Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRODEPOSITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Copper Electrodeposition from Deep Eutectic Solvents—Voltammetric Studies Providing Insights into the Role of Substrate: Platinum vs Glassy Carbon

We report on the effect of the substrate on electrochemical deposition of Cu from deep eutectic solvent ethaline. We investigated the polarization behavior during electrodeposition of Cu on Pt and glassy carbon (GC) from both Cu 2+ and Cu + containing ethaline using cyclic voltammetry (CV). Formation of bulk Cu deposits on both substrates underwent nucleation and growth processes; however, the nucleation was considerably sluggish on GC compared to Pt. While experiments in Cu+ solutions indicated that coalescence of Cu islands on Pt is a slow process and that its surface may not be fully covered by Cu, such determination of Cu coverage could not be made on GC. Cu dissolution is also slower from GC than from Pt. It was observed that CV of Cu deposition on GC is influenced by the surface preparation method. Since ethaline has high chloride concentration, a parallel study in aqueous 3 M NaCl solution was conducted in order to examine the influence of the chloride medium on the electrodeposition process. Lastly, this revealed that electrodeposition in both media occurred in the same manner but with different charge and mass transfer rates caused by the differences in viscosity and chloride concentrations of the two solutions.

25 ENERGY STORAGE↗

Epitaxial Electrodeposition of Fe with Controlled In-Plane Variants for a Reversible Metal Anode in an Aqueous Electrolyte

The development of reversible metal anodes is a key challenge for advancing aqueous battery technologies, particularly for scalable and safe stationary energy storage applications. Here, in this study, we demonstrate a strategy to realize epitaxial electrodeposition of iron (Fe) on single-crystal copper (Cu) substrates in aqueous electrolytes. We compare the electrodeposition behavior of Fe on polycrystalline and single-crystalline Cu substrates, revealing that the latter enables highly uniform, dense, and crystallographically aligned Fe growth. Comprehensive electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) analysis confirms the formation of Fe with specific out-of-plane and in-plane orientations, including well-defined rotational variants. Our findings highlight that epitaxial electrodeposition of Fe can suppress dendritic growth and significantly enhance Coulombic efficiency during plating/stripping cycles. This approach bridges fundamental crystallography with practical electrochemical performance, providing a pathway toward high-efficiency aqueous batteries utilizing Earth-abundant materials.

aqueous battery↗

Composition-Nanoarchitecture-Performance Analysis of High Energy Density Electrodeposited Silicon for Lithium-Ion Battery Anodes

Electrodeposition of silicon (Si) was previously demonstrated as a promising method for fabricating 3D-structured lithium-ion battery anodes. However, the relationship between the electrochemical performance and chemical composition of the relatively impure electrodeposited silicon is not well understood. Here, we report the electrodeposition of a Si-dominant active material (EDEP-Si) onto 3D-structured nickel (Ni) scaffolds and systematically compare the electrochemical properties, elemental composition, atomistic Si coordination, and molecular structure of EDEP-Si with high-purity amorphous Si grown via static chemical vapor deposition. Despite the considerable amount of carbon (9–11 at %) and oxygen (42–44 at %) present in EDEP-Si, the cycling stability and high reversible specific capacity are remarkably similar to those of CVD-Si on a silicon basis (~2400 mA h/g-Si after 100 cycles). The primary difference is that EDEP-Si exhibits reduced cycling efficiency over the first 10–20 cycles. Reactions between carbon and, more importantly, oxygen in EDEP-Si with lithium are likely responsible for the reduced early cycle performance and lower capacity of the total deposit. Finally, our observations suggest ultrapure Si is not necessary for high electrochemical access to reversible charge storage, although limiting the presence of incorporated impurity species would improve energy density and first cycle efficiency.

25 ENERGY STORAGE↗

Electrodepositing Textured Sn Film as a Highly Reversible Anode for Aqueous Batteries

Electrodepositing metal materials in large capacity, at low potential, and with high reversibility serves as the foundation for any aqueous rechargeable battery chemistry to realize the promises of high energy, low cost, and high safety. However, such a foundation is not solid because of the natural tendency of metals to form irregular, nonplanar, and often dendritic morphologies during electrochemical crystallization, which is further amplified in an acidic environment due to the faster kinetics of the coupled proton and mass-transport processes between hydrated metal ions and free metal atoms. As a typical representative, tin metal (Sn 0 ) has potential to achieve high energy in acidic batteries, but its nonuniform large-particle morphology, obtained from traditional electrodeposition, leads to dead Sn 0 formation and deteriorating reversibility, accompanied by the sustained hydrogen evolution reaction (HER) and active Sn 0 loss. Here, in this study, we report quaternary onium salts as effective interfacial cocations that, via selective adsorption, steadily texturize Sn 0 deposition along the (211) plane, which is intrinsically inert to the HER, thus regulating the film deposition process by favoring the formation of planar Sn 0 film. Such Sn 0 film brings exceptional reversibility in acidic electrolytes, which translates into sustained cycling stability at applicable areal capacities in both anode-half cells (similar to 1500 deposition/dissolution cycles at 5 mAh cm -2 ) and full cells (350 charge/discharge cycles at 5 mAh cm -2 ). Textured electrodeposition with intrinsic HER-suppression capability provides a universal solution for diverse metal anode materials in rechargeable energy-dense aqueous batteries.

Sn metal↗

Thermodynamic Control of Interface Directs MnO 2 Nucleation Chemistry for Dense and Conformal Electrodeposition

Manganese dioxide (MnO 2 ) is widely recognized as a promising material for high-energy-density energy storage systems due to its broad applicability and facile electrodeposition. However, achieving uniform, thin, and high-mass-loading MnO 2 coatings on high-surface-area electrodes remains a significant challenge. Conventional electrodeposition methods typically yield nonuniform, thick layers with poor conductivity and limited material utilization, restricting their practical use. Here, we uncover a thermodynamically engineered vanadyl/pervanadyl (VO 2+ /VO 2 + ) interface that fundamentally reshapes MnO 2 electrodeposition chemistry, enabling highly uniform and dense coatings. Here, combining in situ AFM measurement, Classical Nucleation Theory, and Johnson–Mehl–Avrami–Kolmogorov modeling, we show that this interface reduces early-stage detectable MnO 2 island size by 35-fold and shifts the MnO 2 growth from diffusion-limited to reaction-limited progressive nucleation. This thermodynamically controlled interface yields highly dense and conformal MnO 2 films with record-high mass loading of 241 mg cm –2 (1607 mg cm –3 ) on 3D-printed graphene aerogels, without compromising porosity or inducing thickness gradient. As a prototype demonstration, the resulting MnO 2 electrodes deliver record-setting volumetric performance in both capacitors (106 F cm –3 ) and Zn//MnO 2 pouch cells (162 mAh cm –3 ). Beyond energy storage, our findings demonstrate the significance of thermodynamic interface control in MnO 2 nucleation chemistry for achieving dense and uniform coatings on various substrates, with implications for electrocatalysis, semiconductor processing, and advanced materials manufacturing.

Batteries↗

Homogeneous growth of antidot structures electrodeposited on Si by nanosphere lithography

The characteristics of cobalt antidot structures, electrodeposited on Si by nanosphere lithography, is investigated by analysis of current transients and optical and atomic force microscopy. Polystyrene colloidal masks of 1 ML (monolayer) or a maximum of 2, with sphere diameters ranging between 165 and 600 nm were fabricated by spin coating. For masks partially covered with bilayer regions, it is shown that the volume of deposited material in bilayer areas corresponds to only 5% of the cobalt deposited in the monolayer areas. This drastic reduction in the deposition rate affects the quality of the deposit. Therefore, the use of colloidal masks of homogeneous thickness is necessary to guarantee the electrodeposition of nanostructured films of controlled thickness. It will also be shown that the use of high quality colloidal masks yields a reproducible electrodeposition process, enabling the use of the current transient as a reliable tool for assessment of the deposition process.

36 MATERIALS SCIENCE↗

Enhanced electrocatalytic activity of the Au-electrodeposited Pt nanoparticles-coated conducting oxide for the quantum dot-sensitized solar cells

Au was electrodeposited potentiostatically at 0.3 V for 5 min on nanoporous Pt nanoparticle-coated F-doped SnO{sub 2} (FTO/Pt) substrates. For comparison, Au-electrodeposited FTO (FTO/Au) and Au-uncoated FTO/Pt were prepared. FTO/Au showed large-sized Au clusters dispersed sparsely over FTO, which resulted in lower electrocatalytic activity than FTO/Pt. In contrast, FTO/Pt exhibited poor stability unlike FTO/Au due to poisoning by the adsorption of sulfur species. The Au-electrodeposited FTO/Pt (FTO/Pt/Au) consisted of small Au clusters deposited over the entire area of Pt due to the effective Au nucleation provided by nanoporous metallic Pt. FTO/Pt/Au exhibited enhanced electrocatalytic activity and excellent stability because the small Au particles well-dispersed over the nanoporous metallic Pt network provided numerous electrochemical reaction sites, and the Pt surface was not exposed to the electrolyte. When FTO/Pt/Au was used as the counter electrode (CE) of a quantum dot-sensitized solar cell, the significantly enhanced electrocatalytic activity of the FTO/Pt/Au CE facilitated the reduction reaction of S{sub n}{sup 2− }+ 2e{sup −} (CE) → S{sub n−1}{sup 2−} + S{sup 2−} at the CE/electrolyte interface, resulting in a significantly hindered recombination reaction, S{sub n}{sup 2− }+ 2e{sup −} (TiO{sub 2} in the photoanode) → S{sub n-1}{sup 2−} + S{sup 2−}, and significantly improved overall energy conversion efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrodeposition of Fe{sub 3}O{sub 4} layer from solution of Fe{sub 2}(SO{sub 4}){sub 3} with addition ethylene glycol

The electrodeposition of Fe{sub 3}O{sub 4} layer from the solution Fe{sub 2}(SO{sub 4}){sub 3} with the addition of ethylene glycol on Indium Tin Oxide (ITO) substrate has been performed. The electrodeposition was carried out using a voltage of 5 volts for 120 seconds, with and without the addition of 2% wt ethylene glycol. Significant effects of temperature on the resulting the samples is observed when they are heated at 400 °C. Structural characterization using X-ray diffraction (XRD) shows that all samples produce a layer of Fe{sub 3}O{sub 4} with particle size less than 50 nanometers. The addition of ethylene glycol and the heating of the sample causes a shrinkage in particle size. The scanning electron microscopy (SEM) characterization shows that Fe{sub 3}O{sub 4} layer resulting from the process of electrodeposition of Fe{sub 2}(SO{sub 4}){sub 3} without ethylene glycol, independent of whether the sample is heated or not, is uneven and buildup. Layer produced by the addition of ethylene glycol without heating produces spherical particles. On contrary, when the layer is heated the spherical particles transform to irregularly-shaped particles with smaller size.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrodeposited Biaxially Textured Buffer Layers for YBCO Superconductors

Non-vacuum electrodeposition (ED) was used to prepare simplified Gd{sub 2}O{sub 3}/Gd{sub 2}Zr{sub 2}O{sub 7} and CeO{sub 2}/Gd{sub 2}Zr{sub 2}O{sub 7} buffer layers on a Ni-W substrate. Post-annealing conditions of electrodeposited precursor films were optimized to obtain high-quality biaxially textured buffer layers. The buffer layers were characterized by X-ray diffraction, optical profiling, and transmission electron microscopy (TEM). The effect of the cap layer thickness on the surface morphology and texture of the buffers was also studied. The microstructure of CeO{sub 2}/Gd{sub 2}Zr{sub 2}O{sub 7} was analyzed and compared to Gd{sub 2}O{sub 3}/Gd{sub 2}Zr{sub 2}O{sub 7}. The high-resolution TEM shows biaxially textured crystalline elctrodeposited Gd{sub 2}O{sub 3} and CeO{sub 2} cap layers on the electrodeposited Gd{sub 2}Zr{sub 2}O{sub 7} layers without any defects. YBa{sub 2}Cu{sub 3}O{sub 7}-delta (YBCO) superconductor was deposited by pulsed laser deposition (PLD) on the simplified ED-Gd{sub 2}O{sub 3}/Gd{sub 2}Zr{sub 2}O{sub 7} and ED-CeO{sub 2}/Gd{sub 2}Zr{sub 2}O{sub 7} buffers. Transport current density of 3.3 MA/cm{sup 2} at 77 K was obtained for PLD YBCO deposited on ED-Gd{sub 2}O{sub 3}/Gd{sub 2}Zr{sub 2}O{sub 7} buffer layers.

14 SOLAR ENERGY↗

Communication—Electrodeposition of Indium Directly on Silicon

Direct electrodeposition of indium onto silicon paves the way for advances in microelectronics, photovoltaics, and optoelectronics. Indium is generally electrodeposited onto silicon utilizing a physically or thermally deposited metallic seed layer. Eliminating this layer poses benefits in microelectronics by reducing resistive interfaces and in vapor-liquid-solid conversion to III-V material by allowing direct contact to the single-crystal silicon substrate for epitaxial conversion. We investigated conditions to directly electrodeposit indium onto n-type Si(100). We illustrate that a two-step galvanostatic plating at low temperatures can consistently produce smooth, continuous films of indium over large areas, in bump morphologies, and conformally into inverted pyramids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Robust Large-Scale Dynamic Windows using Reversible Metal Electrodeposition

This project funded the study and development of dynamic windows based on reversible metal electrodeposition (RME). Dynamic windows allow user control over light and heat flow into and out of buildings, which offer both advantages in building aesthetics (with worker productivity improvement of 2%) and energy efficiency (up to 20% savings) compared to static controls such as low emissivity coatings and blinds/shades. Despite these advantages, dynamic windows, which traditionally rely on electrochromic metal oxides or conductive organic molecules for light modulation have failed to significantly impact the market due to issues related to cost, color, and optical dynamic range. Dynamic windows based on reversible metal electrodeposition (RME) are an exciting alternative approach and have the potential to overcome the issues associated with traditional technologies. A RME dynamic window is an electrochemical cell that modulates light using the reversible electrodeposition of metal on and off a transparent conducting oxide (TCO), which serves as the working electrode. The electrolyte has nearly colorless metal salts dissolved, and application of a cathodic potential on the TCO reduces the metal cations across the TCO surface to their metallic form, making a thin film that is efficient at blocking out light. A reverse in polarity oxidizes the metal, where it dissolves into solution, returning the window back to transparent. The counter electrode typically employed is a metal mesh, which is used to balance the electrochemical reactions happening on the TCO working electrode. These RME dynamic windows have the largest dynamic range (capable of reaching <<0.1% transmission) with color neutral tinting of any existing technology using solution processed techniques, which positions the technology as a promising candidate to penetrate the residential market. We have successfully scaled up the windows from 25 cm2 to 929 cm 2 , and we have demonstrated significant improvements to both the cycle life (10,000 cycles in a 3-electrode half-cell) and shelf life (>1 month) of our windows. We have published our work in high impact journals (6 published and 2 manuscripts in prep), filed 5 patents, and have incorporated TYNT Technologies to commercialize the technology.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Pulse Electrodeposition for Carbonate-Rich Deposits from Seawater

Seawater electrodeposition is gaining renewed interest in the context of sustainable development, both to build climate-resilient coastal infrastructure and for ocean-based decarbonization applications. Most of the applications benefit from CaCO 3 -rich deposits, but constant-voltage electrodeposition results in a mixture of CaCO 3 and Mg(OH) 2 , especially at higher voltages where precipitation rates are more desirable. The use of pulse voltages can help control interfacial pH that dictates the precipitation reactions. Here, we explore the use of pulse electrodeposition as a function of pulse frequency and duty cycle to control deposit composition. The most CaCO 3 -rich deposits were obtained under 10 Hz frequency and 10% duty cycle conditions for the voltage window investigated (-0.8 V to -1.2 V vs. SCE). While pulsing the voltage increases the amount of CaCO 3 deposited, the energy required per gram of CaCO 3 is significantly higher (14.5×) when compared to the base case of applying a constant voltage of -0.8 V vs. SCE. Further optimization of pulse conditions, electrode materials, and system configuration could lead to finding parameters that result in exclusively carbonate deposits without compromising precipitation rates, which may prove to be more useful for corrosion protection, coastal infrastructure, and other applications in sustainable development.

54 ENVIRONMENTAL SCIENCES↗

2010 ELECTRODEPOSITION GORDON RESEARCH CONFERENCE, AUGUST 1-6, 2010

The 2010 Gordon Conference on Electrodeposition will present cutting-edge research on electrodeposition with emphasis on (i) advances in basic science, (ii) developments in next-generation technologies, and (iii) new and emerging areas. The Conference will feature a wide range of topics, from atomic scale processes, nucleation and growth, thin film deposition, and electrocrystallization, to applications of electrodeposition in devices including microelectronics, solar energy, and power sources. The Conference will bring together investigators from a wide range of scientific disciplines, including chemical engineering, materials science and engineering, physics, and chemistry. The Conference will feature invited speakers at the forefront of the field, and a late-breaking news session that will provide the opportunity for graduate students, post-docs, and junior faculty to participate. The collegial atmosphere of this Conference, with scientific talks and poster sessions, as well as opportunities for informal gatherings in the afternoons and evenings, provides an avenue for scientists from different disciplines to discuss current issues and promotes cross-disciplinary collaborations in the various research areas represented. The Conference will be held at Colby-Sawyer College, located in the Mt. Kearsarge-Lake Sunapee Region of New Hampshire. The surrounding mountains, forests, and lakes provide a beautiful setting for this conference. The attendance is limited so early application is strongly advised.

14 SOLAR ENERGY↗

Electrodeposition of Metals in Catalyst Synthesis: The Case of Platinum Monolayer Electrocatalysts

The concern about energy sources, their availability, and related environmental effects, is at an all time high. Proton Exchange Membrane Fuel Cells (PEMFCs) - with an efficiency higher than that of internal combustion engines, light weight, low operating temperature, and fast-start-up capability - are strong candidates for automotive applications. Transportation applications could be especially important in shaping up the new energy economy since they may entail a substantial decrease in the adverse environmental effects linked to the use of fossil fuels and prolong their availability. The largest portion of the cost of PEMFCs reflects the large amount of Pt needed in the cathode's catalytic layer due to the low catalytic activity of Pt for the oxygen reduction reaction (ORR). Recently, considerable advances have been made in fuel cell electrocatalysis yielding improved electrocatalysts, and increasing our understanding of the kinetics of the ORR in combination with significant advances in theoretical treatments. Some of these studies involved: (1) alloying Pt to synthesize bi-metallic catalysts, (2) core-shell nanoparticles catalysts, (3) the role of size, structure, and shape of nanoparticles, and (4) de-alloying of bimetallic alloys. However, a complete understanding of the ORR kinetics on Pt, the best single element catalyst, and of its low efficiency, is yet to be achieved. These problems, compounded with the high Pt content in current cathode catalysts, and with their gradual loss of performance under operating conditions, still hamper commercialization of fuel cells. In order to minimize the amount of noble metal electrocatalysts and maximize their utilization, while achieving high catalytic activity, numerous synthetic approaches have been attempted. The electrocatalysts were prepared using vacuum deposition methods, wet chemistry methods, or electrodeposition techniques. Electrodeposition in particular has several attractive features with respect to the application in catalyst synthesis such as simplicity of operation and ease of control of the deposition conditions. In this article we describe the application of metal electrodeposition in the synthesis of a new type of electrocatalysts comprising a Pt monolayer (Pt{sub ML}) on metal or alloy nanoparticles. The concept of Pt{sub ML} electrocatalysts offers a possible solution to the impasse caused by a slow ORR kinetics and the consequent large Pt content of conventional electrocatalysts. A Pt{sub ML} shell on a nanoparticle substrate core ensures that every Pt atom is available for catalytic activity; in other words, a Pt{sub ML} achieves the ultimate reduction in Pt loading and complete Pt utilization. Also, through geometric and electronic interaction with the substrate a Pt{sub ML} can change its electronic properties and be more active and durable than pure-Pt electrocatalysts.

30 DIRECT ENERGY CONVERSION↗

Solving partial differential equations on irregular domains with moving interfaces, with applications to superconformal electrodeposition in semiconductor manufacturing

We present a numerical algorithm for solving partial differential equations on irregular domains with moving interfaces. Instead of the typical approach of solving in a larger rectangular domain, our approach performs most calculations only in the desired domain. To do so efficiently, we have developed a one-sided multigrid method to solve the corresponding large sparse linear systems. Our focus is on the simulation of the electrodeposition process in semiconductor manufacturing in both two and three dimensions. Our goal is to track the position of the interface between the metal and the electrolyte as the features are filled and to determine which initial configurations and physical parameters lead to superfilling. We begin by motivating the set of equations which model the electrodeposition process. Building on existing models for superconformal electrodeposition, we develop a model which naturally arises from a conservation law form of surface additive evolution. We then introduce several numerical algorithms, including a conservative material transport level set method and our multigrid method for one-sided diffusion equations. We then analyze the accuracy of our numerical methods. Finally, we compare our result with experiment over a wide range of physical parameters.

97 MATHEMATICS AND COMPUTING↗

Kinetic Investigation by Batch Processing of Film Growth during the Electrodeposition of Titanium from Ethaline

Titanium electrodeposition as a technological advance has been out of reach due to the poor film quality obtained when using previously developed methods. This study shows that the electrodeposition of Ti is possible and feasible from the deep eutectic solvent ethaline. Moreover, this study shows through batch analysis that this deposition has temperature-dependent aspects that alter the film deposition kinetics upon modest heating. This ultraviolet–visible spectroscopic study is highlighting the more facile reduction of Ti 4+ to Ti 3+ and then to Ti 2+ at elevated temperatures. Understanding the underlying kinetics of electrodeposition opens up new venues for the application of this important metal.

36 MATERIALS SCIENCE↗

Electrodeposition of Technetium on Platinum for Thermal Ionization Mass Spectrometry (TIMS)

A novel device has been fabricated for the electrodeposition of technetium metal onto platinum filaments for thermal ionization mass spectrometric (TIMS) measurements. The ability of the device to focus the deposition to diameters of hundreds of micrometers on pre-mounted TIMS filaments coupled with the ease of use and simplicity of design permit for an extremely sensitive yet economical TIMS filament loading technique. Electrodeposition parameters were varied in order to maximize deposition efficiency. X-ray photoelectron spectroscopy (XPS) was used to confirm and characterize the technetium deposit. The technetium is deposited in the metallic state, although surface oxides in the 4+ and 7+ state form readily. Initial TIMS measurements of the electrodeposited technetium in the presence of a barium sulfate ionization enhancer show potential for excellent sensitivity.

Environmental Molecular Sciences Laboratory↗

Electrodeposition and Properties of Composites Consisting of Carbon Nanotubes and Copper

Copper–matrix–carbon nanotubes (Cu–CNTs) composite films were prepared in a Cu plating solution with multiwall carbon nanotubes (MWCNTs) using electrodeposition. The MWCNTs surface treatment method, electroplating solution system, electroplating conditions, heat treatment process and other parameters of this process are discussed. The results showed that MWCNTs purified by HCl treatment and dispersed by stearyltrimethylammonium bromide are more suitable as add-on materials for the preparation of the copper matrix composite films by electrodeposition. An appropriate heat treatment process was able to improve the structures and properties of the composite films. The final products showed that the MWCNTs were evenly distributed in the composite films and joined with the copper grains to form a mutually entangled mesh structure with excellent corrosion resistance (3.19 × 10{sup −8} Ω M) and a hardness of 53.5 HV. All this was possible through extensive optimization of the electrodeposition and post-treatment parameters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗