of interfacial force modeling have long been challenged by the inherent physical complexity of the two-phase flows. The rapidly expanding computational capabilities in the recent years have made high-fidelity data from the interface-captured direct numerical simulation become more available, and hence potential for data-driven interfacial force modeling has prevailed. In this work, we established a data-driven modeling framework integrated to the HZDR multiphase Eulerian-Eulerian framework for computational fluid dynamics simulations. The data-driven framework is verified in a benchmark problem, where a feedforward neural network managed to capture the non-linear mapping between bubble Reynolds number and drag coefficient and reproduce the void distribution resulting from the baseline model in the test case. The second focus is on utilizing the bubble tracking data set to form a closure for the bubble drag in the turbulent bubbly flow, in which the drag coefficient is set to be correlated with the bubble Reynolds number and the Eötvös number. Pseudo-steady state filtering in the Frenet Frame was carried out to obtain the drag coefficient from the turbulent bubbly flow data. The performance of the data-driven drag model is also examined through a case study, where improvement of model’s prediction near-wall is regarded necessary. In conclusion, discussion and further plans of investigation are provided.

42 ENGINEERING↗

Federal Workplace Charging Program Guide

The 2015 Fixing America's Surface Transportation (FAST) Act authorizes the installation, operation, and maintenance of electric vehicle supply equipment (EVSE) for the purpose of recharging employees' privately owned vehicles (POVs) under the custody or control of the General Services Administration (GSA) or a Federal agency. It requires the collection of fees to recover the costs of installing, operating, and maintaining this equipment and imposes reporting requirements. This program guide reviews those requirements, excerpts the relevant language in Appendix A, and describes when and how fees may be required to cover costs of electricity, network costs, EVSE units, and installations in various scenarios. This program guide is designed to support Federal agencies developing and refining workplace charging programs for employee POVs. While it provides guidance and best practices, it does not replace agencywide policies or agency-specific legal counsel. It contains a roadmap for agency workplace charging programs and defines roles and responsibilities. This guide explains how to determine the number of POVs likely to charge at a given site and contains a sample employee survey in Appendix B. It reviews EVSE planning, including unit selection and acquisition, charger location(s), accounting for available power capacity, using existing infrastructure, and funding an incentive program. It also discusses the costs associated with EVSE acquisition, installation, and network management. These costs inform the subsequently provided information, which describes how to amortize costs to determine appropriate fees for each charging session. The final two sections of this guide address aspects of ongoing program management that the facility coordinator should consider and the reporting requirements associated with the FAST Act. The insights in this guide are applicable to all agency-owned and GSA-leased buildings or facilities offering the use of EVSE or a 120-volt receptacle for the purpose of recharging an employee's POV. However, the FAST Act requirements typically do not apply to any building or facility operated and maintained by a third-party vendor offering the use of EVSE as part of a commercial building lease unless the agency is managing the station and/or energy on behalf of the building and collecting POV fees.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

ERISTAR: Earth Resources Information Storage, Transformation, Analysis, and Retrieval

The National Aeronautics and Space Administration (NASA) and the American Society for Engineering Education (ASEE) have sponsored faculty fellowship programs in systems engineering design for the past several years. During the summer of 1972 four such programs were conducted by NASA, with Auburn University cooperating with Marshall Space Flight Center (MSFC). The subject for the Auburn-MSFC design group was ERISTAR, an acronym for Earth Resources Information Storage, Transformation, Analysis and Retrieval, which represents an earth resources information management network of state information centers administered by the respective states and linked to federally administered regional centers and a national center. The considerations for serving the users and the considerations that must be given to processing data from a variety of sources are described. The combination of these elements into a national network is discussed and an implementation plan is proposed for a prototype state information center. The compatibility of the proposed plan with the Department of Interior plan, RALI, is indicated.

Source record↗

Space shuttle program information control and retrieval system feasibility study report

The feasibility of having a common information management network for space shuttle data, is studied. Identified are the information types required, sources and users of the information, and existing techniques for acquiring, storing and retrieving the data. The study concluded that a decentralized system is feasible, and described a recommended development plan for it.

Lingle, C. P.↗

Control Data ICEM: A vendors IPAD-like system

The IPAD program's goal which was to integrate aerospace applications used in support of the engineering design process is discussed. It is still the key goal, and has evolved into a design centered around the use of data base management, networking, and global user executive technology. An integrated CAD/CAM system modeled in part after the IPAD program and containing elements of the program's goals was developed. The integrated computer aided engineering and manufacturing (ICEM) program started with the acquisition of AD-2000 and Synthavision. The AD-2000 has evolved to a production geometry creation and drafting system which is called CD/2000. Synthavision has grown to be a full scale 3-dimensional modeling system, the ICEM Modeler.

Feldman, H. D.↗

Agribusiness and space: No limits to growth

Technological developments responding to world food needs are examined. It is noted that agribusiness technology has become more space-related in recent years. Although crops forecasting and improvements in yield (the green revolution) were developed prior to the space era, it would be unthinkable today to ignore the contributions of operational meteorological and communications satellites and experimental Earth observation satellites in agribusiness. Space-driven communications now permit national agribusiness database management networks, with a significant portion of the data being space-derived. In demonstration experiments, space communications were shown to improve those aspects of the food problem related to education and communications.

Montgomery, O. L.↗

An integrated voice and data multiple-access scheme for a land-mobile satellite system

An analytical study is performed of the satellite requirements for a land mobile satellite system (LMSS). The spacecraft (MSAT-X) would be in GEO and would be compatible with multiple access by mobile radios and antennas and fixed stations. The FCC has received a petition from NASA to reserve the 821-825 and 866-870 MHz frequencies for the LMSS, while communications with fixed earth stations would be in the Ku band. MSAT-X transponders would alter the frequencies of signal and do no processing in the original configuration considered. Channel use would be governed by an integrated demand-assigned, multiple access protocol, which would divide channels into reservation and information channels, governed by a network management center. Further analyses will cover tradeoffs between data and voice users, probability of blocking, and the performance impacts of on-board switching and variable bandwidth assignment. Initial calculations indicate that a large traffic volume can be handled with acceptable delays and voice blocking probabilities.

Li, V. O. K.↗

NASA's Pilot Land Data System development program

The NASA Pilot Land Data System (PLDS) project is intended to enhance the effectiveness of data processing capabilities used by researchers applying remote sensing data in land science research. Two sites in the centerminous U.S. have been selected as study areas scanned by Landsat, Nimbus and GOES instruments. The data will be analyzed by teams of researchers representing different fields of expertise. The PLDS program will explore data management, networking and communications, system access capabilities, land analysis software, special processes and overall systems engineerng. The data will be processed by researchers working interactively through remote supermicrocomputer workstations using a variety of operating systems and on-site software capabilities.

Price, R. D.↗

An optimized bandwidth efficient demand assigned protocol for integrated Mobile Satellite Services

This paper describes the design of a demand assigned protocol based on bandwidth efficiency for integrated services of a Mobile Satellite System (MSS). An MSS provides data (closed-ended) and voice (open-ended) communications services for a large number of mobile users dispersed over a wide geographical area. Each mobile requests its desired service through a designated set of channels to a network management center. Either pure or slotted ALOHA random access scheme can be used to make connection requests, while data and voice communications are demand assigned. All channels have equal bandwidth and can be adaptively used for reservation requests, data connections or voice connections to maximize the bandwidth utilization. In this paper, perfect communications channels are assumed. It has been shown that, for the case considered, using the slotted ALOHA scheme for making connection requests can save about 30 percent on the total number of channels over using the pure ALHOA scheme.

Yan, T.-Y.↗

A retransmission protocol for the message service of a land mobile satellite experiment

The objectives of NASA's land mobile satellite experiments are discussed. The assigned multiple access protocol combined with a retransmission scheme is to provide reliable transmission of data messages from mobiles to base stations (BSs). The sequences for communication between mobiles and BSs, mobiles and the network management center (NMC), and BSs and NMC are examined, and an example of mobiles/BSs communication is provided. The performance of the retransmission protocol and data message reservation and message channels delays are analyzed. A bit error rate of 0.001 is observed for satellite channels in a mobile environment and the message error probability is between 0-0.1.

Yan, T.-Y.↗

Proof that timing requirements of the FDDI token ring protocol are satisfied

The fiber distributed data interface (FDDI) is an ANSI draft proposed standard for a 100 Mbit/s fiber-optic token ring. The FDDI timed token access protocol provides dynamic adjustment of the load offered to the ring, with the goal of maintaining a specified token rotation time and of providing a guaranteed upper bound on time between successive arrivals of the token at a station. FDDI also provides automatic recovery when errors occur. The bound on time between successive token arrivals is guaranteed only if the token rotates quickly enough to satisfy timer requirements in each station when all ring resources are functioning properly. Otherwise, recovery would be initiated unnecessarily. The purpose of this paper is to prove that FDDI timing requirements are satisfied, i.e., the token rotates quickly enough to prevent initiation of recovery unless there is failure of a physical resource or unless the network management entity within a station initiates the recovery process.

Johnson, Marjory J.↗

A computer-based specification methodology

Standard practices for creating and using system specifications are inadequate for large, advanced-technology systems. A need exists to break away from paper documents in favor of documents that are stored in computers and which are read and otherwise used with the help of computers. An SADT-based system, running on the proposed Space Station data management network, could be a powerful tool for doing much of the required technical work of the Station, including creating and operating the network itself.

Munck, Robert G.↗

Proceedings of the Mobile Satellite System Architectures and Multiple Access Techniques Workshop

The Mobile Satellite System Architectures and Multiple Access Techniques Workshop served as a forum for the debate of system and network architecture issues. Particular emphasis was on those issues relating to the choice of multiple access technique(s) for the Mobile Satellite Service (MSS). These proceedings contain articles that expand upon the 12 presentations given in the workshop. Contrasting views on Frequency Division Multiple Access (FDMA), Code Division Multiple Access (CDMA), and Time Division Multiple Access (TDMA)-based architectures are presented, and system issues relating to signaling, spacecraft design, and network management constraints are addressed. An overview article that summarizes the issues raised in the numerous discussion periods of the workshop is also included.

Dessouky, Khaled↗