Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Modularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Space shuttle orbiter heat pipe applications. Volume 1: Synopsis

An investigation was made to formulate and evaluate heat pipe applications for the space shuttle orbiter. Of the twenty-seven specific applications which were identified, a joint evaluation resulted in the selection of five of the most promising ones for prototype development. The formulation process is described, along with the applications which evolved. The bulk of the discussion deals with the top five applications: (1) heat pipe augmented cold rail; (2) avionics heat pipe circuit; (3) heat pipe/phase change material modular sink; (4) air-to-heat-pipe heat exchanger; and (5) heat pipe radiator for compartment temperature control. The philosophy, physical design details, and performance data are presented for each concept along with a comparison to the baseline design where applicable. A sixth application, heat pipe space radiator for waste heat rejection, was also recommended for prototype development.

Alario, J. P.↗
NASA NTRS1972

Orbital operation study. Volume 3: Basic vehicle summaries

The vehicle related data developed during the orbital operations study are described. The interfacing activity findings have been realigned into the four basic vehicle systems as follows: (1) earth orbital shuttle (EOS), (2) research and applications module (RAM), (3) space based, ground based, manned and unmanned tugs, and (4) modular space station (MSS).

Anderson, N. R.↗
NASA NTRS1972

Design, fabrication and delivery of an improved single Elastic Loop Mobility System (ELMS)

Several significant design improvements have been incorporated into the second-generation full-scale ELMS unit. A major improved design accomplishment was the increase of the load carrying capacity of elastic loops without severe weight or stress penalties. Redesign of the loop form and size, plus selection of a more advanced titanium alloy, resulted in performance characteristics representing a marked improvement over the first-generation unit. Another important design improvement was the shaping of the loop's footprint into a favorable form for uniform pressure distribution. Other improvements are associated with a more efficient drive torque transmission from the internal drive drums to the elastic loop which are expected to reduce the internal losses of the drive system. The new ELMS unit will be capable of being integrated, on a modularized basis, with a multi-loop articulated ELMS test vehicle as the next logical step in the development of the mobility concept.

Trautwein, W.↗
NASA NTRS1972

Information management advanced development. Volume 1: Summary

The information management systems designed for the modular space station are discussed. Subjects presented are: (1) communications terminal breadboard configuration, (2) digital data bus breadboard configuration, (3) data processing assembly definition, and (4) computer program (software) assembly definition.

Gerber, C. R.↗
NASA NTRS1971

Multi-phase, 2-kilowatt, high-voltage, regulated power supply.

Development of a flight configured experimental power supply delivering 2 kw of conditioned power represents a concentrated effort at advancing the state-of-the-art in high voltage power supplies for space application. The power supply described herein was designed for use with the Jet Propulsion Laboratory (JPL) 20 cm Mercury Ion Thruster. However, its modularized design philosophy allows adaptation to various high voltage, high power requirements. Areas of principal concern are design of power and control circuits, performance parameters, packaging, efficiency, and weight.

Garth, D. R.↗
NASA NTRS1971

A nuclear powered air cushion freighter for the 1980's.

A design for a transoceanic, dry cargo-carrying freighter is suggested; its use and operation in port are discussed. With a gross weight of 4500 metric tons (5000 tons), more than 50 percent of which is cargo, it will cruise at 50 meters per second (100 knots) in waves 2.4 meters (8 ft) high. Its peripheral jet-flexible skirt air cushion concept and air thrustors will let the freighter go over waves 8 meters high at reduced velocity. Power comes from a 1280 megawatt, helium-cooled thermal reactor. It could dock at any major port in the world, but because it needs no surface contact, it could also travel inland to land-locked ports. A modular terminal design and methods of cargo transfer are suggested. The concept of cargo containerization influences both the freighter and terminal design.

Anderson, J. L.↗
NASA NTRS1972

Design of vortex fluid amplifiers with asymmetrical flow fields.

Variation of geometric parameters, including supply area, control area, chamber length, and outlet diameter, of a large scale, modular design vortex fluid amplifier with single supply and control jets, has confirmed and extended a previously published design method, developed for vortex amplifiers with symmetric flow fields. This allows application of the method to devices which are more representative of practical, production type components.

Lawley, T. J.↗
NASA NTRS1972

Heat pipe applications for the space shuttle.

Discussion of six specific applications for heat pipe (HP) devices on the space shuttle. These applications were chosen from 27 concepts formulated as part of a study to evaluate the potential benefits associated with HP use. The formulation process is briefly described along with the applications which evolved. The bulk of the discussion deals with the 'top' six - namely, HP radiators for waste heat rejection, an HP augmented cold rail, an HP circuit for electronic equipment cooling, modular heat sink for control of remote packages, an HP temperature control for compartments, and air-cooled equipment racks. The philosophy, physical design details, and performance data are presented for each concept along with a comparison with the baseline design where applicable.

Tawil, M.↗
NASA NTRS1972

Application of solar electric propulsion to comet and asteroid rendezvous and docking /CARD/ missions with sample return.

Summary of a feasibility study of CARD mission/system concepts for comet Encke and asteroid Eros missions in the late 1970s. A common planetary vehicle employing a modular SEP (solar electric propulsion) system and a direct rendezvous/docking mode with a staged science/sampling module appears feasible based on 1973 technology. The SEP system utilizes 3.5-kW, 3500-sec Isp mercury ion thrusters and rollout solar arrays sized at 36 (Encke) and 13 (Eros) kW based on the Titan III family launch vehicles. Science payloads, sampling concepts, and supporting spacecraft subsystems are defined. Problem areas are identified, and programmatic considerations are discussed.

Odom, P. R.↗
NASA NTRS1972

SEMMS - Understanding the solar electric multimission concept.

The feasibility of developing a solar electric multimission spacecraft (SEMMS) is examined with emphasis on understanding the effect of solar electric propulsion elements on a spacecraft system design. The applicability of Mariner, Viking, and thermoelectric outer planet spacecraft (TOPS) technologies to postulated mission/science objectives is investigated. A Mariner/Viking-based, modular spacecraft evolves which, with minimum modifications, is capable of performing a variety of interplanetary missions, including comet and asteroid rendezvous and orbit of Mercury, Jupiter, and Saturn. An early technology-evaluation flight is recommended to minimize the risk in subsequent missions.

Irace, W. R.↗
NASA NTRS1971

External fuel thermionic reactor system.

Thermionic reactors are prime candidates for nuclear electric propulsion. The national thermionic reactor effort is concentrated on the flashlight concept with the external-fuel concept as the backup. The external-fuel concept is very adaptable to a completely modular power subsystem which is attractive for highly reliable long-life applications. The 20- to 25-cm long, externally-fueled converters have been designed, fabricated, and successfully tested with many thermal cycles by electrical heating. However, difficulties have been encountered during encapsulation for nuclear heated tests and none have been started to date. These nuclear tests are required to demonstrate the concept feasibility.

Mondt, J. F.↗
NASA NTRS1972

An out-of-core thermionic-converter system for nuclear space power.

Reexamination of designs of nuclear thermionic space power systems with the converter outside the reactor in the perspective of recent advances in heat-transfer methods, materials, converter performance, and radiation design. The 40- to 70-kW(e) power range is treated. The configuration is found to meet the constraints of readily available launch vehicles. It allows for off-design operation including startup, shutdown, and possible emergency conditions; provides tolerance of failure by extensive use of modular, redundant elements; incorporates and uses heat pipes in a fashion that reduces the need for extensive in-pile testing of system components; and uses thermionic converters, nuclear fuel elements, and heat-transfer devices in a geometrical form adapted from existing incore thermionic system designs.

Breitwieser, R.↗
NASA NTRS1972

Techniques for generating highly reliable redundant systems.

A simple heuristic algorithm for designing highly reliable modularly redundant computer systems under complexity constraints is presented. The technique, which produces near optimal solutions, is intuitively appealing and easy to apply. The algorithms performance is shown to compare very well with the optimal solution obtained via a computerized model for dynamic programming.

White, J. B.↗
NASA NTRS1972

Development of STOLAND, a versatile navigation, guidance and control system.

STOLAND has been developed to perform navigation, guidance, control, and flight management experiments in advanced V/STOL aircraft. An integrated digital concept using modern avionics components was selected as the simplest approach to maximizing versatility and growth potential. Unique flexibility has been obtained by use of a single, general-purpose digital computer for all navigation, guidance, control, and displays computation. Modularity of the software insures easy change of experiments. The general-purpose computer is integrated with flexible pilot controls and with both electromechanical and CRT displays for maximum cockpit versatility. A complex hierarchy of control modes with safety monitors and interlocks has been provided.

Hansen, Q. M.↗
NASA NTRS1972

Stability and CMG wobble damping of flexible, spinning space stations.

Consideration of the uncontrolled vehicle stability and control moment gyro (CMG) wobble damping of two typical modular-spinning-space-station configurations. General stability trends are established as a function of structural parameters. Results of investigations using a unique CMG wobble damping concept are presented, and requirements are formulated. Modifications to the basic control law required as a result of structural flexibility are described. The majority of the analyses were performed with the aid of a digital simulation of the flexible body dynamics. The description of the vehicles, the flexible body simulation, and the CMG wobble damping concept are presented. Previously established theory is supported insofar as the stabilization and control problems associated with a minimum inertia type spinning spacecraft are shown to be significantly greater than those of a maximum inertia vehicle. For example, the maximum inertia configuration investigated is stable for all structural flexibility conditions studied, while the stability of the minimum inertia configuration is dependent upon the distribution of energy dissipating material throughout the structure.

Berman, H.↗
NASA NTRS1972

Atmosphere revitalization in the space station prototype.

The atmosphere revitalization group (ARG) for the space station prototype (SSP) environmental/thermal control and life support system (ETC/LSS) has been designed to meet a comprehensive set of requirements and constraints for a flight type mission. Design definition is for a modular vehicle temperature and humidity control subsystem, contaminant control equipment, a hydrogen depolarized cell CO2 concentrator, a water electrolysis oxygen generation subsystem, CO2 reduction equipment, and a pressure and composition control subsystem. Performance requirements are for support of a crew of six. Realistic leakage rates and metabolic activity cycles, cabin temperature selectability, and controlled cabin relative humidities are specified for the design. Operational aspects of the subsystem are discussed with emphasis given to the influence of a 180-day, maintainable requirement on system design. Consideration of flight vehicle type packaging, in flight maintenance, data management systems interface and fault detection capability, and electrical supply constraints is covered.

Trusch, R. B.↗
NASA NTRS1972

The Space Station Prototype Program - The development of a regenerative life support system for extended-duration missions.

Design concepts and test philosophies which may contribute to the development of a low-cost maintainable environmental control/life support system are examined. It is shown that the concept of producing flight prototype equipment during a developmental program can reduce the eventual cost of a flight system by incorporating realistic flight-type design requirements without imposing exacting design features and stringent controls. A flight prototype design is one that can be converted readily into an actual flight design without any conceptual change. Modularity of subsystems provides the system and the program a degree of flexibility relative to the eventual vehicle configuration and technological improvements.

Willis, N. C., Jr.↗