NREL Solves Residential Window Air Conditioner Performance Limitations [Fact Sheet]
Comprehensive performance tests lead to enhanced modeling capability and affordable methods to increase energy efficiency.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Comprehensive performance tests lead to enhanced modeling capability and affordable methods to increase energy efficiency.
The aim of this project is to develop a comprehensive framework that will lead to a fundamental description of both structural properties and reactions of light nuclei in terms of constituent protons and neutrons interacting through nucleon-nucleon (NN) and three-nucleon (NNN) forces. This project will provide the research community with the theoretical and computational tools that will enable: (1) an accurate prediction for fusion reactions that power stars and Earth-based fusion facilities; (2) an improved description of the spectroscopy of exotic nuclei, including light Borromean systems; and (3) a fundamental understanding of the three-nucleon force in nuclear reactions and nuclei at the drip line. To achieve this goal, we build upon a promising technique emerged recently as a candidate to reach a fundamental description of low-energy binary reactions between light ions, that is the ab initio no-core shell model combined with the resonating-group method (NCSM/RGM). This approach has demonstrated the capability to describe binary reactions below the three-body breakup threshold based, up to now, on similarity-renormalization-group (SRG) 5 evolved NN only potentials. To advance the understanding of nuclear reactions at low energies and light exotic nuclei, this project aims at extending the NCSM/RGM approach to include the full range of NNN interactions as well as the treatment of three-cluster bound and continuum states. Three-nucleon interactions are unavoidable components of a fundamental nuclear Hamiltonian obtained in a low-energy effective theory. In addition, three-nucleon force terms are induced by the SRG procedure and have to be taken into account for such a transformation to be unitary in many-body calculations. At the same time, the introduction of three-body cluster states is key to achieve a microscopic description of Borromean systems as well as three-body breakup reactions. This project will both enhance the fundamentality and enlarge the scope of our microscopic description of nuclear properties. A successful completion of this project will result in improved accuracy of the 3 He( 3 He,2p) 4 He and 3 He(α,γ) 7 Be reaction rates and consequently, in enhancement of the predictive capability of the standard solar model. In addition, we will study also the mirror reactions 3 H( 3 H,2n) 4 He and 3 H(α,γ) 7 Li (a key reaction for the production of 7 Li in the standard big-bang nucleosynthesis), and the spectroscopy of the 6 He, 6 Be, and 11 Li nuclei.
We employ the Integral Transport Matrix Method (ITMM) as the kernel of new parallel solution methods for the discrete ordinates approximation of the within-group neutron transport equation. The ITMM abandons the repetitive mesh sweeps of the traditional source iterations (SI) scheme in favor of constructing stored operators that account for the direct coupling factors among all the cells' fluxes and between the cells' and boundary surfaces' fluxes. The main goals of this work are to develop the algorithms that construct these operators and employ them in the solution process, determine the most suitable way to parallelize the entire procedure, and evaluate the behavior and parallel performance of the developed methods with increasing number of processes, P. The fastest observed parallel solution method, Parallel Gauss-Seidel (PGS), was used in a weak scaling comparison with the PARTISN transport code, which uses the source iteration (SI) scheme parallelized with the Koch-baker-Alcouffe (KBA) method. Compared to the state-of-the-art SI-KBA with diffusion synthetic acceleration (DSA), this new method- even without acceleration/preconditioning-is completitive for optically thick problems as P is increased to the tens of thousands range. For the most optically thick cells tested, PGS reduced execution time by an approximate factor of three for problems with more than 130 million computational cells on P = 32,768. Moreover, the SI-DSA execution times's trend rises generally more steeply with increasing P than the PGS trend. Furthermore, the PGS method outperforms SI for the periodic heterogeneous layers (PHL) configuration problems. The PGS method outperforms SI and SI-DSA on as few as P = 16 for PHL problems and reduces execution time by a factor of ten or more for all problems considered with more than 2 million computational cells on P = 4.096.
The aim of this project is to develop a comprehensive framework that will lead to a fundamental description of both structural properties and reactions of light nuclei in terms of constituent protons and neutrons interacting through nucleon-nucleon (NN) and three-nucleon (3N) forces. This project will provide the research community with the theoretical and computational tools what will enable: an accurate prediction for fusion reactions that power stars and Earth-based fusion facilities; an improved description of the spectroscopy of exotic nuclei, including light Borromean systems; and, a fundamental understanding of the three-nucleon force in nuclear reaction and nuclei at the drip line.
3D printing originally known as additive manufacturing is a process of making 3 dimensional solid objects from a CAD file. This ground breaking technology is widely used for industrial and biomedical purposes such as building objects, tools, body parts and cosmetics. An important benefit of 3D printing is the cost reduction and manufacturing flexibility; complex parts are built at the fraction of the price. However, layer by layer printing of complex shapes adds error due to the surface roughness. Any such error results in poor quality products with inaccurate dimensions. The main purpose of this research is to measure the amount of printing errors for parts with different geometric shapes and to analyze them for finding optimal printing settings to minimize the error. We use a Design of Experiments framework, and focus on studying parts with cone and ellipsoid shapes. We found that the orientation and the shape of geometric shapes have significant effect on the printing error. From our analysis, we also determined the optimal orientation that gives the least printing error.
This presentation discusses some of the challenges and successes of the quantitative benchmarking efforts performed at LANL.
A key objective of this 3 year research effort was to reduce the open circuit voltage (Voc) deficit, defined as the difference between the absorber band gap and the measured Voc to below 475mV from values at the beginning of this work of 630-730mV. To achieve this reduction, along with the attendant goals of higher Voc and efficiency, detailed studies into the fundamental understanding of existing limitations were undertaken.
The goal of this project is to find attactive scenarios with ideal, tearing, and RWM β N limits that are well above operating point in order to minimize feedback control.
Quantum materials exhibit a rich landscape of highly-degenerate quantum states that are widely regarded to hold vast potential for future applications, ranging from power management and transmission, to platforms for quantum computation, to novel versatile sensors and electronics. A key to realizing the promise of future applications is to identify the fundamental energy scales that control the emergence of such quantum states and their properties.
This lecture was presented at the 2017 LANL Parallel Computing Summer Research lecture and it describes the heat equation.
The goal of the ExaWind project is to enable predictive simulations of wind farms composed of many MW-scale turbines situated in complex terrain. Predictive simulations will require computational fluid dynamics (CFD) simulations for which the mesh resolves the geometry of the turbines, and captures the rotation and large deflections of blades. Whereas such simulations for a single turbine are arguably petascale class, multi-turbine wind farm simulations will require exascale-class resources.
The goal of the ExaWind project is to enable predictive simulations of wind farms composed of many MW-scale turbines situated in complex terrain. Predictive simulations will require computational fluid dynamics (CFD) simulations for which the mesh resolves the geometry of the turbines, and captures the rotation and large deflections of blades. Whereas such simulations for a single turbine are arguably petascale class, multi-turbine wind farm simulations will require exascale-class resources. The primary code in the ExaWind project is Nalu, which is an unstructured-grid solver for the acoustically-incompressible Navier-Stokes equations, and mass continuity is maintained through pressure projection. The model consists of the mass-continuity Poisson-type equation for pressure and a momentum equation for the velocity. For such modeling approaches, simulation times are dominated by linear-system setup and solution for the continuity and momentum systems. For the ExaWind challenge problem, the moving meshes greatly affect overall solver costs as re-initialization of matrices and re-computation of preconditioners is required at every time step We describe in this report our efforts to decrease the setup and solution time for the mass-continuity Poisson system with respect to the benchmark timing results reported in FY18 Q1. In particular, we investigate improving and evaluating two types of algebraic multigrid (AMG) preconditioners: Classical Ruge-Stfiben AMG (C-AMG) and smoothed-aggregation AMG (SA-AMG), which are implemented in the Hypre and Trilinos/MueLu software stacks, respectively. Preconditioner performance was optimized through existing capabilities and settings.
No abstract provided.
This report provides an overview of a workshop held on July 27-28, 2016 at Sandia National Laboratories in Albuquerque to itemize the DOE laboratory capabilties and provide a high level organization of those capabilties into a full evaluation framework for new computing paradigms that spans from fundamental breakthroughs in materials and devices to full system architectures and software environments.
The goal of the ExaWind project is to enable predictive simulations of wind farms composed of many MW-scale turbines situated in complex terrain. Predictive simulations will require computational fluid dynamics (CFD) simulations for which the mesh resolves the geometry of the turbines, and captures the rotation and large deflections of blades. Whereas such simulations for a single turbine are arguably petascale class, multi-turbine wind farm simulations will require exascale-class resources. We describe in this report our efforts to decrease the setup and solution time for the mass-continuity Poisson system with respect to the benchmark timing results reported in FY18 Q1. In particular, we investigate improving and evaluating two types of algebraic multigrid (AMG) preconditioners: Classical Ruge-Stfiben AMG (C-AMG) and smoothed-aggregation AMG (SA-AMG), which are implemented in the Hypre and Trilinos/MueLu software stacks, respectively.
Imagine our world without modern plastics—they are everywhere, from construction and electronics to transportation and packaging. Overall strength and durability make plastic so useful, but they also make plastic a leading contributor to the world’s pollution problem. According to a study performed by the National Center for Ecological Analysis and Synthesis at the University of California–Santa Barbara, as much as 13 million metric tons of plastic end up in the world’s oceans each year. This study also found that about one-half of the 300 million tons of plastic produced worldwide annually is used only once. To put these numbers into perspective, in 2014 the United States alone sold more than 100 billion plastic beverage bottles that account for 14 percent of America’s pollution problem, despite recycling efforts. Plastics can take up to 1,000 years to decompose in landfills and oceans. Thinner plastics, such as those used for water bottles, can take more than 450 years to degrade—that’s still a long time. To address this worldwide problem, scientists at Los Alamos National Laboratory have come together to develop an alternative method to sustainably manufacture plastic that is not only durable but is easily biodegradable.
Abstract not provided.