Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron microscope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Optical and electrical properties of ion beam textured Kapton and Teflon

An electron bombardment argon ion source was used to ion etch polyimide (Kapton) and fluorinated ethylene, FEP (Teflon). Samples of polyimide and FEP were exposed to (0.5-1.0) keV Ar ions at ion current densities of (1.0-1/8) mA/sq cm for various exposure times. Changes in the optical and electrical properties of the samples were used to characterize the exposure. Spectral reflectance and transmittance measurements were made between 0.33 and 2.16 micron m using an integrating sphere after each exposure. From these measurements, values of solar absorptance were obtained. Total emittance measurements were also recorded for some samples. Surface resistivity was used to determine changes in the electrical conductivity of the etched samples. A scanning electron microscope recorded surface structure after exposure. Spectral optical data, resistivity measurements, calculated absorptance and emittance measurements are presented along with photomicrographs of the surface structure for the various exposures to Ar ions.

Mirtich, M. J.↗
NASA NTRS1977

Inert gas thrusters

Inert gases, particularly argon and xenon, are of interest as possible alternatives to the usual electric thruster propellants of mercury and cesium. Hollow cathode data were obtained for a wide range of operating conditions. Some test conditions gave plasma coupling voltages at or below the sputtering threshold, hence should permit long operating lifetimes. All observations of hollow cathode operation were consistent with a single theory of operation, in which a significant amount of the total electron emission is from localized areas within the orifice. This mode of emission is also supported by scanning electron microscope photographs that indicate local temperatures at or near the melting temperature of the tungsten tip. Experimental hollow cathode performance was correlated for two orifice diameters, three inert gas propellants, and a range of flow rates for each propellant. The basic theory for the production of doubly ionized argon and xenon was completed. Experimental measurements of the doubly ionized fraction agree with theory within about plus or minus 20 percent. High voltage isolators were studied for the propellant feed line. The breakdown voltage per segment ranged from 300 to over 500 V with argon.

Kaufman, H. R.↗
NASA NTRS1978

Structural and Functional Organization of the Vestibular Apparatus in Rats Subjected to Weightlessness for 19.5 Days Aboard the Kosmos-782 Satellite

The vestibular apparatus was investigated in rats subjected to weightlessness for 19.5 days. The vestibular apparatus was removed and its sections were fixed in a glutaraldehyde solution for investigation by light and electron microscopes. Structural and functional charges were noted in the otolith portions of the ear, with the otolith particles clinging to the utricular receptor surface and with the peripheral arrangement of the nucleolus in the nuclei of the receptor cells. It is possible that increased edema of the vestibular tissue resulted in the destruction of some receptor cells and in changes in the form and structure of the otolith. In the horizontal crista, the capula was separated.

Vinnikov, Y. A.↗
NASA NTRS1978

High resolution masks for ion milling pores through substrates of biological interest

The feasibility was investigated of electrochemically oxidizing vapor deposited aluminum coatings to produce porous aluminum oxide coatings with submicron pore diameters and with straight channels normal to the substrate surface. Porous aluminum oxide coatings were produced from vapor deposited aluminum coatings on thin stainless steel (304), copper, Teflon (FEP) and Kapton substrates and also on pure aluminum substrates. Scanning electron microscope examination indicated that porous oxide coatings can be produced with straight channels, appropriate pore diameters and none or minimal intervening residual aluminum. The oxide coatings on the copper and Kapton substrates had the straightest channels and in general were superior to those fabricated on the other substrate materials. For oxide coatings fabricated at 600 V and 300 V, pore diameters were 0.4-0.6, and 0.3 micron with center-to-center spacing of 0.7-0.8, and 0.4 micron, respectively. Estimated direct labor and materials costs to prepare an oxide mask is anticipated to be about $4-$6 per square foot.

Donovan, S. S.↗
NASA NTRS1977

Effects of radiation upon the light-sensing elements of the retina as characterized by scanning electron microscopy

A model system using Necturus maculosus, the common mudpuppy, was established for evaluating effects of radiation upon the light-sensing elements of the retina. Accelerated heavy ions of helium and neon from the Berkeley Bevalac were used. A number of criteria were chosen to characterize radiation damage by observing morphological changes with the scanning electron microscope. The studies indicated retina sensitivity to high-LET (neon) particles at radiation levels below 10 rads (7 particles per visual element) whereas no significant effects were seen from fast helium ions below 50 rads.

Malachowski, M. J.↗
NASA NTRS1977

Shock-produced olivine glass - First observation

Transmission electron microscope (TEM) observations of an experimentally shock-deformed single crystal of natural peridot, /Mg(0.88)Fe(0.12)/2SiO4, recovered from peak pressures of about 56 billion pascals revealed the presence of amorphous zones located within crystalline regions with a high density of tangled dislocations. This is the first reported observation of olivine glass. The shocked sample exhibits a wide variation in the degree of shock deformation on a small scale, and the glass appears to be intimately associated with the highest density of dislocations. This study suggests that olivine glass may be formed as a result of shock at pressures above about 50 to 55 billion pascals and that further TEM observations of naturally shocked olivines may demonstrate the presence of glass.

Jeanloz, R.↗
NASA NTRS1977

Nondestructive determination of the depth of planar p-n junctions by scanning electron microscopy

A method was developed for measuring nondestructively the depth of planar p-n junctions in simple devices as well as in integrated-circuit structures with the electron-beam induced current (EBIC) by scanning parallel to the junction in a scanning electron microscope (SEM). The results were found to be in good agreement with those obtained by the commonly used destructive method of lapping at an angle to the junction and staining to reveal the junction.

Chi, J.-Y.↗
NASA NTRS1977

Wear studies on aircraft brake materials

An investigation of both worn surfaces of friction pads and steel rotors which are being applied in current aircraft brakes has been carried out by employing an X-ray diffraction technique. It consists of the analysis of chemical element distribution in the surface layers. The wear particles were also examined by using the scanning electron microscope. The initiation and growth of surface cracks and the oxidation were emphasized in this investigation. A wear model was proposed for the current aircraft brake materials. Essentially this model proposed that cracks are formed in the surface layer of the brake material due to the normal and frictional stresses. It is primarily surface temperature dependent.

Ho, T. L.↗
NASA NTRS1978

Oxide morphology and spalling model for NiAl

A scanning electron microscope equipped with an energy dispersive spectrographic unit was used to study in detail the Al2O3 oxide morphology and oxide-metal interface of a nickel-rich NiAl alloy (Ni-42 at% Al) with a view toward providing information relevant to spalling theories in the MCrAlY system. In addition, the kinetics of spalling was studied for critical evaluation of one of the step-process spall models and for collection of pertinent experimental data. Cyclic oxidation tests were run in 1-atm air at about 1100 C, and isothermal specimens were examined from 2 min to 200 hr of exposure. It is shown that oxide spalling occurs primarily at the oxide-metal interface in an intergranular mode, that crystallographic Kirkendall voids arise as a result of oxidation, and that the fractional area of spalled oxide varies widely in cyclic tests but increases with the square of oxide thickness for isothermal tests. A spall model is developed in the form of a summation series.

Smialek, J. L.↗
NASA NTRS1977

Fracture surface characteristics of off-axis composites

The fracture surface characteristics of off-axis high-modulus graphite-fiber/epoxy composite specimens were studied using a scanning electron microscope (SEM). The specimens were subjected to tensile loading at various angles (0-90 deg) to the fiber direction. SEM photomicrographs of the fractured surfaces revealed three different load angle regions with distinct fracture characteristics. Based on these revelations, criteria were established which can be used to characterize fracture surfaces with respect to a predominant 'single-stress' fracture mode.

Sinclair, J. H.↗
NASA NTRS1975

Surface morphology and chemistry of rusty particle 60002,108

Scanning electron microscope, energy dispersive X-ray, and microprobe analyses of the surface of rusty colored particle 60002,108 from deep core 60002 reveal the particle to be basically metallic Ni-Fe that probably grew in contact with silicate minerals, principally plagioclase and pyroxene, and was later partially oxidized and hydrated. A yellowish wrinkled and 'shatter cone' like granular material that is either iron oxide or oxyhydrate may have formed while the particle was in the lunar environment. Ruby-red mounds of lawrencite formed, and the reaction of lawrencite, metallic Ni-Fe, and water vapor resulted in aprons of iron oxyhydrate that surrounds these mounds and flows out over the preexisting yellowish granular substrate. The observations do not allow one to distinguish unequivocally between the initiation of hydration of the ruby-red lawrencite mounds in the lunar environment followed by reaction in the terrestrial and/or spacecraft environment or only reaction in the terrestrial and/or spacecraft environment. The relationship of the lawrencite-rich mounds to the yellowish granular substrate favors the first possibility.

Carter, J. L.↗
NASA NTRS1978

Studies of Brazilian meteorites. XIV - Mineralogy, petrology, and chemistry of the Conquista, Minas Gerais, chondrite

The Conquista chondrite is described and classified as an H4. The mineral composition is reported. H-group classification is based on described microscopic, electron microprobe, and bulk chemical studies. The evidence for petrologic type 4 classification includes the pronounced well-developed chondritic texture; the slight compositional variations in constituent phases; the high Ca contents of pyroxene and the presence of pigeonite; glassy to microcrystalline interstitial material rich in alkalis and SiO2; and twinned low-Ca clinopyroxene.

Keil, K.↗
NASA NTRS1978

A Schottky-barrier solar cell on sliced polycrystalline GaAs

Antireflecting-metal-oxide-semiconductor (AMOS) technology has been applied to sliced wafers of polycrystalline GaAs having grain sizes of about 100 microns. Simulated AM1 sunlight efficiencies up to 14% were obtained, and studies using the scanning electron microscope showed that grain boundaries have a minimal effect on short-circuit current density. However, current-voltage characteristics show some influence on open-circuit voltage.

Yeh, Y. C. M.↗
NASA NTRS1980

Solar-cell defect analyzer

Laser-Scanning System pinpoints imperfections in solar cells. Entire solar panels containing large numbers of cells can be scanned. Although technique is similar to use of scanning electron microscope (SEM) to locate microscopic imperfections, it differs in that large areas may be examined, including entire solar panels, and it is not necessary to remove cover glass or encapsulants.

Gauthier, M. K.↗
NASA NTRS1978

Rocket effluent: Its ice nucleation activity and related properties

To investigate the possibility of inadvertent weather modification from rocket effluent, aerosol samples were collected from an instrumented aircraft subsequent to the Voyager 1 and 2 launches. The aerosol's morphology, concentration, and size distribution were examined with an electron microscope. The elemental compositions of individual particles were analyzed with an X-ray energy spectrometer. Ice nucleus concentration was measured with a thermal diffusion chamber. The particles' physical and chemical properties were related to their ice nucleation activity. A laboratory experiment on rocket propellant exhaust was conducted under controlled conditions. Both laboratory and field experimental results indicated that rocket propellant exhaust can produce active ice nuclei and modify local weather in suitable meteorological conditions.

Parungo, F. P.↗
NASA NTRS1979

Characterization of the adsorption of water vapor and chlorine on microcrystalline silica

The characterization of water adsorption on silica is necessary to an understanding of how hydrogen chloride interacts with silica. The adsorption as a function of outgas temperatures of silica and as a function of the isotherm temperature was studied. Characterization of the silica structure by infrared analysis, X-ray diffraction and differential scanning calorimetry, surface area determinations, characterization of the sample surface by electron spectroscopy for chemical analysis (ESCA), and determinations of the heat of immersion in water of silica were investigated. The silica with a scanning electron microscope was examined.

Skiles, J. A.↗
NASA NTRS1979

GaAs solar cell development

The four (AlGa)As-GaAs solar cells were fabricated and will be delivered for radiation damage testing using 1 MeV electrons. These cells were LPE grown at 700 C for 4 minutes. The junction depth was measured to be 0.3 micron using a secondary electron microscope. The radiation model for the shallow junction cells was verified. Some mesa diodes were also fabricated and will be irradiated along with the cells for parallel evaluations of their electrical characteristics.

Source record↗
NASA NTRS1977

Analysis of aerospace nickel-cadmium battery cells

Various steps followed in analyzing the electrolyte, separator, and electrodes are reviewed. Specific emphasis is given to scanning electron microscopic and metallographic analysis of the plates. Cadmium migration is defined, its effects and causes are examined, and methods for its reduction in cells are suggested.

Eliason, R. R.↗