SEARCH · Engineering Papers

Results for “Additive Construction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Heat Pumps and Energy Recovering Ventilators in Northern Alaska

The intended purpose of this project was to bring alternative heat and ventilation options to rural communities off the road system in Northwestern Alaska. Most of the residents of these communities are reliant upon kerosene or other fossil fuels to provide heat to their homes. Our intention was to offer an alternative to using those sources by providing heat pumps to 45 homes in the communities of Elim and Koyuk. When projecting energy use for these units based on the fuel prices at the time, it was discovered that energy costs for heat pumps would equal or slightly exceed the costs of existing kerosene units. Secondly, as part of our E&l grant we installed 45 energy recovery ventilators (ERV’s) in those same homes. This was important given our experience over the years with moisture and comfort issues in most homes within this region. Exhaust-only systems are rarely used due to the high heating costs. Additionally, exhaust-only systems have a potential risk of back drafting due to tight building construction. Balanced systems like this eliminate that risk while improving indoor air quality. Another benefit to these types of systems is the fact that they help transfer heat from a single heat source equally throughout the building. Our overall goal was to offer new technology options to improve these structures and the families that reside in them where, given their location and extreme seasonal temperature swings, they have historically never been offered.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

Dynamic Analysis of a Six-Cable Parallel Robot for Automated Panelized Building Retrofits

Cable-Driven Parallel Robots (CDPRs) are highly suitable for automated panelized building retrofits, thanks to their compact footprint and high payload-to-weight ratio. A common CDPR configuration featuring eight cables, where the anchors form a rectangular prism in front of the building facade, offers a large wrench feasible workspace and good control versatility. However, installing upper anchor points requires additional support structures, such as towers or beams, increasing setup complexity and posing logistical challenges in construction settings. To mitigate these challenges, we propose a six-cable CDPR model specifically designed for automated panelized building retrofits. Although the feasible workspace is limited, our analysis shows that the proposed CDPR adequately covers the critical areas required for panel installation. To validate that the six-cable system can effectively transport the end effector to the desired installation pose, we calculated optimal trajectories based on a constrained dynamic model. The simulation results of the six-cable CDPR demonstrate promising potential for automated panelized building retrofits, effectively balancing simplicity, cost-effectiveness, and functionality.

Liu, Yifang [ORNL] (ORCID:0000000190817417)↗

DOE OSTI2025

Self-assembly of wood-based shape memory composites triggered by solar-thermal energy

Transporting and assembling large, complex structures poses significant challenges due to their size, geometry, and cost. Additionally, the installation sites are often inaccessible or hazardous for humans, necessitating self-assembling capabilities in these structures. To mitigate these challenges, we propose using 3D printing materials with shape memory effect (SME) for both transport and construction. This approach involves developing 3D modular components into flat sheets for easier transportation, and then self-assembling into 3D structures on-site using solar energy. To gain a deeper understanding of the factors influencing material memory performance, we have chosen a composite PLA/WF, which is polylactic acid (PLA) with 20 wt% wood flour (WF) for this purpose, leveraging its high tensile modulus at 0.966 GPa, low cost, and sustainability. Printed shapes with this material can maintain a recovery ratio over 90% after 3 cycles. While traditional composites fillers (e.g. glass or carbon fiber) are added to enhance mechanical and thermal properties, the addition of bio-based fillers like WF accomplish similar goals without compromising sustainability. We conducted multiple experiments to demonstrate how environmental conditions (i.e. temperature) maximize the material’s SME. Although still at an early stage, this study provides initial insights into bridging the gap between the small-scale nature of shape memory polymers (SMPs) and their potential for large-scale additive manufacturing, addressing a critical need for efficient and sustainable construction. In the long term, we hope our study contributes to the design vision of utilizing SMPs for transportation, assembly, and deployment of complex structures, providing a new pathway for sustainable construction and transportation of large-scale structures to hard-to-access locations such as disaster-affected areas and remote deserts, etc.

4D printing↗

DOE OSTI2026

Dissecting the contributions to non-photochemical quenching in a land plant under fluctuating light

Photosynthetic organisms have evolved multiple non-photochemical quenching (NPQ) processes, providing photoprotection by safely dissipating excess excitation energy. These processes involve various molecular players functioning on overlapping timescales from seconds to days, making it challenging to isolate and quantify their individual kinetics. In this study, we perform whole-leaf chlorophyll fluorescence lifetime and xanthophyll concentration measurements on wild-type and various newly characterized NPQ mutants of Nicotiana benthamiana, a vascular land plant. Based on these measurements, we construct a fluorescence lifetime-based quantitative kinetic model that disentangles individual photoprotection components and, when integrated additively, accurately predicts wild-type and mutant NPQ behaviors under various light-dark regimes. Additionally, the model quantifies the per-molecule quenching effectiveness of various xanthophylls and the contributions of six quenching components (qE V , qE A , qE Z , qE L , qZ, and qI) across different genotypes. It also suggests improved overall quenching efficiency at specific VDE:ZEP:PsbS overexpression stoichiometries, aligning with previous studies and supporting translational efforts to optimize photoprotection and enhance crop yields under dynamic light environments.

Lam, Lam [University of California, Berkeley, CA (↗

DOE OSTI2025

Skyrmion lattice manipulation with electric currents and thermal gradients in MnSi

The skyrmion lattice (SkL) in MnSi was studied using small-angle neutron scattering and under the influence of a radial electric current in a Corbino geometry. In response to the applied current, the SkL undergoes an angular reorientation with respect to the MnSi crystal lattice. The reorientation is nonmonotonic with increasing current, with the SkL rotating first in one direction and then the other. The SkL reorientation was studied at different sample locations and found to depend on the local current density as inferred from a finite-element analysis. Here, the nonmonotonic response indicates the presence of two competing effects on the SkL, most likely due to the presence of both radial electric and thermal currents. Such a scenario is supported by micromagnetic simulations, which show how these effects can act constructively or destructively to drive the SkL rotation, depending on the direction of the electric current. In addition, the simulations also suggest how the direction of the skyrmion flow may affect the SkL orientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Innovative Advanced Hydrogen Mobile Fueler (Final Technical Report)

The US Department of Energy (DOE) funded a project to design, develop, deploy and analyze the economic viability of an innovative Advanced Hydrogen Mobile Fueler (AHMF). As part of the design activity the project team defined specifications based upon vehicle requirements and compliance with specific fueling performance criteria. The AHMF was originally designed to fuel 10-20 fuel cell vehicles (FCV) per day, consistent with the requirements of the H70 fueling category. The AHMF is able to operate without remote power connections, is modular for easy transport and deployment, and can provide expanded daily capacity and multi-day operations using delivered gaseous hydrogen. Toward the end of the project, due to request from the hydrogen industry and some necessary modifications of the AHMF, the system is now modified to fuel heavy duty vehicles. The project was conducted over two primary phases, each including several key tasks, subtasks, and project milestones. Phase 1 involved the design, development, and construction of the AHMF, moving from a conceptual design through to completion of assembly and testing. In addition to reviewing several different approaches, the team chose to take a conventional station design and modify it for mobile fueling. There were several innovative components included in the design. The high pressure storage was the first to achieve a US Department of Energy (DOE) Special Permit (SP 20391) to transport high pressure hydrogen (95 MPa) in a composite cylinder. The second novel system was a liquid nitrogen (LIN) cooling system with a compact heat exchanger. Without this change, the cooling system would not be able to fit into the AHMF. Phase 2 demonstrated the AHMF by fueling fuel cell buses at a fleet in Pomona, CA. The site was chosen because a temporary fueling solution was required while a fixed station was being installed. The existing permits for the fixed station and non-public access also was a determining factor. Over two months, the buses were fueled 320 times with over 5000 kg of hydrogen from tube trailers. Existing shore power was used, and the average electrical efficiency was 0.13 kWh/kg. The average liquid nitrogen (LIN) consumption was 90.68 scf/kg. The fueling and consumption data was provided to the National Renewable Energy Laboratory (NREL) for analysis. An economic analysis was performed and will be provided in a separate report. The project was successful, but not without challenges and lessons learned. The DOT special permit led the way for the use of high pressure, composite cylinders and is being by multiple other systems and applications. The pandemic along with time for the DOT special permit approval delayed the project for years. The team also believes that hydrogen mobile fueling has a use for the industry, especially during this upcoming phase of expansion. However, it does have its limitations due to high cost to build and operate, and the same permitting challenges as a fixed station. A fully capable system at the speeds and pressures of the AHMF may not be necessary for most applications and would help reduce the cost and increase storage capacity. The on-board generator can be easily replaced with shore power or the wide range of power generation solutions in the marketplace. One of the major results of the project was the development of new code language in National Fire Protection Agency (NFPA) 2 and the International Fire Code (IFC) for on-demand mobile fueling. This will provide guidance for Authorities Having Jurisdiction (AHJ) and user on how to permit temporary fueling sites across the nation.

08 HYDROGEN↗

DOE OSTI2026

A Permanently Porous Chalcogen-Bonded Organic Framework

The nature of connectivity between constituent atomic or molecular building blocks is fundamental in shaping the properties and functionality of materials. The extrapolation of emergent interatomic interactions to enable functional materials has driven transformative technological advancements. However, the bonding interactions used in material design have been largely static since the emergence of dynamic covalent chemistry ~30 years ago. Here we demonstrate that non-covalent chalcogen bonding (Ch-bonding) is a distinct mode of interatomic connectivity for constructing functional materials by design. This is established by leveraging self-complementary assembly of 1,2,5-telluradiazole moieties to construct a honeycomb-type permanently porous Ch-bonded organic framework, assembled and stabilized solely through non-covalent Te...N contacts. Empirical and computational studies of electronic structure, structural healing and lattice dynamics highlight the pi-type electronic communication, controlled assembly and modulated lattice dynamics in Trip3Tez-I arising directly from the unique nature of the Te...N Ch-bonding that holds substantial implications for next generation crystalline semiconductors. In addition to introducing a distinct class of permanently porous frameworks, this work establishes Ch-bonding as a programmable molecular tool for constructing functional materials with distinct properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Exploring Microphase Separation in Semi-Fluorinated Diblock Copolymers: A Combined Experimental and Modeling Investigation

We report the combined experimental and theoretical study of the bulk self-assembly behavior of polystyrene-blockpoly( 2,3,4,5,6-pentafluorostyrene) diblock copolymers. These block copolymers were designed to create highly antagonistic blocks (with a high Flory−Huggins interaction parameter, χ) with minimum disruption to the molecular construct (i.e., only replacing five hydrogen atoms with five fluorine atoms). A large library of diblock copolymers (41 samples) was synthesized by reversible addition− fragmentation chain transfer (RAFT) polymerization to map out a major portion of the phase space. All block copolymers exhibited narrow molecular weight distributions with dispersity (D) values between 1.07 and 1.32, and subsequent thermal annealing revealed phase separation into well-defined nanoscale morphologies depending on their molecular composition, as determined from small-angle X-ray scattering and transmission electron microscopy analyses, with an experimental phase diagram being constructed. The χ value at 25 °C for this block copolymer was estimated to be 0.2 using strong segregation theory, based on trends in phase-separated domain spacing and interfacial width. When applying theoretical approaches, the majority of the domain spacing data trends were captured by a coil−coil diblock copolymer model; however, a better fit to the data for samples with shorter fluorinated blocks was obtained with a rod−coil model, indicating that the chains in these fluorinated blocks likely have a higher inherent stiffness and were thus rod-like. This observation demonstrates that, due to the very high value of χ, a transition from coil−coil to rod−coil behavior can be obtained purely by reducing the length of the stiffer of the two blocks and without varying temperature or the chemical composition of the polymers. Here, this work showcases the presence of strong microphase separation within AB diblock copolymers despite the relatively similar chemical composition of the constituent “A” and “B” units, with a clear transition from rod−coil to coil−coil segregation behavior.

RAFT polymerization↗

DOE OSTI2025

Assessing electrification readiness in U.S. single-family homes based on a nationwide survey of electrical panel capacities

Electrification of residential buildings is a key strategy for increasing the use of renewable energy sources. Central to this transition is understanding the capacity of existing electrical infrastructure—specifically electrical panels—to safely and effectively manage increased electricity demands from electrification technologies. However, comprehensive nationwide data on electrical panel capacities in U.S. single-family homes is currently lacking. To address this gap, we conducted a nationwide survey of single-family homes, collecting detailed data on electrical panel capacities, breaker slot availability, major electric and gas appliances, electrical panel models, and home characteristics such as construction year and floor area. Photographic documentation was used to verify electrical panel data and appliance information. Results show that approximately 60% of surveyed homes have electrical panels rated at ≥200 amperes (A), indicating that a significant portion of the existing housing stock can accommodate additional electric loads. However, 31% of homes possess panels rated at ≤100 A, potentially restricting their ability to adopt new electric appliances without significant upgrades. Panel capacities positively correlate with both home size and construction year, with newer and larger homes generally better suited for electrification. Homes with higher-capacity panels tend to have fewer gas appliances, reflecting a gradual shift toward electric technologies. Conversely, homes with lower-capacity panels frequently rely on multiple gas appliances, highlighting substantial electrification challenges. Additionally, approximately 3% of surveyed homes had potentially hazardous electrical panel models, emphasizing important safety considerations in the residential electrification process. Our findings underscore the need for targeted policies, financial incentives, and infrastructure investments designed specifically to address infrastructural and safety barriers, particularly in older and smaller homes, to support equitable and efficient electrification across the U.S. residential sector.

Gul, Sadia↗

DOE OSTI2025

Pressure-Induced Phase Transitions in Bilayer La 3 Ni 2 O 7

La 3 Ni 2 O 7 differs from expectations in part because at ambient pressure, it exists in two polymorphs: an unconventional crystal structure with alternating layers of single- and triple-layered nickel−oxygen octahedra (i.e., La 2 NiO 4 plus La 4 Ni 3 O 10 , with the so-called 1313 crystal structure) and a classical double-layer Ruddlesden−Popper phase (i.e., La 3 Ni 2 O 7 , with the so-called 2222 crystal structure, which dominates at high pressure). In this study, we report the pressure-dependent structural and electrical resistive properties of single crystals of the classical double-layered La 3 Ni 2 O 7 , grown at slightly elevated pressure using the floating-zone method. Structural characterization under pressures up to 15.4 GPa reveals a gradual transition from orthorhombic to tetragonal symmetry that is completed at 12−14 GPa. Additionally, we present pressure and field-dependent electrical resistance measurements up to 27.4 GPa, from which we construct a phase diagram. Although a resistive transition at 80 K is observed at high pressures, the resistive hallmarks of superconductivity are not.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Enhanced Resistance Pines for Improved Renewable Biofuel and Chemical Production (Technical Report)

We completed phenotyping constitutive and inducible oleoresin flow across two seasons, constitutive resin canal number and density and wood terpene content in our ADEPT2 and CCLONES populations. We completed genetic association between 19 oleoresin phenotypes and a total of 523,192 SNP markers from ADEPT2 and 13,883 SNP markers in CCLONES using four mixed linear models. A total of 293 significant SNPs (FDR = 0.20) were identified. We used the MENTOR tool to mine mechanistic connections from a multiplex network constructed from poplar multi-omic data to construct a conceptual model for a subset of these significant SNPs. Our model contains 6 transcriptional regulators in addition to 3 monoterpene synthases. To generate more lines of evidence for these significant SNPs, we completed a time course RNAseq experiment after inducing vascular zone cells to differentiate into new resin canals with a methyl jasmonate treatment, a single nuclei RNAseq that identified differentiating resin canal epithelial cells and are completing analysis for a QTL study in a hybrid pine population. The time course identified 4634 significantly down and 1890 significantly up regulated transcripts after treatment with methyl jasmonate, an inducer of new resin canal formation in the vascular cambial meristem. To analyze this large set of differentially regulated genes, we created a predictive expression network and analyzed it with random walk restart using 6 seed genes coding for transcription factors regulating xylem differentiation in poplar. Of the top ranked 200 transcripts, 119 transcripts were significant differentially expressed supporting these transcripts as potential candidates regulating resin canal formation. Analysis of single nuclei sequencing of shoot tips that contain differentiating resin canals, identified 10 clusters. One cluster was highly enriched in transcripts coding for 9 of the enzymes in the MEP pathway 3 prenyl synthetases, and 3 monoterpene synthases strongly suggesting that this cluster represents resin canal epithelial cells. We are mining the additional transcripts to create a trajectory analysis. In summary, we have identified > 10 novel genes that are strongly supported candidates for further analysis in breeding lines and for genetic engineering over- and under- expressing lines to increase wood terpene content to improve resistance to insect and fungal pathogens while simultaneously increasing terpene supplies for renewable chemicals and biofuels.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Image-based modeling of coupled electro-chemo-mechanical behavior of Li-ion battery cathode using an interface-modified reproducing kernel particle method

Abstract An interface-modified reproducing kernel particle method (IM-RKPM) is introduced in this work to allow for a direct model construction from image pixels of heterogeneous polycrystalline Li-ion battery microstructures. The interface-modified reproducing kernel (IM-RK) approximation is constructed through scaling of a kernel function by a regularized distance function in conjunction with strategic placement of interface node locations. This leads to RK shape functions with either weak or strong discontinuities across material interfaces, suitable for modeling various interface mechanics. With the placement of a triple junction node and distance-based scaling of kernel functions, the resulting IM-RK shape function also possesses proper discontinuities at the triple junctions. This IM-RK approximation effectively remedies the well-known Gibb’s oscillation in the smooth approximation of discontinuities. Different from the conventional meshfree approaches for interface discontinuities, this IM-RK approach is done without additional degrees of freedom associated with the enrichment functions, and it is formulated with the standard procedures in the RK shape function construction. This work focuses on identifying the accuracy and convergence properties of IM-RKPM for modeling the coupled electro-chemo-mechanical system. A linear patch test is formulated and numerically tested for the electro-chemo-mechanical coupled problem with a Butler–Volmer boundary condition representing the physical conditions in Li-ion battery microstructures. This is followed by verification of the optimal rates of convergence of IM-RKPM for solving the coupled problem with higher order solutions. The image-based modeling of Li-ion battery microstructures in the numerical examples demonstrates the applicability of the proposed method to realistic Li-ion battery materials modeling.

25 ENERGY STORAGE↗

DOE OSTI2024

The protein structurome of Orthornavirae and its dark matter

Metatranscriptomics is uncovering more and more diverse families of viruses with RNA genomes comprising the viral kingdom Orthornavirae in the realm Riboviria. Thorough protein annotation and comparison are essential to get insights into the functions of viral proteins and virus evolution. In addition to sequence- and hmm profile-based methods, protein structure comparison adds a powerful tool to uncover protein functions and relationships. We constructed an Orthornavirae “structurome” consisting of already annotated as well as unannotated (“dark matter”) proteins and domains encoded in viral genomes. We used protein structure modeling and similarity searches to illuminate the remaining dark matter in hundreds of thousands of orthornavirus genomes. The vast majority of the dark matter domains showed either “generic” folds, such as single α-helices, or no high confidence structure predictions. Nevertheless, a variety of lineage-specific globular domains that were new either to orthornaviruses in general or to particular virus families were identified within the proteomic dark matter of orthornaviruses, including several predicted nucleic acid-binding domains and nucleases. In addition, we identified a case of exaptation of a cellular nucleoside monophosphate kinase as an RNA-binding protein in several virus families. Notwithstanding the continuing discovery of numerous orthornaviruses, it appears that all the protein domains conserved in large groups of viruses have already been identified. The rest of the viral proteome seems to be dominated by poorly structured domains including intrinsically disordered ones that likely mediate specific virus-host interactions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Designing resilient IoT and Edge Computing with federated tinyML

The rapid growth of the Internet of Things (IoT) and Edge Computing (EC) has brought significant conveniences to modern society but has also greatly expanded the cyber attack surfaces, particularly as these technologies are being increasingly integrated into critical systems such as power grids, healthcare, and smart homes. Here, to improve IoT/EC’s cybersecurity posture, we leveraged Artificial Intelligence (AI) and Machine Learning (ML) by employing tinyML to monitor voluminous IoT data for cyber threats while addressing devices’ resource constraints, and utilizing Federated Learning (FL) to share local detection knowledge across the system while preserving privacy. Building on our three-layer architecture combining tinyML and FL to enhance autonomous cyber attack detection, this paper demonstrated that the architecture improves detection accuracy, reduces resource consumption, and enables lightweight, secure IoT device monitoring. These results were validated using the public N-BaIoT dataset as well as real IoT network traffic data collected under multiple attack scenarios from our testbeds. Additionally, we introduced an enhanced FL methodology with a novel preprocessing stage, including federated feature selection and global preprocessor construction, to address IoT/EC data heterogeneity. We developed a physical IoT testbed for attack simulations and data collection, implemented a tinyML-powered detector for realistic model validation, and also built a virtual testbed for scalable evaluations of FL models across diverse network environments.

Cognitive cyber↗

DOE OSTI2024

Droplet bioprinting of acellular and cell-laden structures at high-resolutions

Advances in digital light projection(DLP) based (bio) printers have made printing of intricate structures at high resolution possible using a wide range of photosensitive bioinks. A typical setup of a DLP bioprinter includes a vat or reservoir filled with liquid bioink, which presents challenges in terms of cost associated with bioink synthesis, high waste, and gravity-induced cell settling, contaminations, or variation in bioink viscosity during the printing process. Here, we report a vat-free, low-volume, waste-free droplet bioprinting method capable of rapidly printing 3D soft structures at high resolution using model bioinks and model cells. A multiphase many-body dissipative particle dynamics model was developed to simulate the dynamic process of droplet-based DLP printing and elucidate the roles of surface wettability and bioink viscosity. Process variables such as light intensity, photo-initiator concentration, and bioink formulations were optimized to print 3D soft structures (∼0.4–3 kPa) with a typical layer thickness of 50 µm, an XY resolution of 38 ± 1.5 μm and Z resolution of 237 ± 5.4 µm. To demonstrate its versatility, droplet bioprinting was used to print a range of acellular 3D structures such as a lattice cube, a Mayan pyramid, a heart-shaped structure, and a microfluidic chip with endothelialized channels. Droplet bioprinting, performed using model C3H/10T1/2 cells, exhibited high viability (90%) and cell spreading. Additionally, microfluidic devices with internal channel networks lined with endothelial cells showed robust monolayer formation while osteoblast-laden constructs showed mineral deposition upon osteogenic induction. Overall, droplet bioprinting could be a low-cost, no-waste, easy-to-use, method to make customized bioprinted constructs for a range of biomedical applications.

DLP↗

DOE OSTI2026

Intertwined charge, spin, and orbital degrees of freedom under electronic correlations in the one-dimensional Fe 3+ chalcogenide chain

Motivated by recent developments in the study of quasi-one-dimensional iron systems with Fe 2+ , we comprehensively study an Fe 3+ chalcogenide chain system. Based on first-principles calculations, the Fe 3+ chain has a similar electronic structure to that discussed before for the Fe 2+ chain, because of the similar Fe⁢𝑋 4 (𝑋 = S or Se) tetrahedron-chain geometry. Furthermore, a three-orbital electronic Hubbard model for this chain was constructed using the density matrix renormalization group method. A robust antiferromagnetic coupling was unveiled in the chain direction. In addition, in the intermediate electronic correlation 𝑈/𝑊 region, we found an interesting orbital-selective Mott phase with the coexistence of localized and itinerant electrons (𝑈 is the on-site Hubbard repulsion, while 𝑊 is the electronic bandwidth) based on the orbital-selective behavior observed in the charge fluctuations. Furthermore, we do not observe any obvious pairing tendency in the Fe 3+ chain in the electronic-correlation 𝑈/𝑊 region, where superconducting pairing tendencies were reported before in iron ladders. This suggests that superconductivity is unlikely to emerge in the Fe 3+ systems. Finally, our results clearly establish the similarities and differences between Fe 2+ and Fe 3+ iron chains, as well as iron ladders.

density matrix renormalization group↗

DOE OSTI2024

Deep Learning for Fish Identification from Sonar Data (CRADA 481 Final Report)

In eastern regions of the United States, the American eel is a species of management and regulatory concern because of significant population declines, despite the species’ previous abundance in all tributaries of rivers flowing into the Atlantic Ocean. The American eel is also a candidate for listing under the U.S. Endangered Species Act. While hydropower construction and operation are only one of several factors contributing to this population decline, such a listing could impose additional regulatory challenges for a large number of hydropower projects. In this CRADA project, we improved technologies for identifying migrating eels with the goal of reducing the cost and time required for future American eel hydropower impact assessment and mitigation studies, while maintaining accuracy. We built on results from a previous FOA project (FOA# DE-FOA-0001662), led by the Electric Power Research Institute (EPRI), which developed a highly accurate, deep-learning method for identifying migrating eels from imaging sonar data. The current study aimed to further optimize this deep-learning model, originally designed for image classification, and to develop an object detection software capable of identifying fish from sonar videos in real time, enabling the detection of events like fish migrations and specific species, such as the American eel, at hydropower dams. The data conversion algorithms were packaged as software with a graphical user interface, and the software is evaluated by external collaborators. We focused on the American eel in this project and explored the transferability of the developed deep learning models to the sea lamprey, given the similar body shape and swimming behavior between the two species.

13 HYDRO ENERGY↗

DOE OSTI2024

Significantly Promoting the Thermal Conductivity and Machinability of Negative Thermal Expansion Alloy via In Situ Precipitation of Copper Networks

Rapid advancements in electronic devices yield an urgent demand for high-performance electronic packaging materials with high thermal conductivity, low thermal expansion, and great mechanical properties. However, it is a great challenge for current design philosophies to fulfill all the requirements simultaneously. Here, an effective strategy is proposed for significantly promoting the thermal conductivity and machinability of negative thermal expansion alloy (Zr,Nb)Fe 2 through eutectic precipitation of copper networks. The eutectic dual-phase alloy exhibits an isotropic chips-matched thermal expansion coefficient and a thermal conductivity enhancement exceeding 200% compared with (Zr,Nb)Fe 2 , along with an ultimate compressive strength of 550 MPa. The addition of copper reorganizes the composition of (Zr,Nb)Fe 2 , which smooths the magnetic transition and shifts it toward higher temperature, resulting in linear low thermal expansion in a wide temperature range. The highly fine eutectic copper lamellae construct high thermal conductivity networks within (Zr,Nb)Fe 2 , serving as highways for heat transfer electrons and phonons. The in situ forming of eutectic copper lamellae also facilitates the mechanical properties by enhancing interfacial bonding and bearing additional stress after yielding of (Zr,Nb)Fe 2 . This work provides a novel strategy for promoting thermal conductivity and mechanical properties of negative thermal expansion alloys via eutectic precipitation of copper networks.

36 MATERIALS SCIENCE↗