Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Trailblazing Kr/Xe Separation: The Birth of the First Kr-Selective Material

Efficient separation of Kr from Kr/Xe mixtures is pivotal in nuclear waste management and dark matter research. Thus far, scientists have encountered a formidable challenge: the absence of a material with the ability to selectively adsorb Kr over Xe at room temperature. This study presents a groundbreaking transformation of the renowned metal–organic framework (MOF) CuBTC, previously acknowledged for its Xe adsorption affinity, into an unparalleled Kr-selective adsorbent. This achievement stems from an innovative densification approach involving systematic compression of the MOF, where the crystal size, interparticle interaction, defects, and evacuation conditions are synergistically modulated. The resultant densified CuBTC phase exhibits exceptional mechanical resilience, radiation tolerance, and notably an unprecedented selectivity for Kr over Xe at room temperature. Simulation and experimental kinetic diffusion studies confirm reduced gas diffusion in the densified MOF, attributed to its small pore window and minimal interparticle voids. The lighter Kr element demonstrates facile surface passage and higher diffusivity within the material, while the heavier Xe encounters increased difficulty entering the material and lower diffusivity. This Kr-selective MOF not only represents a significant breakthrough in Kr separation but also demonstrates remarkable processability and scalability to kilogram levels. Furthermore, the findings presented herein underscore the transformative potential of engineered MOFs in addressing complex challenges, heralding a new era of Kr separation technologies.

36 MATERIALS SCIENCE↗

Dopamine-Mediated Polymer Coating Facilitates Area-Selective Atomic Layer Deposition

Area-selective atomic layer deposition (ALD) has the potential to significantly improve current fabrication approaches by introducing a bottom-up process in which robust and conformal thin films are selectively deposited onto patterned substrates. This bottom-up approach requires selective areas of the substrates to be masked to inhibit deposition. Spontaneous self-assembly and organization of a mask, incorporating adhesion and other functions, are particularly attractive for this role as they do not require a separate patterning step. In this work, we make use of the pH/light tunability of catechol adhesion to develop a catechol-functionalized polymer that exhibits tunable adhesion strengths on different materials based on their specific chemistry. Tunable selective deposition was shown between metal/metal oxide substrates by controlling the local pH. Moreover, by controlling the adhesion strength through UV light, the deposition of hafnium oxide (HfO 2 ) during ALD was successfully inhibited.

36 MATERIALS SCIENCE↗

Highly Selective Methane to Methanol Conversion on Inverse SnO 2 /Cu 2 O/Cu(111) Catalysts: Unique Properties of SnO 2 Nanostructures and the Inhibition of the Direct Oxidative Combustion of Methane

Direct methane to methanol (CH 4 → CH 3 OH) conversion in heterogeneous catalysis has been a long-standing challenge due to the difficulties in equalizing the activation of methane and protection of the methanol product at the same reaction conditions. Here, we report an inverse catalyst, consisting of small structures of SnO 2 (0.5-1 nm in size) dispersed on Cu 2 O/Cu(111), for highly selective CH 3 OH production from CH 4 . This system was investigated by combining theoretical [density functional theory calculations (DFT), kinetic Monte Carlo simulations (KMC)] and experimental methods [scanning tunneling microscopy (STM), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS)]. The DFT and AP-XPS studies showed that on SnO 2 /Cu 2 O/Cu(111) the conversion of CH 4 by oxygen (O 2 ) preferred complete combustion to carbon dioxide (CO 2 ). The addition of water (H 2 O) enhanced the production of CH 3 OH to nearly 100% selectivity in KMC simulations. This trend was consistent with results of AP-XPS. The presence of water in the reaction environment rendered an extremely high amount of methoxy species (*CH 3 O), a precursor for CH 3 OH production. Further, the high CH 3 OH selectivity of SnO 2 /Cu 2 O/Cu(111) reflected the unique atomic and electronic structure of the supported SnO 2 nanoparticles. As a result, the O 2 adsorption and dissociation, and thus the full combustion of CH 4 to CO 2 , was completely suppressed; while the H 2 O dissociative adsorption was still feasible, providing active hydroxyl species for a truly selective CH 4 to CH 3 OH conversion.

03 NATURAL GAS↗

Supervised learning-based tagSNP selection for genome-wide disease classifications

Comprehensive evaluation of common genetic variations through association of single nucleotide polymorphisms (SNPs) with complex human diseases on the genome-wide scale is an active area in human genome research. One of the fundamental questions in a SNP-disease association study is to find an optimal subset of SNPs with predicting power for disease status. To find that subset while reducing study burden in terms of time and costs, one can potentially reconcile information redundancy from associations between SNP markers. We have developed a feature selection method named Supervised Recursive Feature Addition (SRFA). This method combines supervised learning and statistical measures for the chosen candidate features/SNPs to reconcile the redundancy information and, in doing so, improve the classification performance in association studies. Additionally, we have proposed a Support Vector based Recursive Feature Addition (SVRFA) scheme in SNP-disease association analysis. We have proposed using SRFA with different statistical learning classifiers and SVRFA for both SNP selection and disease classification and then applying them to two complex disease data sets. In general, our approaches outperform the well-known feature selection method of Support Vector Machine Recursive Feature Elimination and logic regression-based SNP selection for disease classification in genetic association studies. Our study further indicates that both genetic and environmental variables should be taken into account when doing disease predictions and classifications for the most complex human diseases that have gene-environment interactions.

59 BASIC BIOLOGICAL SCIENCES↗

Self‐Assembled Membranes for High Ion Selectivity and Proton Blocking in Electrochemical Applications

Anion-exchange membranes (AEMs) with high anion/cation selectivity and exceptional proton-blocking ability are critical for applications such as bipolar membrane electrodialysis and electrochemical acid recovery. However, existing AEMs are constrained by a trade-off between ionic conductivity and selectivity, largely due to the intrinsic coupling between charge density and water content, and they suffer from excessive proton leakage facilitated by the Grotthuss hopping mechanism. In this work, poly(vinylimidazolium) membranes functionalized with long alkyl side chains that self-assemble into well-defined microphase-separated morphologies stabilized by hydrophobic and electrostatic interactions are reported. These unique structures localize the charge density along the polymer backbone to promote fast and selective ion transport. As a result, these membranes exhibit ionic conductivities and counter-ion diffusivities surpassing those of conventional homogeneous membranes, along with unprecedented counter-ion/co-ion selectivity and proton-blocking ability. These results establish a new design paradigm for high-performance, phase separated charged polymer membranes that overcome the limitations of homogeneous membranes, with broad implications for advanced electrochemical technologies.

36 MATERIALS SCIENCE↗

Does Selectivity of Molecular Catalysts Change with Time? Polymerization Imaged by Single-Molecule Spectroscopy

The chemoselectivity of molecular catalysts underpins much of modern synthetic organic chemistry. However, little is known about the selectivity of individual catalysts because this single-catalyst-level behavior is hidden by the bulk catalytic behavior. In this work, for the first time, the selectivity of individual molecular catalysts for two different reactions is imaged in real time at the single-catalyst level. This imaging is achieved through fluorescence microscopy paired with spectral probes that produce a snapshot of the instantaneous chemoselectivity of a single catalyst for either a single-chain-elongation or a single-chain-termination event during ruthenium-catalyzed polymerization. Superresolution imaging of multiple selectivity events, each at a different single-molecular ruthenium catalyst, indicates that catalyst selectivity may be unexpectedly spatially and time-variable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Nickel-Doped Ceria Catalysts for Selective Acetylene Hydrogenation

Metallic nickel is known to be an active, but not a selective hydrogenation catalyst for conversion of alkynes to alkenes. On the other hand, nickel oxide is not active. Recently, we have demonstrated that nickel doped into ceria provides an inexpensive catalyst for selective hydrogenation of acetylene in the presence of ethylene. Here, we evaluate various synthesis methods to achieve optimal selective hydrogenation performance. We examined incipient wetness impregnation, coprecipitation, solution combustion, and sol-gel synthesis to study how the method of preparation affects catalytic structure and behavior. Sol-gel synthesis, coprecipitation, and solution combustion synthesis methods favor nickel incorporation into the ceria lattice, while incipient wetness impregnation creates segregated nickel species on the ceria surface. For hydrogenation of acetylene, these nickel surface species lead to poor ethylene selectivity due to ethane and oligomer formation. However, when nickel is incorporated into the ceria lattice, ethane formation is prevented even while achieving 100 % conversion of acetylene. Coke formation is also significantly reduced on these catalysts compared to conventional nanoparticle counterparts. Finally, we conclude that sol-gel synthesis provides the optimal method for creating a uniform dopant distribution within the high surface area ceria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulation of the Effective Metal-Support Interactions for the Selectivity of Ceria Supported Noble Metal Nanoclusters in Atmospheric CO 2 Hydrogenation

Ever-increasing attention is given to the sustainable utilization of CO 2 in the atmosphere out of environmental and economic considerations. The deep-going clarification of the effective and ineffective metal-support interactions (MSI) in the supported catalysts for the catalytic performance of CO 2 hydrogenation is particularly needed to design highly active nanocatalysts. How to tune the MSI to be effective for the selectivity of goal hydrogenation products is a significant but rather challenging subject. In this work, we demonstrate that the selectivity in CO 2 hydrogenation can be regulated from preferential CH 4 production to preferential CO production by varying the nature of the electronic MSI for ceria supported noble metal nanoclusters, and the effective MSI play a pivotal role for the catalytic systems with opposite hydrogenation selectivity. The modulation of the effective MSI for the selectivity in CO 2 hydrogenation sheds new light on the comprehensive understanding of the MSI and interfacial effects in terms of tailoring and controlling the performance of supported heterogeneous catalysts.

36 MATERIALS SCIENCE↗

Switching CO 2 Electroreduction Selectivity Between C 1 and C 2 Hydrocarbons on Cu Gas-Diffusion Electrodes

We report that regulating the selectivity toward a target hydrocarbon product is still the focus of CO 2 electroreduction. Here, we discover that the original surface Cu species in Cu gas-diffusion electrodes plays a more important role than the surface roughness, local pH, and facet in governing the selectivity toward C 1 or C 2 hydrocarbons. The selectivity toward C 2 H 4 progressively increases, while CH 4 decreases steadily upon lowering the Cu oxidation species fraction. At a relatively low electrodeposition voltage of 1.5 V, the Cu gas-diffusion electrode with the highest Cu δ+ /Cu 0 ratio favors the pathways of hydrogenation to form CH 4 with maximum Faradaic efficiency of 65.4% and partial current density of 228 mA cm -2 at -0.83 V vs RHE. At 2.0 V, the Cu gas-diffusion electrode with the lowest Cu δ+ /Cu 0 ratio prefers C–C coupling to form C 2+ products with Faradaic efficiency topping 80.1% at -0.75 V vs RHE, where the Faradaic efficiency of C 2 H 4 accounts for 46.4% and the partial current density of C 2 H 4 achieves 279 mA cm -2 . This work demonstrates that the selectivity from CH 4 to C 2 H 4 is switchable by tuning surface Cu species composition of Cu gas-diffusion electrodes.

36 MATERIALS SCIENCE↗

Engineered selective biotoxin‐binding hydrogels for toxin sequestration

The development of synthetic selective membranes that separate materials of similar sizes, charges, and/or polarities remains a difficult challenge, and looking towards biology provides inspiration for new designs. In this work, a series of cholera toxin binding peptides (CTBPs) are identified, spanning a range of binding inhibitions, and integrated into chemically cross-linked cholera toxin binding gels (CTBGs) via thiol-Michael polycondensation reactions. All gels demonstrate rheological profiles consistent with elastic solids. The CTBGs are probed via small-angle neutron scattering and exhibit a correlation length, ξ, smaller than most proteins (1.3–2.5 nm). Thus, an effective entropic mesh is formed to block non-targeted proteins. However, the CTBGs have a dynamic mesh size, Ξ, that is larger than cholera toxin (CT) to allow the transport of target proteins. The CTBGs with the highest binding inhibitions both show high selectivity and permeation of CT, rejecting all other tested proteins. In total, two new highly selective CTBGs are synthesized and validated for use in cholera toxin remediation. Together, this platform demonstrates the wide applicability of selectively-diffusive materials for difficult separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and reactivity of Pt–In intermetallic alloy nanoparticles: Highly selective catalysts for ethane dehydrogenation

The structure of silica supported Pt and Pt-In bimetallic catalysts with nominal In: Pt atomic ratios of 0.7 and 1.4 were here determined by in situ synchrotron XAS and XRD. It was seen that the addition of In led to the formation of two different intermetallic alloy phases. At an In: Pt ratio of 0.7 the Pt 3 In phase with a Cu 3 Au structure was formed. When the ratio was increased to 1.4 a shell of PtIn 2 having a CaF 2 structure formed around a core of Pt 3 In. The catalysts were tested for ethane dehydrogenation at 600° to determine the effect of alloying on ethylene selectivity and turnover rate (TOR). The monometallic Pt catalysts was 73% selective for ethylene and had an initial TOR of 0.7 s -1 . Both alloy catalysts were approximate to 100% selective for dehydrogenation and had higher initial TOR, 2.8 s -1 and 1.6 s -1 for In: Pt ratio of 0.7 and 1.4, respectively. The increase in selectivity is attributed to the elimination of large Pt ensembles resulting from geometric changes to the catalyst surface upon alloying. Electronic changes due to the formation of Pt-In bonds are thought to be responsible for the increases in TOR in the alloy catalysts.

36 MATERIALS SCIENCE↗

Effects of rigidity on the selectivity of protein kinase inhibitors

Established strategies for discovering selective kinase inhibitors are target-centric as they often target certain structural or reactive features in the target kinase. In the absence of such prominent features, there is a lack of general methods for discovering selective inhibitors. As such, here we describe a new strategy that exploits conformational flexibility of kinases for achieving selective kinase inhibition. Through ring closure, we designed and synthesized a panel of isoquinoline-containing compounds as rigidified analogs of an amidophenyl-containing parent compound. These analogs potently inhibit kinases including Abl and BRAF but have diminished inhibition against some other kinases compared to the parent compound. Sequence analysis reveals that many of the kinases that are potently inhibited by the isoquonoline-containing compounds contain a long insertion within their catalytic domains. A crystal structure of one rigid compound bound to BRAF confirmed its binding mode. Our findings highlight the potential of a novel strategy of rigidification for improving the selectivity of kinase inhibitors.

59 BASIC BIOLOGICAL SCIENCES↗

GCS site selection in saline Miocene formations in South Louisiana

One of the key requirements of a commercial scale geologic carbon sequestration (GCS) site selection process is identifying injection sites to safely inject and retain injected CO 2 over extended time scales. This requires thorough evaluation of site-specific surface and subsurface features. A site screening and selection framework was developed and used to identify potential sites in South Louisiana, incorporating surface data including site proximity to large CO 2 stationary sources, vicinity of large population centres and state lands, land usage, legacy oil and gas wells, and local/regional geologic trends. Regionally the Miocene sediments thicken and dip towards the south, reflecting a prograding deltaic environment during the Miocene which resulted in the deposition of thick packages of fine-grained sandstones suitable for CO 2 storage. The results of three example selected sites that are spatially separated with varying subsurface and surface features are presented in this study. The multiple stacked sand zones at these sites provide ample amount of pore volume for CO 2 storage with varying degree of stratigraphic/structural traps for long terms storage containment. Here, the screening framework presented in this study and the detailed evaluation of three specific sites in South Louisiana provides a process to screen and characterize sites for GCS projects and the suitability of these Miocene sediments for commercial scale CO 2 storage projects. It is envisioned that the analysis described in this paper will be beneficial for a large number of audiences involved in GCS work and aid in the site selection process.

58 GEOSCIENCES↗

Ethylene versus ethane: A DFT-based selectivity descriptor for efficient catalyst screening

The production of ethylene without its hydrogenation to ethane is a challenge for several catalytic processes. Here, in this study, we present a catalyst screening scheme, where the Gibbs free energy difference between the ethylene hydrogenation barrier and ethylene desorption energy is defined as a descriptor for ethylene selectivity. Using plane-wave, dispersion-corrected DFT calculations, we evaluated the descriptor values over the (111) facets of Pt, Pd, and Cu as well as a series of Pt- and Pd-based bimetallic alloys. Our predicted descriptor values indicate that the addition of a Group IB metal (Cu, Ag, or Au) to Pt or Pd improves ethylene selectivity. Ag induces the most significant improvement at 50% while Au has the strongest effect at 75% atomic composition. Pd-based alloys exhibit superior ethylene selectivity over their Pt-based counterparts. Our descriptor model offers an efficient method for the initial screening of catalysts with improved ethylene selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variant selection in laser powder bed fusion of non-spherical Ti-6Al-4V powder

The presence of α/α' on prior β/β grain boundaries directly impacts the final mechanical properties of the titanium alloys. The β/β grain boundary variant selection of titanium alloys has been assumed to be unlikely owing to the high cooling rates in laser powder bed fusion (L-PBF). However, we hypothesize that powder characteristics such as morphology (non-spherical) and particle size (50–120 µm) could affect the initial variant selection in L-PBF processed Ti-6Al-4V alloy by locally altering the cooling rates. Despite the high cooling rate found in L-PBF, the results showed the presence of β/β grain boundary α' lath growth inside two adjacent prior β grains. Electron backscatter diffraction micrographs confirmed the presence of β/β grain boundary variant selection, and synchrotron X-ray high-speed imaging observation revealed the role of the “shadowing effect” on the locally decreased cooling rate because of keyhole depth reduction and the consequent β/β grain boundary α' lath growth. The self-accommodation mechanism was the main variant selection driving force, and the most abundant α/α boundary variant was type 4 (63.26°//[ $\bar{10}$ 5 5 $\bar{3}$ ]). The dominance of Category II α lath clusters associated with the type 4 α/α boundary variant was validated using the phenomenological theory of martensite transformations and analytical calculations, from which the stress needed for the β→α' transformation was calculated.

36 MATERIALS SCIENCE↗

Maximizing selectivity: An analysis of isoporous membranes

Membranes are compelling candidates for many separation-based industrial processes. However, all synthetic membranes are subject to well-recognized permeability-selectivity trade-offs that hinder their use in advanced applications. Having uniform nanoscale pore size, isoporous nanofiltration and ultrafiltration membranes have attracted wide research interest. However, quantitative analysis of isoporous membrane performance is lacking - particularly at module and system-level scales. In this study, an analytical model is built to investigate how membrane pore-size distribution affects the solute separation efficiency (i.e., rejection and selectivity). The model accounts for convective hindrance as well as concentration polarization and explores effects on separation from the solute-to-pore-size ratio and percent recovery (i.e., fraction of feed flow that passes through the membrane). At the module level, our analysis suggests that a notably sharper rejection vs. solute size curve can be obtained as the pore-size distribution becomes narrower. Additionally, as the recovery increases, the rejection of a solute is maintained at a high level using isoporous membranes while the rejection drops rapidly for membranes that possess a disperse pore-size distribution. Furthermore, in the separation of mixed solutes, isoporous membranes achieve a large selectivity with a modest loss of permeability. Overall, this study elaborates the unique role that isoporous membranes play within the permeability-selectivity trade-off relations and identifies the most exciting opportunities for their future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extended Donnan-Manning theory for selective ion partition and transport in ion exchange membrane

The use of ion exchange membranes (IEMs) for electrochemical ion-ion separation leverages the selectivity of the IEMs toward like-charged species via valence difference and/or other ion membrane interactions. A mechanistic model that relates selectivity with membrane structural and chemical properties is lacking in the literature. Here, in this study, we extend the Manning’s counter-ion condensation model for describing ion partition and ion mobility inside IEMs to mixed salts scenarios. We evaluate the extended Donnan-Manning model against experimental data from literature and compare the performance the Donnan-Manning model to that of the ideal Donnan model and the Donnan-Affinity model. Our analysis shows that, despite its structural complexity, the Donnan-Manning model has less fitting parameters than the Donnan-Affinity model and generally outperforms the two other models in predicting counter-ion and co-ion partition. With the assumption of a higher mobility of condensed ions than that of uncondensed ions, the generalized Manning’s model can also predict counter-ion mobility selectivity for cation exchange membranes, but its performance for predicting mobility selectivity for anion exchange membranes is still unsatisfactory.

42 ENGINEERING↗

Automated integration gate selection for Gaussian mixture model pulse shape discrimination

Pulse shapes differ between neutron and gamma particles when measured with detector devices employing pulse shape discriminating (PSD) scintillators. Digitized waveforms can be used in detection systems to perform pulse shape discrimination for this application. Prior Gaussian Mixture Model (GMM) methods require access to the pulse full-waveform. Reducing the waveform to a smaller set of combined samples reduces computational cost while affecting PSD performance. In this work, we develop a method for selecting the best performing combination of integration gates, or contiguous summed segments of the digitized pulse for PSD. The method uses a discrimination score based on the GMM PSD approach. Furthermore, the final selection is performed using Bayesian Optimization. PSD detection results are compared with varying numbers of selected gates on time-of-flight (TOF) data. This method can be used to fully automate the selection of gates in an unsupervised (without ground truth labels) setting.

42 ENGINEERING↗